]> git.madduck.net Git - code/vcsh.git/blobdiff - vcsh

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

vcsh.1.ronn: Make the warning even more scary
[code/vcsh.git] / vcsh
diff --git a/vcsh b/vcsh
index 15ea0984f87a0540caef0c146fb76ca481d2bf86..301151a1d6d83ca10e678957300819ff50de5c3d 100755 (executable)
--- a/vcsh
+++ b/vcsh
@@ -1,30 +1,26 @@
 #!/bin/sh
 
 # This program is licensed under the GNU GPL version 2 or later.
 #!/bin/sh
 
 # This program is licensed under the GNU GPL version 2 or later.
-# (c) Richard "RichiH" Hartmann <richih.mailinglist@gmail.com>, 2011-2013
+# (c) Richard "RichiH" Hartmann <richih@debian.org>, 2011-2014
 # For details, see LICENSE. To submit patches, you have to agree to
 # license your code under the GNU GPL version 2 or later.
 
 # While the following is not legally binding, the author would like to
 # explain the choice of GPLv2+ over GPLv3+.
 # The author prefers GPLv3+ over GPLv2+ but feels it's better to maintain
 # For details, see LICENSE. To submit patches, you have to agree to
 # license your code under the GNU GPL version 2 or later.
 
 # While the following is not legally binding, the author would like to
 # explain the choice of GPLv2+ over GPLv3+.
 # The author prefers GPLv3+ over GPLv2+ but feels it's better to maintain
-# full compatibility's with git. In case git ever changes its licensing terms,
+# full compatibility's with Git. In case Git ever changes its licensing terms,
 # which is admittedly extremely unlikely to the point of being impossible,
 # this software will most likely follow suit.
 
 # This should always be the first line of code to facilitate debugging
 [ -n "$VCSH_DEBUG" ] && set -vx
 
 # which is admittedly extremely unlikely to the point of being impossible,
 # this software will most likely follow suit.
 
 # This should always be the first line of code to facilitate debugging
 [ -n "$VCSH_DEBUG" ] && set -vx
 
-basename() {
-       # Implemented in shell to avoid spawning another process
-       local file
-       file="${1##*/}"
-       [ -z "$2" ] || file="${file%$2}"
-       echo "$file"
-}
 
 
+# If '.git-HEAD' is appended to the version, you are seeing an unreleased
+# version of vcsh; the master branch is supposed to be clean at all times
+# so you can most likely just use it nonetheless
+VERSION='1.20141009'
 SELF=$(basename $0)
 SELF=$(basename $0)
-VERSION='1.20130614'
 
 fatal() {
        echo "$SELF: fatal: $1" >&2
 
 fatal() {
        echo "$SELF: fatal: $1" >&2
@@ -35,14 +31,16 @@ fatal() {
 # options that will modify our behaviour.
 # Commands are handled at the end of this script.
 while getopts "c:dv" flag; do
 # options that will modify our behaviour.
 # Commands are handled at the end of this script.
 while getopts "c:dv" flag; do
-       if [ "$1" = '-d' ] || [ "$1" = '--debug' ]; then
+       if [ x"$1" = x'-d' ] || [ x"$1" = x'--debug' ]; then
                set -vx
                VCSH_DEBUG=1
                set -vx
                VCSH_DEBUG=1
+               echo "debug mode on"
                echo "$SELF $VERSION"
                echo "$SELF $VERSION"
-       elif [ "$1" = '-v' ];then
+       elif [ x"$1" = x'-v' ]; then
                VCSH_VERBOSE=1
                VCSH_VERBOSE=1
+               echo "verbose mode on"
                echo "$SELF $VERSION"
                echo "$SELF $VERSION"
-       elif [ "$1" = '-c' ];then
+       elif [ x"$1" = x'-c' ]; then
                VCSH_OPTION_CONFIG=$OPTARG
        fi
        shift 1
                VCSH_OPTION_CONFIG=$OPTARG
        fi
        shift 1
@@ -50,7 +48,7 @@ done
 
 source_all() {
        # Source file even if it's in $PWD and does not have any slashes in it
 
 source_all() {
        # Source file even if it's in $PWD and does not have any slashes in it
-       case "$1" in
+       case $1 in
                */*) . "$1";;
                *)   . "$PWD/$1";;
        esac;
                */*) . "$1";;
                *)   . "$PWD/$1";;
        esac;
@@ -59,7 +57,7 @@ source_all() {
 
