]> git.madduck.net Git - code/vcsh.git/blobdiff - vcsh

madduck's git repository

Every one of the projects in this repository is available at the canonical URL git://git.madduck.net/madduck/pub/<projectpath> — see each project's metadata for the exact URL.

All patches and comments are welcome. Please squash your changes to logical commits before using git-format-patch and git-send-email to patches@git.madduck.net. If you'd read over the Git project's submission guidelines and adhered to them, I'd be especially grateful.

SSH access, as well as push access can be individually arranged.

If you use my repositories frequently, consider adding the following snippet to ~/.gitconfig and using the third clone URL listed for each project:

[url "git://git.madduck.net/madduck/"]
  insteadOf = madduck:

vcsh: Support whitespace in filenames for gitignore
[code/vcsh.git] / vcsh
diff --git a/vcsh b/vcsh
index c1b4874f5e78bcbbe5a8c8ccb2276f3ed25d23d9..8532a29b813538efda620604c39f663ac578ee78 100755 (executable)
--- a/vcsh
+++ b/vcsh
 #!/bin/sh
 
 #!/bin/sh
 
-[ -n "$VCSH_DEBUG" ] && set -x
+# This program is licensed under the GNU GPL version 2 or later.
+# (c) Richard "RichiH" Hartmann <richih@debian.org>, 2011-2013
+# For details, see LICENSE. To submit patches, you have to agree to
+# license your code under the GNU GPL version 2 or later.
 
 
+# While the following is not legally binding, the author would like to
+# explain the choice of GPLv2+ over GPLv3+.
+# The author prefers GPLv3+ over GPLv2+ but feels it's better to maintain
+# full compatibility's with Git. In case Git ever changes its licensing terms,
+# which is admittedly extremely unlikely to the point of being impossible,
+# this software will most likely follow suit.
+
+# This should always be the first line of code to facilitate debugging
+[ -n "$VCSH_DEBUG" ] && set -vx
+
+
+# If '.git-HEAD' is appended to the version, you are seeing an unreleased
+# version of vcsh; the master branch is supposed to be clean at all times
+# so you can most likely just use it nonetheless
+VERSION='1.20131229.git-HEAD'
 SELF=$(basename $0)
 
 SELF=$(basename $0)
 
-[ -z "$XDG_CONFIG_HOME" ] && XDG_CONFIG_HOME="$HOME/.config"
-[ -z "$VCSH_BASE" ]       && VCSH_BASE="$XDG_CONFIG_HOME/vcsh/repo.d"
-for check_directory in "$VCSH_BASE"
-do
-       if [ ! -d "$check_directory" ]; then
-               if [ -e "$check_directory" ]; then
-                       echo "$SELF: error: $check_directory exists but is not a directory" >&2
-                       exit 2
-               else
-                       mkdir -p "$check_directory" || (echo "$SELF: error: could not create $check_directory" >&2; exit 2)
-               fi
+fatal() {
+       echo "$SELF: fatal: $1" >&2
+       exit $2
+}
+
+# We need to run getops as soon as possible so we catch -d and other
+# options that will modify our behaviour.
+# Commands are handled at the end of this script.
+while getopts "c:dv" flag; do
+       if [ "$1" = '-d' ] || [ "$1" = '--debug' ]; then
+               set -vx
+               VCSH_DEBUG=1
+               echo "debug mode on"
+               echo "$SELF $VERSION"
+       elif [ "$1" = '-v' ]; then
+               VCSH_VERBOSE=1
+               echo "verbose mode on"
+               echo "$SELF $VERSION"
+       elif [ "$1" = '-c' ]; then
+               VCSH_OPTION_CONFIG=$OPTARG
        fi
        fi
+       shift 1
 done
 
