--- /dev/null
+# Auto-generated using mkconf from manual.txt
+# on 2019-01-18 23:23:40
+#
+# Invoked as: ./mkconf confvars
+#
+
+# 3.1. abort_noattach
+#
+# Type: quadoption
+# Default: no
+#
+# When the body of the message matches $abort_noattach_regexp and there are no
+# attachments, this quadoption controls whether to abort sending the message.
+#
+set abort_noattach=ask-yes
+
+
+# 3.2. abort_noattach_regexp
+#
+# Type: regular expression
+# Default: “attach”
+#
+# Specifies a regular expression to match against the body of the message, to
+# determine if an attachment was mentioned but mistakenly forgotten. If it
+# matches, $abort_noattach will be consulted to determine if message sending will
+# be aborted.
+#
+# Like other regular expressions in Mutt, the search is case sensitive if the
+# pattern contains at least one upper case letter, and case insensitive
+# otherwise.
+#
+set abort_noattach_regexp='attach|beigefügt|angehängt|an(hang|lage)'
+#'attach(ing|ed|ment)?|included\W+(with|in)\W+th(is|e\W+(curr|pres)ent)\W+mail|an(geh(ä|=E4|=C3=A4)ngt|h(ä|=E4|=C3=A4)ngsel|bei)|bei(gef(ü|=FC|=C3=BC)gt|lage)|(im|siehe)\W+(anhang|beilage)|attach(e|er|(é|=E9|=C3=A9)e?s?|ement|ant)'
+
+
+# 3.3. abort_nosubject
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# If set to yes, when composing messages and no subject is given at the subject
+# prompt, composition will be aborted. If set to no, composing messages with no
+# subject given at the subject prompt will never be aborted.
+#
+
+
+# 3.4. abort_unmodified
+#
+# Type: quadoption
+# Default: yes
+#
+# If set to yes, composition will automatically abort after editing the message
+# body if no changes are made to the file (this check only happens after the
+# first edit of the file). When set to no, composition will never be aborted.
+#
+
+
+# 3.5. alias_file
+#
+# Type: path
+# Default: “~/.muttrc”
+#
+# The default file in which to save aliases created by the <create-alias>
+# function. Entries added to this file are encoded in the character set specified
+# by $config_charset if it is set or the current character set otherwise.
+#
+# Note: Mutt will not automatically source this file; you must explicitly use the
+# “source” command for it to be executed in case this option points to a
+# dedicated alias file.
+#
+# The default for this option is the currently used muttrc file, or “~/.muttrc”
+# if no user muttrc was found.
+#
+set alias_file="$my_confdir/aliases"
+
+
+# 3.6. alias_format
+#
+# Type: string
+# Default: “%4n %2f %t %-10a %r”
+#
+# Specifies the format of the data displayed for the “alias” menu. The following
+# printf(3)-style sequences are available:
+#
+# ┌──┬──────────────────────────────────────────────────────────────┐
+# │%a│alias name │
+# ├──┼──────────────────────────────────────────────────────────────┤
+# │%f│flags - currently, a “d” for an alias marked for deletion │
+# ├──┼──────────────────────────────────────────────────────────────┤
+# │%n│index number │
+# ├──┼──────────────────────────────────────────────────────────────┤
+# │%r│address which alias expands to │
+# ├──┼──────────────────────────────────────────────────────────────┤
+# │%t│character which indicates if the alias is tagged for inclusion│
+# └──┴──────────────────────────────────────────────────────────────┘
+#
+
+
+# 3.7. allow_8bit
+#
+# Type: boolean
+# Default: yes
+#
+# Controls whether 8-bit data is converted to 7-bit using either Quoted-
+# Printable or Base64 encoding when sending mail.
+#
+
+
+# 3.8. allow_ansi
+#
+# Type: boolean
+# Default: no
+#
+# Controls whether ANSI color codes in messages (and color tags in rich text
+# messages) are to be interpreted. Messages containing these codes are rare, but
+# if this option is set, their text will be colored accordingly. Note that this
+# may override your color choices, and even present a security problem, since a
+# message could include a line like
+#
+# [-- PGP output follows ...
+#
+# and give it the same color as your attachment color (see also $crypt_timestamp
+# ).
+#
+
+
+# 3.9. arrow_cursor
+#
+# Type: boolean
+# Default: no
+#
+# When set, an arrow (“->”) will be used to indicate the current entry in menus
+# instead of highlighting the whole line. On slow network or modem links this
+# will make response faster because there is less that has to be redrawn on the
+# screen when moving to the next or previous entries in the menu.
+#
+
+
+# 3.10. ascii_chars
+#
+# Type: boolean
+# Default: no
+#
+# If set, Mutt will use plain ASCII characters when displaying thread and
+# attachment trees, instead of the default ACS characters.
+#
+
+
+# 3.11. askbcc
+#
+# Type: boolean
+# Default: no
+#
+# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients before
+# editing an outgoing message.
+#
+
+
+# 3.12. askcc
+#
+# Type: boolean
+# Default: no
+#
+# If set, Mutt will prompt you for carbon-copy (Cc) recipients before editing the
+# body of an outgoing message.
+#
+
+
+# 3.13. assumed_charset
+#
+# Type: string
+# Default: (empty)
+#
+# This variable is a colon-separated list of character encoding schemes for
+# messages without character encoding indication. Header field values and message
+# body content without character encoding indication would be assumed that they
+# are written in one of this list. By default, all the header fields and message
+# body without any charset indication are assumed to be in “us-ascii”.
+#
+# For example, Japanese users might prefer this:
+#
+# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
+#
+# However, only the first content is valid for the message body.
+#
+
+
+# 3.14. attach_charset
+#
+# Type: string
+# Default: (empty)
+#
+# This variable is a colon-separated list of character encoding schemes for text
+# file attachments. Mutt uses this setting to guess which encoding files being
+# attached are encoded in to convert them to a proper character set given in
+# $send_charset.
+#
+# If unset, the value of $charset will be used instead. For example, the
+# following configuration would work for Japanese text handling:
+#
+# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
+#
+# Note: for Japanese users, “iso-2022-*” must be put at the head of the value as
+# shown above if included.
+#
+
+
+# 3.15. attach_format
+#
+# Type: string
+# Default: “%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] ”
+#
+# This variable describes the format of the “attachment” menu. The following
+# printf(3)-style sequences are understood:
+#
+# ┌───┬─────────────────────────────────────────────────────────────────────────┐
+# │%C │charset │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%c │requires charset conversion (“n” or “c”) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%D │deleted flag │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%d │description (if none, falls back to %F) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%e │MIME content-transfer-encoding │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%F │filename in content-disposition header (if none, falls back to %f) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%f │filename │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%I │disposition (“I” for inline, “A” for attachment) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%m │major MIME type │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%M │MIME subtype │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%n │attachment number │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%Q │“Q”, if MIME part qualifies for attachment counting │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%s │size │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%t │tagged flag │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%T │graphic tree characters │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%u │unlink (=to delete) flag │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%X │number of qualifying MIME parts in this part and its children (please see│
+# │ │the “attachments” section for possible speed effects) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%>X│right justify the rest of the string and pad with character “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%|X│pad to the end of the line with character “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%*X│soft-fill with character “X” as pad │
+# └───┴─────────────────────────────────────────────────────────────────────────┘
+#
+# For an explanation of “soft-fill”, see the $index_format documentation.
+#
+
+
+# 3.16. attach_sep
+#
+# Type: string
+# Default: “n”
+#
+# The separator to add between attachments when operating (saving, printing,
+# piping, etc) on a list of tagged attachments.
+#
+
+
+# 3.17. attach_split
+#
+# Type: boolean
+# Default: yes
+#
+# If this variable is unset, when operating (saving, printing, piping, etc) on a
+# list of tagged attachments, Mutt will concatenate the attachments and will
+# operate on them as a single attachment. The $attach_sep separator is added
+# after each attachment. When set, Mutt will operate on the attachments one by
+# one.
+#
+
+
+# 3.18. attribution
+#
+# Type: string
+# Default: “On %d, %n wrote:”
+#
+# This is the string that will precede a message which has been included in a
+# reply. For a full listing of defined printf(3)-like sequences see the section
+# on $index_format.
+#
+set attribution="also sprach %n <%a> [%[%Y-%m-%d %H:%M %z]]:"
+
+
+# 3.19. attribution_locale
+#
+# Type: string
+# Default: (empty)
+#
+# The locale used by strftime(3) to format dates in the attribution string. Legal
+# values are the strings your system accepts for the locale environment variable
+# $LC_TIME.
+#
+# This variable is to allow the attribution date format to be customized by
+# recipient or folder using hooks. By default, Mutt will use your locale
+# environment, so there is no need to set this except to override that default.
+#
+
+
+# 3.20. auto_tag
+#
+# Type: boolean
+# Default: no
+#
+# When set, functions in the index menu which affect a message will be applied to
+# all tagged messages (if there are any). When unset, you must first use the
+# <tag-prefix> function (bound to “;” by default) to make the next function apply
+# to all tagged messages.
+#
+
+
+# 3.21. autoedit
+#
+# Type: boolean
+# Default: no
+#
+# When set along with $edit_headers, Mutt will skip the initial send-menu
+# (prompting for subject and recipients) and allow you to immediately begin
+# editing the body of your message. The send-menu may still be accessed once you
+# have finished editing the body of your message.
+#
+# Note: when this option is set, you cannot use send-hooks that depend on the
+# recipients when composing a new (non-reply) message, as the initial list of
+# recipients is empty.
+#
+# Also see $fast_reply.
+#
+
+
+# 3.22. beep
+#
+# Type: boolean
+# Default: yes
+#
+# When this variable is set, mutt will beep when an error occurs.
+#
+set beep=no
+
+
+# 3.23. beep_new
+#
+# Type: boolean
+# Default: no
+#
+# When this variable is set, mutt will beep whenever it prints a message
+# notifying you of new mail. This is independent of the setting of the $beep
+# variable.
+#
+
+
+# 3.24. bounce
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# Controls whether you will be asked to confirm bouncing messages. If set to yes
+# you don't get asked if you want to bounce a message. Setting this variable to
+# no is not generally useful, and thus not recommended, because you are unable to
+# bounce messages.
+#
+
+
+# 3.25. bounce_delivered
+#
+# Type: boolean
+# Default: yes
+#
+# When this variable is set, mutt will include Delivered-To headers when bouncing
+# messages. Postfix users may wish to unset this variable.
+#
+set bounce_delivered=no
+
+
+# 3.26. braille_friendly
+#
+# Type: boolean
+# Default: no
+#
+# When this variable is set, mutt will place the cursor at the beginning of the
+# current line in menus, even when the $arrow_cursor variable is unset, making it
+# easier for blind persons using Braille displays to follow these menus. The
+# option is unset by default because many visual terminals don't permit making
+# the cursor invisible.
+#
+
+
+# 3.27. browser_abbreviate_mailboxes
+#
+# Type: boolean
+# Default: yes
+#
+# When this variable is set, mutt will abbreviate mailbox names in the browser
+# mailbox list, using '~' and '=' shortcuts.
+#
+# The default "alpha" setting of $sort_browser uses locale-based sorting (using
+# strcoll(3)), which ignores some punctuation. This can lead to some situations
+# where the order doesn't make intuitive sense. In those cases, it may be
+# desirable to unset this variable.
+#
+
+
+# 3.28. certificate_file
+#
+# Type: path
+# Default: “~/.mutt_certificates”
+#
+# This variable specifies the file where the certificates you trust are saved.
+# When an unknown certificate is encountered, you are asked if you accept it or
+# not. If you accept it, the certificate can also be saved in this file and
+# further connections are automatically accepted.
+#
+# You can also manually add CA certificates in this file. Any server certificate
+# that is signed with one of these CA certificates is also automatically
+# accepted.
+#
+# Example:
+#
+# set certificate_file=~/.mutt/certificates
+#
+
+
+# 3.29. change_folder_next
+#
+# Type: boolean
+# Default: no
+#
+# When this variable is set, the <change-folder> function mailbox suggestion will
+# start at the next folder in your “mailboxes” list, instead of starting at the
+# first folder in the list.
+#
+
+
+# 3.30. charset
+#
+# Type: string
+# Default: (empty)
+#
+# Character set your terminal uses to display and enter textual data. It is also
+# the fallback for $send_charset.
+#
+# Upon startup Mutt tries to derive this value from environment variables such as
+# $LC_CTYPE or $LANG.
+#
+# Note: It should only be set in case Mutt isn't able to determine the character
+# set used correctly.
+#
+
+
+# 3.31. check_mbox_size
+#
+# Type: boolean
+# Default: no
+#
+# When this variable is set, mutt will use file size attribute instead of access
+# time when checking for new mail in mbox and mmdf folders.
+#
+# This variable is unset by default and should only be enabled when new mail
+# detection for these folder types is unreliable or doesn't work.
+#
+# Note that enabling this variable should happen before any “mailboxes”
+# directives occur in configuration files regarding mbox or mmdf folders because
+# mutt needs to determine the initial new mail status of such a mailbox by
+# performing a fast mailbox scan when it is defined. Afterwards the new mail
+# status is tracked by file size changes.
+#
+
+
+# 3.32. check_new
+#
+# Type: boolean
+# Default: yes
+#
+# Note: this option only affects maildir and MH style mailboxes.
+#
+# When set, Mutt will check for new mail delivered while the mailbox is open.
+# Especially with MH mailboxes, this operation can take quite some time since it
+# involves scanning the directory and checking each file to see if it has already
+# been looked at. If this variable is unset, no check for new mail is performed
+# while the mailbox is open.
+#
+
+
+# 3.33. collapse_unread
+#
+# Type: boolean
+# Default: yes
+#
+# When unset, Mutt will not collapse a thread if it contains any unread messages.
+#
+
+
+# 3.34. compose_format
+#
+# Type: string
+# Default: “-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-”
+#
+# Controls the format of the status line displayed in the “compose” menu. This
+# string is similar to $status_format, but has its own set of printf(3)-like
+# sequences:
+#
+# ┌──┬──────────────────────────────────────────────────┐
+# │%a│total number of attachments │
+# ├──┼──────────────────────────────────────────────────┤
+# │%h│local hostname │
+# ├──┼──────────────────────────────────────────────────┤
+# │%l│approximate size (in bytes) of the current message│
+# ├──┼──────────────────────────────────────────────────┤
+# │%v│Mutt version string │
+# └──┴──────────────────────────────────────────────────┘
+#
+# See the text describing the $status_format option for more information on how
+# to set $compose_format.
+#
+
+
+# 3.35. config_charset
+#
+# Type: string
+# Default: (empty)
+#
+# When defined, Mutt will recode commands in rc files from this encoding to the
+# current character set as specified by $charset and aliases written to
+# $alias_file from the current character set.
+#
+# Please note that if setting $charset it must be done before setting
+# $config_charset.
+#
+# Recoding should be avoided as it may render unconvertable characters as
+# question marks which can lead to undesired side effects (for example in regular
+# expressions).
+#
+
+
+# 3.36. confirmappend
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will prompt for confirmation when appending messages to an
+# existing mailbox.
+#
+set confirmappend=no
+
+
+# 3.37. confirmcreate
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will prompt for confirmation when saving messages to a mailbox
+# which does not yet exist before creating it.
+#
+
+
+# 3.38. connect_timeout
+#
+# Type: number
+# Default: 30
+#
+# Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this
+# many seconds if the connection is not able to be established. A negative value
+# causes Mutt to wait indefinitely for the connection attempt to succeed.
+#
+
+
+# 3.39. content_type
+#
+# Type: string
+# Default: “text/plain”
+#
+# Sets the default Content-Type for the body of newly composed messages.
+#
+
+
+# 3.40. copy
+#
+# Type: quadoption
+# Default: yes
+#
+# This variable controls whether or not copies of your outgoing messages will be
+# saved for later references. Also see $record, $save_name, $force_name and “
+# fcc-hook”.
+#
+set copy=yes
+
+
+# 3.41. crypt_autoencrypt
+#
+# Type: boolean
+# Default: no
+#
+# Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing
+# messages. This is probably only useful in connection to the “send-hook”
+# command. It can be overridden by use of the pgp menu, when encryption is not
+# required or signing is requested as well. If $smime_is_default is set, then
+# OpenSSL is used instead to create S/MIME messages and settings can be
+# overridden by use of the smime menu instead. (Crypto only)
+#
+
+
+# 3.42. crypt_autopgp
+#
+# Type: boolean
+# Default: yes
+#
+# This variable controls whether or not mutt may automatically enable PGP
+# encryption/signing for messages. See also $crypt_autoencrypt,
+# $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.
+#
+
+
+# 3.43. crypt_autosign
+#
+# Type: boolean
+# Default: no
+#
+# Setting this variable will cause Mutt to always attempt to cryptographically
+# sign outgoing messages. This can be overridden by use of the pgp menu, when
+# signing is not required or encryption is requested as well. If
+# $smime_is_default is set, then OpenSSL is used instead to create S/MIME
+# messages and settings can be overridden by use of the smime menu instead of the
+# pgp menu. (Crypto only)
+#
+set crypt_autosign=yes
+
+
+# 3.44. crypt_autosmime
+#
+# Type: boolean
+# Default: yes
+#
+# This variable controls whether or not mutt may automatically enable S/MIME
+# encryption/signing for messages. See also $crypt_autoencrypt,
+# $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.
+#
+
+
+# 3.45. crypt_confirmhook
+#
+# Type: boolean
+# Default: yes
+#
+# If set, then you will be prompted for confirmation of keys when using the
+# crypt-hook command. If unset, no such confirmation prompt will be presented.
+# This is generally considered unsafe, especially where typos are concerned.
+#
+
+
+# 3.46. crypt_opportunistic_encrypt
+#
+# Type: boolean
+# Default: no
+#
+# Setting this variable will cause Mutt to automatically enable and disable
+# encryption, based on whether all message recipient keys can be located by Mutt.
+#
+# When this option is enabled, Mutt will enable/disable encryption each time the
+# TO, CC, and BCC lists are edited. If $edit_headers is set, Mutt will also do so
+# each time the message is edited.
+#
+# While this is set, encryption can't be manually enabled/disabled. The pgp or
+# smime menus provide a selection to temporarily disable this option for the
+# current message.
+#
+# If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for a message,
+# this option will be disabled for that message. It can be manually re-enabled in
+# the pgp or smime menus. (Crypto only)
+#
+set crypt_opportunistic_encrypt=yes
+
+
+# 3.47. crypt_replyencrypt
+#
+# Type: boolean
+# Default: yes
+#
+# If set, automatically PGP or OpenSSL encrypt replies to messages which are
+# encrypted. (Crypto only)
+#
+
+
+# 3.48. crypt_replysign
+#
+# Type: boolean
+# Default: no
+#
+# If set, automatically PGP or OpenSSL sign replies to messages which are signed.
+#
+# Note: this does not work on messages that are encrypted and signed! (Crypto
+# only)
+#
+set crypt_replysign=yes
+
+
+# 3.49. crypt_replysignencrypted
+#
+# Type: boolean
+# Default: no
+#
+# If set, automatically PGP or OpenSSL sign replies to messages which are
+# encrypted. This makes sense in combination with $crypt_replyencrypt, because it
+# allows you to sign all messages which are automatically encrypted. This works
+# around the problem noted in $crypt_replysign, that mutt is not able to find out
+# whether an encrypted message is also signed. (Crypto only)
+#
+set crypt_replysignencrypted=yes
+
+
+# 3.50. crypt_timestamp
+#
+# Type: boolean
+# Default: yes
+#
+# If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME
+# output, so spoofing such lines is more difficult. If you are using colors to
+# mark these lines, and rely on these, you may unset this setting. (Crypto only)
+#
+
+
+# 3.51. crypt_use_gpgme
+#
+# Type: boolean
+# Default: no
+#
+# This variable controls the use of the GPGME-enabled crypto backends. If it is
+# set and Mutt was built with gpgme support, the gpgme code for S/MIME and PGP
+# will be used instead of the classic code. Note that you need to set this option
+# in .muttrc; it won't have any effect when used interactively.
+#
+# Note that the GPGME backend does not support creating old-style inline
+# (traditional) PGP encrypted or signed messages (see $pgp_autoinline).
+#
+
+
+# 3.52. crypt_use_pka
+#
+# Type: boolean
+# Default: no
+#
+# Controls whether mutt uses PKA (see http://www.g10code.de/docs/
+# pka-intro.de.pdf) during signature verification (only supported by the GPGME
+# backend).
+#
+
+
+# 3.53. crypt_verify_sig
+#
+# Type: quadoption
+# Default: yes
+#
+# If “yes”, always attempt to verify PGP or S/MIME signatures. If “ask-*”, ask
+# whether or not to verify the signature. If “no”, never attempt to verify
+# cryptographic signatures. (Crypto only)
+#
+
+
+# 3.54. date_format
+#
+# Type: string
+# Default: “!%a, %b %d, %Y at %I:%M:%S%p %Z”
+#
+# This variable controls the format of the date printed by the “%d” sequence in
+# $index_format. This is passed to the strftime(3) function to process the date,
+# see the man page for the proper syntax.
+#
+# Unless the first character in the string is a bang (“!”), the month and week
+# day names are expanded according to the locale. If the first character in the
+# string is a bang, the bang is discarded, and the month and week day names in
+# the rest of the string are expanded in the C locale (that is in US English).
+#
+set date_format="%d %b %Y %T%Z"
+
+
+# 3.55. default_hook
+#
+# Type: string
+# Default: “~f %s !~P | (~P ~C %s)”
+#
+# This variable controls how “message-hook”, “reply-hook”, “send-hook”, “
+# send2-hook”, “save-hook”, and “fcc-hook” will be interpreted if they are
+# specified with only a simple regexp, instead of a matching pattern. The hooks
+# are expanded when they are declared, so a hook will be interpreted according to
+# the value of this variable at the time the hook is declared.
+#
+# The default value matches if the message is either from a user matching the
+# regular expression given, or if it is from you (if the from address matches “
+# alternates”) and is to or cc'ed to a user matching the given regular
+# expression.
+#
+
+
+# 3.56. delete
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# Controls whether or not messages are really deleted when closing or
+# synchronizing a mailbox. If set to yes, messages marked for deleting will
+# automatically be purged without prompting. If set to no, messages marked for
+# deletion will be kept in the mailbox.
+#
+set delete=yes
+
+
+# 3.57. delete_untag
+#
+# Type: boolean
+# Default: yes
+#
+# If this option is set, mutt will untag messages when marking them for deletion.
+# This applies when you either explicitly delete a message, or when you save it
+# to another folder.
+#
+
+
+# 3.58. digest_collapse
+#
+# Type: boolean
+# Default: yes
+#
+# If this option is set, mutt's received-attachments menu will not show the
+# subparts of individual messages in a multipart/digest. To see these subparts,
+# press “v” on that menu.
+#
+
+
+# 3.59. display_filter
+#
+# Type: path
+# Default: (empty)
+#
+# When set, specifies a command used to filter messages. When a message is viewed
+# it is passed as standard input to $display_filter, and the filtered message is
+# read from the standard output.
+#
+
+
+# 3.60. dotlock_program
+#
+# Type: path
+# Default: “/usr/bin/mutt_dotlock”
+#
+# Contains the path of the mutt_dotlock(8) binary to be used by mutt.
+#
+
+
+# 3.61. dsn_notify
+#
+# Type: string
+# Default: (empty)
+#
+# This variable sets the request for when notification is returned. The string
+# consists of a comma separated list (no spaces!) of one or more of the
+# following: never, to never request notification, failure, to request
+# notification on transmission failure, delay, to be notified of message delays,
+# success, to be notified of successful transmission.
+#
+# Example:
+#
+# set dsn_notify="failure,delay"
+#
+# Note: when using $sendmail for delivery, you should not enable this unless you
+# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
+# -compatible interface supporting the -N option for DSN. For SMTP delivery, DSN
+# support is auto-detected so that it depends on the server whether DSN will be
+# used or not.
+#
+
+
+# 3.62. dsn_return
+#
+# Type: string
+# Default: (empty)
+#
+# This variable controls how much of your message is returned in DSN messages. It
+# may be set to either hdrs to return just the message header, or full to return
+# the full message.
+#
+# Example:
+#
+# set dsn_return=hdrs
+#
+# Note: when using $sendmail for delivery, you should not enable this unless you
+# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
+# -compatible interface supporting the -R option for DSN. For SMTP delivery, DSN
+# support is auto-detected so that it depends on the server whether DSN will be
+# used or not.
+#
+
+
+# 3.63. duplicate_threads
+#
+# Type: boolean
+# Default: yes
+#
+# This variable controls whether mutt, when $sort is set to threads, threads
+# messages with the same Message-Id together. If it is set, it will indicate that
+# it thinks they are duplicates of each other with an equals sign in the thread
+# tree.
+#
+
+
+# 3.64. edit_headers
+#
+# Type: boolean
+# Default: no
+#
+# This option allows you to edit the header of your outgoing messages along with
+# the body of your message.
+#
+# Although the compose menu may have localized header labels, the labels passed
+# to your editor will be standard RFC 2822 headers, (e.g. To:, Cc:, Subject:).
+# Headers added in your editor must also be RFC 2822 headers, or one of the
+# pseudo headers listed in “edit-header”. Mutt will not understand localized
+# header labels, just as it would not when parsing an actual email.
+#
+# Note that changes made to the References: and Date: headers are ignored for
+# interoperability reasons.
+#
+set edit_headers=yes
+
+
+# 3.65. editor
+#
+# Type: path
+# Default: (empty)
+#
+# This variable specifies which editor is used by mutt. It defaults to the value
+# of the $VISUAL, or $EDITOR, environment variable, or to the string “vi” if
+# neither of those are set.
+#
+# The $editor string may contain a %s escape, which will be replaced by the name
+# of the file to be edited. If the %s escape does not appear in $editor, a space
+# and the name to be edited are appended.
+#
+# The resulting string is then executed by running
+#
+# sh -c 'string'
+#
+# where string is the expansion of $editor described above.
+#
+set editor="mailplate --edit --auto --keep-unknown"
+
+
+# 3.66. encode_from
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will quoted-printable encode messages when they contain the
+# string “From ” (note the trailing space) in the beginning of a line. This is
+# useful to avoid the tampering certain mail delivery and transport agents tend
+# to do with messages (in order to prevent tools from misinterpreting the line as
+# a mbox message separator).
+#
+
+
+# 3.67. entropy_file
+#
+# Type: path
+# Default: (empty)
+#
+# The file which includes random data that is used to initialize SSL library
+# functions.
+#
+
+
+# 3.68. envelope_from_address
+#
+# Type: e-mail address
+# Default: (empty)
+#
+# Manually sets the envelope sender for outgoing messages. This value is ignored
+# if $use_envelope_from is unset.
+#
+
+
+# 3.69. error_history
+#
+# Type: number
+# Default: 30
+#
+# This variable controls the size (in number of strings remembered) of the error
+# messages displayed by mutt. These can be shown with the <error-history>
+# function. The history is cleared each time this variable is set.
+#
+
+
+# 3.70. escape
+#
+# Type: string
+# Default: “~”
+#
+# Escape character to use for functions in the built-in editor.