 # Read configuration and set defaults if anything's not set
 [ -n "$VCSH_DEBUG" ]                  && set -vx
 
 # Read configuration and set defaults if anything's not set
 [ -n "$VCSH_DEBUG" ]                  && set -vx
-[ -z "$XDG_CONFIG_HOME" ]             && XDG_CONFIG_HOME="$HOME/.config"
+: ${XDG_CONFIG_HOME:="$HOME/.config"}
 
 # Read configuration files if there are any
 [ -r "/etc/vcsh/config" ]             && . "/etc/vcsh/config"
 
 # Read configuration files if there are any
 [ -r "/etc/vcsh/config" ]             && . "/etc/vcsh/config"
@@ -75,10 +73,21 @@ fi
 [ -n "$VCSH_DEBUG" ]                  && set -vx
 
 # Read defaults
 [ -n "$VCSH_DEBUG" ]                  && set -vx
 
 # Read defaults
-[ -z "$VCSH_REPO_D" ]                 && VCSH_REPO_D="$XDG_CONFIG_HOME/vcsh/repo.d"
-[ -z "$VCSH_HOOK_D" ]                 && VCSH_HOOK_D="$XDG_CONFIG_HOME/vcsh/hooks-enabled"
-[ -z "$VCSH_BASE" ]                   && VCSH_BASE="$HOME"
-[ -z "$VCSH_GITIGNORE" ]              && VCSH_GITIGNORE='exact'
+: ${VCSH_REPO_D:="$XDG_CONFIG_HOME/vcsh/repo.d"}
+: ${VCSH_HOOK_D:="$XDG_CONFIG_HOME/vcsh/hooks-enabled"}
+: ${VCSH_OVERLAY_D:="$XDG_CONFIG_HOME/vcsh/overlays-enabled"}
+: ${VCSH_BASE:="$HOME"}
+: ${VCSH_GITIGNORE:=exact}
+: ${VCSH_GITATTRIBUTES:=none}
+: ${VCSH_WORKTREE:=absolute}
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+       fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ] && [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+       fatal "'\$VCSH_WORKTREE' must equal 'absolute', or 'relative'" 1
+fi
 
 
 help() {
 
 
 help() {
@@ -92,6 +101,7 @@ help() {
    commands:
    clone <remote> \\
          [<repo>]       Clone from an existing repository
    commands:
    clone <remote> \\
          [<repo>]       Clone from an existing repository
+   commit               Commit in all repositories
    delete <repo>        Delete an existing repository
    enter <repo>         Enter repository; spawn new instance of \$SHELL
    help                 Display this help text
    delete <repo>        Delete an existing repository
    enter <repo>         Enter repository; spawn new instance of \$SHELL
    help                 Display this help text
@@ -106,6 +116,7 @@ help() {
           <newname>     Rename repository
    run <repo> \\
        <command>        Use this repository
           <newname>     Rename repository
    run <repo> \\
        <command>        Use this repository
+   status [<repo>]      Show statuses of all/one vcsh repositories
    upgrade <repo>       Upgrade repository to currently recommended settings
    version              Print version information
    which <substring>    Find substring in name of any tracked file
    upgrade <repo>       Upgrade repository to currently recommended settings
    version              Print version information
    which <substring>    Find substring in name of any tracked file
@@ -143,16 +154,33 @@ clone() {
                exit
        fi
        git fetch
                exit
        fi
        git fetch
-       for object in $(git ls-tree -r origin/master | awk '{print $4}'); do
+       hook pre-merge
+       git ls-tree -r --name-only origin/master | (while read object; do
                [ -e "$object" ] &&
                        error "'$object' exists." &&
                [ -e "$object" ] &&
                        error "'$object' exists." &&
-                       VCSH_CONFLICT=1;
+                       VCSH_CONFLICT=1
        done
        done
-       [ "$VCSH_CONFLICT" = '1' ] &&
+       [ x"$VCSH_CONFLICT" = x'1' ]) &&
                fatal "will stop after fetching and not try to merge!
                fatal "will stop after fetching and not try to merge!
-  Once this situation has been resolved, run 'vcsh run $VCSH_REPO_NAME git pull' to finish cloning.\n" 17
+  Once this situation has been resolved, run 'vcsh $VCSH_REPO_NAME pull' to finish cloning." 17
        git merge origin/master
        git merge origin/master
+       hook post-merge
        hook post-clone
        hook post-clone
+       retire
+       hook post-clone-retired
+}
+
+commit() {
+       hook pre-commit
+       for VCSH_REPO_NAME in $(list); do
+               echo "$VCSH_REPO_NAME: "
+               GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+               use
+               git commit --untracked-files=no --quiet
+               VCSH_COMMAND_RETURN_CODE=$?
+               echo
+       done
+       hook post-commit
 }
 