 done
 
+source_all() {
+       # Source file even if it's in $PWD and does not have any slashes in it
+       case "$1" in
+               */*) . "$1";;
+               *)   . "$PWD/$1";;
+       esac;
+}
+
+
+# Read configuration and set defaults if anything's not set
+[ -n "$VCSH_DEBUG" ]                  && set -vx
+: ${XDG_CONFIG_HOME:=$HOME/.config}
+
+# Read configuration files if there are any
+[ -r "/etc/vcsh/config" ]             && . "/etc/vcsh/config"
+[ -r "$XDG_CONFIG_HOME/vcsh/config" ] && . "$XDG_CONFIG_HOME/vcsh/config"
+if [ -n "$VCSH_OPTION_CONFIG" ]; then
+       # Source $VCSH_OPTION_CONFIG if it can be read and is in $PWD of $PATH
+       if [ -r "$VCSH_OPTION_CONFIG" ]; then
+               source_all "$VCSH_OPTION_CONFIG"
+       else
+               fatal "Can not read configuration file '$VCSH_OPTION_CONFIG'" 1
+       fi
+fi
+[ -n "$VCSH_DEBUG" ]                  && set -vx
+
+# Read defaults
+: ${VCSH_REPO_D:=$XDG_CONFIG_HOME/vcsh/repo.d}
+: ${VCSH_HOOK_D:=$XDG_CONFIG_HOME/vcsh/hooks-enabled}
+: ${VCSH_BASE:=$HOME}
+: ${VCSH_GITIGNORE:=exact}
+: ${VCSH_WORKTREE:=absolute}
+
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+       fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ] && [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+       fatal "'\$VCSH_WORKTREE' must equal 'absolute', or 'relative'" 1
+fi
+
+
+help() {
+       echo "usage: $SELF <options> <command>
+
+   options:
+   -c <file>            Source file
+   -d                   Enable debug mode
+   -v                   Enable verbose mode
+
+   commands:
+   clone <remote> \\
+         [<repo>]       Clone from an existing repository
+   commit               Commit in all repositories
+   delete <repo>        Delete an existing repository
+   enter <repo>         Enter repository; spawn new instance of \$SHELL
+   help                 Display this help text
+   init <repo>          Initialize a new repository
+   list                 List all repositories
+   list-tracked         List all files tracked by vcsh
+   list-tracked-by \\
+        <repo>          List files tracked by a repository
+   pull                 Pull from all vcsh remotes
+   push                 Push to vcsh remotes
+   rename <repo> \\
+          <newname>     Rename repository
+   run <repo> \\
+       <command>        Use this repository
+   status [<repo>]      Show statuses of all/one vcsh repositories
+   upgrade <repo>       Upgrade repository to currently recommended settings
+   version              Print version information
+   which <substring>    Find substring in name of any tracked file
+   write-gitignore \\
+   <repo>               Write .gitignore.d/<repo> via git ls-files
+
+   <repo> <git command> Shortcut to run git commands directly
+   <repo>               Shortcut to enter repository" >&2
+}
 
 debug() {
 
 debug() {
-       [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $1"
+       [ -n "$VCSH_DEBUG" ] && echo "$SELF: debug: $@"
 }
 
 verbose() {
 }
 
 verbose() {
-       if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $1"; fi
+       if [ -n "$VCSH_DEBUG" ] || [ -n "$VCSH_VERBOSE" ]; then echo "$SELF: verbose: $@"; fi
 }
 
 }
 
-#   use <repo>     Use this repository
-#
-#   exit              Exit vcsh mode" >&2
-help() {
-       echo "usage: $SELF <args>
+error() {
+       echo "$SELF: error: $1" >&2
+}
 
 
-   help              Display this help
+info() {
+       echo "$SELF: info: $1"
+}
 