+#
+
+
+# 3.71. fast_reply
+#
+# Type: boolean
+# Default: no
+#
+# When set, the initial prompt for recipients and subject are skipped when
+# replying to messages, and the initial prompt for subject is skipped when
+# forwarding messages.
+#
+# Note: this variable has no effect when the $autoedit variable is set.
+#
+set fast_reply=yes
+
+
+# 3.72. fcc_attach
+#
+# Type: quadoption
+# Default: yes
+#
+# This variable controls whether or not attachments on outgoing messages are
+# saved along with the main body of your message.
+#
+set fcc_attach=yes
+
+
+# 3.73. fcc_clear
+#
+# Type: boolean
+# Default: no
+#
+# When this variable is set, FCCs will be stored unencrypted and unsigned, even
+# when the actual message is encrypted and/or signed. (PGP only)
+#
+
+
+# 3.74. flag_safe
+#
+# Type: boolean
+# Default: no
+#
+# If set, flagged messages cannot be deleted.
+#
+
+
+# 3.75. folder
+#
+# Type: path
+# Default: “~/Mail”
+#
+# Specifies the default location of your mailboxes. A “+” or “=” at the beginning
+# of a pathname will be expanded to the value of this variable. Note that if you
+# change this variable (from the default) value you need to make sure that the
+# assignment occurs before you use “+” or “=” for any other variables since
+# expansion takes place when handling the “mailboxes” command.
+#
+set folder="~/mail"
+
+
+# 3.76. folder_format
+#
+# Type: string
+# Default: “%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f”
+#
+# This variable allows you to customize the file browser display to your personal
+# taste. This string is similar to $index_format, but has its own set of printf
+# (3)-like sequences:
+#
+# ┌───┬─────────────────────────────────────────────────────────────────────────┐
+# │%C │current file number │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%d │date/time folder was last modified │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%D │date/time folder was last modified using $date_format. │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%f │filename (“/” is appended to directory names, “@” to symbolic links and “│
+# │ │*” to executable files) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%F │file permissions │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%g │group name (or numeric gid, if missing) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%l │number of hard links │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%m │number of messages in the mailbox * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%n │number of unread messages in the mailbox * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%N │N if mailbox has new mail, blank otherwise │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%s │size in bytes │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%t │“*” if the file is tagged, blank otherwise │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%u │owner name (or numeric uid, if missing) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%>X│right justify the rest of the string and pad with character “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%|X│pad to the end of the line with character “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%*X│soft-fill with character “X” as pad │
+# └───┴─────────────────────────────────────────────────────────────────────────┘
+#
+# For an explanation of “soft-fill”, see the $index_format documentation.
+#
+# * = can be optionally printed if nonzero
+#
+# %m, %n, and %N only work for monitored mailboxes. %m requires $mail_check_stats
+# to be set. %n requires $mail_check_stats to be set (except for IMAP mailboxes).
+#
+
+
+# 3.77. followup_to
+#
+# Type: boolean
+# Default: yes
+#
+# Controls whether or not the “Mail-Followup-To:” header field is generated when
+# sending mail. When set, Mutt will generate this field when you are replying to
+# a known mailing list, specified with the “subscribe” or “lists” commands.
+#
+# This field has two purposes. First, preventing you from receiving duplicate
+# copies of replies to messages which you send to mailing lists, and second,
+# ensuring that you do get a reply separately for any messages sent to known
+# lists to which you are not subscribed.
+#
+# The header will contain only the list's address for subscribed lists, and both
+# the list address and your own email address for unsubscribed lists. Without
+# this header, a group reply to your message sent to a subscribed list will be
+# sent to both the list and your address, resulting in two copies of the same
+# email for you.
+#
+
+
+# 3.78. force_name
+#
+# Type: boolean
+# Default: no
+#
+# This variable is similar to $save_name, except that Mutt will store a copy of
+# your outgoing message by the username of the address you are sending to even if
+# that mailbox does not exist.
+#
+# Also see the $record variable.
+#
+
+
+# 3.79. forward_attribution_intro
+#
+# Type: string
+# Default: “----- Forwarded message from %f -----”
+#
+# This is the string that will precede a message which has been forwarded in the
+# main body of a message (when $mime_forward is unset). For a full listing of
+# defined printf(3)-like sequences see the section on $index_format. See also
+# $attribution_locale.
+#
+
+
+# 3.80. forward_attribution_trailer
+#
+# Type: string
+# Default: “----- End forwarded message -----”
+#
+# This is the string that will follow a message which has been forwarded in the
+# main body of a message (when $mime_forward is unset). For a full listing of
+# defined printf(3)-like sequences see the section on $index_format. See also
+# $attribution_locale.
+#
+
+
+# 3.81. forward_decode
+#
+# Type: boolean
+# Default: yes
+#
+# Controls the decoding of complex MIME messages into text/plain when forwarding
+# a message. The message header is also RFC2047 decoded. This variable is only
+# used, if $mime_forward is unset, otherwise $mime_forward_decode is used
+# instead.
+#
+
+
+# 3.82. forward_decrypt
+#
+# Type: boolean
+# Default: yes
+#
+# Controls the handling of encrypted messages when forwarding a message. When set
+# , the outer layer of encryption is stripped off. This variable is only used if
+# $mime_forward is set and $mime_forward_decode is unset. (PGP only)
+#
+
+
+# 3.83. forward_edit
+#
+# Type: quadoption
+# Default: yes
+#
+# This quadoption controls whether or not the user is automatically placed in the
+# editor when forwarding messages. For those who always want to forward with no
+# modification, use a setting of “no”.
+#
+
+
+# 3.84. forward_format
+#
+# Type: string
+# Default: “[%a: %s]”
+#
+# This variable controls the default subject when forwarding a message. It uses
+# the same format sequences as the $index_format variable.
+#
+set forward_format="(fwd) %s"
+
+
+# 3.85. forward_quote
+#
+# Type: boolean
+# Default: no
+#
+# When set, forwarded messages included in the main body of the message (when
+# $mime_forward is unset) will be quoted using $indent_string.
+#
+
+
+# 3.86. from
+#
+# Type: e-mail address
+# Default: (empty)
+#
+# When set, this variable contains a default from address. It can be overridden
+# using “my_hdr” (including from a “send-hook”) and $reverse_name. This variable
+# is ignored if $use_from is unset.
+#
+# This setting defaults to the contents of the environment variable $EMAIL.
+#
+set from='martin f krafft <madduck@madduck.net>'
+
+
+# 3.87. gecos_mask
+#
+# Type: regular expression
+# Default: “^[^,]*”
+#
+# A regular expression used by mutt to parse the GECOS field of a password entry
+# when expanding the alias. The default value will return the string up to the
+# first “,” encountered. If the GECOS field contains a string like “lastname,
+# firstname” then you should set it to “.*”.
+#
+# This can be useful if you see the following behavior: you address an e-mail to
+# user ID “stevef” whose full name is “Steve Franklin”. If mutt expands “stevef”
+# to “"Franklin" stevef@foo.bar” then you should set the $gecos_mask to a regular
+# expression that will match the whole name so mutt will expand “Franklin” to “
+# Franklin, Steve”.
+#
+
+
+# 3.88. hdrs
+#
+# Type: boolean
+# Default: yes
+#
+# When unset, the header fields normally added by the “my_hdr” command are not
+# created. This variable must be unset before composing a new message or replying
+# in order to take effect. If set, the user defined header fields are added to
+# every new message.
+#
+
+
+# 3.89. header
+#
+# Type: boolean
+# Default: no
+#
+# When set, this variable causes Mutt to include the header of the message you
+# are replying to into the edit buffer. The $weed setting applies.
+#
+
+
+# 3.90. header_cache
+#
+# Type: path
+# Default: (empty)
+#
+# This variable points to the header cache database. If pointing to a directory
+# Mutt will contain a header cache database file per folder, if pointing to a
+# file that file will be a single global header cache. By default it is unset so
+# no header caching will be used.
+#
+# Header caching can greatly improve speed when opening POP, IMAP MH or Maildir
+# folders, see “caching” for details.
+#
+set header_cache="~/.var/mutt/header_cache"
+
+
+# 3.91. header_cache_compress
+#
+# Type: boolean
+# Default: yes
+#
+# When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header cache
+# backend, this option determines whether the database will be compressed.
+# Compression results in database files roughly being one fifth of the usual
+# diskspace, but the decompression can result in a slower opening of cached
+# folder(s) which in general is still much faster than opening non header cached
+# folders.
+#
+set header_cache_compress=no
+
+
+# 3.92. header_cache_pagesize
+#
+# Type: string
+# Default: “16384”
+#
+# When mutt is compiled with either gdbm or bdb4 as the header cache backend,
+# this option changes the database page size. Too large or too small values can
+# waste space, memory, or CPU time. The default should be more or less optimal
+# for most use cases.
+#
+
+
+# 3.93. header_color_partial
+#
+# Type: boolean
+# Default: no
+#
+# When set, color header regexps behave like color body regexps: color is applied
+# to the exact text matched by the regexp. When unset, color is applied to the
+# entire header.
+#
+# One use of this option might be to apply color to just the header labels.
+#
+# See “color” for more details.
+#
+
+
+# 3.94. help
+#
+# Type: boolean
+# Default: yes
+#
+# When set, help lines describing the bindings for the major functions provided
+# by each menu are displayed on the first line of the screen.
+#
+# Note: The binding will not be displayed correctly if the function is bound to a
+# sequence rather than a single keystroke. Also, the help line may not be updated
+# if a binding is changed while Mutt is running. Since this variable is primarily
+# aimed at new users, neither of these should present a major problem.
+#
+
+
+# 3.95. hidden_host
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will skip the host name part of $hostname variable when adding
+# the domain part to addresses. This variable does not affect the generation of
+# Message-IDs, and it will not lead to the cut-off of first-level domains.
+#
+
+
+# 3.96. hide_limited
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will not show the presence of messages that are hidden by
+# limiting, in the thread tree.
+#
+
+
+# 3.97. hide_missing
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will not show the presence of missing messages in the thread
+# tree.
+#
+
+
+# 3.98. hide_thread_subject
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will not show the subject of messages in the thread tree that
+# have the same subject as their parent or closest previously displayed sibling.
+#
+
+
+# 3.99. hide_top_limited
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will not show the presence of messages that are hidden by
+# limiting, at the top of threads in the thread tree. Note that when
+# $hide_limited is set, this option will have no effect.
+#
+
+
+# 3.100. hide_top_missing
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will not show the presence of missing messages at the top of
+# threads in the thread tree. Note that when $hide_missing is set, this option
+# will have no effect.
+#
+
+
+# 3.101. history
+#
+# Type: number
+# Default: 10
+#
+# This variable controls the size (in number of strings remembered) of the string
+# history buffer per category. The buffer is cleared each time the variable is
+# set.
+#
+
+
+# 3.102. history_file
+#
+# Type: path
+# Default: “~/.mutthistory”
+#
+# The file in which Mutt will save its history.
+#
+# Also see $save_history.
+#
+set history_file="~/.var/mutt/history"
+
+
+# 3.103. history_remove_dups
+#
+# Type: boolean
+# Default: no
+#
+# When set, all of the string history will be scanned for duplicates when a new
+# entry is added. Duplicate entries in the $history_file will also be removed
+# when it is periodically compacted.
+#
+
+
+# 3.104. honor_disposition
+#
+# Type: boolean
+# Default: no
+#
+# When set, Mutt will not display attachments with a disposition of “attachment”
+# inline even if it could render the part to plain text. These MIME parts can
+# only be viewed from the attachment menu.
+#
+# If unset, Mutt will render all MIME parts it can properly transform to plain
+# text.
+#
+
+
+# 3.105. honor_followup_to
+#
+# Type: quadoption
+# Default: yes
+#
+# This variable controls whether or not a Mail-Followup-To header is honored when
+# group-replying to a message.
+#
+
+
+# 3.106. hostname
+#
+# Type: string
+# Default: (empty)
+#
+# Specifies the fully-qualified hostname of the system mutt is running on
+# containing the host's name and the DNS domain it belongs to. It is used as the
+# domain part (after “@”) for local email addresses as well as Message-Id
+# headers.
+#
+# Its value is determined at startup as follows: the node's hostname is first
+# determined by the uname(3) function. The domain is then looked up using the
+# gethostname(2) and getaddrinfo(3) functions. If those calls are unable to
+# determine the domain, the full value returned by uname is used. Optionally,
+# Mutt can be compiled with a fixed domain name in which case a detected one is
+# not used.
+#
+# Also see $use_domain and $hidden_host.
+#
+
+
+# 3.107. idn_decode
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will show you international domain names decoded. Note: You can
+# use IDNs for addresses even if this is unset. This variable only affects
+# decoding. (IDN only)
+#
+
+
+# 3.108. idn_encode
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will encode international domain names using IDN. Unset this if
+# your SMTP server can handle newer (RFC 6531) UTF-8 encoded domains. (IDN only)
+#
+
+
+# 3.109. ignore_linear_white_space
+#
+# Type: boolean
+# Default: no
+#
+# This option replaces linear-white-space between encoded-word and text to a
+# single space to prevent the display of MIME-encoded “Subject:” field from being
+# divided into multiple lines.
+#
+
+
+# 3.110. ignore_list_reply_to
+#
+# Type: boolean
+# Default: no
+#
+# Affects the behavior of the <reply> function when replying to messages from
+# mailing lists (as defined by the “subscribe” or “lists” commands). When set, if
+# the “Reply-To:” field is set to the same value as the “To:” field, Mutt assumes
+# that the “Reply-To:” field was set by the mailing list to automate responses to
+# the list, and will ignore this field. To direct a response to the mailing list
+# when this option is set, use the <list-reply> function; <group-reply> will
+# reply to both the sender and the list.
+#
+set ignore_list_reply_to=yes
+
+
+# 3.111. imap_authenticators
+#
+# Type: string
+# Default: (empty)
+#
+# This is a colon-delimited list of authentication methods mutt may attempt to
+# use to log in to an IMAP server, in the order mutt should try them.
+# Authentication methods are either “login” or the right side of an IMAP “AUTH=
+# xxx” capability string, e.g. “digest-md5”, “gssapi” or “cram-md5”. This option
+# is case-insensitive. If it's unset (the default) mutt will try all available
+# methods, in order from most-secure to least-secure.
+#
+# Example:
+#
+# set imap_authenticators="gssapi:cram-md5:login"
+#
+# Note: Mutt will only fall back to other authentication methods if the previous
+# methods are unavailable. If a method is available but authentication fails,
+# mutt will not connect to the IMAP server.
+#
+
+
+# 3.112. imap_check_subscribed
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will fetch the set of subscribed folders from your server on
+# connection, and add them to the set of mailboxes it polls for new mail just as
+# if you had issued individual “mailboxes” commands.
+#
+
+
+# 3.113. imap_delim_chars
+#
+# Type: string
+# Default: “/.”
+#
+# This contains the list of characters which you would like to treat as folder
+# separators for displaying IMAP paths. In particular it helps in using the “=”
+# shortcut for your folder variable.
+#
+
+
+# 3.114. imap_headers
+#
+# Type: string
+# Default: (empty)
+#
+# Mutt requests these header fields in addition to the default headers (“Date:”,
+# “From:”, “Subject:”, “To:”, “Cc:”, “Message-Id:”, “References:”, “Content-Type:
+# ”, “Content-Description:”, “In-Reply-To:”, “Reply-To:”, “Lines:”, “List-Post:”,
+# “X-Label:”) from IMAP servers before displaying the index menu. You may want to
+# add more headers for spam detection.
+#
+# Note: This is a space separated list, items should be uppercase and not contain
+# the colon, e.g. “X-BOGOSITY X-SPAM-STATUS” for the “X-Bogosity:” and “
+# X-Spam-Status:” header fields.
+#
+
+
+# 3.115. imap_idle
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will attempt to use the IMAP IDLE extension to check for new
+# mail in the current mailbox. Some servers (dovecot was the inspiration for this
+# option) react badly to mutt's implementation. If your connection seems to
+# freeze up periodically, try unsetting this.
+#
+
+
+# 3.116. imap_keepalive
+#
+# Type: number
+# Default: 300
+#
+# This variable specifies the maximum amount of time in seconds that mutt will
+# wait before polling open IMAP connections, to prevent the server from closing
+# them before mutt has finished with them. The default is well within the
+# RFC-specified minimum amount of time (30 minutes) before a server is allowed to
+# do this, but in practice the RFC does get violated every now and then. Reduce
+# this number if you find yourself getting disconnected from your IMAP server due
+# to inactivity.
+#
+
+
+# 3.117. imap_list_subscribed
+#
+# Type: boolean
+# Default: no
+#
+# This variable configures whether IMAP folder browsing will look for only
+# subscribed folders or all folders. This can be toggled in the IMAP browser with
+# the <toggle-subscribed> function.
+#
+
+
+# 3.118. imap_login
+#
+# Type: string
+# Default: (empty)
+#
+# Your login name on the IMAP server.
+#
+# This variable defaults to the value of $imap_user.
+#
+
+
+# 3.119. imap_oauth_refresh_command
+#
+# Type: string
+# Default: (empty)
+#
+# The command to run to generate an OAUTH refresh token for authorizing your
+# connection to your IMAP server. This command will be run on every connection
+# attempt that uses the OAUTHBEARER authentication mechanism.
+#
+
+
+# 3.120. imap_pass
+#
+# Type: string
+# Default: (empty)
+#
+# Specifies the password for your IMAP account. If unset, Mutt will prompt you
+# for your password when you invoke the <imap-fetch-mail> function or try to open
+# an IMAP folder.
+#
+# Warning: you should only use this option when you are on a fairly secure
+# machine, because the superuser can read your muttrc even if you are the only
+# one who can read the file.
+#
+
+
+# 3.121. imap_passive
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will not open new IMAP connections to check for new mail. Mutt
+# will only check for new mail over existing IMAP connections. This is useful if
+# you don't want to be prompted to user/password pairs on mutt invocation, or if
+# opening the connection is slow.
+#
+
+
+# 3.122. imap_peek
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will avoid implicitly marking your mail as read whenever you
+# fetch a message from the server. This is generally a good thing, but can make
+# closing an IMAP folder somewhat slower. This option exists to appease speed
+# freaks.
+#
+
+
+# 3.123. imap_pipeline_depth
+#
+# Type: number
+# Default: 15
+#
+# Controls the number of IMAP commands that may be queued up before they are sent
+# to the server. A deeper pipeline reduces the amount of time mutt must wait for
+# the server, and can make IMAP servers feel much more responsive. But not all
+# servers correctly handle pipelined commands, so if you have problems you might
+# want to try setting this variable to 0.
+#
+# Note: Changes to this variable have no effect on open connections.
+#
+
+
+# 3.124. imap_poll_timeout
+#
+# Type: number
+# Default: 15
+#
+# This variable specifies the maximum amount of time in seconds that mutt will
+# wait for a response when polling IMAP connections for new mail, before timing
+# out and closing the connection. Set to 0 to disable timing out.
+#
+
+
+# 3.125. imap_servernoise
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will display warning messages from the IMAP server as error
+# messages. Since these messages are often harmless, or generated due to
+# configuration problems on the server which are out of the users' hands, you may
+# wish to suppress them at some point.
+#
+
+
+# 3.126. imap_user
+#
+# Type: string
+# Default: (empty)
+#
+# The name of the user whose mail you intend to access on the IMAP server.
+#
+# This variable defaults to your user name on the local machine.
+#
+
+
+# 3.127. implicit_autoview
+#
+# Type: boolean
+# Default: no
+#
+# If set to “yes”, mutt will look for a mailcap entry with the “copiousoutput”
+# flag set for every MIME attachment it doesn't have an internal viewer defined
+# for. If such an entry is found, mutt will use the viewer defined in that entry
+# to convert the body part to text form.
+#
+set implicit_autoview=no
+
+
+# 3.128. include
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# Controls whether or not a copy of the message(s) you are replying to is
+# included in your reply.
+#
+set include=yes
+
+
+# 3.129. include_onlyfirst
+#
+# Type: boolean
+# Default: no
+#
+# Controls whether or not Mutt includes only the first attachment of the message
+# you are replying.
+#
+
+
+# 3.130. indent_string
+#
+# Type: string
+# Default: “> ”
+#
+# Specifies the string to prepend to each line of text quoted in a message to
+# which you are replying. You are strongly encouraged not to change this value,
+# as it tends to agitate the more fanatical netizens.
+#
+# The value of this option is ignored if $text_flowed is set, because the quoting
+# mechanism is strictly defined for format=flowed.
+#
+# This option is a format string, please see the description of $index_format for
+# supported printf(3)-style sequences.
+#
+
+
+# 3.131. index_format
+#
+# Type: string
+# Default: “%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s”
+#
+# This variable allows you to customize the message index display to your
+# personal taste.
+#
+# “Format strings” are similar to the strings used in the C function printf(3) to
+# format output (see the man page for more details). For an explanation of the %?
+# construct, see the $status_format description. The following sequences are
+# defined in Mutt:
+#
+# ┌─────┬───────────────────────────────────────────────────────────────────────┐
+# │%a │address of the author │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%A │reply-to address (if present; otherwise: address of author) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%b │filename of the original message folder (think mailbox) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%B │the list to which the letter was sent, or else the folder name (%b). │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%c │number of characters (bytes) in the message │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%C │current message number │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%d │date and time of the message in the format specified by $date_format │
+# │ │converted to sender's time zone │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%D │date and time of the message in the format specified by $date_format │
+# │ │converted to the local time zone │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%e │current message number in thread │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%E │number of messages in current thread │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%f │sender (address + real name), either From: or Return-Path: │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%F │author name, or recipient name if the message is from you │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%H │spam attribute(s) of this message │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%i │message-id of the current message │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%l │number of lines in the message (does not work with maildir, mh, and │
+# │ │possibly IMAP folders) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │ │If an address in the “To:” or “Cc:” header field matches an address │
+# │%L │defined by the users “subscribe” command, this displays "To <list-name>│
+# │ │", otherwise the same as %F. │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%m │total number of message in the mailbox │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%M │number of hidden messages if the thread is collapsed. │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%N │message score │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%n │author's real name (or address if missing) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%O │original save folder where mutt would formerly have stashed the │
+# │ │message: list name or recipient name if not sent to a list │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%P │progress indicator for the built-in pager (how much of the file has │
+# │ │been displayed) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%r │comma separated list of “To:” recipients │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%R │comma separated list of “Cc:” recipients │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%s │subject of the message │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%S │single character status of the message (“N”/“O”/“D”/“d”/“!”/“r”/“*”) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%t │“To:” field (recipients) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%T │the appropriate character from the $to_chars string │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%u │user (login) name of the author │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%v │first name of the author, or the recipient if the message is from you │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%X │number of attachments (please see the “attachments” section for │
+# │ │possible speed effects) │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%y │“X-Label:” field, if present │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │ │“X-Label:” field, if present, and (1) not at part of a thread tree, (2)│
+# │%Y │at the top of a thread, or (3) “X-Label:” is different from preceding │
+# │ │message's “X-Label:”. │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │ │a three character set of message status flags. the first character is │
+# │%Z │new/read/replied flags (“n”/“o”/“r”/“O”/“N”). the second is deleted or │
+# │ │encryption flags (“D”/“d”/“S”/“P”/“s”/“K”). the third is either tagged/│
+# │ │flagged (“*”/“!”), or one of the characters listed in $to_chars. │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │% │the date and time of the message is converted to sender's time zone, │
+# │{fmt}│and “fmt” is expanded by the library function strftime(3); a leading │
+# │ │bang disables locales │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │% │the date and time of the message is converted to the local time zone, │
+# │[fmt]│and “fmt” is expanded by the library function strftime(3); a leading │
+# │ │bang disables locales │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │% │the local date and time when the message was received. “fmt” is │
+# │(fmt)│expanded by the library function strftime(3); a leading bang disables │
+# │ │locales │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │% │the current local time. “fmt” is expanded by the library function │
+# │<fmt>│strftime(3); a leading bang disables locales. │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%>X │right justify the rest of the string and pad with character “X” │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%|X │pad to the end of the line with character “X” │
+# ├─────┼───────────────────────────────────────────────────────────────────────┤
+# │%*X │soft-fill with character “X” as pad │
+# └─────┴───────────────────────────────────────────────────────────────────────┘
+#
+# “Soft-fill” deserves some explanation: Normal right-justification will print
+# everything to the left of the “%>”, displaying padding and whatever lies to the
+# right only if there's room. By contrast, soft-fill gives priority to the
+# right-hand side, guaranteeing space to display it and showing padding only if
+# there's still room. If necessary, soft-fill will eat text leftwards to make
+# room for rightward text.
+#
+# Note that these expandos are supported in “save-hook”, “fcc-hook” and “
+# fcc-save-hook”, too.
+#
+
+
+# 3.132. ispell
+#
+# Type: path
+# Default: “ispell”
+#
+# How to invoke ispell (GNU's spell-checking software).
+#
+
+
+# 3.133. keep_flagged
+#
+# Type: boolean
+# Default: no
+#
+# If set, read messages marked as flagged will not be moved from your spool
+# mailbox to your $mbox mailbox, or as a result of a “mbox-hook” command.
+#
+
+
+# 3.134. mail_check
+#
+# Type: number
+# Default: 5
+#
+# This variable configures how often (in seconds) mutt should look for new mail.
+# Also see the $timeout variable.
+#
+
+
+# 3.135. mail_check_recent
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will only notify you about new mail that has been received since
+# the last time you opened the mailbox. When unset, Mutt will notify you if any
+# new mail exists in the mailbox, regardless of whether you have visited it
+# recently.
+#
+# When $mark_old is set, Mutt does not consider the mailbox to contain new mail
+# if only old messages exist.
+#
+
+
+# 3.136. mail_check_stats
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will periodically calculate message statistics of a mailbox
+# while polling for new mail. It will check for unread, flagged, and total
+# message counts. Because this operation is more performance intensive, it
+# defaults to unset, and has a separate option, $mail_check_stats_interval, to
+# control how often to update these counts.
+#
+
+
+# 3.137. mail_check_stats_interval
+#
+# Type: number
+# Default: 60
+#
+# When $mail_check_stats is set, this variable configures how often (in seconds)
+# mutt will update message counts.
+#
+
+
+# 3.138. mailcap_path
+#
+# Type: string
+# Default: (empty)
+#
+# This variable specifies which files to consult when attempting to display MIME
+# bodies not directly supported by Mutt.
+#
+set mailcap_path="$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump"
+
+
+# 3.139. mailcap_sanitize
+#
+# Type: boolean
+# Default: yes
+#
+# If set, mutt will restrict possible characters in mailcap % expandos to a
+# well-defined set of safe characters. This is the safe setting, but we are not
+# sure it doesn't break some more advanced MIME stuff.
+#
+# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
+#
+
+
+# 3.140. maildir_header_cache_verify
+#
+# Type: boolean
+# Default: yes
+#
+# Check for Maildir unaware programs other than mutt having modified maildir
+# files when the header cache is in use. This incurs one stat(2) per message
+# every time the folder is opened (which can be very slow for NFS folders).
+#
+set maildir_header_cache_verify=no
+
+
+# 3.141. maildir_trash
+#
+# Type: boolean
+# Default: no
+#
+# If set, messages marked as deleted will be saved with the maildir trashed flag
+# instead of unlinked. Note: this only applies to maildir-style mailboxes.