 delete() {
 }
 
 delete() {
@@ -186,7 +214,7 @@ git_dir_exists() {
 }
 
 hook() {
 }
 
 hook() {
-       for hook in $VCSH_HOOK_D/$1* $VCSH_HOOK_D/$VCSH_REPO_NAME.$1*; do
+       for hook in "$VCSH_HOOK_D/$1"* "$VCSH_HOOK_D/$VCSH_REPO_NAME.$1"*; do
                [ -x "$hook" ] || continue
                verbose "executing '$hook'"
                "$hook"
                [ -x "$hook" ] || continue
                verbose "executing '$hook'"
                "$hook"
@@ -194,43 +222,48 @@ hook() {
 }
 
 init() {
 }
 
 init() {
+       hook pre-init
        [ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
        [ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
-       export GIT_WORK_TREE="$VCSH_BASE"
-       mkdir -p "$GIT_WORK_TREE" || fatal "could not create '$GIT_WORK_TREE'" 50
-       cd "$GIT_WORK_TREE" || fatal "could not enter '$GIT_WORK_TREE'" 11
-       git init
+       mkdir -p "$VCSH_BASE" || fatal "could not create '$VCSH_BASE'" 50
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       git init --shared=0600
        upgrade
        upgrade
+       hook post-init
 }
 
 list() {
        for repo in "$VCSH_REPO_D"/*.git; do
 }
 
 list() {
        for repo in "$VCSH_REPO_D"/*.git; do
-               [ -d "$repo" ] && [ -r "$repo" ] && echo $(basename "$repo" .git)
+               [ -d "$repo" ] && [ -r "$repo" ] && echo "$(basename "$repo" .git)"
        done
 }
 
 get_files() {
        done
 }
 
 get_files() {
-       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
        git ls-files
 }
 
 list_tracked() {
        for VCSH_REPO_NAME in $(list); do
                get_files
        git ls-files
 }
 
 list_tracked() {
        for VCSH_REPO_NAME in $(list); do
                get_files
-       done | sort -u
+       done | sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | \
+           sed 's/[,\&]/\\&/g')," | sort -u
 }
 
 list_tracked_by() {
        use
 }
 
 list_tracked_by() {
        use
-       git ls-files | sort -u
+       git ls-files | sed "s,^,$(printf '%s\n' "$VCSH_BASE/" | \
+           sed 's/[,\&]/\\&/g')," | sort -u
 }
 
 pull() {
        hook pre-pull
        for VCSH_REPO_NAME in $(list); do
 }
 
 pull() {
        hook pre-pull
        for VCSH_REPO_NAME in $(list); do
-               echo -n "$VCSH_REPO_NAME: "
-               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               printf '%s: ' "$VCSH_REPO_NAME"
+               GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
                use
                git pull
                use
                git pull
+               VCSH_COMMAND_RETURN_CODE=$?
+               echo
        done
        hook post-pull
 }
        done
        hook post-pull
 }
@@ -238,16 +271,17 @@ pull() {
 push() {
        hook pre-push
        for VCSH_REPO_NAME in $(list); do
 push() {
        hook pre-push
        for VCSH_REPO_NAME in $(list); do
-               echo -n "$VCSH_REPO_NAME: "
-               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               printf '%s: ' "$VCSH_REPO_NAME"
+               GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
                use
                git push
                use
                git push
+               VCSH_COMMAND_RETURN_CODE=$?
+               echo
        done
        hook post-push
 }
 
 retire() {
        done
        hook post-push
 }
 
 retire() {
-       unset GIT_WORK_TREE
        unset VCSH_DIRECTORY
 }
 
        unset VCSH_DIRECTORY
 }
 
@@ -256,57 +290,108 @@ rename() {
        [ -d "$GIT_DIR_NEW" ] && fatal "'$GIT_DIR_NEW' exists" 54
        mv -f "$GIT_DIR" "$GIT_DIR_NEW" || fatal "Could not mv '$GIT_DIR' '$GIT_DIR_NEW'" 52
 