 
-   list              List all repos
+clone() {
+       hook pre-clone
+       init
+       git remote add origin "$GIT_REMOTE"
+       git config branch.master.remote origin
+       git config branch.master.merge  refs/heads/master
+       if [ $(git ls-remote origin master 2> /dev/null | wc -l ) -lt 1 ]; then
+               info "remote is empty, not merging anything"
+               exit
+       fi
+       git fetch
+       hook pre-merge
+       git ls-tree -r --name-only origin/master | (while read object; do
+               [ -e "$object" ] &&
+                       error "'$object' exists." &&
+                       VCSH_CONFLICT=1
+       done
+       [ "$VCSH_CONFLICT" = '1' ]) &&
+               fatal "will stop after fetching and not try to merge!
+  Once this situation has been resolved, run 'vcsh run $VCSH_REPO_NAME git pull' to finish cloning." 17
+       git merge origin/master
+       hook post-merge
+       hook post-clone
+       retire
+       hook post-clone-retired
+}
 
 
-   run <repo> \\
-       <command>     Use this repository
+commit() {
+       hook pre-commit
+       for VCSH_REPO_NAME in $(list); do
+               echo "$VCSH_REPO_NAME: "
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git commit --untracked-files=no --quiet
+               VCSH_COMMAND_RETURN_CODE=$?
+               echo
+       done
+       hook post-commit
+}
 
 
-   init <repo>       Initialize a new repository
-   clone <remote> \\
-         [<repo>]    Clone from an existing repository" >&2
+delete() {
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       use
+       info "This operation WILL DESTROY DATA!"
+       files=$(git ls-files)
+       echo "These files will be deleted:
+
+$files
+
+AGAIN, THIS WILL DELETE YOUR DATA!
+To continue, type 'Yes, do as I say'"
+       read answer
+       [ "x$answer" = 'xYes, do as I say' ] || exit 16
+       for file in $files; do
+               rm -f $file || info "could not delete '$file', continuing with deletion"
+       done
+       rm -rf "$GIT_DIR" || error "could not delete '$GIT_DIR'"
 }
 
 }
 
-use() {
-       verbose "use() begin"
-       REPO_NAME="$1"
-       GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
+enter() {
+       hook pre-enter
+       use
+       $SHELL
+       hook post-enter
+}
 
 
-       if [ ! -d "$GIT_DIR" ]; then
-               echo E: no repository found for "$REPO_NAME" >&2
-               return 2
-       fi
+git_dir_exists() {
+       [ -d "$GIT_DIR" ] || fatal "no repository found for '$VCSH_REPO_NAME'" 12
+}
 
 
-       export GIT_DIR
-       export GIT_WORK_TREE="$(git config --get core.worktree)"
-       export VCSH_DIRECTORY="$REPO_NAME"
-       verbose "use() end"
+hook() {
+       for hook in $VCSH_HOOK_D/$1* $VCSH_HOOK_D/$VCSH_REPO_NAME.$1*; do
+               [ -x "$hook" ] || continue
+               verbose "executing '$hook'"
+               "$hook"
+       done
 }
 
 init() {
 }
 
 init() {
-       verbose "init() begin"
-       [ -e "$GIT_DIR" ] &&
-               echo "$SELF: fatal: $GIT_DIR exists" &&
-               return 21
-       export GIT_WORK_TREE="$HOME"
-       mkdir -p "$GIT_WORK_TREE"
-       cd "$GIT_WORK_TREE" ||
-               (echo "$SELF: fatal: could not enter $GIT_WORK_TREE" &&
-                exit 20) || exit 20
-       cd "$GIT_WORK_TREE"
-       git init
-       git config core.worktree "$GIT_WORK_TREE"
-       verbose "init() end"
-}
-
-leave() {
-       unset GIT_DIR
-       unset GIT_WORK_TREE
-       unset VCSH_DIRECTORY
+       hook pre-init
+       [ ! -e "$GIT_DIR" ] || fatal "'$GIT_DIR' exists" 10
+       mkdir -p "$VCSH_BASE" || fatal "could not create '$VCSH_BASE'" 50
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       git init --shared=0600
+       upgrade
+       hook post-init
 }
 