+# Setting it will have no effect on other mailbox types.
+#
+
+
+# 3.142. maildir_check_cur
+#
+# Type: boolean
+# Default: no
+#
+# If set, mutt will poll both the new and cur directories of a maildir folder for
+# new messages. This might be useful if other programs interacting with the
+# folder (e.g. dovecot) are moving new messages to the cur directory. Note that
+# setting this option may slow down polling for new messages in large folders,
+# since mutt has to scan all cur messages.
+#
+
+
+# 3.143. mark_macro_prefix
+#
+# Type: string
+# Default: “'”
+#
+# Prefix for macros created using mark-message. A new macro automatically
+# generated with <mark-message>a will be composed from this prefix and the letter
+# a.
+#
+
+
+# 3.144. mark_old
+#
+# Type: boolean
+# Default: yes
+#
+# Controls whether or not mutt marks new unread messages as old if you exit a
+# mailbox without reading them. With this option set, the next time you start
+# mutt, the messages will show up with an “O” next to them in the index menu,
+# indicating that they are old.
+#
+set mark_old=yes
+
+
+# 3.145. markers
+#
+# Type: boolean
+# Default: yes
+#
+# Controls the display of wrapped lines in the internal pager. If set, a “+”
+# marker is displayed at the beginning of wrapped lines.
+#
+# Also see the $smart_wrap variable.
+#
+set markers=no
+
+
+# 3.146. mask
+#
+# Type: regular expression
+# Default: “!^.[^.]”
+#
+# A regular expression used in the file browser, optionally preceded by the not
+# operator “!”. Only files whose names match this mask will be shown. The match
+# is always case-sensitive.
+#
+
+
+# 3.147. mbox
+#
+# Type: path
+# Default: “~/mbox”
+#
+# This specifies the folder into which read mail in your $spoolfile folder will
+# be appended.
+#
+# Also see the $move variable.
+#
+
+
+# 3.148. mbox_type
+#
+# Type: folder magic
+# Default: mbox
+#
+# The default mailbox type used when creating new folders. May be any of “mbox”,
+# “MMDF”, “MH” and “Maildir”. This is overridden by the -m command-line option.
+#
+set mbox_type=Maildir
+
+
+# 3.149. menu_context
+#
+# Type: number
+# Default: 0
+#
+# This variable controls the number of lines of context that are given when
+# scrolling through menus. (Similar to $pager_context.)
+#
+set menu_context=2
+
+
+# 3.150. menu_move_off
+#
+# Type: boolean
+# Default: yes
+#
+# When unset, the bottom entry of menus will never scroll up past the bottom of
+# the screen, unless there are less entries than lines. When set, the bottom
+# entry may move off the bottom.
+#
+
+
+# 3.151. menu_scroll
+#
+# Type: boolean
+# Default: no
+#
+# When set, menus will be scrolled up or down one line when you attempt to move
+# across a screen boundary. If unset, the screen is cleared and the next or
+# previous page of the menu is displayed (useful for slow links to avoid many
+# redraws).
+#
+set menu_scroll=yes
+
+
+# 3.152. message_cache_clean
+#
+# Type: boolean
+# Default: no
+#
+# If set, mutt will clean out obsolete entries from the message cache when the
+# mailbox is synchronized. You probably only want to set it every once in a
+# while, since it can be a little slow (especially for large folders).
+#
+
+
+# 3.153. message_cachedir
+#
+# Type: path
+# Default: (empty)
+#
+# Set this to a directory and mutt will cache copies of messages from your IMAP
+# and POP servers here. You are free to remove entries at any time.
+#
+# When setting this variable to a directory, mutt needs to fetch every remote
+# message only once and can perform regular expression searches as fast as for
+# local folders.
+#
+# Also see the $message_cache_clean variable.
+#
+
+
+# 3.154. message_format
+#
+# Type: string
+# Default: “%s”
+#
+# This is the string displayed in the “attachment” menu for attachments of type
+# message/rfc822. For a full listing of defined printf(3)-like sequences see the
+# section on $index_format.
+#
+
+
+# 3.155. meta_key
+#
+# Type: boolean
+# Default: no
+#
+# If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if
+# the user had pressed the Esc key and whatever key remains after having the high
+# bit removed. For example, if the key pressed has an ASCII value of 0xf8, then
+# this is treated as if the user had pressed Esc then “x”. This is because the
+# result of removing the high bit from 0xf8 is 0x78, which is the ASCII character
+# “x”.
+#
+
+
+# 3.156. metoo
+#
+# Type: boolean
+# Default: no
+#
+# If unset, Mutt will remove your address (see the “alternates” command) from the
+# list of recipients when replying to a message.
+#
+
+
+# 3.157. mh_purge
+#
+# Type: boolean
+# Default: no
+#
+# When unset, mutt will mimic mh's behavior and rename deleted messages to ,<old
+# file name> in mh folders instead of really deleting them. This leaves the
+# message on disk but makes programs reading the folder ignore it. If the
+# variable is set, the message files will simply be deleted.
+#
+# This option is similar to $maildir_trash for Maildir folders.
+#
+
+
+# 3.158. mh_seq_flagged
+#
+# Type: string
+# Default: “flagged”
+#
+# The name of the MH sequence used for flagged messages.
+#
+
+
+# 3.159. mh_seq_replied
+#
+# Type: string
+# Default: “replied”
+#
+# The name of the MH sequence used to tag replied messages.
+#
+
+
+# 3.160. mh_seq_unseen
+#
+# Type: string
+# Default: “unseen”
+#
+# The name of the MH sequence used for unseen messages.
+#
+
+
+# 3.161. mime_forward
+#
+# Type: quadoption
+# Default: no
+#
+# When set, the message you are forwarding will be attached as a separate message
+# /rfc822 MIME part instead of included in the main body of the message. This is
+# useful for forwarding MIME messages so the receiver can properly view the
+# message as it was delivered to you. If you like to switch between MIME and not
+# MIME from mail to mail, set this variable to “ask-no” or “ask-yes”.
+#
+# Also see $forward_decode and $mime_forward_decode.
+#
+set mime_forward=ask-yes
+
+
+# 3.162. mime_forward_decode
+#
+# Type: boolean
+# Default: no
+#
+# Controls the decoding of complex MIME messages into text/plain when forwarding
+# a message while $mime_forward is set. Otherwise $forward_decode is used
+# instead.
+#
+
+
+# 3.163. mime_forward_rest
+#
+# Type: quadoption
+# Default: yes
+#
+# When forwarding multiple attachments of a MIME message from the attachment
+# menu, attachments which cannot be decoded in a reasonable manner will be
+# attached to the newly composed message if this option is set.
+#
+
+
+# 3.164. mime_type_query_command
+#
+# Type: string
+# Default: (empty)
+#
+# This specifies a command to run, to determine the mime type of a new attachment
+# when composing a message. Unless $mime_type_query_first is set, this will only
+# be run if the attachment's extension is not found in the mime.types file.
+#
+# The string may contain a “%s”, which will be substituted with the attachment
+# filename. Mutt will add quotes around the string substituted for “%s”
+# automatically according to shell quoting rules, so you should avoid adding your
+# own. If no “%s” is found in the string, Mutt will append the attachment
+# filename to the end of the string.
+#
+# The command should output a single line containing the attachment's mime type.
+#
+# Suggested values are “xdg-mime query filetype” or “file -bi”.
+#
+
+
+# 3.165. mime_type_query_first
+#
+# Type: boolean
+# Default: no
+#
+# When set, the $mime_type_query_command will be run before the mime.types
+# lookup.
+#
+
+
+# 3.166. mix_entry_format
+#
+# Type: string
+# Default: “%4n %c %-16s %a”
+#
+# This variable describes the format of a remailer line on the mixmaster chain
+# selection screen. The following printf(3)-like sequences are supported:
+#
+# ┌──┬───────────────────────────────┐
+# │%n│The running number on the menu.│
+# ├──┼───────────────────────────────┤
+# │%c│Remailer capabilities. │
+# ├──┼───────────────────────────────┤
+# │%s│The remailer's short name. │
+# ├──┼───────────────────────────────┤
+# │%a│The remailer's e-mail address. │
+# └──┴───────────────────────────────┘
+#
+
+
+# 3.167. mixmaster
+#
+# Type: path
+# Default: “mixmaster”
+#
+# This variable contains the path to the Mixmaster binary on your system. It is
+# used with various sets of parameters to gather the list of known remailers, and
+# to finally send a message through the mixmaster chain.
+#
+set mixmaster="mixmaster-filter"
+
+
+# 3.168. move
+#
+# Type: quadoption
+# Default: no
+#
+# Controls whether or not Mutt will move read messages from your spool mailbox to
+# your $mbox mailbox, or as a result of a “mbox-hook” command.
+#
+set move=no
+
+
+# 3.169. narrow_tree
+#
+# Type: boolean
+# Default: no
+#
+# This variable, when set, makes the thread tree narrower, allowing deeper
+# threads to fit on the screen.
+#
+set narrow_tree=yes
+
+
+# 3.170. net_inc
+#
+# Type: number
+# Default: 10
+#
+# Operations that expect to transfer a large amount of data over the network will
+# update their progress every $net_inc kilobytes. If set to 0, no progress
+# messages will be displayed.
+#
+# See also $read_inc, $write_inc and $net_inc.
+#
+
+
+# 3.171. new_mail_command
+#
+# Type: path
+# Default: (empty)
+#
+# If set, Mutt will call this command after a new message is received. See the
+# $status_format documentation for the values that can be formatted into this
+# command.
+#
+
+
+# 3.172. pager
+#
+# Type: path
+# Default: “builtin”
+#
+# This variable specifies which pager you would like to use to view messages. The
+# value “builtin” means to use the built-in pager, otherwise this variable should
+# specify the pathname of the external pager you would like to use.
+#
+# Using an external pager may have some disadvantages: Additional keystrokes are
+# necessary because you can't call mutt functions directly from the pager, and
+# screen resizes cause lines longer than the screen width to be badly formatted
+# in the help menu.
+#
+
+
+# 3.173. pager_context
+#
+# Type: number
+# Default: 0
+#
+# This variable controls the number of lines of context that are given when
+# displaying the next or previous page in the internal pager. By default, Mutt
+# will display the line after the last one on the screen at the top of the next
+# page (0 lines of context).
+#
+# This variable also specifies the amount of context given for search results. If
+# positive, this many lines will be given before a match, if 0, the match will be
+# top-aligned.
+#
+set pager_context=2
+
+
+# 3.174. pager_format
+#
+# Type: string
+# Default: “-%Z- %C/%m: %-20.20n %s%* -- (%P)”
+#
+# This variable controls the format of the one-line message “status” displayed
+# before each message in either the internal or an external pager. The valid
+# sequences are listed in the $index_format section.
+#
+set pager_format="<%a> %* %i (%P)"
+
+
+# 3.175. pager_index_lines
+#
+# Type: number
+# Default: 0
+#
+# Determines the number of lines of a mini-index which is shown when in the
+# pager. The current message, unless near the top or bottom of the folder, will
+# be roughly one third of the way down this mini-index, giving the reader the
+# context of a few messages before and after the message. This is useful, for
+# example, to determine how many messages remain to be read in the current
+# thread. One of the lines is reserved for the status bar from the index, so a
+# setting of 6 will only show 5 lines of the actual index. A value of 0 results
+# in no index being shown. If the number of messages in the current folder is
+# less than $pager_index_lines, then the index will only use as many lines as it
+# needs.
+#
+set pager_index_lines=5
+
+
+# 3.176. pager_stop
+#
+# Type: boolean
+# Default: no
+#
+# When set, the internal-pager will not move to the next message when you are at
+# the end of a message and invoke the <next-page> function.
+#
+set pager_stop=yes
+
+
+# 3.177. pgp_auto_decode
+#
+# Type: boolean
+# Default: no
+#
+# If set, mutt will automatically attempt to decrypt traditional PGP messages
+# whenever the user performs an operation which ordinarily would result in the
+# contents of the message being operated on. For example, if the user displays a
+# pgp-traditional message which has not been manually checked with the
+# <check-traditional-pgp> function, mutt will automatically check the message for
+# traditional pgp.
+#
+set pgp_auto_decode=yes
+
+
+# 3.178. pgp_autoinline
+#
+# Type: boolean
+# Default: no
+#
+# This option controls whether Mutt generates old-style inline (traditional) PGP
+# encrypted or signed messages under certain circumstances. This can be
+# overridden by use of the pgp menu, when inline is not required. The GPGME
+# backend does not support this option.
+#
+# Note that Mutt might automatically use PGP/MIME for messages which consist of
+# more than a single MIME part. Mutt can be configured to ask before sending PGP/
+# MIME messages when inline (traditional) would not work.
+#
+# Also see the $pgp_mime_auto variable.
+#
+# Also note that using the old-style PGP message format is strongly deprecated.
+# (PGP only)
+#
+
+
+# 3.179. pgp_check_exit
+#
+# Type: boolean
+# Default: yes
+#
+# If set, mutt will check the exit code of the PGP subprocess when signing or
+# encrypting. A non-zero exit code means that the subprocess failed. (PGP only)
+#
+
+
+# 3.180. pgp_check_gpg_decrypt_status_fd
+#
+# Type: boolean
+# Default: yes
+#
+# If set, mutt will check the status file descriptor output of
+# $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes indicating
+# successful decryption. This will check for the presence of DECRYPTION_OKAY,
+# absence of DECRYPTION_FAILED, and that all PLAINTEXT occurs between the
+# BEGIN_DECRYPTION and END_DECRYPTION status codes.
+#
+# If unset, mutt will instead match the status fd output against
+# $pgp_decryption_okay. (PGP only)
+#
+
+
+# 3.181. pgp_clearsign_command
+#
+# Type: string
+# Default: (empty)
+#
+# This format is used to create an old-style “clearsigned” PGP message. Note that
+# the use of this format is strongly deprecated.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.182. pgp_decode_command
+#
+# Type: string
+# Default: (empty)
+#
+# This format strings specifies a command which is used to decode application/pgp
+# attachments.
+#
+# The PGP command formats have their own set of printf(3)-like sequences:
+#
+# ┌──┬──────────────────────────────────────────────────────────────────────────┐
+# │%p│Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string │
+# │ │otherwise. Note: This may be used with a %? construct. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%f│Expands to the name of a file containing a message. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%s│Expands to the name of a file containing the signature part of a multipart│
+# │ │/signed attachment when verifying it. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%a│The value of $pgp_sign_as if set, otherwise the value of $pgp_default_key.│
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%r│One or more key IDs (or fingerprints if available). │
+# └──┴──────────────────────────────────────────────────────────────────────────┘
+#
+# For examples on how to configure these formats for the various versions of PGP
+# which are floating around, see the pgp and gpg sample configuration files in
+# the samples/ subdirectory which has been installed on your system alongside the
+# documentation. (PGP only)
+#
+
+
+# 3.183. pgp_decrypt_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to decrypt a PGP encrypted message.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.184. pgp_decryption_okay
+#
+# Type: regular expression
+# Default: (empty)
+#
+# If you assign text to this variable, then an encrypted PGP message is only
+# considered successfully decrypted if the output from $pgp_decrypt_command
+# contains the text. This is used to protect against a spoofed encrypted message,
+# with multipart/encrypted headers but containing a block that is not actually
+# encrypted. (e.g. simply signed and ascii armored text).
+#
+# Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable is ignored.
+# (PGP only)
+#
+
+
+# 3.185. pgp_default_key
+#
+# Type: string
+# Default: (empty)
+#
+# This is the default key-pair to use for PGP operations. It will be used for
+# encryption (see $postpone_encrypt and $pgp_self_encrypt).
+#
+# It will also be used for signing unless $pgp_sign_as is set.
+#
+# The (now deprecated) pgp_self_encrypt_as is an alias for this variable, and
+# should no longer be used. (PGP only)
+#
+
+
+# 3.186. pgp_encrypt_only_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to encrypt a body part without signing it.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.187. pgp_encrypt_sign_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to both sign and encrypt a body part.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.188. pgp_entry_format
+#
+# Type: string
+# Default: “%4n %t%f %4l/0x%k %-4a %2c %u”
+#
+# This variable allows you to customize the PGP key selection menu to your
+# personal taste. This string is similar to $index_format, but has its own set of
+# printf(3)-like sequences:
+#
+# ┌──────┬──────────────────────────────────────────────────────┐
+# │%n │number │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%k │key id │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%u │user id │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%a │algorithm │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%l │key length │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%f │flags │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%c │capabilities │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%t │trust/validity of the key-uid association │
+# ├──────┼──────────────────────────────────────────────────────┤
+# │%[<s>]│date of the key where <s> is an strftime(3) expression│
+# └──────┴──────────────────────────────────────────────────────┘
+#
+# (PGP only)
+#
+
+
+# 3.189. pgp_export_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to export a public key from the user's key ring.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.190. pgp_getkeys_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is invoked whenever Mutt needs to fetch the public key associated
+# with an email address. Of the sequences supported by $pgp_decode_command, %r is
+# the only printf(3)-like sequence used with this format. Note that in this case,
+# %r expands to the email address, not the public key ID (the key ID is unknown,
+# which is why Mutt is invoking this command). (PGP only)
+#
+
+
+# 3.191. pgp_good_sign
+#
+# Type: regular expression
+# Default: (empty)
+#
+# If you assign a text to this variable, then a PGP signature is only considered
+# verified if the output from $pgp_verify_command contains the text. Use this
+# variable if the exit code from the command is 0 even for bad signatures. (PGP
+# only)
+#
+
+
+# 3.192. pgp_ignore_subkeys
+#
+# Type: boolean
+# Default: yes
+#
+# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the
+# principal key will inherit the subkeys' capabilities. Unset this if you want to
+# play interesting key selection games. (PGP only)
+#
+
+
+# 3.193. pgp_import_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to import a key from a message into the user's public key
+# ring.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.194. pgp_list_pubring_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to list the public key ring's contents. The output format
+# must be analogous to the one used by
+#
+# gpg --list-keys --with-colons --with-fingerprint
+#
+# This format is also generated by the pgpring utility which comes with mutt.
+#
+# Note: gpg's fixed-list-mode option should not be used. It produces a different
+# date format which may result in mutt showing incorrect key generation dates.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.195. pgp_list_secring_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to list the secret key ring's contents. The output format
+# must be analogous to the one used by:
+#
+# gpg --list-keys --with-colons --with-fingerprint
+#
+# This format is also generated by the pgpring utility which comes with mutt.
+#
+# Note: gpg's fixed-list-mode option should not be used. It produces a different
+# date format which may result in mutt showing incorrect key generation dates.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.196. pgp_long_ids
+#
+# Type: boolean
+# Default: yes
+#
+# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. NOTE:
+# Internally, Mutt has transitioned to using fingerprints (or long key IDs as a
+# fallback). This option now only controls the display of key IDs in the key
+# selection menu and a few other places. (PGP only)
+#
+
+
+# 3.197. pgp_mime_auto
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# This option controls whether Mutt will prompt you for automatically sending a
+# (signed/encrypted) message using PGP/MIME when inline (traditional) fails (for
+# any reason).
+#
+# Also note that using the old-style PGP message format is strongly deprecated.
+# (PGP only)
+#
+
+
+# 3.198. pgp_replyinline
+#
+# Type: boolean
+# Default: no
+#
+# Setting this variable will cause Mutt to always attempt to create an inline
+# (traditional) message when replying to a message which is PGP encrypted/signed
+# inline. This can be overridden by use of the pgp menu, when inline is not
+# required. This option does not automatically detect if the (replied-to) message
+# is inline; instead it relies on Mutt internals for previously checked/flagged
+# messages.
+#
+# Note that Mutt might automatically use PGP/MIME for messages which consist of
+# more than a single MIME part. Mutt can be configured to ask before sending PGP/
+# MIME messages when inline (traditional) would not work.
+#
+# Also see the $pgp_mime_auto variable.
+#
+# Also note that using the old-style PGP message format is strongly deprecated.
+# (PGP only)
+#
+
+
+# 3.199. pgp_retainable_sigs
+#
+# Type: boolean
+# Default: no
+#
+# If set, signed and encrypted messages will consist of nested multipart/signed
+# and multipart/encrypted body parts.
+#
+# This is useful for applications like encrypted and signed mailing lists, where
+# the outer layer (multipart/encrypted) can be easily removed, while the inner
+# multipart/signed part is retained. (PGP only)
+#
+set pgp_retainable_sigs=yes
+
+
+# 3.200. pgp_self_encrypt
+#
+# Type: boolean
+# Default: yes
+#
+# When set, PGP encrypted messages will also be encrypted using the key in
+# $pgp_default_key. (PGP only)
+#
+
+
+# 3.201. pgp_show_unusable
+#
+# Type: boolean
+# Default: yes
+#
+# If set, mutt will display non-usable keys on the PGP key selection menu. This
+# includes keys which have been revoked, have expired, or have been marked as “
+# disabled” by the user. (PGP only)
+#
+set pgp_show_unusable=no
+
+
+# 3.202. pgp_sign_as
+#
+# Type: string
+# Default: (empty)
+#
+# If you have a different key pair to use for signing, you should set this to the
+# signing key. Most people will only need to set $pgp_default_key. It is
+# recommended that you use the keyid form to specify your key (e.g. 0x00112233).
+# (PGP only)
+#
+set pgp_sign_as="0x9C9D6979AE941637"
+
+
+# 3.203. pgp_sign_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to create the detached PGP signature for a multipart/
+# signed PGP/MIME body part.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.204. pgp_sort_keys
+#
+# Type: sort order
+# Default: address
+#
+# Specifies how the entries in the pgp menu are sorted. The following are legal
+# values:
+#
+# ┌───────┬──────────────────────────────┐
+# │address│sort alphabetically by user id│
+# ├───────┼──────────────────────────────┤
+# │keyid │sort alphabetically by key id │
+# ├───────┼──────────────────────────────┤
+# │date │sort by key creation date │
+# ├───────┼──────────────────────────────┤
+# │trust │sort by the trust of the key │
+# └───────┴──────────────────────────────┘
+#
+# If you prefer reverse order of the above values, prefix it with “reverse-”.
+# (PGP only)
+#
+
+
+# 3.205. pgp_strict_enc
+#
+# Type: boolean
+# Default: yes
+#
+# If set, Mutt will automatically encode PGP/MIME signed messages as
+# quoted-printable. Please note that unsetting this variable may lead to problems
+# with non-verifyable PGP signatures, so only change this if you know what you
+# are doing. (PGP only)
+#
+
+
+# 3.206. pgp_timeout
+#
+# Type: number
+# Default: 300
+#
+# The number of seconds after which a cached passphrase will expire if not used.
+# (PGP only)
+#
+
+
+# 3.207. pgp_use_gpg_agent
+#
+# Type: boolean
+# Default: no
+#
+# If set, mutt will use a possibly-running gpg-agent(1) process. Note that as of
+# version 2.1, GnuPG no longer exports GPG_AGENT_INFO, so mutt no longer verifies
+# if the agent is running. (PGP only)
+#
+set pgp_use_gpg_agent=yes
+
+
+# 3.208. pgp_verify_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to verify PGP signatures.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.209. pgp_verify_key_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to verify key information from the key selection menu.
+#
+# This is a format string, see the $pgp_decode_command command for possible
+# printf(3)-like sequences. (PGP only)
+#
+
+
+# 3.210. pipe_decode
+#
+# Type: boolean
+# Default: no
+#
+# Used in connection with the <pipe-message> command. When unset, Mutt will pipe
+# the messages without any preprocessing. When set, Mutt will weed headers and
+# will attempt to decode the messages first.
+#
+
+
+# 3.211. pipe_sep
+#
+# Type: string
+# Default: “n”
+#
+# The separator to add between messages when piping a list of tagged messages to
+# an external Unix command.
+#
+
+
+# 3.212. pipe_split
+#
+# Type: boolean
+# Default: no
+#
+# Used in connection with the <pipe-message> function following <tag-prefix>. If
+# this variable is unset, when piping a list of tagged messages Mutt will
+# concatenate the messages and will pipe them all concatenated. When set, Mutt
+# will pipe the messages one by one. In both cases the messages are piped in the
+# current sorted order, and the $pipe_sep separator is added after each message.
+#
+
+
+# 3.213. pop_auth_try_all
+#
+# Type: boolean
+# Default: yes
+#
+# If set, Mutt will try all available authentication methods. When unset, Mutt
+# will only fall back to other authentication methods if the previous methods are
+# unavailable. If a method is available but authentication fails, Mutt will not
+# connect to the POP server.
+#
+
+
+# 3.214. pop_authenticators
+#
+# Type: string
+# Default: (empty)
+#
+# This is a colon-delimited list of authentication methods mutt may attempt to
+# use to log in to an POP server, in the order mutt should try them.
+# Authentication methods are either “user”, “apop” or any SASL mechanism, e.g. “
+# digest-md5”, “gssapi” or “cram-md5”. This option is case-insensitive. If this
+# option is unset (the default) mutt will try all available methods, in order
+# from most-secure to least-secure.
+#
+# Example:
+#
+# set pop_authenticators="digest-md5:apop:user"
+#
+
+
+# 3.215. pop_checkinterval
+#
+# Type: number
+# Default: 60
+#
+# This variable configures how often (in seconds) mutt should look for new mail
+# in the currently selected mailbox if it is a POP mailbox.
+#
+
+
+# 3.216. pop_delete
+#
+# Type: quadoption
+# Default: ask-no
+#
+# If set, Mutt will delete successfully downloaded messages from the POP server
+# when using the <fetch-mail> function. When unset, Mutt will download messages
+# but also leave them on the POP server.
+#
+
+
+# 3.217. pop_host
+#
+# Type: string
+# Default: (empty)
+#
+# The name of your POP server for the <fetch-mail> function. You can also specify
+# an alternative port, username and password, i.e.:
+#
+# [pop[s]://][username[:password]@]popserver[:port]
+#
+# where “[...]” denotes an optional part.
+#
+
+
+# 3.218. pop_last
+#
+# Type: boolean
+# Default: no
+#
+# If this variable is set, mutt will try to use the “LAST” POP command for
+# retrieving only unread messages from the POP server when using the <fetch-mail>
+# function.
+#
+
+
+# 3.219. pop_oauth_refresh_command
+#
+# Type: string
+# Default: (empty)
+#
+# The command to run to generate an OAUTH refresh token for authorizing your
+# connection to your POP server. This command will be run on every connection
+# attempt that uses the OAUTHBEARER authentication mechanism.
+#
+
+
+# 3.220. pop_pass
+#
+# Type: string
+# Default: (empty)
+#
+# Specifies the password for your POP account. If unset, Mutt will prompt you for
+# your password when you open a POP mailbox.
+#
+# Warning: you should only use this option when you are on a fairly secure
+# machine, because the superuser can read your muttrc even if you are the only
+# one who can read the file.
+#
+
+
+# 3.221. pop_reconnect
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# Controls whether or not Mutt will try to reconnect to the POP server if the
+# connection is lost.
+#
+
+
+# 3.222. pop_user
+#
+# Type: string
+# Default: (empty)
+#
+# Your login name on the POP server.
+#
+# This variable defaults to your user name on the local machine.
+#
+
+
+# 3.223. post_indent_string
+#
+# Type: string
+# Default: (empty)
+#
+# Similar to the $attribution variable, Mutt will append this string after the
+# inclusion of a message which is being replied to.