        [ -d "$GIT_DIR_NEW" ] && fatal "'$GIT_DIR_NEW' exists" 54
        mv -f "$GIT_DIR" "$GIT_DIR_NEW" || fatal "Could not mv '$GIT_DIR' '$GIT_DIR_NEW'" 52
 
+       # Now that the repository has been renamed, we need to fix up its configuration
+       # Overwrite old name..
+       GIT_DIR=$GIT_DIR_NEW
+       VCSH_REPO_NAME=$VCSH_REPO_NAME_NEW
+       # ..and clobber all old configuration
+       upgrade
 }
 
 run() {
        hook pre-run
        use
        "$@"
 }
 
 run() {
        hook pre-run
        use
        "$@"
+       VCSH_COMMAND_RETURN_CODE=$?
        hook post-run
 }
 
        hook post-run
 }
 
+status() {
+       if [ -n "$VCSH_REPO_NAME" ]; then
+               GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+               use
+               git status --short --untracked-files='no'
+               VCSH_COMMAND_RETURN_CODE=$?
+       else
+               for VCSH_REPO_NAME in $(list); do
+                       echo "$VCSH_REPO_NAME:"
+                       GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+                       use
+                       git status --short --untracked-files='no'
+                       VCSH_COMMAND_RETURN_CODE=$?
+                       echo
+               done
+       fi
+}
+
 upgrade() {
        hook pre-upgrade
 upgrade() {
        hook pre-upgrade
+       # fake-bare repositories are not bare, actually. Set this to false
+       # because otherwise Git complains "fatal: core.bare and core.worktree
+       # do not make sense"
+       git config core.bare false
+       # core.worktree may be absolute or relative to $GIT_DIR, depending on
+       # user preference
+       if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ]; then
+               git config core.worktree "$(cd "$GIT_DIR" && GIT_WORK_TREE=$VCSH_BASE git rev-parse --show-cdup)"
+       elif [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+               git config core.worktree "$VCSH_BASE"
+       fi
+       [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && git config core.excludesfile ".gitignore.d/$VCSH_REPO_NAME"
+       [ ! "x$VCSH_GITATTRIBUTES" = 'xnone' ] && git config core.attributesfile ".gitattributes.d/$VCSH_REPO_NAME"
+       git config vcsh.vcsh 'true'
        use
        use
-       git config core.worktree     "$GIT_WORK_TREE"
-       git config core.excludesfile ".gitignore.d/$VCSH_REPO_NAME"
-       git config vcsh.vcsh         'true'
        [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME"
        [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME"
+       [ -e "$VCSH_BASE/.gitattributes.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitattributes.d/$VCSH_REPO_NAME"
        hook post-upgrade
 }
 
 use() {
        git_dir_exists
        hook post-upgrade
 }
 
 use() {
        git_dir_exists
-       export GIT_WORK_TREE="$(git config --get core.worktree)"
-       export VCSH_DIRECTORY="$VCSH_REPO_NAME"
+       VCSH_DIRECTORY=$VCSH_REPO_NAME; export VCSH_DIRECTORY
 }
 
 which() {
 }
 
 which() {
+       [ -e "$VCSH_COMMAND_PARAMETER" ] || fatal "'$VCSH_COMMAND_PARAMETER' does not exist" 1
        for VCSH_REPO_NAME in $(list); do
                for VCSH_FILE in $(get_files); do
        for VCSH_REPO_NAME in $(list); do
                for VCSH_FILE in $(get_files); do
-                       echo $VCSH_FILE | grep -q "$VCSH_COMMAND_PARAMETER" && echo "$VCSH_REPO_NAME: $VCSH_FILE"
+                       echo "$VCSH_FILE" | grep -q "$VCSH_COMMAND_PARAMETER" && echo "$VCSH_REPO_NAME: $VCSH_FILE"
                done
        done | sort -u
 }
 