 }
 
-if [ "$1" = 'help' ] || [ "$#" -eq 0 ]; then
-       help
-       [ "$1" = 'help' ]
-       exit $?
+list() {
+       for repo in "$VCSH_REPO_D"/*.git; do
+               [ -d "$repo" ] && [ -r "$repo" ] && echo $(basename "$repo" .git)
+       done
+}
+
+get_files() {
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       git ls-files
+}
 
 
-elif [ "$1" = 'list' ]; then
-       verbose "list begin"
-       for i in "$VCSH_BASE"/*.git; do
-               echo $(basename "$i" .git)
+list_tracked() {
+       for VCSH_REPO_NAME in $(list); do
+               get_files
+       done | sort -u
+}
+
+list_tracked_by() {
+       use
+       git ls-files | sort -u
+}
+
+pull() {
+       hook pre-pull
+       for VCSH_REPO_NAME in $(list); do
+               printf "$VCSH_REPO_NAME: "
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git pull
+               VCSH_COMMAND_RETURN_CODE=$?
+               echo
        done
        done
-       verbose "list end"
-       exit 0
+       hook post-pull
+}
+
+push() {
+       hook pre-push
+       for VCSH_REPO_NAME in $(list); do
+               printf "$VCSH_REPO_NAME: "
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git push
+               VCSH_COMMAND_RETURN_CODE=$?
+               echo
+       done
+       hook post-push
+}
 
 
-elif [ "$1" = 'run' ]; then
-       verbose "run begin"
-       use "$2"
-       shift 2
+retire() {
+       unset VCSH_DIRECTORY
+}
+
+rename() {
+       git_dir_exists
+       [ -d "$GIT_DIR_NEW" ] && fatal "'$GIT_DIR_NEW' exists" 54
+       mv -f "$GIT_DIR" "$GIT_DIR_NEW" || fatal "Could not mv '$GIT_DIR' '$GIT_DIR_NEW'" 52
+
+       # Now that the repository has been renamed, we need to fix up its configuration
+       # Overwrite old name..
+       GIT_DIR="$GIT_DIR_NEW"
+       VCSH_REPO_NAME="$VCSH_REPO_NAME_NEW"
+       # ..and clobber all old configuration
+       upgrade
+}
+
+run() {
+       hook pre-run
+       use
        "$@"
        "$@"
-       leave
-       verbose "run end"
-       exit 0
-
-#elif [ "$1" = 'use' ]; then
-#      verbose "use begin"
-#      if [ -n "$ZSH_VERSION" ]; then
-#              if [ -o NO_IGNORE_EOF ]; then
-#                      export VCSH_NO_IGNORE_EOF=1
-#                      setopt IGNORE_EOF
-#              fi
-#              vcsh_exit() {
-#                      vcsh exit;
-#                      zle reset-prompt;
-#              }
-#              zle -N vcsh_exit
-#              bindkey '^d' 'vcsh_exit'
-#      fi
-#      use $2
-#      [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
-#      verbose "use end"
-#      exit 0
-
-elif [ "$1" = 'clone' ]; then
-       verbose "clone begin"
-       GIT_REMOTE="$2"
-       REPO_NAME="$3"
-       [ -z "$REPO_NAME" ] && REPO_NAME=$(basename "$GIT_REMOTE" .git)
-       export REPO_NAME
-       export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
-       init
+       VCSH_COMMAND_RETURN_CODE=$?
+       hook post-run
+}
 