+#
+
+
+# 3.224. postpone
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# Controls whether or not messages are saved in the $postponed mailbox when you
+# elect not to send immediately.
+#
+# Also see the $recall variable.
+#
+
+
+# 3.225. postponed
+#
+# Type: path
+# Default: “~/postponed”
+#
+# Mutt allows you to indefinitely “postpone sending a message” which you are
+# editing. When you choose to postpone a message, Mutt saves it in the mailbox
+# specified by this variable.
+#
+# Also see the $postpone variable.
+#
+set postponed="=drafts"
+
+
+# 3.226. postpone_encrypt
+#
+# Type: boolean
+# Default: no
+#
+# When set, postponed messages that are marked for encryption will be
+# self-encrypted. Mutt will first try to encrypt using the value specified in
+# $pgp_default_key or $smime_default_key. If those are not set, it will try the
+# deprecated $postpone_encrypt_as. (Crypto only)
+#
+
+
+# 3.227. postpone_encrypt_as
+#
+# Type: string
+# Default: (empty)
+#
+# This is a deprecated fall-back variable for $postpone_encrypt. Please use
+# $pgp_default_key or $smime_default_key. (Crypto only)
+#
+
+
+# 3.228. preconnect
+#
+# Type: string
+# Default: (empty)
+#
+# If set, a shell command to be executed if mutt fails to establish a connection
+# to the server. This is useful for setting up secure connections, e.g. with ssh
+# (1). If the command returns a nonzero status, mutt gives up opening the server.
+# Example:
+#
+# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 < /dev/null > /dev/null"
+#
+# Mailbox “foo” on “mailhost.net” can now be reached as “{localhost:1234}foo”.
+#
+# Note: For this example to work, you must be able to log in to the remote
+# machine without having to enter a password.
+#
+
+
+# 3.229. print
+#
+# Type: quadoption
+# Default: ask-no
+#
+# Controls whether or not Mutt really prints messages. This is set to “ask-no” by
+# default, because some people accidentally hit “p” often.
+#
+
+
+# 3.230. print_command
+#
+# Type: path
+# Default: “lpr”
+#
+# This specifies the command pipe that should be used to print messages.
+#
+set print_command="muttprint"
+
+
+# 3.231. print_decode
+#
+# Type: boolean
+# Default: yes
+#
+# Used in connection with the <print-message> command. If this option is set, the
+# message is decoded before it is passed to the external command specified by
+# $print_command. If this option is unset, no processing will be applied to the
+# message when printing it. The latter setting may be useful if you are using
+# some advanced printer filter which is able to properly format e-mail messages
+# for printing.
+#
+
+
+# 3.232. print_split
+#
+# Type: boolean
+# Default: no
+#
+# Used in connection with the <print-message> command. If this option is set, the
+# command specified by $print_command is executed once for each message which is
+# to be printed. If this option is unset, the command specified by $print_command
+# is executed only once, and all the messages are concatenated, with a form feed
+# as the message separator.
+#
+# Those who use the enscript(1) program's mail-printing mode will most likely
+# want to set this option.
+#
+set print_split=yes
+
+
+# 3.233. prompt_after
+#
+# Type: boolean
+# Default: yes
+#
+# If you use an external $pager, setting this variable will cause Mutt to prompt
+# you for a command when the pager exits rather than returning to the index menu.
+# If unset, Mutt will return to the index menu when the external pager exits.
+#
+
+
+# 3.234. query_command
+#
+# Type: path
+# Default: (empty)
+#
+# This specifies the command Mutt will use to make external address queries. The
+# string may contain a “%s”, which will be substituted with the query string the
+# user types. Mutt will add quotes around the string substituted for “%s”
+# automatically according to shell quoting rules, so you should avoid adding your
+# own. If no “%s” is found in the string, Mutt will append the user's query to
+# the end of the string. See “query” for more information.
+#
+set query_command="lbdbq"
+
+
+# 3.235. query_format
+#
+# Type: string
+# Default: “%4c %t %-25.25a %-25.25n %?e?(%e)?”
+#
+# This variable describes the format of the “query” menu. The following printf(3)
+# -style sequences are understood:
+#
+# ┌───┬─────────────────────────────────────────────────────┐
+# │%a │destination address │
+# ├───┼─────────────────────────────────────────────────────┤
+# │%c │current entry number │
+# ├───┼─────────────────────────────────────────────────────┤
+# │%e │extra information * │
+# ├───┼─────────────────────────────────────────────────────┤
+# │%n │destination name │
+# ├───┼─────────────────────────────────────────────────────┤
+# │%t │“*” if current entry is tagged, a space otherwise │
+# ├───┼─────────────────────────────────────────────────────┤
+# │%>X│right justify the rest of the string and pad with “X”│
+# ├───┼─────────────────────────────────────────────────────┤
+# │%|X│pad to the end of the line with “X” │
+# ├───┼─────────────────────────────────────────────────────┤
+# │%*X│soft-fill with character “X” as pad │
+# └───┴─────────────────────────────────────────────────────┘
+#
+# For an explanation of “soft-fill”, see the $index_format documentation.
+#
+# * = can be optionally printed if nonzero, see the $status_format documentation.
+#
+
+
+# 3.236. quit
+#
+# Type: quadoption
+# Default: yes
+#
+# This variable controls whether “quit” and “exit” actually quit from mutt. If
+# this option is set, they do quit, if it is unset, they have no effect, and if
+# it is set to ask-yes or ask-no, you are prompted for confirmation when you try
+# to quit.
+#
+
+
+# 3.237. quote_regexp
+#
+# Type: regular expression
+# Default: “^([ t]*[|>:}#])+”
+#
+# A regular expression used in the internal pager to determine quoted sections of
+# text in the body of a message. Quoted text may be filtered out using the
+# <toggle-quoted> command, or colored according to the “color quoted” family of
+# directives.
+#
+# Higher levels of quoting may be colored differently (“color quoted1”, “color
+# quoted2”, etc.). The quoting level is determined by removing the last character
+# from the matched text and recursively reapplying the regular expression until
+# it fails to produce a match.
+#
+# Match detection may be overridden by the $smileys regular expression.
+#
+
+
+# 3.238. read_inc
+#
+# Type: number
+# Default: 10
+#
+# If set to a value greater than 0, Mutt will display which message it is
+# currently on when reading a mailbox or when performing search actions such as
+# search and limit. The message is printed after this many messages have been
+# read or searched (e.g., if set to 25, Mutt will print a message when it is at
+# message 25, and then again when it gets to message 50). This variable is meant
+# to indicate progress when reading or searching large mailboxes which may take
+# some time. When set to 0, only a single message will appear before the reading
+# the mailbox.
+#
+# Also see the $write_inc, $net_inc and $time_inc variables and the “tuning”
+# section of the manual for performance considerations.
+#
+
+
+# 3.239. read_only
+#
+# Type: boolean
+# Default: no
+#
+# If set, all folders are opened in read-only mode.
+#
+
+
+# 3.240. realname
+#
+# Type: string
+# Default: (empty)
+#
+# This variable specifies what “real” or “personal” name should be used when
+# sending messages.
+#
+# By default, this is the GECOS field from /etc/passwd. Note that this variable
+# will not be used when the user has set a real name in the $from variable.
+#
+
+
+# 3.241. recall
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# Controls whether or not Mutt recalls postponed messages when composing a new
+# message.
+#
+# Setting this variable to yes is not generally useful, and thus not recommended.
+# Note that the <recall-message> function can be used to manually recall
+# postponed messages.
+#
+# Also see $postponed variable.
+#
+set recall=no
+
+
+# 3.242. record
+#
+# Type: path
+# Default: “~/sent”
+#
+# This specifies the file into which your outgoing messages should be appended.
+# (This is meant as the primary method for saving a copy of your messages, but
+# another way to do this is using the “my_hdr” command to create a “Bcc:” field
+# with your email address in it.)
+#
+# The value of $record is overridden by the $force_name and $save_name variables,
+# and the “fcc-hook” command.
+#
+set record="=store"
+
+
+# 3.243. reflow_space_quotes
+#
+# Type: boolean
+# Default: yes
+#
+# This option controls how quotes from format=flowed messages are displayed in
+# the pager and when replying (with $text_flowed unset). When set, this option
+# adds spaces after each level of quote marks, turning ">>>foo" into "> > > foo".
+#
+# Note: If $reflow_text is unset, this option has no effect. Also, this option
+# does not affect replies when $text_flowed is set.
+#
+
+
+# 3.244. reflow_text
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will reformat paragraphs in text/plain parts marked format=
+# flowed. If unset, Mutt will display paragraphs unaltered from how they appear
+# in the message body. See RFC3676 for details on the format=flowed format.
+#
+# Also see $reflow_wrap, and $wrap.
+#
+
+
+# 3.245. reflow_wrap
+#
+# Type: number
+# Default: 78
+#
+# This variable controls the maximum paragraph width when reformatting text/plain
+# parts when $reflow_text is set. When the value is 0, paragraphs will be wrapped
+# at the terminal's right margin. A positive value sets the paragraph width
+# relative to the left margin. A negative value set the paragraph width relative
+# to the right margin.
+#
+# Also see $wrap.
+#
+
+
+# 3.246. reply_regexp
+#
+# Type: regular expression
+# Default: “^(re([[0-9]+])*|aw):[ t]*”
+#
+# A regular expression used to recognize reply messages when threading and
+# replying. The default value corresponds to the English "Re:" and the German
+# "Aw:".
+#
+set reply_regexp="^((re([-[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+"
+
+
+# 3.247. reply_self
+#
+# Type: boolean
+# Default: no
+#
+# If unset and you are replying to a message sent by you, Mutt will assume that
+# you want to reply to the recipients of that message rather than to yourself.
+#
+# Also see the “alternates” command.
+#
+
+
+# 3.248. reply_to
+#
+# Type: quadoption
+# Default: ask-yes
+#
+# If set, when replying to a message, Mutt will use the address listed in the
+# Reply-to: header as the recipient of the reply. If unset, it will use the
+# address in the From: header field instead. This option is useful for reading a
+# mailing list that sets the Reply-To: header field to the list address and you
+# want to send a private message to the author of a message.
+#
+
+
+# 3.249. resolve
+#
+# Type: boolean
+# Default: yes
+#
+# When set, the cursor will be automatically advanced to the next (possibly
+# undeleted) message whenever a command that modifies the current message is
+# executed.
+#
+
+
+# 3.250. resume_draft_files
+#
+# Type: boolean
+# Default: no
+#
+# If set, draft files (specified by -H on the command line) are processed
+# similarly to when resuming a postponed message. Recipients are not prompted
+# for; send-hooks are not evaluated; no alias expansion takes place; user-defined
+# headers and signatures are not added to the message.
+#
+
+
+# 3.251. resume_edited_draft_files
+#
+# Type: boolean
+# Default: yes
+#
+# If set, draft files previously edited (via -E -H on the command line) will have
+# $resume_draft_files automatically set when they are used as a draft file again.
+#
+# The first time a draft file is saved, mutt will add a header,
+# X-Mutt-Resume-Draft to the saved file. The next time the draft file is read in,
+# if mutt sees the header, it will set $resume_draft_files.
+#
+# This option is designed to prevent multiple signatures, user-defined headers,
+# and other processing effects from being made multiple times to the draft file.
+#
+
+
+# 3.252. reverse_alias
+#
+# Type: boolean
+# Default: no
+#
+# This variable controls whether or not Mutt will display the “personal” name
+# from your aliases in the index menu if it finds an alias that matches the
+# message's sender. For example, if you have the following alias:
+#
+# alias juser abd30425@somewhere.net (Joe User)
+#
+# and then you receive mail which contains the following header:
+#
+# From: abd30425@somewhere.net
+#
+# It would be displayed in the index menu as “Joe User” instead of “
+# abd30425@somewhere.net.” This is useful when the person's e-mail address is not
+# human friendly.
+#
+
+
+# 3.253. reverse_name
+#
+# Type: boolean
+# Default: no
+#
+# It may sometimes arrive that you receive mail to a certain machine, move the
+# messages to another machine, and reply to some the messages from there. If this
+# variable is set, the default From: line of the reply messages is built using
+# the address where you received the messages you are replying to if that address
+# matches your “alternates”. If the variable is unset, or the address that would
+# be used doesn't match your “alternates”, the From: line will use your address
+# on the current machine.
+#
+# Also see the “alternates” command.
+#
+set reverse_name=yes
+
+
+# 3.254. reverse_realname
+#
+# Type: boolean
+# Default: yes
+#
+# This variable fine-tunes the behavior of the $reverse_name feature. When it is
+# set, mutt will use the address from incoming messages as-is, possibly including
+# eventual real names. When it is unset, mutt will override any such real names
+# with the setting of the $realname variable.
+#
+
+
+# 3.255. rfc2047_parameters
+#
+# Type: boolean
+# Default: no
+#
+# When this variable is set, Mutt will decode RFC2047-encoded MIME parameters.
+# You want to set this variable when mutt suggests you to save attachments to
+# files named like:
+#
+# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
+#
+# When this variable is set interactively, the change won't be active until you
+# change folders.
+#
+# Note that this use of RFC2047's encoding is explicitly prohibited by the
+# standard, but nevertheless encountered in the wild.
+#
+# Also note that setting this parameter will not have the effect that mutt
+# generates this kind of encoding. Instead, mutt will unconditionally use the
+# encoding specified in RFC2231.
+#
+set rfc2047_parameters=yes
+
+
+# 3.256. save_address
+#
+# Type: boolean
+# Default: no
+#
+# If set, mutt will take the sender's full address when choosing a default folder
+# for saving a mail. If $save_name or $force_name is set too, the selection of
+# the Fcc folder will be changed as well.
+#
+
+
+# 3.257. save_empty
+#
+# Type: boolean
+# Default: yes
+#
+# When unset, mailboxes which contain no saved messages will be removed when
+# closed (the exception is $spoolfile which is never removed). If set, mailboxes
+# are never removed.
+#
+# Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and
+# Maildir directories.
+#
+
+
+# 3.258. save_history
+#
+# Type: number
+# Default: 0
+#
+# This variable controls the size of the history (per category) saved in the
+# $history_file file.
+#
+set save_history=100
+
+
+# 3.259. save_name
+#
+# Type: boolean
+# Default: no
+#
+# This variable controls how copies of outgoing messages are saved. When set, a
+# check is made to see if a mailbox specified by the recipient address exists
+# (this is done by searching for a mailbox in the $folder directory with the
+# username part of the recipient address). If the mailbox exists, the outgoing
+# message will be saved to that mailbox, otherwise the message is saved to the
+# $record mailbox.
+#
+# Also see the $force_name variable.
+#
+
+
+# 3.260. score
+#
+# Type: boolean
+# Default: yes
+#
+# When this variable is unset, scoring is turned off. This can be useful to
+# selectively disable scoring for certain folders when the
+# $score_threshold_delete variable and related are used.
+#
+
+
+# 3.261. score_threshold_delete
+#
+# Type: number
+# Default: -1
+#
+# Messages which have been assigned a score equal to or lower than the value of
+# this variable are automatically marked for deletion by mutt. Since mutt scores
+# are always greater than or equal to zero, the default setting of this variable
+# will never mark a message for deletion.
+#
+
+
+# 3.262. score_threshold_flag
+#
+# Type: number
+# Default: 9999
+#
+# Messages which have been assigned a score greater than or equal to this
+# variable's value are automatically marked "flagged".
+#
+
+
+# 3.263. score_threshold_read
+#
+# Type: number
+# Default: -1
+#
+# Messages which have been assigned a score equal to or lower than the value of
+# this variable are automatically marked as read by mutt. Since mutt scores are
+# always greater than or equal to zero, the default setting of this variable will
+# never mark a message read.
+#
+
+
+# 3.264. search_context
+#
+# Type: number
+# Default: 0
+#
+# For the pager, this variable specifies the number of lines shown before search
+# results. By default, search results will be top-aligned.
+#
+set search_context=5
+
+
+# 3.265. send_charset
+#
+# Type: string
+# Default: “us-ascii:iso-8859-1:utf-8”
+#
+# A colon-delimited list of character sets for outgoing messages. Mutt will use
+# the first character set into which the text can be converted exactly. If your
+# $charset is not “iso-8859-1” and recipients may not understand “UTF-8”, it is
+# advisable to include in the list an appropriate widely used standard character
+# set (such as “iso-8859-2”, “koi8-r” or “iso-2022-jp”) either instead of or
+# after “iso-8859-1”.
+#
+# In case the text cannot be converted into one of these exactly, mutt uses
+# $charset as a fallback.
+#
+
+
+# 3.266. sendmail
+#
+# Type: path
+# Default: “/usr/sbin/sendmail -oem -oi”
+#
+# Specifies the program and arguments used to deliver mail sent by Mutt. Mutt
+# expects that the specified program interprets additional arguments as recipient
+# addresses. Mutt appends all recipients after adding a -- delimiter (if not
+# already present). Additional flags, such as for $use_8bitmime,
+# $use_envelope_from, $dsn_notify, or $dsn_return will be added before the
+# delimiter.
+#
+set sendmail="$my_confdir/sendmail"
+
+
+# 3.267. sendmail_wait
+#
+# Type: number
+# Default: 0
+#
+# Specifies the number of seconds to wait for the $sendmail process to finish
+# before giving up and putting delivery in the background.
+#
+# Mutt interprets the value of this variable as follows:
+#
+# ┌──┬──────────────────────────────────────────────────────────────────┐
+# │>0│number of seconds to wait for sendmail to finish before continuing│
+# ├──┼──────────────────────────────────────────────────────────────────┤
+# │0 │wait forever for sendmail to finish │
+# ├──┼──────────────────────────────────────────────────────────────────┤
+# │<0│always put sendmail in the background without waiting │
+# └──┴──────────────────────────────────────────────────────────────────┘
+#
+# Note that if you specify a value other than 0, the output of the child process
+# will be put in a temporary file. If there is some error, you will be informed
+# as to where to find the output.
+#
+
+
+# 3.268. shell
+#
+# Type: path
+# Default: (empty)
+#
+# Command to use when spawning a subshell. By default, the user's login shell
+# from /etc/passwd is used.
+#
+
+
+# 3.269. sidebar_delim_chars
+#
+# Type: string
+# Default: “/.”
+#
+# This contains the list of characters which you would like to treat as folder
+# separators for displaying paths in the sidebar.
+#
+# Local mail is often arranged in directories: `dir1/dir2/mailbox'.
+#
+# set sidebar_delim_chars='/'
+#
+# IMAP mailboxes are often named: `folder1.folder2.mailbox'.
+#
+# set sidebar_delim_chars='.'
+#
+# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.
+#
+
+
+# 3.270. sidebar_divider_char
+#
+# Type: string
+# Default: “|”
+#
+# This specifies the characters to be drawn between the sidebar (when visible)
+# and the other Mutt panels. ASCII and Unicode line-drawing characters are
+# supported.
+#
+set sidebar_divider_char=" "
+
+
+# 3.271. sidebar_folder_indent
+#
+# Type: boolean
+# Default: no
+#
+# Set this to indent mailboxes in the sidebar.
+#
+# See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.
+#
+set sidebar_folder_indent=yes
+
+
+# 3.272. sidebar_format
+#
+# Type: string
+# Default: “%B%* %n”
+#
+# This variable allows you to customize the sidebar display. This string is
+# similar to $index_format, but has its own set of printf(3)-like sequences:
+#
+# ┌───┬─────────────────────────────────────────────────────────────────────────┐
+# │%B │Name of the mailbox │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%S │* Size of mailbox (total number of messages) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%N │* Number of unread messages in the mailbox │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%n │N if mailbox has new mail, blank otherwise │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%F │* Number of Flagged messages in the mailbox │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%! │“!” : one flagged message; “!!” : two flagged messages; “n!” : n flagged │
+# │ │messages (for n > 2). Otherwise prints nothing. │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%d │* @ Number of deleted messages │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%L │* @ Number of messages after limiting │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%t │* @ Number of tagged messages │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%>X│right justify the rest of the string and pad with “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%|X│pad to the end of the line with “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%*X│soft-fill with character “X” as pad │
+# └───┴─────────────────────────────────────────────────────────────────────────┘
+#
+# * = Can be optionally printed if nonzero @ = Only applicable to the current
+# folder
+#
+# In order to use %S, %N, %F, and %!, $mail_check_stats must be set. When thus
+# set, a suggested value for this option is "%B%?F? [%F]?%* %?N?%N/?%S".
+#
+set sidebar_format="%B%?F? [%F]?%* %?N?%N/?%S"
+
+
+# 3.273. sidebar_indent_string
+#
+# Type: string
+# Default: “ ”
+#
+# This specifies the string that is used to indent mailboxes in the sidebar. It
+# defaults to two spaces.
+#
+# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.
+#
+set sidebar_indent_string=" "
+
+
+# 3.274. sidebar_new_mail_only
+#
+# Type: boolean
+# Default: no
+#
+# When set, the sidebar will only display mailboxes containing new, or flagged,
+# mail.
+#
+# See also: sidebar_whitelist.
+#
+
+
+# 3.275. sidebar_next_new_wrap
+#
+# Type: boolean
+# Default: no
+#
+# When set, the <sidebar-next-new> command will not stop and the end of the list
+# of mailboxes, but wrap around to the beginning. The <sidebar-prev-new> command
+# is similarly affected, wrapping around to the end of the list.
+#
+
+
+# 3.276. sidebar_short_path
+#
+# Type: boolean
+# Default: no
+#
+# By default the sidebar will show the mailbox's path, relative to the $folder
+# variable. Setting sidebar_shortpath=yes will shorten the names relative to the
+# previous name. Here's an example:
+#
+# ┌────────────┬─────────────┬───────────────────────────────────────────────┐
+# │shortpath=no│shortpath=yes│shortpath=yes, folderindent=yes, indentstr=".."│
+# ├────────────┼─────────────┼───────────────────────────────────────────────┤
+# │fruit │fruit │fruit │
+# ├────────────┼─────────────┼───────────────────────────────────────────────┤
+# │fruit.apple │apple │..apple │
+# ├────────────┼─────────────┼───────────────────────────────────────────────┤
+# │fruit.banana│banana │..banana │
+# ├────────────┼─────────────┼───────────────────────────────────────────────┤
+# │fruit.cherry│cherry │..cherry │
+# └────────────┴─────────────┴───────────────────────────────────────────────┘
+#
+# See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string.
+#
+set sidebar_short_path=yes
+
+
+# 3.277. sidebar_sort_method
+#
+# Type: sort order
+# Default: order
+#
+# Specifies how to sort entries in the file browser. By default, the entries are
+# sorted alphabetically. Valid values:
+#
+# • alpha (alphabetically)
+#
+# • count (all message count)
+#
+# • flagged (flagged message count)
+#
+# • name (alphabetically)
+#
+# • new (unread message count)
+#
+# • path (alphabetically)
+#
+# • unread (unread message count)
+#
+# • unsorted
+#
+# You may optionally use the “reverse-” prefix to specify reverse sorting order
+# (example: “set sort_browser=reverse-date”).
+#
+
+
+# 3.278. sidebar_visible
+#
+# Type: boolean
+# Default: no
+#
+# This specifies whether or not to show sidebar. The sidebar shows a list of all
+# your mailboxes.
+#
+# See also: $sidebar_format, $sidebar_width
+#
+set sidebar_visible=no
+
+
+# 3.279. sidebar_width
+#
+# Type: number
+# Default: 30
+#
+# This controls the width of the sidebar. It is measured in screen columns. For
+# example: sidebar_width=20 could display 20 ASCII characters, or 10 Chinese
+# characters.
+#
+set sidebar_width=20
+
+
+# 3.280. sig_dashes
+#
+# Type: boolean
+# Default: yes
+#
+# If set, a line containing “-- ” (note the trailing space) will be inserted
+# before your $signature. It is strongly recommended that you not unset this
+# variable unless your signature contains just your name. The reason for this is
+# because many software packages use “-- n” to detect your signature. For
+# example, Mutt has the ability to highlight the signature in a different color
+# in the built-in pager.
+#
+set sig_dashes=no
+
+
+# 3.281. sig_on_top
+#
+# Type: boolean
+# Default: no
+#
+# If set, the signature will be included before any quoted or forwarded text. It
+# is strongly recommended that you do not set this variable unless you really
+# know what you are doing, and are prepared to take some heat from netiquette
+# guardians.
+#
+
+
+# 3.282. signature
+#
+# Type: path
+# Default: “~/.signature”
+#
+# Specifies the filename of your signature, which is appended to all outgoing
+# messages. If the filename ends with a pipe (“|”), it is assumed that filename
+# is a shell command and input should be read from its standard output.
+#
+
+
+# 3.283. simple_search
+#
+# Type: string
+# Default: “~f %s | ~s %s”
+#
+# Specifies how Mutt should expand a simple search into a real search pattern. A
+# simple search is one that does not contain any of the “~” pattern operators.
+# See “patterns” for more information on search patterns.
+#
+# For example, if you simply type “joe” at a search or limit prompt, Mutt will
+# automatically expand it to the value specified by this variable by replacing “
+# %s” with the supplied string. For the default value, “joe” would be expanded
+# to: “~f joe | ~s joe”.
+#
+set simple_search="~L %s | ~s %s"
+
+
+# 3.284. sleep_time
+#
+# Type: number
+# Default: 1
+#
+# Specifies time, in seconds, to pause while displaying certain informational
+# messages, while moving from folder to folder and after expunging messages from
+# the current folder. The default is to pause one second, so a value of zero for
+# this option suppresses the pause.
+#
+
+
+# 3.285. smart_wrap
+#
+# Type: boolean
+# Default: yes
+#
+# Controls the display of lines longer than the screen width in the internal
+# pager. If set, long lines are wrapped at a word boundary. If unset, lines are
+# simply wrapped at the screen edge. Also see the $markers variable.
+#
+
+
+# 3.286. smileys
+#
+# Type: regular expression
+# Default: “(>From )|(:[-^]?[][)(><}{|/DP])”
+#
+# The pager uses this variable to catch some common false positives of
+# $quote_regexp, most notably smileys and not consider a line quoted text if it
+# also matches $smileys. This mostly happens at the beginning of a line.
+#
+
+
+# 3.287. smime_ask_cert_label
+#
+# Type: boolean
+# Default: yes
+#
+# This flag controls whether you want to be asked to enter a label for a
+# certificate about to be added to the database or not. It is set by default. (S/
+# MIME only)
+#
+
+
+# 3.288. smime_ca_location
+#
+# Type: path
+# Default: (empty)
+#
+# This variable contains the name of either a directory, or a file which contains
+# trusted certificates for use with OpenSSL. (S/MIME only)
+#
+
+
+# 3.289. smime_certificates
+#
+# Type: path
+# Default: (empty)
+#
+# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+# storage and retrieval of keys by itself. This is very basic right now, and keys
+# and certificates are stored in two different directories, both named as the
+# hash-value retrieved from OpenSSL. There is an index file which contains
+# mailbox-address keyid pairs, and which can be manually edited. This option
+# points to the location of the certificates. (S/MIME only)
+#
+set smime_certificates="~/.smime/certificates"
+
+
+# 3.290. smime_decrypt_command
+#
+# Type: string
+# Default: (empty)
+#
+# This format string specifies a command which is used to decrypt application/
+# x-pkcs7-mime attachments.