 write_gitignore() {
                done
        done | sort -u
 }
 
 write_gitignore() {
+       # Don't do anything if the user does not want to write gitignore
+       if [ "x$VCSH_GITIGNORE" = 'xnone' ]; then
+               info "Not writing gitignore as '\$VCSH_GITIGNORE' is set to 'none'"
+               exit
+       fi
+
        use
        cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
        use
        cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       OLDIFS=$IFS
+       IFS=$(printf '\n\t')
        gitignores=$(for file in $(git ls-files); do
                while true; do
        gitignores=$(for file in $(git ls-files); do
                while true; do
-                       echo $file; new="${file%/*}"
-                       [ "$file" = "$new" ] && break
-                       file="$new"
+                       echo "$file"; new=${file%/*}
+                       [ x"$file" = x"$new" ] && break
+                       file=$new
                done;
        done | sort -u)
                done;
        done | sort -u)
-       tempfile=$(mktemp) || fatal "could not create tempfile" 51
+
+       # Contrary to GNU mktemp, mktemp on BSD/OSX requires a template for temp files
+       # Using a template makes GNU mktemp default to $PWD and not #TMPDIR for tempfile location
+       # To make every OS happy, set full path explicitly
+       tempfile=$(mktemp "${TMPDIR:-/tmp}/tmp.XXXXXXXXXX") || fatal "could not create tempfile: '${tempfile}'" 51
+
        echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
        for gitignore in $gitignores; do
                echo "$gitignore" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
        echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
        for gitignore in $gitignores; do
                echo "$gitignore" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
-               if [ x$VCSH_GITIGNORE = x'recursive' ] && [ -d "$gitignore" ]; then
+               if [ "x$VCSH_GITIGNORE" = 'xrecursive' ] && [ -d "$gitignore" ]; then
                        { echo "$gitignore/*" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57; }
                fi
        done
                        { echo "$gitignore/*" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57; }
                fi
        done
+       IFS=$OLDIFS
        if diff -N "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" > /dev/null; then
                rm -f "$tempfile" || error "could not delete '$tempfile'"
                exit
        if diff -N "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" > /dev/null; then
                rm -f "$tempfile" || error "could not delete '$tempfile'"
                exit
@@ -320,59 +405,83 @@ write_gitignore() {
                fatal "could not move '$tempfile' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME'" 53
 }
 
                fatal "could not move '$tempfile' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME'" 53
 }
 
-if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
-       fatal "'\$VCSH_GITIGNORE' must be either 'exact' or 'recursive'" 1
+debug $(git version)
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+       fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
 fi
 