 
-       git remote add origin "$GIT_REMOTE"
-       git config branch.master.remote origin
-       git config branch.master.merge  refs/heads/master
-       git fetch
-       for object in $(git ls-tree -r origin/master | awk '{print $4}'); do
-               [ -e "$object" ] &&
-                       echo "$SELF: error: $object exists." &&
-                       VCSH_CONFLICT=1;
+status() {
+       if [ ! "x$VCSH_REPO_NAME" = "x" ]; then
+               export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+               use
+               git status --short --untracked-files='no'
+               VCSH_COMMAND_RETURN_CODE=$?
+       else
+               for VCSH_REPO_NAME in $(list); do
+                       echo "$VCSH_REPO_NAME:"
+                       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+                       use
+                       git status --short --untracked-files='no'
+                       VCSH_COMMAND_RETURN_CODE=$?
+                       echo
+               done
+       fi
+}
+
+upgrade() {
+       hook pre-upgrade
+       # fake-bare repositories are not bare, actually. Set this to false
+       # because otherwise Git complains "fatal: core.bare and core.worktree
+       # do not make sense"
+       git config core.bare false
+       # core.worktree may be absolute or relative to $GIT_DIR, depending on
+       # user preference
+       if [ ! "x$VCSH_WORKTREE" = 'xabsolute' ]; then
+               git config core.worktree $(cd $GIT_DIR && GIT_WORK_TREE="$VCSH_BASE" git rev-parse --show-cdup)
+       elif [ ! "x$VCSH_WORKTREE" = 'xrelative' ]; then
+               git config core.worktree "$VCSH_BASE"
+       fi
+       [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && git config core.excludesfile ".gitignore.d/$VCSH_REPO_NAME"
+       git config core.attributesfile ".gitattributes.d/$VCSH_REPO_NAME"
+       git config vcsh.vcsh 'true'
+       use
+       [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME"
+       [ -e "$VCSH_BASE/.gitattributes.d/$VCSH_REPO_NAME" ] && git add -f "$VCSH_BASE/.gitattributes.d/$VCSH_REPO_NAME"
+       hook post-upgrade
+}
+
+use() {
+       git_dir_exists
+       export VCSH_DIRECTORY="$VCSH_REPO_NAME"
+}
+
+which() {
+       for VCSH_REPO_NAME in $(list); do
+               for VCSH_FILE in $(get_files); do
+                       echo $VCSH_FILE | grep -q "$VCSH_COMMAND_PARAMETER" && echo "$VCSH_REPO_NAME: $VCSH_FILE"
+               done
+       done | sort -u
+}
+
+write_gitignore() {
+       # Don't do anything if the user does not want to write gitignore
+       if [ "x$VCSH_GITIGNORE" = 'xnone' ]; then
+               info "Not writing gitignore as '\$VCSH_GITIGNORE' is set to 'none'"
+               exit
+       fi
+
+       use
+       cd "$VCSH_BASE" || fatal "could not enter '$VCSH_BASE'" 11
+       OLDIFS="$IFS"
+       IFS=$(printf '\n\t')
+       gitignores=$(for file in $(git ls-files); do
+               while true; do
+                       echo $file; new="${file%/*}"
+                       [ "$file" = "$new" ] && break
+                       file="$new"
+               done;
+       done | sort -u)
+
+       # Contrary to GNU mktemp, mktemp on BSD/OSX requires a template for temp files
+       # Using a template makes GNU mktemp default to $PWD and not #TMPDIR for tempfile location
+       # To make every OS happy, set full path explicitly
+       tempfile=$(mktemp "${TMPDIR:-/tmp}/tmp.XXXXXXXXXX") || fatal "could not create tempfile: '${tempfile}'" 51
+
+       echo '*' > "$tempfile" || fatal "could not write to '$tempfile'" 57
+       for gitignore in $gitignores; do
+               echo "$gitignore" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57
+               if [ "x$VCSH_GITIGNORE" = 'xrecursive' ] && [ -d "$gitignore" ]; then
+                       { echo "$gitignore/*" | sed 's@^@!/@' >> "$tempfile" || fatal "could not write to '$tempfile'" 57; }
+               fi
        done
        done
-       [ "$VCSH_CONFLICT" = '1' ] &&
-               echo "$SELF: fatal: will stop after fetching and not try to merge!\n" &&
-               echo "  Once this situation has been resolved, run 'vcsh run <foo> git pull' to finish cloning.\n" &&
-               exit 3
-       git merge origin/master
-#      vcsh use $REPO_NAME
-       verbose "clone end"
-
-elif [ "$1" = 'init' ]; then
-       verbose "init begin"
-       [ -z $2 ] && help && return 0
-       export REPO_NAME="$2"
-       export GIT_DIR="$VCSH_BASE/$REPO_NAME.git"
-       init
-#      vcsh use "$REPO_NAME"
-       verbose "init end"
-
-#elif [ "$1" = 'exit' ]; then
-#      verbose "exit begin"
-#      if [ -n "$ZSH_VERSION" ] && [ "$VCSH_NO_IGNORE_EOF" = '1' ]; then
-#              unset VCSH_NO_IGNORE_EOF
-#              setopt NO_IGNORE_EOF
-#      fi
-#      leave
-#      [ -n "$ZSH_VERSION" ] && [ "$USER" = richih ] && buildPS1
-#      verbose "exit end"
-#      exit 0
+       IFS="$OLDIFS"
+       if diff -N "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" > /dev/null; then
+               rm -f "$tempfile" || error "could not delete '$tempfile'"
+               exit
+       fi
+       if [ -e "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ]; then
+               info "'$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME' differs from new data, moving it to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak'"
+               mv -f "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak" ||
+                       fatal "could not move '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME.bak'" 53
+       fi
+       mv -f "$tempfile" "$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME" ||
+               fatal "could not move '$tempfile' to '$VCSH_BASE/.gitignore.d/$VCSH_REPO_NAME'" 53
+}
+
+debug `git version`
 