+#
+# The OpenSSL command formats have their own set of printf(3)-like sequences
+# similar to PGP's:
+#
+# ┌──┬──────────────────────────────────────────────────────────────────────────┐
+# │%f│Expands to the name of a file containing a message. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%s│Expands to the name of a file containing the signature part of a multipart│
+# │ │/signed attachment when verifying it. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%k│The key-pair specified with $smime_default_key │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%c│One or more certificate IDs. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%a│The algorithm used for encryption. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │%d│The message digest algorithm specified with $smime_sign_digest_alg. │
+# ├──┼──────────────────────────────────────────────────────────────────────────┤
+# │ │CA location: Depending on whether $smime_ca_location points to a directory│
+# │%C│or file, this expands to “-CApath $smime_ca_location” or “-CAfile │
+# │ │$smime_ca_location”. │
+# └──┴──────────────────────────────────────────────────────────────────────────┘
+#
+# For examples on how to configure these formats, see the smime.rc in the samples
+# / subdirectory which has been installed on your system alongside the
+# documentation. (S/MIME only)
+#
+
+
+# 3.291. smime_decrypt_use_default_key
+#
+# Type: boolean
+# Default: yes
+#
+# If set (default) this tells mutt to use the default key for decryption.
+# Otherwise, if managing multiple certificate-key-pairs, mutt will try to use the
+# mailbox-address to determine the key to use. It will ask you to supply a key,
+# if it can't find one. (S/MIME only)
+#
+
+
+# 3.292. smime_default_key
+#
+# Type: string
+# Default: (empty)
+#
+# This is the default key-pair to use for S/MIME operations, and must be set to
+# the keyid (the hash-value that OpenSSL generates) to work properly.
+#
+# It will be used for encryption (see $postpone_encrypt and $smime_self_encrypt).
+#
+# It will be used for decryption unless $smime_decrypt_use_default_key is unset.
+#
+# It will also be used for signing unless $smime_sign_as is set.
+#
+# The (now deprecated) smime_self_encrypt_as is an alias for this variable, and
+# should no longer be used. (S/MIME only)
+#
+
+
+# 3.293. smime_encrypt_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to create encrypted S/MIME messages.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.294. smime_encrypt_with
+#
+# Type: string
+# Default: “aes256”
+#
+# This sets the algorithm that should be used for encryption. Valid choices are “
+# aes128”, “aes192”, “aes256”, “des”, “des3”, “rc2-40”, “rc2-64”, “rc2-128”. (S/
+# MIME only)
+#
+
+
+# 3.295. smime_get_cert_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to extract X509 certificates from a PKCS7 structure.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.296. smime_get_cert_email_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to extract the mail address(es) used for storing X509
+# certificates, and for verification purposes (to check whether the certificate
+# was issued for the sender's mailbox).
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.297. smime_get_signer_cert_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to extract only the signers X509 certificate from a S/MIME
+# signature, so that the certificate's owner may get compared to the email's “
+# From:” field.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.298. smime_import_cert_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to import a certificate via smime_keys.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.299. smime_is_default
+#
+# Type: boolean
+# Default: no
+#
+# The default behavior of mutt is to use PGP on all auto-sign/encryption
+# operations. To override and to use OpenSSL instead this must be set. However,
+# this has no effect while replying, since mutt will automatically select the
+# same application that was used to sign/encrypt the original message. (Note that
+# this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only)
+#
+
+
+# 3.300. smime_keys
+#
+# Type: path
+# Default: (empty)
+#
+# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
+# storage and retrieval of keys/certs by itself. This is very basic right now,
+# and stores keys and certificates in two different directories, both named as
+# the hash-value retrieved from OpenSSL. There is an index file which contains
+# mailbox-address keyid pair, and which can be manually edited. This option
+# points to the location of the private keys. (S/MIME only)
+#
+set smime_keys="~/.smime/keys"
+
+
+# 3.301. smime_pk7out_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to extract PKCS7 structures of S/MIME signatures, in order
+# to extract the public X509 certificate(s).
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.302. smime_self_encrypt
+#
+# Type: boolean
+# Default: yes
+#
+# When set, S/MIME encrypted messages will also be encrypted using the
+# certificate in $smime_default_key. (S/MIME only)
+#
+
+
+# 3.303. smime_sign_as
+#
+# Type: string
+# Default: (empty)
+#
+# If you have a separate key to use for signing, you should set this to the
+# signing key. Most people will only need to set $smime_default_key. (S/MIME
+# only)
+#
+
+
+# 3.304. smime_sign_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to created S/MIME signatures of type multipart/signed,
+# which can be read by all mail clients.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. NOTE: %c and %k will default to $smime_sign_as if
+# set, otherwise $smime_default_key. (S/MIME only)
+#
+
+
+# 3.305. smime_sign_digest_alg
+#
+# Type: string
+# Default: “sha256”
+#
+# This sets the algorithm that should be used for the signature message digest.
+# Valid choices are “md5”, “sha1”, “sha224”, “sha256”, “sha384”, “sha512”. (S/
+# MIME only)
+#
+
+
+# 3.306. smime_sign_opaque_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to created S/MIME signatures of type application/
+# x-pkcs7-signature, which can only be handled by mail clients supporting the S/
+# MIME extension.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.307. smime_timeout
+#
+# Type: number
+# Default: 300
+#
+# The number of seconds after which a cached passphrase will expire if not used.
+# (S/MIME only)
+#
+
+
+# 3.308. smime_verify_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to verify S/MIME signatures of type multipart/signed.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.309. smime_verify_opaque_command
+#
+# Type: string
+# Default: (empty)
+#
+# This command is used to verify S/MIME signatures of type application/
+# x-pkcs7-mime.
+#
+# This is a format string, see the $smime_decrypt_command command for possible
+# printf(3)-like sequences. (S/MIME only)
+#
+
+
+# 3.310. smtp_authenticators
+#
+# Type: string
+# Default: (empty)
+#
+# This is a colon-delimited list of authentication methods mutt may attempt to
+# use to log in to an SMTP server, in the order mutt should try them.
+# Authentication methods are any SASL mechanism, e.g. “digest-md5”, “gssapi” or “
+# cram-md5”. This option is case-insensitive. If it is “unset” (the default) mutt
+# will try all available methods, in order from most-secure to least-secure.
+#
+# Example:
+#
+# set smtp_authenticators="digest-md5:cram-md5"
+#
+
+
+# 3.311. smtp_oauth_refresh_command
+#
+# Type: string
+# Default: (empty)
+#
+# The command to run to generate an OAUTH refresh token for authorizing your
+# connection to your SMTP server. This command will be run on every connection
+# attempt that uses the OAUTHBEARER authentication mechanism.
+#
+
+
+# 3.312. smtp_pass
+#
+# Type: string
+# Default: (empty)
+#
+# Specifies the password for your SMTP account. If unset, Mutt will prompt you
+# for your password when you first send mail via SMTP. See $smtp_url to configure
+# mutt to send mail via SMTP.
+#
+# Warning: you should only use this option when you are on a fairly secure
+# machine, because the superuser can read your muttrc even if you are the only
+# one who can read the file.
+#
+
+
+# 3.313. smtp_url
+#
+# Type: string
+# Default: (empty)
+#
+# Defines the SMTP smarthost where sent messages should relayed for delivery.
+# This should take the form of an SMTP URL, e.g.:
+#
+# smtp[s]://[user[:pass]@]host[:port]
+#
+# where “[...]” denotes an optional part. Setting this variable overrides the
+# value of the $sendmail variable.
+#
+
+
+# 3.314. sort
+#
+# Type: sort order
+# Default: date
+#
+# Specifies how to sort messages in the “index” menu. Valid values are:
+#
+# • date or date-sent
+#
+# • date-received
+#
+# • from
+#
+# • mailbox-order (unsorted)
+#
+# • score
+#
+# • size
+#
+# • spam
+#
+# • subject
+#
+# • threads
+#
+# • to
+#
+# You may optionally use the “reverse-” prefix to specify reverse sorting order
+# (example: “set sort=reverse-date-sent”).
+#
+set sort=threads
+
+
+# 3.315. sort_alias
+#
+# Type: sort order
+# Default: alias
+#
+# Specifies how the entries in the “alias” menu are sorted. The following are
+# legal values:
+#
+# • address (sort alphabetically by email address)
+#
+# • alias (sort alphabetically by alias name)
+#
+# • unsorted (leave in order specified in .muttrc)
+#
+
+
+# 3.316. sort_aux
+#
+# Type: sort order
+# Default: date
+#
+# When sorting by threads, this variable controls how threads are sorted in
+# relation to other threads, and how the branches of the thread trees are sorted.
+# This can be set to any value that $sort can, except “threads” (in that case,
+# mutt will just use “date-sent”). You can also specify the “last-” prefix in
+# addition to the “reverse-” prefix, but “last-” must come after “reverse-”. The
+# “last-” prefix causes messages to be sorted against its siblings by which has
+# the last descendant, using the rest of $sort_aux as an ordering. For instance,
+#
+# set sort_aux=last-date-received
+#
+# would mean that if a new message is received in a thread, that thread becomes
+# the last one displayed (or the first, if you have “set sort=reverse-threads”.)
+#
+# Note: For reversed $sort order $sort_aux is reversed again (which is not the
+# right thing to do, but kept to not break any existing configuration setting).
+#
+set sort_aux=last-date-received
+
+
+# 3.317. sort_browser
+#
+# Type: sort order
+# Default: alpha
+#
+# Specifies how to sort entries in the file browser. By default, the entries are
+# sorted alphabetically. Valid values:
+#
+# • alpha (alphabetically)
+#
+# • count
+#
+# • date
+#
+# • size
+#
+# • unread
+#
+# • unsorted
+#
+# You may optionally use the “reverse-” prefix to specify reverse sorting order
+# (example: “set sort_browser=reverse-date”).
+#
+
+
+# 3.318. sort_re
+#
+# Type: boolean
+# Default: yes
+#
+# This variable is only useful when sorting by threads with $strict_threads unset
+# . In that case, it changes the heuristic mutt uses to thread messages by
+# subject. With $sort_re set, mutt will only attach a message as the child of
+# another message by subject if the subject of the child message starts with a
+# substring matching the setting of $reply_regexp. With $sort_re unset, mutt will
+# attach the message whether or not this is the case, as long as the non-
+# $reply_regexp parts of both messages are identical.
+#
+
+
+# 3.319. spam_separator
+#
+# Type: string
+# Default: “,”
+#
+# This variable controls what happens when multiple spam headers are matched: if
+# unset, each successive header will overwrite any previous matches value for the
+# spam label. If set, each successive match will append to the previous, using
+# this variable's value as a separator.
+#
+
+
+# 3.320. spoolfile
+#
+# Type: path
+# Default: (empty)
+#
+# If your spool mailbox is in a non-default place where Mutt cannot find it, you
+# can specify its location with this variable. Mutt will initially set this
+# variable to the value of the environment variable $MAIL or $MAILDIR if either
+# is defined.
+#
+set spoolfile="=inbox"
+
+
+# 3.321. ssl_ca_certificates_file
+#
+# Type: path
+# Default: (empty)
+#
+# This variable specifies a file containing trusted CA certificates. Any server
+# certificate that is signed with one of these CA certificates is also
+# automatically accepted. (GnuTLS only)
+#
+# Example:
+#
+# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
+#
+set ssl_ca_certificates_file="/etc/ssl/certs/ca-certificates.crt"
+
+
+# 3.322. ssl_client_cert
+#
+# Type: path
+# Default: (empty)
+#
+# The file containing a client certificate and its associated private key.
+#
+
+
+# 3.323. ssl_force_tls
+#
+# Type: boolean
+# Default: no
+#
+# If this variable is set, Mutt will require that all connections to remote
+# servers be encrypted. Furthermore it will attempt to negotiate TLS even if the
+# server does not advertise the capability, since it would otherwise have to
+# abort the connection anyway. This option supersedes $ssl_starttls.
+#
+
+
+# 3.324. ssl_min_dh_prime_bits
+#
+# Type: number
+# Default: 0
+#
+# This variable specifies the minimum acceptable prime size (in bits) for use in
+# any Diffie-Hellman key exchange. A value of 0 will use the default from the
+# GNUTLS library. (GnuTLS only)
+#
+
+
+# 3.325. ssl_starttls
+#
+# Type: quadoption
+# Default: yes
+#
+# If set (the default), mutt will attempt to use STARTTLS on servers advertising
+# the capability. When unset, mutt will not attempt to use STARTTLS regardless of
+# the server's capabilities.
+#
+
+
+# 3.326. ssl_use_sslv2
+#
+# Type: boolean
+# Default: no
+#
+# This variable specifies whether to attempt to use SSLv2 in the SSL
+# authentication process. Note that SSLv2 and SSLv3 are now considered
+# fundamentally insecure and are no longer recommended. (OpenSSL only)
+#
+
+
+# 3.327. ssl_use_sslv3
+#
+# Type: boolean
+# Default: no
+#
+# This variable specifies whether to attempt to use SSLv3 in the SSL
+# authentication process. Note that SSLv2 and SSLv3 are now considered
+# fundamentally insecure and are no longer recommended.
+#
+
+
+# 3.328. ssl_use_tlsv1
+#
+# Type: boolean
+# Default: yes
+#
+# This variable specifies whether to attempt to use TLSv1.0 in the SSL
+# authentication process.
+#
+
+
+# 3.329. ssl_use_tlsv1_1
+#
+# Type: boolean
+# Default: yes
+#
+# This variable specifies whether to attempt to use TLSv1.1 in the SSL
+# authentication process.
+#
+
+
+# 3.330. ssl_use_tlsv1_2
+#
+# Type: boolean
+# Default: yes
+#
+# This variable specifies whether to attempt to use TLSv1.2 in the SSL
+# authentication process.
+#
+
+
+# 3.331. ssl_usesystemcerts
+#
+# Type: boolean
+# Default: yes
+#
+# If set to yes, mutt will use CA certificates in the system-wide certificate
+# store when checking if a server certificate is signed by a trusted CA. (OpenSSL
+# only)
+#
+
+
+# 3.332. ssl_verify_dates
+#
+# Type: boolean
+# Default: yes
+#
+# If set (the default), mutt will not automatically accept a server certificate
+# that is either not yet valid or already expired. You should only unset this for
+# particular known hosts, using the <account-hook> function.
+#
+
+
+# 3.333. ssl_verify_host
+#
+# Type: boolean
+# Default: yes
+#
+# If set (the default), mutt will not automatically accept a server certificate
+# whose host name does not match the host used in your folder URL. You should
+# only unset this for particular known hosts, using the <account-hook> function.
+#
+
+
+# 3.334. ssl_verify_partial_chains
+#
+# Type: boolean
+# Default: no
+#
+# This option should not be changed from the default unless you understand what
+# you are doing.
+#
+# Setting this variable to yes will permit verifying partial certification
+# chains, i. e. a certificate chain where not the root, but an intermediate
+# certificate CA, or the host certificate, are marked trusted (in
+# $certificate_file), without marking the root signing CA as trusted.
+#
+# (OpenSSL 1.0.2b and newer only).
+#
+
+
+# 3.335. ssl_ciphers
+#
+# Type: string
+# Default: (empty)
+#
+# Contains a colon-seperated list of ciphers to use when using SSL. For OpenSSL,
+# see ciphers(1) for the syntax of the string.
+#
+# For GnuTLS, this option will be used in place of "NORMAL" at the start of the
+# priority string. See gnutls_priority_init(3) for the syntax and more details.
+# (Note: GnuTLS version 2.1.7 or higher is required.)
+#
+
+
+# 3.336. status_chars
+#
+# Type: string
+# Default: “-*%A”
+#
+# Controls the characters used by the “%r” indicator in $status_format. The first
+# character is used when the mailbox is unchanged. The second is used when the
+# mailbox has been changed, and it needs to be resynchronized. The third is used
+# if the mailbox is in read-only mode, or if the mailbox will not be written when
+# exiting that mailbox (You can toggle whether to write changes to a mailbox with
+# the <toggle-write> operation, bound by default to “%”). The fourth is used to
+# indicate that the current folder has been opened in attach- message mode
+# (Certain operations like composing a new mail, replying, forwarding, etc. are
+# not permitted in this mode).
+#
+
+
+# 3.337. status_format
+#
+# Type: string
+# Default: “-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F?
+# Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---”
+#
+# Controls the format of the status line displayed in the “index” menu. This
+# string is similar to $index_format, but has its own set of printf(3)-like
+# sequences:
+#
+# ┌───┬─────────────────────────────────────────────────────────────────────────┐
+# │%b │number of mailboxes with new mail * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%d │number of deleted messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%f │the full pathname of the current mailbox │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%F │number of flagged messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%h │local hostname │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%l │size (in bytes) of the current mailbox * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%L │size (in bytes) of the messages shown (i.e., which match the current │
+# │ │limit) * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%m │the number of messages in the mailbox * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%M │the number of messages shown (i.e., which match the current limit) * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%n │number of new messages in the mailbox * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%o │number of old unread messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%p │number of postponed messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%P │percentage of the way through the index │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%r │modified/read-only/won't-write/attach-message indicator, according to │
+# │ │$status_chars │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%R │number of read messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%s │current sorting mode ($sort) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%S │current aux sorting method ($sort_aux) │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%t │number of tagged messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%u │number of unread messages * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%v │Mutt version string │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%V │currently active limit pattern, if any * │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%>X│right justify the rest of the string and pad with “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%|X│pad to the end of the line with “X” │
+# ├───┼─────────────────────────────────────────────────────────────────────────┤
+# │%*X│soft-fill with character “X” as pad │
+# └───┴─────────────────────────────────────────────────────────────────────────┘
+#
+# For an explanation of “soft-fill”, see the $index_format documentation.
+#
+# * = can be optionally printed if nonzero
+#
+# Some of the above sequences can be used to optionally print a string if their
+# value is nonzero. For example, you may only want to see the number of flagged
+# messages if such messages exist, since zero is not particularly meaningful. To
+# optionally print a string based upon one of the above sequences, the following
+# construct is used:
+#
+# %?<sequence_char>?<optional_string>?
+#
+# where sequence_char is a character from the table above, and optional_string is
+# the string you would like printed if sequence_char is nonzero. optional_string
+# may contain other sequences as well as normal text, but you may not nest
+# optional strings.
+#
+# Here is an example illustrating how to optionally print the number of new
+# messages in a mailbox:
+#
+# %?n?%n new messages.?
+#
+# You can also switch between two strings using the following construct:
+#
+# %?<sequence_char>?<if_string>&<else_string>?
+#
+# If the value of sequence_char is non-zero, if_string will be expanded,
+# otherwise else_string will be expanded.
+#
+# You can force the result of any printf(3)-like sequence to be lowercase by
+# prefixing the sequence character with an underscore (“_”) sign. For example, if
+# you want to display the local hostname in lowercase, you would use: “%_h”.
+#
+# If you prefix the sequence character with a colon (“:”) character, mutt will
+# replace any dots in the expansion by underscores. This might be helpful with
+# IMAP folders that don't like dots in folder names.
+#
+set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) "
+
+
+# 3.338. status_on_top
+#
+# Type: boolean
+# Default: no
+#
+# Setting this variable causes the “status bar” to be displayed on the first line
+# of the screen rather than near the bottom. If $help is set, too it'll be placed
+# at the bottom.
+#
+
+
+# 3.339. strict_threads
+#
+# Type: boolean
+# Default: no
+#
+# If set, threading will only make use of the “In-Reply-To” and “References:”
+# fields when you $sort by message threads. By default, messages with the same
+# subject are grouped together in “pseudo threads.”. This may not always be
+# desirable, such as in a personal mailbox where you might have several unrelated
+# messages with the subjects like “hi” which will get grouped together. See also
+# $sort_re for a less drastic way of controlling this behavior.
+#
+set strict_threads=yes
+
+
+# 3.340. suspend
+#
+# Type: boolean
+# Default: yes
+#
+# When unset, mutt won't stop when the user presses the terminal's susp key,
+# usually “^Z”. This is useful if you run mutt inside an xterm using a command
+# like “xterm -e mutt”.
+#
+
+
+# 3.341. text_flowed
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will generate “format=flowed” bodies with a content type of “
+# text/plain; format=flowed”. This format is easier to handle for some mailing
+# software, and generally just looks like ordinary text. To actually make use of
+# this format's features, you'll need support in your editor.
+#
+# Note that $indent_string is ignored when this option is set.
+#
+set text_flowed=yes
+
+
+# 3.342. thorough_search
+#
+# Type: boolean
+# Default: yes
+#
+# Affects the ~b and ~h search operations described in section “patterns”. If set
+# , the headers and body/attachments of messages to be searched are decoded
+# before searching. If unset, messages are searched as they appear in the folder.
+#
+# Users searching attachments or for non-ASCII characters should set this value
+# because decoding also includes MIME parsing/decoding and possible character set
+# conversions. Otherwise mutt will attempt to match against the raw message
+# received (for example quoted-printable encoded or with encoded headers) which
+# may lead to incorrect search results.
+#
+set thorough_search=yes
+
+
+# 3.343. thread_received
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt uses the date received rather than the date sent to thread
+# messages by subject.
+#
+set thread_received=yes
+
+
+# 3.344. tilde
+#
+# Type: boolean
+# Default: no
+#
+# When set, the internal-pager will pad blank lines to the bottom of the screen
+# with a tilde (“~”).
+#
+set tilde=yes
+
+
+# 3.345. time_inc
+#
+# Type: number
+# Default: 0
+#
+# Along with $read_inc, $write_inc, and $net_inc, this variable controls the
+# frequency with which progress updates are displayed. It suppresses updates less
+# than $time_inc milliseconds apart. This can improve throughput on systems with
+# slow terminals, or when running mutt on a remote system.
+#
+# Also see the “tuning” section of the manual for performance considerations.
+#
+set time_inc=250
+
+
+# 3.346. timeout
+#
+# Type: number
+# Default: 600
+#
+# When Mutt is waiting for user input either idling in menus or in an interactive
+# prompt, Mutt would block until input is present. Depending on the context, this
+# would prevent certain operations from working, like checking for new mail or
+# keeping an IMAP connection alive.
+#
+# This variable controls how many seconds Mutt will at most wait until it aborts
+# waiting for input, performs these operations and continues to wait for input.
+#
+# A value of zero or less will cause Mutt to never time out.
+#
+
+
+# 3.347. tmpdir
+#
+# Type: path
+# Default: (empty)
+#
+# This variable allows you to specify where Mutt will place its temporary files
+# needed for displaying and composing messages. If this variable is not set, the
+# environment variable $TMPDIR is used. If $TMPDIR is not set then “/tmp” is
+# used.
+#
+
+
+# 3.348. to_chars
+#
+# Type: string
+# Default: “ +TCFL”
+#
+# Controls the character used to indicate mail addressed to you. The first
+# character is the one used when the mail is not addressed to your address. The
+# second is used when you are the only recipient of the message. The third is
+# when your address appears in the “To:” header field, but you are not the only
+# recipient of the message. The fourth character is used when your address is
+# specified in the “Cc:” header field, but you are not the only recipient. The
+# fifth character is used to indicate mail that was sent by you. The sixth
+# character is used to indicate when a mail was sent to a mailing-list you
+# subscribe to.
+#
+
+
+# 3.349. trash
+#
+# Type: path
+# Default: (empty)
+#
+# If set, this variable specifies the path of the trash folder where the mails
+# marked for deletion will be moved, instead of being irremediably purged.
+#
+# NOTE: When you delete a message in the trash folder, it is really deleted, so
+# that you have a way to clean the trash.
+#
+
+
+# 3.350. ts_icon_format
+#
+# Type: string
+# Default: “M%?n?AIL&ail?”
+#
+# Controls the format of the icon title, as long as “$ts_enabled” is set. This
+# string is identical in formatting to the one used by “$status_format”.
+#
+
+
+# 3.351. ts_enabled
+#
+# Type: boolean
+# Default: no
+#
+# Controls whether mutt tries to set the terminal status line and icon name. Most
+# terminal emulators emulate the status line in the window title.
+#
+set ts_enabled=yes
+
+
+# 3.352. ts_status_format
+#
+# Type: string
+# Default: “Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?”
+#
+# Controls the format of the terminal status line (or window title), provided
+# that “$ts_enabled” has been set. This string is identical in formatting to the
+# one used by “$status_format”.
+#
+set ts_status_format="mutt: %f%?V?[%V]&?"
+
+
+# 3.353. tunnel
+#
+# Type: string
+# Default: (empty)
+#
+# Setting this variable will cause mutt to open a pipe to a command instead of a
+# raw socket. You may be able to use this to set up preauthenticated connections
+# to your IMAP/POP3/SMTP server. Example:
+#
+# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
+#
+# Note: For this example to work you must be able to log in to the remote machine
+# without having to enter a password.
+#
+# When set, Mutt uses the tunnel for all remote connections. Please see “
+# account-hook” in the manual for how to use different tunnel commands per
+# connection.
+#
+
+
+# 3.354. uncollapse_jump
+#
+# Type: boolean
+# Default: no
+#
+# When set, Mutt will jump to the next unread message, if any, when the current
+# thread is uncollapsed.
+#
+
+
+# 3.355. uncollapse_new
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will automatically uncollapse any collapsed thread that receives
+# a new message. When unset, collapsed threads will remain collapsed. the
+# presence of the new message will still affect index sorting, though.
+#
+
+
+# 3.356. use_8bitmime
+#
+# Type: boolean
+# Default: no
+#
+# Warning: do not set this variable unless you are using a version of sendmail
+# which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be
+# able to send mail.
+#
+# When set, Mutt will invoke $sendmail with the -B8BITMIME flag when sending
+# 8-bit messages to enable ESMTP negotiation.
+#
+
+
+# 3.357. use_domain
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will qualify all local addresses (ones without the “@host”
+# portion) with the value of $hostname. If unset, no addresses will be qualified.
+#
+
+
+# 3.358. use_envelope_from
+#
+# Type: boolean
+# Default: no
+#
+# When set, mutt will set the envelope sender of the message. If
+# $envelope_from_address is set, it will be used as the sender address. If unset,
+# mutt will attempt to derive the sender from the “From:” header.
+#
+# Note that this information is passed to sendmail command using the -f command
+# line switch. Therefore setting this option is not useful if the $sendmail
+# variable already contains -f or if the executable pointed to by $sendmail
+# doesn't support the -f switch.
+#
+set use_envelope_from=yes
+
+
+# 3.359. use_from
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will generate the “From:” header field when sending messages. If
+# unset, no “From:” header field will be generated unless the user explicitly
+# sets one using the “my_hdr” command.
+#
+
+
+# 3.360. use_ipv6
+#
+# Type: boolean
+# Default: yes
+#
+# When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If
+# this option is unset, Mutt will restrict itself to IPv4 addresses. Normally,
+# the default should work.
+#
+
+
+# 3.361. user_agent
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will add a “User-Agent:” header to outgoing messages, indicating
+# which version of mutt was used for composing them.
+#
+
+
+# 3.362. visual
+#
+# Type: path
+# Default: (empty)
+#
+# Specifies the visual editor to invoke when the “~v” command is given in the
+# built-in editor.