 fi
 
-if [ "$1" = 'clone' ]; then
-       [ -z "$2" ] && fatal "$1: please specify a remote" 1
-       export VCSH_COMMAND="$1"
+VCSH_COMMAND=$1; export VCSH_COMMAND
+
+case $VCSH_COMMAND in
+       clon|clo|cl) VCSH_COMMAND=clone;;
+       commi|comm|com|co) VCSH_COMMAND=commit;;
+       delet|dele|del|de) VCSH_COMMAND=delete;;
+       ente|ent|en) VCSH_COMMAND=enter;;
+       hel|he) VCSH_COMMAND=help;;
+       ini|in) VCSH_COMMAND=init;;
+       pul) VCSH_COMMAND=pull;;
+       pus) VCSH_COMMAND=push;;
+       renam|rena|ren|re) VCSH_COMMAND=rename;;
+       ru) VCSH_COMMAND=run;;
+       statu|stat|sta|st) VCSH_COMMAND=status;;
+       upgrad|upgra|upgr|up) VCSH_COMMAND=upgrade;;
+       versio|versi|vers|ver|ve) VCSH_COMMAND=version;;
+       which|whi|wh) VCSH_COMMAND=which;;
+       write|writ|wri|wr) VCSH_COMMAND=write-gitignore;;
+esac    
+
+if [ x"$VCSH_COMMAND" = x'clone' ]; then
+       [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a remote" 1
        GIT_REMOTE="$2"
        GIT_REMOTE="$2"
-       [ -n "$3" ] && VCSH_REPO_NAME="$3" || VCSH_REPO_NAME=$(basename "$GIT_REMOTE" .git)
+       [ -n "$3" ] && VCSH_REPO_NAME=$3 || VCSH_REPO_NAME=$(basename "${GIT_REMOTE#*:}" .git)
+       [ -z "$VCSH_REPO_NAME" ] && fatal "$VCSH_COMMAND: could not determine repository name" 1
        export VCSH_REPO_NAME
        export VCSH_REPO_NAME
-       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
-elif [ "$1" = 'version' ]; then
+       GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+elif [ "$VCSH_COMMAND" = 'version' ]; then
        echo "$SELF $VERSION"
        echo "$SELF $VERSION"
+       git version
        exit
        exit
-elif [ "$1" = 'which' ]; then
-       [ -z "$2" ] && fatal "$1: please specify a filename" 1
-       [ -n "$3" ] && fatal "$1: too many parameters" 1
-       export VCSH_COMMAND="$1"
-       export VCSH_COMMAND_PARAMETER="$2"
-elif [ "$1" = 'delete' ]           ||
-     [ "$1" = 'enter' ]            ||
-     [ "$1" = 'init' ]             ||
-     [ "$1" = 'list-tracked-by' ]  ||
-     [ "$1" = 'rename' ]           ||
-     [ "$1" = 'run' ]              ||
-     [ "$1" = 'upgrade' ]          ||
-     [ "$1" = 'write-gitignore' ]; then
-       [ -z $2 ]                      && fatal "$1: please specify repository to work on" 1
-       [ "$1" = 'rename' -a -z "$3" ] && fatal "$1: please specify a target name" 1
-       [ "$1" = 'run' -a -z "$3" ]    && fatal "$1: please specify a command" 1
-       export VCSH_COMMAND="$1"
-       export VCSH_REPO_NAME="$2"
-       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
-       [ "$VCSH_COMMAND" = 'rename' ]         && export GIT_DIR_NEW="$VCSH_REPO_D/$3.git"
-       [ "$VCSH_COMMAND" = 'run' ] && shift 2
-       [ "$VCSH_COMMAND" = 'write-gitignore' ]
-elif [ "$1" = 'list' ] ||
-     [ "$1" = 'list-tracked' ] ||
-     [ "$1" = 'pull' ] ||
-     [ "$1" = 'push' ]; then
-       export VCSH_COMMAND="$1"
+elif [ x"$VCSH_COMMAND" = x'which' ]; then
+       [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a filename" 1
+       [ -n "$3" ] && fatal "$VCSH_COMMAND: too many parameters" 1
+       VCSH_COMMAND_PARAMETER=$2; export VCSH_COMMAND_PARAMETER
+elif [ x"$VCSH_COMMAND" = x'delete' ]           ||
+     [ x"$VCSH_COMMAND" = x'enter' ]            ||
+     [ x"$VCSH_COMMAND" = x'init' ]             ||
+     [ x"$VCSH_COMMAND" = x'list-tracked-by' ]  ||
+     [ x"$VCSH_COMMAND" = x'rename' ]           ||
+     [ x"$VCSH_COMMAND" = x'run' ]              ||
+     [ x"$VCSH_COMMAND" = x'upgrade' ]          ||
+     [ x"$VCSH_COMMAND" = x'write-gitignore' ]; then
+       [ -z "$2" ]                                     && fatal "$VCSH_COMMAND: please specify repository to work on" 1
+       [ x"$VCSH_COMMAND" = x'rename' ] && [ -z "$3" ] && fatal "$VCSH_COMMAND: please specify a target name" 1
+       [ x"$VCSH_COMMAND" = x'run'    ] && [ -z "$3" ] && fatal "$VCSH_COMMAND: please specify a command" 1
+       VCSH_REPO_NAME=$2; export VCSH_REPO_NAME
+       GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+       [ x"$VCSH_COMMAND" = x'rename' ] && { VCSH_REPO_NAME_NEW=$3; export VCSH_REPO_NAME_NEW;
+                                             GIT_DIR_NEW=$VCSH_REPO_D/$VCSH_REPO_NAME_NEW.git; export GIT_DIR_NEW; }
+       [ x"$VCSH_COMMAND" = x'run' ]    && shift 2
+elif [ x"$VCSH_COMMAND" = x'commit' ] ||
+     [ x"$VCSH_COMMAND" = x'list'   ] ||
+     [ x"$VCSH_COMMAND" = x'list-tracked' ] ||
+     [ x"$VCSH_COMMAND" = x'pull'   ] ||
+     [ x"$VCSH_COMMAND" = x'push'   ]; then
+       :
+elif [ x"$VCSH_COMMAND" = x'status' ]; then
+       VCSH_REPO_NAME=$2; export VCSH_REPO_NAME
 elif [ -n "$2" ]; then
 elif [ -n "$2" ]; then
-       export VCSH_COMMAND='run'
-       export VCSH_REPO_NAME="$1"
-       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
-       [ -d $GIT_DIR ] || { help; exit 1; }
+       VCSH_COMMAND='run'; export VCSH_COMMAND
+       VCSH_REPO_NAME=$1; export VCSH_REPO_NAME
+       GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+       [ -d "$GIT_DIR" ] || { help; exit 1; }
        shift 1
        set -- "git" "$@"
        shift 1
        set -- "git" "$@"
-elif [ -n "$1" ]; then
-       export VCSH_COMMAND='enter'
-       export VCSH_REPO_NAME="$1"
-       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
-       [ -d $GIT_DIR ] || { help; exit 1; }
+elif [ -n "$VCSH_COMMAND" ]; then
+       VCSH_COMMAND='enter'; export VCSH_COMMAND
+       VCSH_REPO_NAME=$1; export VCSH_REPO_NAME
+       GIT_DIR=$VCSH_REPO_D/$VCSH_REPO_NAME.git; export GIT_DIR
+       [ -d "$GIT_DIR" ] || { help; exit 1; }
 else
        # $1 is empty, or 'help'
        help && exit
 else
        # $1 is empty, or 'help'
        help && exit
@@ -380,27 +489,39 @@ fi
 