 
+if [ ! "x$VCSH_GITIGNORE" = 'xexact' ] && [ ! "x$VCSH_GITIGNORE" = 'xnone' ] && [ ! "x$VCSH_GITIGNORE" = 'xrecursive' ]; then
+       fatal "'\$VCSH_GITIGNORE' must equal 'exact', 'none', or 'recursive'" 1
+fi
+
+export VCSH_COMMAND="$1"
+
+case "$VCSH_COMMAND" in
+       clon|clo|cl) VCSH_COMMAND=clone;;
+       commi|comm|com|co) VCSH_COMMAND=commit;;
+       delet|dele|del|de) VCSH_COMMAND=delete;;
+       ente|ent|en) VCSH_COMMAND=enter;;
+       hel|he) VCSH_COMMAND=help;;
+       ini|in) VCSH_COMMAND=init;;
+       pul) VCSH_COMMAND=pull;;
+       pus) VCSH_COMMAND=push;;
+       renam|rena|ren|re) VCSH_COMMAND=rename;;
+       ru) VCSH_COMMAND=run;;
+       statu|stat|sta|st) VCSH_COMMAND=status;;
+       upgrad|upgra|upgr|up) VCSH_COMMAND=upgrade;;
+       versio|versi|vers|ver|ve) VCSH_COMMAND=version;;
+       which|whi|wh) VCSH_COMMAND=which;;
+       write|writ|wri|wr) VCSH_COMMAND=write-gitignore;;
+esac    
+
+if [ "$VCSH_COMMAND" = 'clone' ]; then
+       [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a remote" 1
+       GIT_REMOTE="$2"
+       [ -n "$3" ] && VCSH_REPO_NAME="$3" || VCSH_REPO_NAME=$(basename "${GIT_REMOTE#*:}" .git)
+       [ -z "$VCSH_REPO_NAME" ] && fatal "$VCSH_COMMAND: could not determine repository name" 1
+       export VCSH_REPO_NAME
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+elif [ "$VCSH_COMMAND" = 'version' ]; then
+       echo "$SELF $VERSION"
+       git version
+       exit
+elif [ "$VCSH_COMMAND" = 'which' ]; then
+       [ -z "$2" ] && fatal "$VCSH_COMMAND: please specify a filename" 1
+       [ -n "$3" ] && fatal "$VCSH_COMMAND: too many parameters" 1
+       export VCSH_COMMAND_PARAMETER="$2"
+elif [ "$VCSH_COMMAND" = 'delete' ]           ||
+     [ "$VCSH_COMMAND" = 'enter' ]            ||
+     [ "$VCSH_COMMAND" = 'init' ]             ||
+     [ "$VCSH_COMMAND" = 'list-tracked-by' ]  ||
+     [ "$VCSH_COMMAND" = 'rename' ]           ||
+     [ "$VCSH_COMMAND" = 'run' ]              ||
+     [ "$VCSH_COMMAND" = 'upgrade' ]          ||
+     [ "$VCSH_COMMAND" = 'write-gitignore' ]; then
+       [ -z $2 ]                                 && fatal "$VCSH_COMMAND: please specify repository to work on" 1
+       [ "$VCSH_COMMAND" = 'rename' -a -z "$3" ] && fatal "$VCSH_COMMAND: please specify a target name" 1
+       [ "$VCSH_COMMAND" = 'run'    -a -z "$3" ] && fatal "$VCSH_COMMAND: please specify a command" 1
+       export VCSH_REPO_NAME="$2"
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       [ "$VCSH_COMMAND" = 'rename' ] && { export VCSH_REPO_NAME_NEW="$3";
+                                           export GIT_DIR_NEW="$VCSH_REPO_D/$VCSH_REPO_NAME_NEW.git"; }
+       [ "$VCSH_COMMAND" = 'run' ]    && shift 2
+elif [ "$VCSH_COMMAND" = 'commit' ] ||
+     [ "$VCSH_COMMAND" = 'list' ] ||
+     [ "$VCSH_COMMAND" = 'list-tracked' ] ||
+     [ "$VCSH_COMMAND" = 'pull' ] ||
+     [ "$VCSH_COMMAND" = 'push' ]; then
+       :
+elif [ "$VCSH_COMMAND" = 'status' ]; then
+       export VCSH_REPO_NAME="$2"
+elif [ -n "$2" ]; then
+       export VCSH_COMMAND='run'
+       export VCSH_REPO_NAME="$1"
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       [ -d $GIT_DIR ] || { help; exit 1; }
+       shift 1
+       set -- "git" "$@"
+elif [ -n "$VCSH_COMMAND" ]; then
+       export VCSH_COMMAND='enter'
+       export VCSH_REPO_NAME="$1"
+       export GIT_DIR="$VCSH_REPO_D/$VCSH_REPO_NAME.git"
+       [ -d $GIT_DIR ] || { help; exit 1; }
 else
 else
-       verbose "defaulting to calling help()"
-       help
-       exit 3
+       # $1 is empty, or 'help'
+       help && exit
+fi
 