+#
+
+
+# 3.363. wait_key
+#
+# Type: boolean
+# Default: yes
+#
+# Controls whether Mutt will ask you to press a key after an external command has
+# been invoked by these functions: <shell-escape>, <pipe-message>, <pipe-entry>,
+# <print-message>, and <print-entry> commands.
+#
+# It is also used when viewing attachments with “auto_view”, provided that the
+# corresponding mailcap entry has a needsterminal flag, and the external program
+# is interactive.
+#
+# When set, Mutt will always ask for a key. When unset, Mutt will wait for a key
+# only if the external command returned a non-zero status.
+#
+set wait_key=no
+
+
+# 3.364. weed
+#
+# Type: boolean
+# Default: yes
+#
+# When set, mutt will weed headers when displaying, forwarding, printing, or
+# replying to messages.
+#
+
+
+# 3.365. wrap
+#
+# Type: number
+# Default: 0
+#
+# When set to a positive value, mutt will wrap text at $wrap characters. When set
+# to a negative value, mutt will wrap text so that there are $wrap characters of
+# empty space on the right side of the terminal. Setting it to zero makes mutt
+# wrap at the terminal width.
+#
+# Also see $reflow_wrap.
+#
+set wrap=-10
+
+
+# 3.366. wrap_headers
+#
+# Type: number
+# Default: 78
+#
+# This option specifies the number of characters to use for wrapping an outgoing
+# message's headers. Allowed values are between 78 and 998 inclusive.
+#
+# Note: This option usually shouldn't be changed. RFC5233 recommends a line
+# length of 78 (the default), so please only change this setting when you know
+# what you're doing.
+#
+
+
+# 3.367. wrap_search
+#
+# Type: boolean
+# Default: yes
+#
+# Controls whether searches wrap around the end.
+#
+# When set, searches will wrap around the first (or last) item. When unset,
+# incremental searches will not wrap.
+#
+
+
+# 3.368. wrapmargin
+#
+# Type: number
+# Default: 0
+#
+# (DEPRECATED) Equivalent to setting $wrap with a negative value.
+#
+
+
+# 3.369. write_bcc
+#
+# Type: boolean
+# Default: yes
+#
+# Controls whether mutt writes out the “Bcc:” header when preparing messages to
+# be sent. Exim users may wish to unset this. If mutt is set to deliver directly
+# via SMTP (see $smtp_url), this option does nothing: mutt will never write out
+# the “Bcc:” header in this case.
+#
+
+
+# 3.370. write_inc
+#
+# Type: number
+# Default: 10
+#
+# When writing a mailbox, a message will be printed every $write_inc messages to
+# indicate progress. If set to 0, only a single message will be displayed before
+# writing a mailbox.
+#
+# Also see the $read_inc, $net_inc and $time_inc variables and the “tuning”
+# section of the manual for performance considerations.
+#
set my_confdir="$HOME/.mutt"
-# set abort_noattach=no
-#
-# Name: abort_noattach
-# Type: quadoption
-# Default: no
-#
-#
-# When the body of the message matches $abort_noattach_regexp and
-# there are no attachments, this quadoption controls whether to
-# abort sending the message.
-#
-set abort_noattach=ask-yes
-#
-# set abort_noattach_regexp="attach"
-#
-# Name: abort_noattach_regexp
-# Type: regular expression
-# Default: "attach"
-#
-#
-# Specifies a regular expression to match against the body of the
-# message, to determine if an attachment was mentioned but
-# mistakenly forgotten. If it matches, $abort_noattach will be
-# consulted to determine if message sending will be aborted.
-#
-# Like other regular expressions in Mutt, the search is case
-# sensitive if the pattern contains at least one upper case letter,
-# and case insensitive otherwise.
-#
-set abort_noattach_regexp='attach|beigefügt|angehängt|an(hang|lage)'
-#'attach(ing|ed|ment)?|included\W+(with|in)\W+th(is|e\W+(curr|pres)ent)\W+mail|an(geh(ä|=E4|=C3=A4)ngt|h(ä|=E4|=C3=A4)ngsel|bei)|bei(gef(ü|=FC|=C3=BC)gt|lage)|(im|siehe)\W+(anhang|beilage)|attach(e|er|(é|=E9|=C3=A9)e?s?|ement|ant)'
-#
-# set abort_nosubject=ask-yes
-#
-# Name: abort_nosubject
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# If set to yes, when composing messages and no subject is given
-# at the subject prompt, composition will be aborted. If set to
-# no, composing messages with no subject given at the subject
-# prompt will never be aborted.
-#
-#
-# set abort_unmodified=yes
-#
-# Name: abort_unmodified
-# Type: quadoption
-# Default: yes
-#
-#
-# If set to yes, composition will automatically abort after
-# editing the message body if no changes are made to the file (this
-# check only happens after the first edit of the file). When set
-# to no, composition will never be aborted.
-#
-#
-# set alias_file="~/.muttrc"
-#
-# Name: alias_file
-# Type: path
-# Default: "~/.muttrc"
-#
-#
-# The default file in which to save aliases created by the
-# ``create-alias'' function.
-#
-# Note: Mutt will not automatically source this file; you must
-# explicitly use the ``source'' command for it to be executed.
-#
-# The default for this option is the currently used muttrc file, or
-# ``~/.muttrc'' if no user muttrc was found.
-#
-#
-# set alias_format="%4n %2f %t %-10a %r"
-#
-# Name: alias_format
-# Type: string
-# Default: "%4n %2f %t %-10a %r"
-#
-#
-# Specifies the format of the data displayed for the `alias' menu. The
-# following printf(3)-style sequences are available:
-#
-# %a alias name
-# %f flags - currently, a "d" for an alias marked for deletion
-# %n index number
-# %r address which alias expands to
-# %t character which indicates if the alias is tagged for inclusion
-#
-#
-# set allow_8bit=yes
-#
-# Name: allow_8bit
-# Type: boolean
-# Default: yes
-#
-#
-# Controls whether 8-bit data is converted to 7-bit using either Quoted-
-# Printable or Base64 encoding when sending mail.
-#
-#
-# set allow_ansi=no
-#
-# Name: allow_ansi
-# Type: boolean
-# Default: no
-#
-#
-# Controls whether ANSI color codes in messages (and color tags in
-# rich text messages) are to be interpreted.
-# Messages containing these codes are rare, but if this option is set,
-# their text will be colored accordingly. Note that this may override
-# your color choices, and even present a security problem, since a
-# message could include a line like "[-- PGP output follows ..." and
-# give it the same color as your attachment color.
-#
-#
-# set arrow_cursor=no
-#
-# Name: arrow_cursor
-# Type: boolean
-# Default: no
-#
-#
-# When set, an arrow (``->'') will be used to indicate the current entry
-# in menus instead of highlighting the whole line. On slow network or modem
-# links this will make response faster because there is less that has to
-# be redrawn on the screen when moving to the next or previous entries
-# in the menu.
-#
-#
-# set ascii_chars=no
-#
-# Name: ascii_chars
-# Type: boolean
-# Default: no
-#
-#
-# If set, Mutt will use plain ASCII characters when displaying thread
-# and attachment trees, instead of the default ACS characters.
-#
-#
-# set askbcc=no
-#
-# Name: askbcc
-# Type: boolean
-# Default: no
-#
-#
-# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
-# before editing an outgoing message.
-#
-#
-# set askcc=no
-#
-# Name: askcc
-# Type: boolean
-# Default: no
-#
-#
-# If set, Mutt will prompt you for carbon-copy (Cc) recipients before
-# editing the body of an outgoing message.
-#
-#
-# set assumed_charset=""
-#
-# Name: assumed_charset
-# Type: string
-# Default: ""
-#
-#
-# This variable is a colon-separated list of character encoding
-# schemes for messages without character encoding indication.
-# Header field values and message body content without character encoding
-# indication would be assumed that they are written in one of this list.
-# By default, all the header fields and message body without any charset
-# indication are assumed to be in "us-ascii".
-#
-# For example, Japanese users might prefer this:
-#
-# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
-#
-# However, only the first content is valid for the message body.
-#
-#
-# set attach_charset=""
-#
-# Name: attach_charset
-# Type: string
-# Default: ""
-#
-#
-# This variable is a colon-separated list of character encoding
-# schemes for text file attachments.
-# If unset, $charset value will be used instead.
-# For example, the following configuration would work for Japanese
-# text handling:
-#
-# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
-#
-# Note: "iso-2022-*" must be put at the head of the value as shown above
-# if included.
-#
-#
-# set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
-#
-# Name: attach_format
-# Type: string
-# Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
-#
-#
-# This variable describes the format of the `attachment' menu. The
-# following printf-style sequences are understood:
-#
-# %C charset
-# %c requires charset conversion (n or c)
-# %D deleted flag
-# %d description
-# %e MIME content-transfer-encoding
-# %f filename
-# %I disposition (I=inline, A=attachment)
-# %m major MIME type
-# %M MIME subtype
-# %n attachment number
-# %Q "Q", if MIME part qualifies for attachment counting
-# %s size
-# %t tagged flag
-# %T graphic tree characters
-# %u unlink (=to delete) flag
-# %X number of qualifying MIME parts in this part and its children
-# (please see the ``attachments'' section for possible speed effects)
-# %>X right justify the rest of the string and pad with character "X"
-# %|X pad to the end of the line with character "X"
-# %*X soft-fill with character "X" as pad
-#
-#
-# For an explanation of `soft-fill', see the ``$index_format'' documentation.
-#
-#
-# set attach_sep="\n"
-#
-# Name: attach_sep
-# Type: string
-# Default: "\n"
-#
-#
-# The separator to add between attachments when operating (saving,
-# printing, piping, etc) on a list of tagged attachments.
-#
-#
-# set attach_split=yes
-#
-# Name: attach_split
-# Type: boolean
-# Default: yes
-#
-#
-# If this variable is unset, when operating (saving, printing, piping,
-# etc) on a list of tagged attachments, Mutt will concatenate the
-# attachments and will operate on them as a single attachment. The
-# ``$attach_sep'' separator is added after each attachment. When set,
-# Mutt will operate on the attachments one by one.
-#
-#
-# set attribution="On %d, %n wrote:"
-#
-# Name: attribution
-# Type: string
-# Default: "On %d, %n wrote:"
-#
-#
-# This is the string that will precede a message which has been included
-# in a reply. For a full listing of defined printf()-like sequences see
-# the section on ``$index_format''.
-#
-set attribution="Quoting %n, who wrote on %{%Y-%m-%d} at %{%H:%M %z}:"
-#
-# set autoedit=no
-#
-# Name: autoedit
-# Type: boolean
-# Default: no
-#
-#
-# When set along with ``$edit_headers'', Mutt will skip the initial
-# send-menu and allow you to immediately begin editing the body of your
-# message. The send-menu may still be accessed once you have finished
-# editing the body of your message.
-#
-# Also see ``$fast_reply''.
-#
-set autoedit
-#
-# set auto_tag=no
-#
-# Name: auto_tag
-# Type: boolean
-# Default: no
-#
-#
-# When set, functions in the index menu which affect a message
-# will be applied to all tagged messages (if there are any). When
-# unset, you must first use the tag-prefix function (default: ";") to
-# make the next function apply to all tagged messages.
-#
-#
-# set beep=yes
-#
-# Name: beep
-# Type: boolean
-# Default: yes
-#
-#
-# When this variable is set, mutt will beep when an error occurs.
-#
-set beep=no
-#
-# set beep_new=no
-#
-# Name: beep_new
-# Type: boolean
-# Default: no
-#
-#
-# When this variable is set, mutt will beep whenever it prints a message
-# notifying you of new mail. This is independent of the setting of the
-# ``$beep'' variable.
-#
-#
-# set bounce=ask-yes
-#
-# Name: bounce
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# Controls whether you will be asked to confirm bouncing messages.
-# If set to yes you don't get asked if you want to bounce a
-# message. Setting this variable to no is not generally useful,
-# and thus not recommended, because you are unable to bounce messages.
-#
-#
-# set bounce_delivered=yes
-#
-# Name: bounce_delivered
-# Type: boolean
-# Default: yes
-#
-#
-# When this variable is set, mutt will include Delivered-To headers when
-# bouncing messages. Postfix users may wish to unset this variable.
-#
-# Note: On Debian systems, this option is unset by default in
-# /etc/Muttrc.
-#
-#
-# set braille_friendly=no
-#
-# Name: braille_friendly
-# Type: boolean
-# Default: no
-#
-#
-# When this variable is set, mutt will place the cursor at the beginning
-# of the current line in menus, even when the arrow_cursor variable
-# is unset, making it easier for blind persons using Braille displays to
-# follow these menus. The option is disabled by default because many
-# visual terminals don't permit making the cursor invisible.
-#
-#
-# set check_mbox_size=no
-#
-# Name: check_mbox_size
-# Type: boolean
-# Default: no
-#
-#
-# When this variable is set, mutt will use file size attribute instead of
-# access time when checking for new mail.
-#
-#
-# set charset=""
-#
-# Name: charset
-# Type: string
-# Default: ""
-#
-#
-# Character set your terminal uses to display and enter textual data.
-# It is also the fallback for $send_charset.
-#
-#
-# set check_new=yes
-#
-# Name: check_new
-# Type: boolean
-# Default: yes
-#
-#
-# Note: this option only affects maildir and MH style
-# mailboxes.
-#
-# When set, Mutt will check for new mail delivered while the
-# mailbox is open. Especially with MH mailboxes, this operation can
-# take quite some time since it involves scanning the directory and
-# checking each file to see if it has already been looked at. If
-# check_new is unset, no check for new mail is performed
-# while the mailbox is open.
-#
-#
-# set collapse_unread=yes
-#
-# Name: collapse_unread
-# Type: boolean
-# Default: yes
-#
-#
-# When unset, Mutt will not collapse a thread if it contains any
-# unread messages.
-#
-#
-# set uncollapse_jump=no
-#
-# Name: uncollapse_jump
-# Type: boolean
-# Default: no
-#
-#
-# When set, Mutt will jump to the next unread message, if any,
-# when the current thread is uncollapsed.
-#
-#
-# set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
-#
-# Name: compose_format
-# Type: string
-# Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
-#
-#
-# Controls the format of the status line displayed in the Compose
-# menu. This string is similar to ``$status_format'', but has its own
-# set of printf()-like sequences:
-#
-# %a total number of attachments
-# %h local hostname
-# %l approximate size (in bytes) of the current message
-# %v Mutt version string
-#
-#
-# See the text describing the ``$status_format'' option for more
-# information on how to set ``$compose_format''.
-#
-#
-# set config_charset=""
-#
-# Name: config_charset
-# Type: string
-# Default: ""
-#
-#
-# When defined, Mutt will recode commands in rc files from this
-# encoding.
-#
-#
-# set confirmappend=yes
-#
-# Name: confirmappend
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will prompt for confirmation when appending messages to
-# an existing mailbox.
-#
-set confirmappend=no
-#
-# set confirmcreate=yes
-#
-# Name: confirmcreate
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will prompt for confirmation when saving messages to a
-# mailbox which does not yet exist before creating it.
-#
-#
-# set connect_timeout=30
-#
-# Name: connect_timeout
-# Type: number
-# Default: 30
-#
-#
-# Causes Mutt to timeout a network connection (for IMAP or POP) after this
-# many seconds if the connection is not able to be established. A negative
-# value causes Mutt to wait indefinitely for the connection to succeed.
-#
-#
-# set content_type="text/plain"
-#
-# Name: content_type
-# Type: string
-# Default: "text/plain"
-#
-#
-# Sets the default Content-Type for the body of newly composed messages.
-#
-#
-# set copy=yes
-#
-# Name: copy
-# Type: quadoption
-# Default: yes
-#
-#
-# This variable controls whether or not copies of your outgoing messages
-# will be saved for later references. Also see ``$record'',
-# ``$save_name'', ``$force_name'' and ``fcc-hook''.
-#
-set copy=yes
-#
-# set crypt_use_gpgme=no
-#
-# Name: crypt_use_gpgme
-# Type: boolean
-# Default: no
-#
-#
-# This variable controls the use of the GPGME-enabled crypto backends.
-# If it is set and Mutt was built with gpgme support, the gpgme code for
-# S/MIME and PGP will be used instead of the classic code. Note that
-# you need to set this option in .muttrc; it won't have any effect when
-# used interactively.
-#
-#
-# set crypt_use_pka=no
-#
-# Name: crypt_use_pka
-# Type: boolean
-# Default: no
-#
-#
-# (http://www.g10code.de/docs/pka-intro.de.pdf) during signature
-# verification (only supported by the GPGME backend).
-#
-#
-# set crypt_autopgp=yes
-#
-# Name: crypt_autopgp
-# Type: boolean
-# Default: yes
-#
-#
-# This variable controls whether or not mutt may automatically enable
-# PGP encryption/signing for messages. See also ``$crypt_autoencrypt'',
-# ``$crypt_replyencrypt'',
-# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
-#
-#
-# set crypt_autosmime=yes
-#
-# Name: crypt_autosmime
-# Type: boolean
-# Default: yes
-#
-#
-# This variable controls whether or not mutt may automatically enable
-# S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'',
-# ``$crypt_replyencrypt'',
-# ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
-#
-#
-# set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
-#
-# Name: date_format
-# Type: string
-# Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
-#
-#
-# This variable controls the format of the date printed by the ``%d''
-# sequence in ``$index_format''. This is passed to the strftime
-# call to process the date. See the man page for strftime(3) for
-# the proper syntax.
-#
-# Unless the first character in the string is a bang (``!''), the month
-# and week day names are expanded according to the locale specified in
-# the variable ``$locale''. If the first character in the string is a
-# bang, the bang is discarded, and the month and week day names in the
-# rest of the string are expanded in the C locale (that is in US
-# English).
-#
-set date_format="%d %b %Y %T%Z"
-#
-# set default_hook="~f %s !~P | (~P ~C %s)"
-#
-# Name: default_hook
-# Type: string
-# Default: "~f %s !~P | (~P ~C %s)"
-#
-#
-# This variable controls how message-hooks, reply-hooks, send-hooks,
-# send2-hooks, save-hooks, and fcc-hooks will
-# be interpreted if they are specified with only a simple regexp,
-# instead of a matching pattern. The hooks are expanded when they are
-# declared, so a hook will be interpreted according to the value of this
-# variable at the time the hook is declared. The default value matches
-# if the message is either from a user matching the regular expression
-# given, or if it is from you (if the from address matches
-# ``alternates'') and is to or cc'ed to a user matching the given
-# regular expression.
-#
-#
-# set delete=ask-yes
-#
-# Name: delete
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# Controls whether or not messages are really deleted when closing or
-# synchronizing a mailbox. If set to yes, messages marked for
-# deleting will automatically be purged without prompting. If set to
-# no, messages marked for deletion will be kept in the mailbox.
-#
-set delete=yes
-#
-# set delete_untag=yes
-#
-# Name: delete_untag
-# Type: boolean
-# Default: yes
-#
-#
-# If this option is set, mutt will untag messages when marking them
-# for deletion. This applies when you either explicitly delete a message,
-# or when you save it to another folder.
-#
-#
-# set digest_collapse=yes
-#
-# Name: digest_collapse
-# Type: boolean
-# Default: yes
-#
-#
-# If this option is set, mutt's received-attachments menu will not show the subparts of
-# individual messages in a multipart/digest. To see these subparts, press 'v' on that menu.
-#
-#
-# set display_filter=""
-#
-# Name: display_filter
-# Type: path
-# Default: ""
-#
-#
-# When set, specifies a command used to filter messages. When a message
-# is viewed it is passed as standard input to $display_filter, and the
-# filtered message is read from the standard output.
-#
-#
-# set dotlock_program="/usr/bin/mutt_dotlock"
-#
-# Name: dotlock_program
-# Type: path
-# Default: "/usr/bin/mutt_dotlock"
-#
-#
-# Contains the path of the mutt_dotlock (8) binary to be used by
-# mutt.
-#
-#
-# set dsn_notify=""
-#
-# Name: dsn_notify
-# Type: string
-# Default: ""
-#
-#
-# This variable sets the request for when notification is returned. The
-# string consists of a comma separated list (no spaces!) of one or more
-# of the following: never, to never request notification,
-# failure, to request notification on transmission failure,
-# delay, to be notified of message delays, success, to be
-# notified of successful transmission.
-#
-# Example: set dsn_notify="failure,delay"
-#
-# Note: when using $sendmail for delivery, you should not enable
-# this unless you are either using Sendmail 8.8.x or greater or a MTA
-# providing a sendmail(1)-compatible interface supporting the -N option
-# for DSN. For SMTP delivery, it depends on the server whether DSN is
-# supported or not.
-#
-#
-# set dsn_return=""
-#
-# Name: dsn_return
-# Type: string
-# Default: ""
-#
-#
-# This variable controls how much of your message is returned in DSN
-# messages. It may be set to either hdrs to return just the
-# message header, or full to return the full message.
-#
-# Example: set dsn_return=hdrs
-#
-# Note: when using $sendmail for delivery, you should not enable
-# this unless you are either using Sendmail 8.8.x or greater or a MTA
-# providing a sendmail(1)-compatible interface supporting the -R option
-# for DSN. For SMTP delivery, it depends on the server whether DSN is
-# supported or not.
-#
-#
-# set duplicate_threads=yes
-#
-# Name: duplicate_threads
-# Type: boolean
-# Default: yes
-#
-#
-# This variable controls whether mutt, when sorting by threads, threads
-# messages with the same message-id together. If it is set, it will indicate
-# that it thinks they are duplicates of each other with an equals sign
-# in the thread diagram.
-#
-#
-# set edit_headers=no
-#
-# Name: edit_headers
-# Type: boolean
-# Default: no
-#
-#
-# This option allows you to edit the header of your outgoing messages
-# along with the body of your message.
-#
-# Note that changes made to the References: and Date: headers are
-# ignored for interoperability reasons.
-#
-set edit_headers=yes
-#
-# set editor=""
-#
-# Name: editor
-# Type: path
-# Default: ""
-#
-#
-# This variable specifies which editor is used by mutt.
-# It defaults to the value of the VISUAL, or EDITOR, environment
-# variable, or to the string "/usr/bin/editor" if neither of those are set.
-#
-set editor="mailplate --edit --auto --keep-unknown"
-#
-# set encode_from=no
-#
-# Name: encode_from
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will quoted-printable encode messages when
-# they contain the string "From " in the beginning of a line.
-# Useful to avoid the tampering certain mail delivery and transport
-# agents tend to do with messages.
-#
-#
-# set envelope_from_address=""
-#
-# Name: envelope_from_address
-# Type: e-mail address
-# Default: ""
-#
-#
-# Manually sets the envelope sender for outgoing messages.
-# This value is ignored if ``$use_envelope_from'' is unset.
-#
-#
-# set escape="~"
-#
-# Name: escape
-# Type: string
-# Default: "~"
-#
-#
-# Escape character to use for functions in the builtin editor.
-#
-#
-# set fast_reply=no
-#
-# Name: fast_reply
-# Type: boolean
-# Default: no
-#
-#
-# When set, the initial prompt for recipients and subject are skipped
-# when replying to messages, and the initial prompt for subject is
-# skipped when forwarding messages.
-#
-# Note: this variable has no effect when the ``$autoedit''
-# variable is set.
-#
-set fast_reply=yes
-#
-# set fcc_attach=yes
-#
-# Name: fcc_attach
-# Type: boolean
-# Default: yes
-#
-#
-# This variable controls whether or not attachments on outgoing messages
-# are saved along with the main body of your message.
-#
-set fcc_attach=yes
-#
-# set fcc_clear=no
-#
-# Name: fcc_clear
-# Type: boolean
-# Default: no
-#
-#
-# When this variable is set, FCCs will be stored unencrypted and
-# unsigned, even when the actual message is encrypted and/or
-# signed.
-# (PGP only)
-#
-#
-# set folder="~/Mail"
-#
-# Name: folder
-# Type: path
-# Default: "~/Mail"
-#
-#
-# Specifies the default location of your mailboxes. A `+' or `=' at the
-# beginning of a pathname will be expanded to the value of this
-# variable. Note that if you change this variable from the default
-# value you need to make sure that the assignment occurs before
-# you use `+' or `=' for any other variables since expansion takes place
-# during the `set' command.
-#
-set folder="~/mail"
-#
-# set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
-#
-# Name: folder_format
-# Type: string
-# Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
-#
-#
-# This variable allows you to customize the file browser display to your
-# personal taste. This string is similar to ``$index_format'', but has
-# its own set of printf()-like sequences:
-#
-# %C current file number
-# %d date/time folder was last modified
-# %f filename
-# %F file permissions
-# %g group name (or numeric gid, if missing)
-# %l number of hard links
-# %N N if folder has new mail, blank otherwise
-# %s size in bytes
-# %t * if the file is tagged, blank otherwise
-# %u owner name (or numeric uid, if missing)
-# %>X right justify the rest of the string and pad with character "X"
-# %|X pad to the end of the line with character "X"
-# %*X soft-fill with character "X" as pad
-#
-#
-# For an explanation of `soft-fill', see the ``$index_format'' documentation.
-#
-#
-# set followup_to=yes
-#
-# Name: followup_to
-# Type: boolean
-# Default: yes
-#
-# ## ENABLED BY A DEFAULT HOOK
-#
-# Controls whether or not the Mail-Followup-To header field is
-# generated when sending mail. When set, Mutt will generate this
-# field when you are replying to a known mailing list, specified with
-# the ``subscribe'' or ``lists'' commands.
-#
-# This field has two purposes. First, preventing you from
-# receiving duplicate copies of replies to messages which you send
-# to mailing lists, and second, ensuring that you do get a reply
-# separately for any messages sent to known lists to which you are
-# not subscribed. The header will contain only the list's address
-# for subscribed lists, and both the list address and your own
-# email address for unsubscribed lists. Without this header, a
-# group reply to your message sent to a subscribed list will be
-# sent to both the list and your address, resulting in two copies
-# of the same email for you.
-#
-#
-# set force_name=no
-#
-# Name: force_name
-# Type: boolean
-# Default: no
-#
-#
-# This variable is similar to ``$save_name'', except that Mutt will
-# store a copy of your outgoing message by the username of the address
-# you are sending to even if that mailbox does not exist.
-#
-# Also see the ``$record'' variable.
-#
-#
-# set forward_decode=yes
-#
-# Name: forward_decode
-# Type: boolean
-# Default: yes
-#
-#
-# Controls the decoding of complex MIME messages into text/plain when
-# forwarding a message. The message header is also RFC2047 decoded.
-# This variable is only used, if ``$mime_forward'' is unset,
-# otherwise ``$mime_forward_decode'' is used instead.
-#
-#
-# set forward_edit=yes
-#
-# Name: forward_edit
-# Type: quadoption
-# Default: yes
-#
-#
-# This quadoption controls whether or not the user is automatically
-# placed in the editor when forwarding messages. For those who always want
-# to forward with no modification, use a setting of ``no''.
-#
-#
-# set forward_format="[%a: %s]"
-#
-# Name: forward_format
-# Type: string
-# Default: "[%a: %s]"
-#
-#
-# This variable controls the default subject when forwarding a message.
-# It uses the same format sequences as the ``$index_format'' variable.