 # Did we receive a directory instead of a name?
 # Mangle the input to fit normal operation.
 
 # Did we receive a directory instead of a name?
 # Mangle the input to fit normal operation.
-if echo $VCSH_REPO_NAME | grep -q '/'; then
-       export GIT_DIR=$VCSH_REPO_NAME
-       export VCSH_REPO_NAME=$(basename "$VCSH_REPO_NAME" .git)
+if echo "$VCSH_REPO_NAME" | grep -q '/'; then
+       GIT_DIR=$VCSH_REPO_NAME; export GIT_DIR
+       VCSH_REPO_NAME=$(basename "$VCSH_REPO_NAME" .git); export VCSH_REPO_NAME
 fi
 
 fi
 
-
-for check_directory in "$VCSH_REPO_D" "$VCSH_BASE/.gitignore.d"
-do
+check_dir() {
+       check_directory="$1"
        if [ ! -d "$check_directory" ]; then
                if [ -e "$check_directory" ]; then
                        fatal "'$check_directory' exists but is not a directory" 13
                else
        if [ ! -d "$check_directory" ]; then
                if [ -e "$check_directory" ]; then
                        fatal "'$check_directory' exists but is not a directory" 13
                else
-                       info "attempting to create '$check_directory'"
+                       verbose "attempting to create '$check_directory'"
                        mkdir -p "$check_directory" || fatal "could not create '$check_directory'" 50
                fi
        fi
                        mkdir -p "$check_directory" || fatal "could not create '$check_directory'" 50
                fi
        fi
-done
+}
+
+check_dir "$VCSH_REPO_D"
+[ ! "x$VCSH_GITIGNORE" = 'xnone' ] && check_dir "$VCSH_BASE/.gitignore.d"
+[ ! "x$VCSH_GITATTRIBUTES" = 'xnone' ] && check_dir "$VCSH_BASE/.gitattributes.d"
 
 verbose "$VCSH_COMMAND begin"
 
 verbose "$VCSH_COMMAND begin"
-export VCSH_COMMAND=$(echo $VCSH_COMMAND | sed 's/-/_/g')
+VCSH_COMMAND=$(echo "$VCSH_COMMAND" | sed 's/-/_/g'); export VCSH_COMMAND
+
+# source overlay functions
+for overlay in "$VCSH_OVERLAY_D/$VCSH_COMMAND"* "$VCSH_OVERLAY_D/$VCSH_REPO_NAME.$VCSH_COMMAND"*; do
+       [ -r "$overlay" ] || continue
+       info "sourcing '$overlay'"
+       . "$overlay"
+done
+
 hook pre-command
 $VCSH_COMMAND "$@"
 hook post-command
 verbose "$VCSH_COMMAND end, exiting"
 hook pre-command
 $VCSH_COMMAND "$@"
 hook post-command
 verbose "$VCSH_COMMAND end, exiting"
+exit $VCSH_COMMAND_RETURN_CODE