 
+# Did we receive a directory instead of a name?
+# Mangle the input to fit normal operation.
+if echo $VCSH_REPO_NAME | grep -q '/'; then
+       export GIT_DIR=$VCSH_REPO_NAME
+       export VCSH_REPO_NAME=$(basename "$VCSH_REPO_NAME" .git)
 fi
 
 fi
 
+check_dir() {
+       check_directory="$1"
+       if [ ! -d "$check_directory" ]; then
+               if [ -e "$check_directory" ]; then
+                       fatal "'$check_directory' exists but is not a directory" 13
+               else
+                       verbose "attempting to create '$check_directory'"
+                       mkdir -p "$check_directory" || fatal "could not create '$check_directory'" 50
+               fi
+       fi
+}
+
+check_dir "$VCSH_REPO_D"
+[ ! "x$VCSH_GITIGNORE" = 'xnone' ] && check_dir "$VCSH_BASE/.gitignore.d"
+check_dir "$VCSH_BASE/.gitattributes.d"
+
+verbose "$VCSH_COMMAND begin"
+export VCSH_COMMAND=$(echo $VCSH_COMMAND | sed 's/-/_/g')
+hook pre-command
+$VCSH_COMMAND "$@"
+hook post-command
+verbose "$VCSH_COMMAND end, exiting"
+exit $VCSH_COMMAND_RETURN_CODE