-#
-set forward_format="(fwd) %s"
-#
-# set forward_quote=no
-#
-# Name: forward_quote
-# Type: boolean
-# Default: no
-#
-#
-# When set forwarded messages included in the main body of the
-# message (when ``$mime_forward'' is unset) will be quoted using
-# ``$indent_string''.
-#
-#
-# set from=""
-#
-# Name: from
-# Type: e-mail address
-# Default: ""
-#
-#
-# When set, this variable contains a default from address. It
-# can be overridden using my_hdr (including from send-hooks) and
-# ``$reverse_name''. This variable is ignored if ``$use_from''
-# is unset.
-#
-# Defaults to the contents of the environment variable EMAIL.
-#
-set from='martin f krafft <madduck@madduck.net>'
-#
-# set gecos_mask="^[^,]*"
-#
-# Name: gecos_mask
-# Type: regular expression
-# Default: "^[^,]*"
-#
-#
-# A regular expression used by mutt to parse the GECOS field of a password
-# entry when expanding the alias. By default the regular expression is set
-# to "^[^,]*" which will return the string up to the first "," encountered.
-# If the GECOS field contains a string like "lastname, firstname" then you
-# should set the gecos_mask=".*".
-#
-# This can be useful if you see the following behavior: you address a e-mail
-# to user ID stevef whose full name is Steve Franklin. If mutt expands
-# stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to
-# a regular expression that will match the whole name so mutt will expand
-# "Franklin" to "Franklin, Steve".
-#
-#
-# set hdrs=yes
-#
-# Name: hdrs
-# Type: boolean
-# Default: yes
-#
-#
-# When unset, the header fields normally added by the ``my_hdr''
-# command are not created. This variable must be unset before
-# composing a new message or replying in order to take effect. If set,
-# the user defined header fields are added to every new message.
-#
-#
-# set header=no
-#
-# Name: header
-# Type: boolean
-# Default: no
-#
-#
-# When set, this variable causes Mutt to include the header
-# of the message you are replying to into the edit buffer.
-# The ``$weed'' setting applies.
-#
-#
-# set help=yes
-#
-# Name: help
-# Type: boolean
-# Default: yes
-#
-#
-# When set, help lines describing the bindings for the major functions
-# provided by each menu are displayed on the first line of the screen.
-#
-# Note: The binding will not be displayed correctly if the
-# function is bound to a sequence rather than a single keystroke. Also,
-# the help line may not be updated if a binding is changed while Mutt is
-# running. Since this variable is primarily aimed at new users, neither
-# of these should present a major problem.
-#
-#
-# set hidden_host=no
-#
-# Name: hidden_host
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will skip the host name part of ``$hostname'' variable
-# when adding the domain part to addresses. This variable does not
-# affect the generation of Message-IDs, and it will not lead to the
-# cut-off of first-level domains.
-#
-#
-# set hide_limited=no
-#
-# Name: hide_limited
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will not show the presence of messages that are hidden
-# by limiting, in the thread tree.
-#
-#
-# set hide_missing=yes
-#
-# Name: hide_missing
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will not show the presence of missing messages in the
-# thread tree.
-#
-#
-# set hide_thread_subject=yes
-#
-# Name: hide_thread_subject
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will not show the subject of messages in the thread
-# tree that have the same subject as their parent or closest previously
-# displayed sibling.
-#
-#
-# set hide_top_limited=no
-#
-# Name: hide_top_limited
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will not show the presence of messages that are hidden
-# by limiting, at the top of threads in the thread tree. Note that when
-# $hide_limited is set, this option will have no effect.
-#
-#
-# set hide_top_missing=yes
-#
-# Name: hide_top_missing
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will not show the presence of missing messages at the
-# top of threads in the thread tree. Note that when $hide_missing is
-# set, this option will have no effect.
-#
-#
-# set history=10
-#
-# Name: history
-# Type: number
-# Default: 10
-#
-#
-# This variable controls the size (in number of strings remembered) of
-# the string history buffer. The buffer is cleared each time the
-# variable is set.
-#
-#
-# set history_file="~/.mutthistory"
-#
-# Name: history_file
-# Type: path
-# Default: "~/.mutthistory"
-#
-#
-# The file in which Mutt will save its history.
-#
-set history_file="~/.var/mutt/history"
-#
-# set honor_followup_to=yes
-#
-# Name: honor_followup_to
-# Type: quadoption
-# Default: yes
-#
-#
-# This variable controls whether or not a Mail-Followup-To header is
-# honored when group-replying to a message.
-#
-#
-# set hostname=""
-#
-# Name: hostname
-# Type: string
-# Default: ""
-#
-#
-# Specifies the fully-qualified hostname of the system mutt is running on
-# containing the host's name and the DNS domain it belongs to. It is used
-# as the domain part (after ``@'') for local email addresses as well as
-# Message-Id headers.
-#
-# Its value is determined at startup as follows: If the node's name
-# as returned by the uname(3) function contains the hostname and the
-# domain, these are used to construct $hostname. If there is no
-# domain part returned, Mutt will look for a ``domain'' or ``search''
-# line in /etc/resolv.conf to determine the domain. Optionally, Mutt
-# can be compiled with a fixed domain name in which case a detected
-# one is not used.
-#
-# Also see ``$use_domain'' and ``$hidden_host''.
-#
-# Note: On Debian systems, the default for this variable is obtained
-# from /etc/mailname when Mutt starts.
-#
-#
-# set ignore_linear_white_space=no
-#
-# Name: ignore_linear_white_space
-# Type: boolean
-# Default: no
-#
-#
-# This option replaces linear-white-space between encoded-word
-# and *text to a single space to prevent the display of MIME-encoded
-# ``Subject'' field from being divided into multiple lines.
-#
-#
-# set ignore_list_reply_to=no
-#
-# Name: ignore_list_reply_to
-# Type: boolean
-# Default: no
-#
-#
-# Affects the behaviour of the reply function when replying to
-# messages from mailing lists (as defined by the ``subscribe'' or
-# ``lists'' commands). When set, if the ``Reply-To:'' field is
-# set to the same value as the ``To:'' field, Mutt assumes that the
-# ``Reply-To:'' field was set by the mailing list to automate responses
-# to the list, and will ignore this field. To direct a response to the
-# mailing list when this option is set, use the list-reply
-# function; group-reply will reply to both the sender and the
-# list.
-#
-set ignore_list_reply_to=yes
-#
-# set imap_authenticators=""
-#
-# Name: imap_authenticators
-# Type: string
-# Default: ""
-#
-#
-# This is a colon-delimited list of authentication methods mutt may
-# attempt to use to log in to an IMAP server, in the order mutt should
-# try them. Authentication methods are either 'login' or the right
-# side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi'
-# or 'cram-md5'. This parameter is case-insensitive. If this
-# parameter is unset (the default) mutt will try all available methods,
-# in order from most-secure to least-secure.
-#
-# Example: set imap_authenticators="gssapi:cram-md5:login"
-#
-# Note: Mutt will only fall back to other authentication methods if
-# the previous methods are unavailable. If a method is available but
-# authentication fails, mutt will not connect to the IMAP server.
-#
-#
-# set imap_check_subscribed=no
-#
-# Name: imap_check_subscribed
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will fetch the set of subscribed folders from
-# your server on connection, and add them to the set of mailboxes
-# it polls for new mail. See also the ``mailboxes'' command.
-#
-#
-# set imap_delim_chars="/."
-#
-# Name: imap_delim_chars
-# Type: string
-# Default: "/."
-#
-#
-# This contains the list of characters which you would like to treat
-# as folder separators for displaying IMAP paths. In particular it
-# helps in using the '=' shortcut for your folder variable.
-#
-#
-# set imap_headers=""
-#
-# Name: imap_headers
-# Type: string
-# Default: ""
-#
-#
-# Mutt requests these header fields in addition to the default headers
-# ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE
-# CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP
-# servers before displaying the index menu. You may want to add more
-# headers for spam detection. Note: This is a space separated list.
-#
-#
-# set imap_idle=no
-#
-# Name: imap_idle
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will attempt to use the IMAP IDLE extension
-# to check for new mail in the current mailbox. Some servers
-# (dovecot was the inspiration for this option) react badly
-# to mutt's implementation. If your connection seems to freeze
-# up periodically, try unsetting this.
-#
-#
-# set imap_keepalive=900
-#
-# Name: imap_keepalive
-# Type: number
-# Default: 900
-#
-#
-# This variable specifies the maximum amount of time in seconds that mutt
-# will wait before polling open IMAP connections, to prevent the server
-# from closing them before mutt has finished with them. The default is
-# well within the RFC-specified minimum amount of time (30 minutes) before
-# a server is allowed to do this, but in practice the RFC does get
-# violated every now and then. Reduce this number if you find yourself
-# getting disconnected from your IMAP server due to inactivity.
-#
-#
-# set imap_list_subscribed=no
-#
-# Name: imap_list_subscribed
-# Type: boolean
-# Default: no
-#
-#
-# This variable configures whether IMAP folder browsing will look for
-# only subscribed folders or all folders. This can be toggled in the
-# IMAP browser with the toggle-subscribed function.
-#
-#
-# set imap_login=""
-#
-# Name: imap_login
-# Type: string
-# Default: ""
-#
-#
-# Your login name on the IMAP server.
-#
-# This variable defaults to the value of imap_user.
-#
-#
-# set imap_pass=""
-#
-# Name: imap_pass
-# Type: string
-# Default: ""
-#
-#
-# Specifies the password for your IMAP account. If unset, Mutt will
-# prompt you for your password when you invoke the fetch-mail function.
-# Warning: you should only use this option when you are on a
-# fairly secure machine, because the superuser can read your muttrc even
-# if you are the only one who can read the file.
-#
-#
-# set imap_passive=yes
-#
-# Name: imap_passive
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will not open new IMAP connections to check for new
-# mail. Mutt will only check for new mail over existing IMAP
-# connections. This is useful if you don't want to be prompted to
-# user/password pairs on mutt invocation, or if opening the connection
-# is slow.
-#
-#
-# set imap_peek=yes
-#
-# Name: imap_peek
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will avoid implicitly marking your mail as read whenever
-# you fetch a message from the server. This is generally a good thing,
-# but can make closing an IMAP folder somewhat slower. This option
-# exists to appease speed freaks.
-#
-#
-# set imap_servernoise=yes
-#
-# Name: imap_servernoise
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will display warning messages from the IMAP
-# server as error messages. Since these messages are often
-# harmless, or generated due to configuration problems on the
-# server which are out of the users' hands, you may wish to suppress
-# them at some point.
-#
-#
-# set imap_user=""
-#
-# Name: imap_user
-# Type: string
-# Default: ""
-#
-#
-# The name of the user whose mail you intend to access on the IMAP
-# server.
-#
-# This variable defaults to your user name on the local machine.
-#
-#
-# set implicit_autoview=no
-#
-# Name: implicit_autoview
-# Type: boolean
-# Default: no
-#
-#
-# If set to ``yes'', mutt will look for a mailcap entry with the
-# copiousoutput flag set for every MIME attachment it doesn't have
-# an internal viewer defined for. If such an entry is found, mutt will
-# use the viewer defined in that entry to convert the body part to text
-# form.
-#
-set implicit_autoview=no
-#
-# set include=ask-yes
-#
-# Name: include
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# Controls whether or not a copy of the message(s) you are replying to
-# is included in your reply.
-#
-set include=yes
-#
-# set include_onlyfirst=no
-#
-# Name: include_onlyfirst
-# Type: boolean
-# Default: no
-#
-#
-# Controls whether or not Mutt includes only the first attachment
-# of the message you are replying.
-#
-#
-# set indent_string="> "
-#
-# Name: indent_string
-# Type: string
-# Default: "> "
-#
-#
-# Specifies the string to prepend to each line of text quoted in a
-# message to which you are replying. You are strongly encouraged not to
-# change this value, as it tends to agitate the more fanatical netizens.
-#
-# This option is a format string, please see the description of
-# ``$index_format'' for supported printf()-style sequences.
-#
-#
-# set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
-#
-# Name: index_format
-# Type: string
-# Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
-#
-#
-# This variable allows you to customize the message index display to
-# your personal taste.
-#
-# ``Format strings'' are similar to the strings used in the ``C''
-# function printf to format output (see the man page for more detail).
-# The following sequences are defined in Mutt:
-#
-# %a address of the author
-# %A reply-to address (if present; otherwise: address of author)
-# %b filename of the original message folder (think mailBox)
-# %B the list to which the letter was sent, or else the folder name (%b).
-# %c number of characters (bytes) in the message
-# %C current message number
-# %d date and time of the message in the format specified by
-# ``date_format'' converted to sender's time zone
-# %D date and time of the message in the format specified by
-# ``date_format'' converted to the local time zone
-# %e current message number in thread
-# %E number of messages in current thread
-# %f sender (address + real name), either From: or Return-Path:
-# %F author name, or recipient name if the message is from you
-# %H spam attribute(s) of this message
-# %i message-id of the current message
-# %l number of lines in the message (does not work with maildir,
-# mh, and possibly IMAP folders)
-# %L If an address in the To or CC header field matches an address
-# defined by the users ``subscribe'' command, this displays
-# "To <list-name>", otherwise the same as %F.
-# %m total number of message in the mailbox
-# %M number of hidden messages if the thread is collapsed.
-# %N message score
-# %n author's real name (or address if missing)
-# %O (_O_riginal save folder) Where mutt would formerly have
-# stashed the message: list name or recipient name if no list
-# %P progress indicator for the builtin pager (how much of the file has been displayed)
-# %s subject of the message
-# %S status of the message (N/D/d/!/r/*)
-# %t `to:' field (recipients)
-# %T the appropriate character from the $to_chars string
-# %u user (login) name of the author
-# %v first name of the author, or the recipient if the message is from you
-# %X number of attachments
-# (please see the ``attachments'' section for possible speed effects)
-# %y `x-label:' field, if present
-# %Y `x-label' field, if present, and (1) not at part of a thread tree,
-# (2) at the top of a thread, or (3) `x-label' is different from
-# preceding message's `x-label'.
-# %Z message status flags
-# %{fmt} the date and time of the message is converted to sender's
-# time zone, and ``fmt'' is expanded by the library function
-# ``strftime''; a leading bang disables locales
-# %[fmt] the date and time of the message is converted to the local
-# time zone, and ``fmt'' is expanded by the library function
-# ``strftime''; a leading bang disables locales
-# %(fmt) the local date and time when the message was received.
-# ``fmt'' is expanded by the library function ``strftime'';
-# a leading bang disables locales
-# %<fmt> the current local time. ``fmt'' is expanded by the library
-# function ``strftime''; a leading bang disables locales.
-# %>X right justify the rest of the string and pad with character "X"
-# %|X pad to the end of the line with character "X"
-# %*X soft-fill with character "X" as pad
-#
-#
-# `Soft-fill' deserves some explanation. Normal right-justification
-# will print everything to the left of the %>, displaying padding and
-# the whatever lies to the right only if there's room. By contrast,
-# soft-fill gives priority to the right-hand side, guaranteeing space
-# to display it and showing padding only if there's still room. If
-# necessary, soft-fill will eat text leftwards to make room for
-# rightward text.
-#
-# Note that these expandos are supported in
-# ``save-hook'', ``fcc-hook'' and ``fcc-save-hook'', too.
-#
-# See also: ``$to_chars''.
-#
-#set index_format="%4C %Z %{%b %d} %-15.15F %4c %?H?[%H] ?%s" ## DEFINED BY A DEFAULT HOOK
-#
-# set ispell="ispell"
-#
-# Name: ispell
-# Type: path
-# Default: "ispell"
-#
-#
-# How to invoke ispell (GNU's spell-checking software).
-#
-#
-# set keep_flagged=no
-#
-# Name: keep_flagged
-# Type: boolean
-# Default: no
-#
-#
-# If set, read messages marked as flagged will not be moved
-# from your spool mailbox to your ``$mbox'' mailbox, or as a result of
-# a ``mbox-hook'' command.
-#
-#
-# set locale="C"
-#
-# Name: locale
-# Type: string
-# Default: "C"
-#
-#
-# The locale used by strftime(3) to format dates. Legal values are
-# the strings your system accepts for the locale variable LC_TIME.
-#
-#
-# set mail_check=5
-#
-# Name: mail_check
-# Type: number
-# Default: 5
-#
-#
-# This variable configures how often (in seconds) mutt should look for
-# new mail. Also see the ``$timeout'' variable.
-#
-#
-# set mailcap_path=""
-#
-# Name: mailcap_path
-# Type: string
-# Default: ""
-#
-#
-# This variable specifies which files to consult when attempting to
-# display MIME bodies not directly supported by Mutt.
-#
-set mailcap_path="$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump"
-#
-# set mailcap_sanitize=yes
-#
-# Name: mailcap_sanitize
-# Type: boolean
-# Default: yes
-#
-#
-# If set, mutt will restrict possible characters in mailcap % expandos
-# to a well-defined set of safe characters. This is the safe setting,
-# but we are not sure it doesn't break some more advanced MIME stuff.
-#
-# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
-# DOING!
-#
-#
-# set header_cache=""
-#
-# Name: header_cache
-# Type: path
-# Default: ""
-#
-#
-# The header_cache variable points to the header cache database.
-# If header_cache points to a directory it will contain a header cache
-# database per folder. If header_cache points to a file that file will
-# be a single global header cache. By default it is unset so no header
-# caching will be used.
-#
-set header_cache="~/.var/mutt/header_cache"
-#
-# set header_cache_compress=yes
-#
-# Name: header_cache_compress
-# Type: boolean
-# Default: yes
-#
-# When mutt is compiled with qdbm or tokyocabinet as header cache backend,
-# this option determines whether the database will be compressed. Compression
-# results in database files roughly being one fifth of the usual diskspace,
-# but the uncompression can result in a slower opening of cached folder(s)
-# which in general is still much faster than opening non header cached
-# folders.
-#
-set header_cache_compress=no
-#
-# set maildir_header_cache_verify=yes
-#
-# Name: maildir_header_cache_verify
-# Type: boolean
-# Default: yes
-#
-#
-# Check for Maildir unaware programs other than mutt having modified maildir
-# files when the header cache is in use. This incurs one stat(2) per
-# message every time the folder is opened.
-#
-set maildir_header_cache_verify=no
-#
-# set maildir_trash=no
-#
-# Name: maildir_trash
-# Type: boolean
-# Default: no
-#
-#
-# If set, messages marked as deleted will be saved with the maildir
-# (T)rashed flag instead of unlinked. NOTE: this only applies
-# to maildir-style mailboxes. Setting it will have no effect on other
-# mailbox types.
-#
-#
-# set mark_old=yes
-#
-# Name: mark_old
-# Type: boolean
-# Default: yes
-#
-#
-# Controls whether or not mutt marks new unread
-# messages as old if you exit a mailbox without reading them.
-# With this option set, the next time you start mutt, the messages
-# will show up with an "O" next to them in the index menu,
-# indicating that they are old.
-#
-set mark_old=yes
-#
-# set markers=yes
-#
-# Name: markers
-# Type: boolean
-# Default: yes
-#
-#
-# Controls the display of wrapped lines in the internal pager. If set, a
-# ``+'' marker is displayed at the beginning of wrapped lines. Also see
-# the ``$smart_wrap'' variable.
-#
-set markers=no
-#
-# set mask="!^\\.[^.]"
-#
-# Name: mask
-# Type: regular expression
-# Default: "!^\\.[^.]"
-#
-#
-# A regular expression used in the file browser, optionally preceded by
-# the not operator ``!''. Only files whose names match this mask
-# will be shown. The match is always case-sensitive.
-#
-#
-# set mbox="~/mbox"
-#
-# Name: mbox
-# Type: path
-# Default: "~/mbox"
-#
-#
-# This specifies the folder into which read mail in your ``$spoolfile''
-# folder will be appended.
-#
-#
-# set mbox_type=mbox
-#
-# Name: mbox_type
-# Type: folder magic
-# Default: mbox
-#
-#
-# The default mailbox type used when creating new folders. May be any of
-# mbox, MMDF, MH and Maildir.
-#
-set mbox_type=Maildir
-#
-# set metoo=no
-#
-# Name: metoo
-# Type: boolean
-# Default: no
-#
-#
-# If unset, Mutt will remove your address (see the ``alternates''
-# command) from the list of recipients when replying to a message.
-#
-#
-# set menu_context=0
-#
-# Name: menu_context
-# Type: number
-# Default: 0
-#
-set menu_context=2
-#
-# This variable controls the number of lines of context that are given
-# when scrolling through menus. (Similar to ``$pager_context''.)
-#
-#
-# set menu_move_off=yes
-#
-# Name: menu_move_off
-# Type: boolean
-# Default: yes
-#
-#
-# When unset, the bottom entry of menus will never scroll up past
-# the bottom of the screen, unless there are less entries than lines.
-# When set, the bottom entry may move off the bottom.
-#
-#
-# set menu_scroll=no
-#
-# Name: menu_scroll
-# Type: boolean
-# Default: no
-#
-set menu_scroll=yes
-#
-# When set, menus will be scrolled up or down one line when you
-# attempt to move across a screen boundary. If unset, the screen
-# is cleared and the next or previous page of the menu is displayed
-# (useful for slow links to avoid many redraws).
-#
-#
-# set meta_key=no
-#
-# Name: meta_key
-# Type: boolean
-# Default: no
-#
-#
-# If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
-# set as if the user had pressed the ESC key and whatever key remains
-# after having the high bit removed. For example, if the key pressed
-# has an ASCII value of 0xf8, then this is treated as if the user had
-# pressed ESC then ``x''. This is because the result of removing the
-# high bit from ``0xf8'' is ``0x78'', which is the ASCII character
-# ``x''.
-#
-#
-# set mh_purge=no
-#
-# Name: mh_purge
-# Type: boolean
-# Default: no
-#
-#
-# When unset, mutt will mimic mh's behaviour and rename deleted messages
-# to ,<old file name> in mh folders instead of really deleting
-# them. If the variable is set, the message files will simply be
-# deleted.
-#
-#
-# set mh_seq_flagged="flagged"
-#
-# Name: mh_seq_flagged
-# Type: string
-# Default: "flagged"
-#
-#
-# The name of the MH sequence used for flagged messages.
-#
-#
-# set mh_seq_replied="replied"
-#
-# Name: mh_seq_replied
-# Type: string
-# Default: "replied"
-#
-#
-# The name of the MH sequence used to tag replied messages.
-#
-#
-# set mh_seq_unseen="unseen"
-#
-# Name: mh_seq_unseen
-# Type: string
-# Default: "unseen"
-#
-#
-# The name of the MH sequence used for unseen messages.
-#
-#
-# set mime_forward=no
-#
-# Name: mime_forward
-# Type: quadoption
-# Default: no
-#
-#
-# When set, the message you are forwarding will be attached as a
-# separate MIME part instead of included in the main body of the
-# message. This is useful for forwarding MIME messages so the receiver
-# can properly view the message as it was delivered to you. If you like
-# to switch between MIME and not MIME from mail to mail, set this
-# variable to ask-no or ask-yes.
-#
-# Also see ``$forward_decode'' and ``$mime_forward_decode''.
-#
-set mime_forward=ask-yes
-#
-# set mime_forward_decode=no
-#
-# Name: mime_forward_decode
-# Type: boolean
-# Default: no
-#
-#
-# Controls the decoding of complex MIME messages into text/plain when
-# forwarding a message while ``$mime_forward'' is set. Otherwise
-# ``$forward_decode'' is used instead.
-#
-#
-# set mime_forward_rest=yes
-#
-# Name: mime_forward_rest
-# Type: quadoption
-# Default: yes
-#
-#
-# When forwarding multiple attachments of a MIME message from the recvattach
-# menu, attachments which cannot be decoded in a reasonable manner will
-# be attached to the newly composed message if this option is set.
-#
-#
-# set pgp_mime_signature_filename="signature.asc"
-#
-# Name: pgp_mime_signature_filename
-# Type: string
-# Default: "signature.asc"
-#
-#
-# This option sets the filename used for signature parts in PGP/MIME
-# signed messages.
-#
-#set pgp_mime_signature_filename="digital_signature_gpg.asc"
-#
-# set pgp_mime_signature_description="Digital signature"
-#
-# Name: pgp_mime_signature_description
-# Type: string
-# Default: "Digital signature"
-#
-#set pgp_mime_signature_description="Digital signature (see http://martin-krafft.net/gpg/sig-policy/999bbcc4/current)"
-#
-# This option sets the Content-Description used for signature parts in
-# PGP/MIME signed messages.
-#
-#
-# set mix_entry_format="%4n %c %-16s %a"
-#
-# Name: mix_entry_format
-# Type: string
-# Default: "%4n %c %-16s %a"
-#
-#
-# This variable describes the format of a remailer line on the mixmaster
-# chain selection screen. The following printf-like sequences are
-# supported:
-#
-# %n The running number on the menu.
-# %c Remailer capabilities.
-# %s The remailer's short name.
-# %a The remailer's e-mail address.
-#
-#
-# set mixmaster="mixmaster"
-#
-# Name: mixmaster
-# Type: path
-# Default: "mixmaster"
-#
-#
-# This variable contains the path to the Mixmaster binary on your
-# system. It is used with various sets of parameters to gather the
-# list of known remailers, and to finally send a message through the
-# mixmaster chain.
-#
-# Note: On Debian systems, this option is set by default to
-# ``mixmaster-filter'' in /etc/Muttrc.
-#
-#
-# set move=ask-no
-#
-# Name: move
-# Type: quadoption
-# Default: ask-no
-#
-#
-# Controls whether or not Mutt will move read messages
-# from your spool mailbox to your ``$mbox'' mailbox, or as a result of
-# a ``mbox-hook'' command.
-#
-set move=no
-#
-# set message_cachedir=""
-#
-# Name: message_cachedir
-# Type: path
-# Default: ""
-#
-#
-# Set this to a directory and mutt will cache copies of messages from
-# your IMAP and POP servers here. You are free to remove entries at any
-# time, for instance if stale entries accumulate because you have
-# deleted messages with another mail client.
-#
-#
-# set message_cache_clean=no
-#
-# Name: message_cache_clean
-# Type: boolean
-# Default: no
-#
-#
-# If set, mutt will clean out obsolete entries from the cache when
-# the mailbox is synchronized. You probably only want to set it
-# every once in a while, since it can be a little slow.
-#
-#
-# set message_format="%s"
-#
-# Name: message_format
-# Type: string
-# Default: "%s"
-#
-#
-# This is the string displayed in the ``attachment'' menu for
-# attachments of type message/rfc822. For a full listing of defined
-# printf()-like sequences see the section on ``$index_format''.
-#
-#
-# set narrow_tree=no
-#
-# Name: narrow_tree
-# Type: boolean
-# Default: no
-#
-#
-# This variable, when set, makes the thread tree narrower, allowing
-# deeper threads to fit on the screen.
-#
-set narrow_tree=yes
-#
-# set net_inc=10
-#
-# Name: net_inc
-# Type: number
-# Default: 10
-#
-#
-# Operations that expect to transfer a large amount of data over the
-# network will update their progress every net_inc kilobytes.
-# If set to 0, no progress messages will be displayed.
-#
-# See also ``$read_inc'' and ``$write_inc''.
-#
-#
-# set pager="builtin"
-#
-# Name: pager
-# Type: path
-# Default: "builtin"
-#
-#
-# This variable specifies which pager you would like to use to view
-# messages. builtin means to use the builtin pager, otherwise this
-# variable should specify the pathname of the external pager you would
-# like to use.
-#
-# Using an external pager may have some disadvantages: Additional
-# keystrokes are necessary because you can't call mutt functions
-# directly from the pager, and screen resizes cause lines longer than
-# the screen width to be badly formatted in the help menu.
-#
-#
-# set pager_context=0
-#
-# Name: pager_context
-# Type: number
-# Default: 0
-#
-#
-# This variable controls the number of lines of context that are given
-# when displaying the next or previous page in the internal pager. By
-# default, Mutt will display the line after the last one on the screen
-# at the top of the next page (0 lines of context).
-#
-set pager_context=2
-#
-# set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)"
-#
-# Name: pager_format
-# Type: string
-# Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)"
-#
-#
-# This variable controls the format of the one-line message ``status''
-# displayed before each message in either the internal or an external
-# pager. The valid sequences are listed in the ``$index_format''
-# section.
-#
-set pager_format="<%a> %* %i (%P)"
-#
-# set pager_index_lines=0
-#
-# Name: pager_index_lines
-# Type: number
-# Default: 0
-#
-# ## SET BY A DEFAULT HOOK
-#
-# Determines the number of lines of a mini-index which is shown when in
-# the pager. The current message, unless near the top or bottom of the
-# folder, will be roughly one third of the way down this mini-index,
-# giving the reader the context of a few messages before and after the
-# message. This is useful, for example, to determine how many messages
-# remain to be read in the current thread. One of the lines is reserved
-# for the status bar from the index, so a pager_index_lines of 6
-# will only show 5 lines of the actual index. A value of 0 results in
-# no index being shown. If the number of messages in the current folder
-# is less than pager_index_lines, then the index will only use as
-# many lines as it needs.
-#
-set pager_index_lines=5
-#
-# set pager_stop=no
-#
-# Name: pager_stop
-# Type: boolean
-# Default: no
-#
-#
-# When set, the internal-pager will not move to the next message
-# when you are at the end of a message and invoke the next-page
-# function.
-#
-set pager_stop=yes
-#
-# set crypt_autosign=no
-#
-# Name: crypt_autosign
-# Type: boolean
-# Default: no
-#
-#
-# Setting this variable will cause Mutt to always attempt to
-# cryptographically sign outgoing messages. This can be overridden
-# by use of the pgp-menu, when signing is not required or
-# encryption is requested as well. If ``$smime_is_default'' is set,
-# then OpenSSL is used instead to create S/MIME messages and settings can
-# be overridden by use of the smime-menu.
-# (Crypto only)
-#
-set crypt_autosign=yes
-#
-# set crypt_autoencrypt=no
-#
-# Name: crypt_autoencrypt
-# Type: boolean
-# Default: no
-#
-#
-# Setting this variable will cause Mutt to always attempt to PGP
-# encrypt outgoing messages. This is probably only useful in
-# connection to the send-hook command. It can be overridden
-# by use of the pgp-menu, when encryption is not required or
-# signing is requested as well. IF ``$smime_is_default'' is set,
-# then OpenSSL is used instead to create S/MIME messages and
-# settings can be overridden by use of the smime-menu.
-# (Crypto only)
-#
-#
-# set pgp_ignore_subkeys=yes
-#
-# Name: pgp_ignore_subkeys
-# Type: boolean
-# Default: yes
-#
-#
-# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
-# the principal key will inherit the subkeys' capabilities. Unset this
-# if you want to play interesting key selection games.
-# (PGP only)
-#
-#
-# set crypt_replyencrypt=yes
-#
-# Name: crypt_replyencrypt
-# Type: boolean
-# Default: yes
-#
-#
-# If set, automatically PGP or OpenSSL encrypt replies to messages which are
-# encrypted.
-# (Crypto only)
-#
-#
-# set crypt_replysign=no
-#
-# Name: crypt_replysign
-# Type: boolean
-# Default: no
-#
-#
-# If set, automatically PGP or OpenSSL sign replies to messages which are
-# signed.
-#
-# Note: this does not work on messages that are encrypted
-# and signed!
-# (Crypto only)
-#
-set crypt_replysign=yes
-#
-# set crypt_replysignencrypted=no
-#
-# Name: crypt_replysignencrypted
-# Type: boolean
-# Default: no
-#
-#
-# If set, automatically PGP or OpenSSL sign replies to messages
-# which are encrypted. This makes sense in combination with
-# ``$crypt_replyencrypt'', because it allows you to sign all
-# messages which are automatically encrypted. This works around
-# the problem noted in ``$crypt_replysign'', that mutt is not able
-# to find out whether an encrypted message is also signed.
-# (Crypto only)
-#
-set crypt_replysignencrypted=yes
-#
-# set crypt_timestamp=yes
-#
-# Name: crypt_timestamp
-# Type: boolean
-# Default: yes
-#
-#
-# If set, mutt will include a time stamp in the lines surrounding
-# PGP or S/MIME output, so spoofing such lines is more difficult.
-# If you are using colors to mark these lines, and rely on these,
-# you may unset this setting.
-# (Crypto only)
-#
-#
-# set pgp_use_gpg_agent=no
-#
-# Name: pgp_use_gpg_agent
-# Type: boolean
-# Default: no
-#
-#
-# If set, mutt will use a possibly-running gpg-agent process.
-# (PGP only)
-#
-set pgp_use_gpg_agent=yes
-#
-# set crypt_verify_sig=yes
-#
-# Name: crypt_verify_sig
-# Type: quadoption
-# Default: yes
-#
-#
-# If ``yes'', always attempt to verify PGP or S/MIME signatures.
-# If ``ask'', ask whether or not to verify the signature.
-# If ``no'', never attempt to verify cryptographic signatures.
-# (Crypto only)
-#
-#
-# set smime_is_default=no
-#
-# Name: smime_is_default
-# Type: boolean
-# Default: no
-#
-#
-# The default behaviour of mutt is to use PGP on all auto-sign/encryption
-# operations. To override and to use OpenSSL instead this must be set.
-# However, this has no effect while replying, since mutt will automatically
-# select the same application that was used to sign/encrypt the original
-# message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
-# (S/MIME only)
-#
-#
-# set smime_ask_cert_label=yes
-#
-# Name: smime_ask_cert_label
-# Type: boolean
-# Default: yes
-#
-#
-# This flag controls whether you want to be asked to enter a label
-# for a certificate about to be added to the database or not. It is
-# set by default.
-# (S/MIME only)
-#
-#
-# set smime_decrypt_use_default_key=yes
-#
-# Name: smime_decrypt_use_default_key
-# Type: boolean
-# Default: yes
-#
-#
-# If set (default) this tells mutt to use the default key for decryption. Otherwise,
-# if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address
-# to determine the key to use. It will ask you to supply a key, if it can't find one.
-# (S/MIME only)
-#
-#
-# set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
-#
-# Name: pgp_entry_format
-# Type: string
-# Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
-#
-#
-# This variable allows you to customize the PGP key selection menu to
-# your personal taste. This string is similar to ``$index_format'', but
-# has its own set of printf()-like sequences:
-#
-# %n number
-# %k key id
-# %u user id
-# %a algorithm
-# %l key length
-# %f flags
-# %c capabilities
-# %t trust/validity of the key-uid association
-# %[<s>] date of the key where <s> is an strftime(3) expression
-#
-#
-# (PGP only)
-#
-#
-# set pgp_good_sign=""
-#
-# Name: pgp_good_sign
-# Type: regular expression
-# Default: ""
-#
-#
-# If you assign a text to this variable, then a PGP signature is only
-# considered verified if the output from $pgp_verify_command contains
-# the text. Use this variable if the exit code from the command is 0
-# even for bad signatures.
-# (PGP only)
-#
-#
-# set pgp_check_exit=yes
-#
-# Name: pgp_check_exit
-# Type: boolean
-# Default: yes
-#
-#
-# If set, mutt will check the exit code of the PGP subprocess when
-# signing or encrypting. A non-zero exit code means that the
-# subprocess failed.
-# (PGP only)
-#
-#
-# set pgp_long_ids=no
-#
-# Name: pgp_long_ids
-# Type: boolean
-# Default: no
-#
-#
-# If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs.
-# (PGP only)
-#
-#
-# set pgp_retainable_sigs=no
-#
-# Name: pgp_retainable_sigs
-# Type: boolean
-# Default: no
-#
-#
-# If set, signed and encrypted messages will consist of nested
-# multipart/signed and multipart/encrypted body parts.
-#
-# This is useful for applications like encrypted and signed mailing
-# lists, where the outer layer (multipart/encrypted) can be easily
-# removed, while the inner multipart/signed part is retained.
-# (PGP only)
-#
-set pgp_retainable_sigs=yes
-#
-# set pgp_autoinline=no
-#
-# Name: pgp_autoinline
-# Type: boolean
-# Default: no
-#
-#
-# This option controls whether Mutt generates old-style inline
-# (traditional) PGP encrypted or signed messages under certain
-# circumstances. This can be overridden by use of the pgp-menu,
-# when inline is not required.
-#
-# Note that Mutt might automatically use PGP/MIME for messages
-# which consist of more than a single MIME part. Mutt can be
-# configured to ask before sending PGP/MIME messages when inline
-# (traditional) would not work.
-# See also: ``$pgp_mime_auto''.
-#
-# Also note that using the old-style PGP message format is strongly
-# deprecated.
-# (PGP only)
-#
-#
-# set pgp_replyinline=no
-#
-# Name: pgp_replyinline
-# Type: boolean
-# Default: no
-#
-#
-# Setting this variable will cause Mutt to always attempt to
-# create an inline (traditional) message when replying to a
-# message which is PGP encrypted/signed inline. This can be
-# overridden by use of the pgp-menu, when inline is not
-# required. This option does not automatically detect if the
-# (replied-to) message is inline; instead it relies on Mutt
-# internals for previously checked/flagged messages.
-#
-# Note that Mutt might automatically use PGP/MIME for messages
-# which consist of more than a single MIME part. Mutt can be
-# configured to ask before sending PGP/MIME messages when inline
-# (traditional) would not work.
-# See also: ``$pgp_mime_auto''.
-#
-# Also note that using the old-style PGP message format is strongly
-# deprecated.
-# (PGP only)
-#
-#
-# set pgp_show_unusable=yes
-#
-# Name: pgp_show_unusable
-# Type: boolean
-# Default: yes
-#
-#
-# If set, mutt will display non-usable keys on the PGP key selection
-# menu. This includes keys which have been revoked, have expired, or
-# have been marked as ``disabled'' by the user.
-# (PGP only)
-#
-set pgp_show_unusable=no
-#
-# set pgp_sign_as=""
-#
-# Name: pgp_sign_as
-# Type: string
-# Default: ""
-#
-#
-# If you have more than one key pair, this option allows you to specify
-# which of your private keys to use. It is recommended that you use the
-# keyid form to specify your key (e.g., ``0x00112233'').
-# (PGP only)
-#
-set pgp_sign_as="0x9C9D6979AE941637"
-#
-# set pgp_strict_enc=yes
-#
-# Name: pgp_strict_enc
-# Type: boolean
-# Default: yes
-#
-#
-# If set, Mutt will automatically encode PGP/MIME signed messages as
-# quoted-printable. Please note that unsetting this variable may
-# lead to problems with non-verifyable PGP signatures, so only change
-# this if you know what you are doing.
-# (PGP only)
-#
-#
-# set pgp_timeout=300
-#
-# Name: pgp_timeout
-# Type: number
-# Default: 300
-#
-#
-# The number of seconds after which a cached passphrase will expire if
-# not used.
-# (PGP only)
-#
-#
-# set pgp_sort_keys=address
-#
-# Name: pgp_sort_keys
-# Type: sort order
-# Default: address
-#
-#
-# Specifies how the entries in the `pgp keys' menu are sorted. The
-# following are legal values:
-#
-# address sort alphabetically by user id
-# keyid sort alphabetically by key id
-# date sort by key creation date
-# trust sort by the trust of the key
-#
-#
-# If you prefer reverse order of the above values, prefix it with
-# `reverse-'.
-# (PGP only)
-#
-#
-# set pgp_mime_auto=ask-yes
-#
-# Name: pgp_mime_auto
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# This option controls whether Mutt will prompt you for
-# automatically sending a (signed/encrypted) message using
-# PGP/MIME when inline (traditional) fails (for any reason).
-#
-# Also note that using the old-style PGP message format is strongly
-# deprecated.
-# (PGP only)
-#
-#
-# set pgp_auto_decode=no
-#
-# Name: pgp_auto_decode
-# Type: boolean
-# Default: no
-#
-#
-# If set, mutt will automatically attempt to decrypt traditional PGP
-# messages whenever the user performs an operation which ordinarily would
-# result in the contents of the message being operated on. For example,
-# if the user displays a pgp-traditional message which has not been manually
-# checked with the check-traditional-pgp function, mutt will automatically
-# check the message for traditional pgp.
-#
-set pgp_auto_decode=yes
-#
-# set pgp_decode_command=""
-#
-# Name: pgp_decode_command
-# Type: string
-# Default: ""
-#
-#
-# This format strings specifies a command which is used to decode
-# application/pgp attachments.
-#
-# The PGP command formats have their own set of printf-like sequences:
-#
-# %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
-# string otherwise. Note: This may be used with a %? construct.
-# %f Expands to the name of a file containing a message.
-# %s Expands to the name of a file containing the signature part
-# of a multipart/signed attachment when verifying it.
-# %a The value of $pgp_sign_as.
-# %r One or more key IDs.
-#
-#
-# For examples on how to configure these formats for the various versions
-# of PGP which are floating around, see the pgp*.rc and gpg.rc files in
-# the samples/ subdirectory which has been installed on your system
-# alongside the documentation.
-# (PGP only)
-#
-#
-# set pgp_getkeys_command=""
-#
-# Name: pgp_getkeys_command
-# Type: string
-# Default: ""
-#
-#
-# This command is invoked whenever mutt will need public key information.
-# %r is the only printf-like sequence used with this format.
-# (PGP only)
-#
-#
-# set pgp_verify_command=""
-#
-# Name: pgp_verify_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to verify PGP signatures.
-# (PGP only)
-#
-#
-# set pgp_decrypt_command=""
-#
-# Name: pgp_decrypt_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to decrypt a PGP encrypted message.
-# (PGP only)
-#
-#
-# set pgp_clearsign_command=""
-#
-# Name: pgp_clearsign_command
-# Type: string
-# Default: ""
-#
-#
-# This format is used to create a old-style "clearsigned" PGP
-# message. Note that the use of this format is strongly
-# deprecated.
-# (PGP only)
-#
-#
-# set pgp_sign_command=""
-#
-# Name: pgp_sign_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to create the detached PGP signature for a
-# multipart/signed PGP/MIME body part.
-# (PGP only)
-#
-#
-# set pgp_encrypt_sign_command=""
-#
-# Name: pgp_encrypt_sign_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to both sign and encrypt a body part.
-# (PGP only)
-#
-#
-# set pgp_encrypt_only_command=""
-#
-# Name: pgp_encrypt_only_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to encrypt a body part without signing it.
-# (PGP only)
-#
-#
-# set pgp_import_command=""
-#
-# Name: pgp_import_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to import a key from a message into
-# the user's public key ring.
-# (PGP only)
-#
-#
-# set pgp_export_command=""
-#
-# Name: pgp_export_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to export a public key from the user's
-# key ring.
-# (PGP only)
-#
-#
-# set pgp_verify_key_command=""
-#
-# Name: pgp_verify_key_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to verify key information from the key selection
-# menu.
-# (PGP only)
-#
-#
-# set pgp_list_secring_command=""
-#
-# Name: pgp_list_secring_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to list the secret key ring's contents. The
-# output format must be analogous to the one used by
-# gpg --list-keys --with-colons.
-#
-# This format is also generated by the pgpring utility which comes
-# with mutt.
-# (PGP only)
-#
-#
-# set pgp_list_pubring_command=""
-#
-# Name: pgp_list_pubring_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to list the public key ring's contents. The
-# output format must be analogous to the one used by
-# gpg --list-keys --with-colons.
-#
-# This format is also generated by the pgpring utility which comes
-# with mutt.
-# (PGP only)
-#
-#
-# set forward_decrypt=yes
-#
-# Name: forward_decrypt
-# Type: boolean
-# Default: yes
-#
-#
-# Controls the handling of encrypted messages when forwarding a message.
-# When set, the outer layer of encryption is stripped off. This
-# variable is only used if ``$mime_forward'' is set and
-# ``$mime_forward_decode'' is unset.
-# (PGP only)
-#
-#
-# set smime_timeout=300
-#
-# Name: smime_timeout
-# Type: number
-# Default: 300
-#
-#
-# The number of seconds after which a cached passphrase will expire if
-# not used.
-# (S/MIME only)
-#
-#
-# set smime_encrypt_with=""
-#
-# Name: smime_encrypt_with
-# Type: string
-# Default: ""
-#
-#
-# This sets the algorithm that should be used for encryption.
-# Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128".
-# If unset "3des" (TripleDES) is used.
-# (S/MIME only)
-#
-#
-# set smime_keys=""
-#
-# Name: smime_keys
-# Type: path
-# Default: ""
-#
-#
-# Since there is no pubring/secring as with PGP, mutt has to handle
-# storage ad retrieval of keys/certs by itself. This is very basic right now,
-# and stores keys and certificates in two different directories, both
-# named as the hash-value retrieved from OpenSSL. There is an index file
-# which contains mailbox-address keyid pair, and which can be manually
-# edited. This one points to the location of the private keys.
-# (S/MIME only)
-#
-set smime_keys="~/.smime/keys"
-#
-# set smime_ca_location=""
-#
-# Name: smime_ca_location
-# Type: path
-# Default: ""
-#
-#
-# This variable contains the name of either a directory, or a file which
-# contains trusted certificates for use with OpenSSL.
-# (S/MIME only)
-#
-# Note: On Debian systems, this defaults to the first existing file in
-# the following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt
-# /etc/ssl/certs/ca-certificates.crt.
-#
-#
-# set smime_certificates=""
-#
-# Name: smime_certificates
-# Type: path
-# Default: ""
-#
-#
-# Since there is no pubring/secring as with PGP, mutt has to handle
-# storage and retrieval of keys by itself. This is very basic right
-# now, and keys and certificates are stored in two different
-# directories, both named as the hash-value retrieved from
-# OpenSSL. There is an index file which contains mailbox-address
-# keyid pairs, and which can be manually edited. This one points to
-# the location of the certificates.
-# (S/MIME only)
-#
-set smime_certificates="~/.smime/certificates"
-#
-# set smime_decrypt_command=""
-#
-# Name: smime_decrypt_command
-# Type: string
-# Default: ""
-#
-#
-# This format string specifies a command which is used to decrypt
-# application/x-pkcs7-mime attachments.
-#
-# The OpenSSL command formats have their own set of printf-like sequences
-# similar to PGP's:
-#
-# %f Expands to the name of a file containing a message.
-# %s Expands to the name of a file containing the signature part
-# of a multipart/signed attachment when verifying it.
-# %k The key-pair specified with $smime_default_key
-# %c One or more certificate IDs.
-# %a The algorithm used for encryption.
-# %C CA location: Depending on whether $smime_ca_location
-# points to a directory or file, this expands to
-# "-CApath $smime_ca_location" or "-CAfile $smime_ca_location".
-#
-#
-# For examples on how to configure these formats, see the smime.rc in
-# the samples/ subdirectory which has been installed on your system
-# alongside the documentation.
-# (S/MIME only)
-#
-#
-# set smime_verify_command=""
-#
-# Name: smime_verify_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to verify S/MIME signatures of type multipart/signed.
-# (S/MIME only)
-#
-#
-# set smime_verify_opaque_command=""
-#
-# Name: smime_verify_opaque_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to verify S/MIME signatures of type
-# application/x-pkcs7-mime.
-# (S/MIME only)
-#
-#
-# set smime_sign_command=""
-#
-# Name: smime_sign_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to created S/MIME signatures of type
-# multipart/signed, which can be read by all mail clients.
-# (S/MIME only)
-#
-#
-# set smime_sign_opaque_command=""
-#
-# Name: smime_sign_opaque_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to created S/MIME signatures of type
-# application/x-pkcs7-signature, which can only be handled by mail
-# clients supporting the S/MIME extension.
-# (S/MIME only)
-#
-#
-# set smime_encrypt_command=""
-#
-# Name: smime_encrypt_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to create encrypted S/MIME messages.
-# (S/MIME only)
-#
-#
-# set smime_pk7out_command=""
-#
-# Name: smime_pk7out_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to extract PKCS7 structures of S/MIME signatures,
-# in order to extract the public X509 certificate(s).
-# (S/MIME only)
-#
-#
-# set smime_get_cert_command=""
-#
-# Name: smime_get_cert_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to extract X509 certificates from a PKCS7 structure.
-# (S/MIME only)
-#
-#
-# set smime_get_signer_cert_command=""
-#
-# Name: smime_get_signer_cert_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to extract only the signers X509 certificate from a S/MIME
-# signature, so that the certificate's owner may get compared to the
-# email's 'From'-field.
-# (S/MIME only)
-#
-#
-# set smime_import_cert_command=""
-#
-# Name: smime_import_cert_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to import a certificate via smime_keys.
-# (S/MIME only)
-#
-#
-# set smime_get_cert_email_command=""
-#
-# Name: smime_get_cert_email_command
-# Type: string
-# Default: ""
-#
-#
-# This command is used to extract the mail address(es) used for storing
-# X509 certificates, and for verification purposes (to check whether the
-# certificate was issued for the sender's mailbox).
-# (S/MIME only)
-#
-#
-# set smime_default_key=""
-#
-# Name: smime_default_key
-# Type: string
-# Default: ""
-#
-#
-# This is the default key-pair to use for signing. This must be set to the
-# keyid (the hash-value that OpenSSL generates) to work properly
-# (S/MIME only)
-#
-set smime_default_key="a350124a.0"
-#
-# set ssl_force_tls=no
-#
-# Name: ssl_force_tls
-# Type: boolean
-# Default: no
-#
-#
-# If this variable is set, Mutt will require that all connections
-# to remote servers be encrypted. Furthermore it will attempt to
-# negotiate TLS even if the server does not advertise the capability,
-# since it would otherwise have to abort the connection anyway. This
-# option supersedes ``$ssl_starttls''.
-#
-#
-# set ssl_starttls=yes
-#
-# Name: ssl_starttls
-# Type: quadoption
-# Default: yes
-#
-#
-# If set (the default), mutt will attempt to use STARTTLS on servers
-# advertising the capability. When unset, mutt will not attempt to
-# use STARTTLS regardless of the server's capabilities.
-#
-#
-# set certificate_file="~/.mutt_certificates"
-#
-# Name: certificate_file
-# Type: path
-# Default: "~/.mutt_certificates"
-#
-#
-# This variable specifies the file where the certificates you trust
-# are saved. When an unknown certificate is encountered, you are asked
-# if you accept it or not. If you accept it, the certificate can also
-# be saved in this file and further connections are automatically
-# accepted.
-#
-# You can also manually add CA certificates in this file. Any server
-# certificate that is signed with one of these CA certificates are
-# also automatically accepted.
-#
-# Example: set certificate_file=~/.mutt/certificates
-#
-#
-# set ssl_use_sslv3=yes
-#
-# Name: ssl_use_sslv3
-# Type: boolean
-# Default: yes
-#
-#
-# This variables specifies whether to attempt to use SSLv3 in the
-# SSL authentication process.
-#
-#
-# set ssl_use_tlsv1=yes
-#
-# Name: ssl_use_tlsv1
-# Type: boolean
-# Default: yes
-#
-#
-# This variables specifies whether to attempt to use TLSv1 in the
-# SSL authentication process.
-#
-#
-# set ssl_min_dh_prime_bits=0
-#
-# Name: ssl_min_dh_prime_bits
-# Type: number
-# Default: 0
-#
-#
-# This variable specifies the minimum acceptable prime size (in bits)
-# for use in any Diffie-Hellman key exchange. A value of 0 will use
-# the default from the GNUTLS library.
-#
-#
-# set ssl_ca_certificates_file=""
-#
-# Name: ssl_ca_certificates_file
-# Type: path
-# Default: ""
-#
-#
-# This variable specifies a file containing trusted CA certificates.
-# Any server certificate that is signed with one of these CA
-# certificates are also automatically accepted.
-#
-# Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
-#
-# Note: On Debian systems, this variable defaults to the example
-# mentioned. This file is managed by the ``ca-certificates'' package.
-#
-#
-# set pipe_split=no
-#
-# Name: pipe_split
-# Type: boolean
-# Default: no
-#
-#
-# Used in connection with the pipe-message command and the ``tag-
-# prefix'' operator. If this variable is unset, when piping a list of
-# tagged messages Mutt will concatenate the messages and will pipe them
-# as a single folder. When set, Mutt will pipe the messages one by one.
-# In both cases the messages are piped in the current sorted order,
-# and the ``$pipe_sep'' separator is added after each message.
-#
-#
-# set pipe_decode=no
-#
-# Name: pipe_decode
-# Type: boolean
-# Default: no
-#
-#
-# Used in connection with the pipe-message command. When unset,
-# Mutt will pipe the messages without any preprocessing. When set, Mutt
-# will weed headers and will attempt to PGP/MIME decode the messages
-# first.
-#
-set pipe_decode
-#
-# set pipe_sep="\n"
-#
-# Name: pipe_sep
-# Type: string
-# Default: "\n"
-#
-#
-# The separator to add between messages when piping a list of tagged
-# messages to an external Unix command.
-#
-#
-# set pop_authenticators=""
-#
-# Name: pop_authenticators
-# Type: string
-# Default: ""
-#
-#
-# This is a colon-delimited list of authentication methods mutt may
-# attempt to use to log in to an POP server, in the order mutt should
-# try them. Authentication methods are either 'user', 'apop' or any
-# SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'.
-# This parameter is case-insensitive. If this parameter is unset
-# (the default) mutt will try all available methods, in order from
-# most-secure to least-secure.
-#
-# Example: set pop_authenticators="digest-md5:apop:user"
-#
-#
-# set pop_auth_try_all=yes
-#
-# Name: pop_auth_try_all
-# Type: boolean
-# Default: yes
-#
-#
-# If set, Mutt will try all available methods. When unset, Mutt will
-# only fall back to other authentication methods if the previous
-# methods are unavailable. If a method is available but authentication
-# fails, Mutt will not connect to the POP server.
-#
-#
-# set pop_checkinterval=60
-#
-# Name: pop_checkinterval
-# Type: number
-# Default: 60
-#
-#
-# This variable configures how often (in seconds) mutt should look for
-# new mail in the currently selected mailbox if it is a POP mailbox.
-#
-#
-# set pop_delete=ask-no
-#
-# Name: pop_delete
-# Type: quadoption
-# Default: ask-no
-#
-#
-# If set, Mutt will delete successfully downloaded messages from the POP
-# server when using the fetch-mail function. When unset, Mutt will
-# download messages but also leave them on the POP server.
-#
-#
-# set pop_host=""
-#
-# Name: pop_host
-# Type: string
-# Default: ""
-#
-#
-# The name of your POP server for the fetch-mail function. You
-# can also specify an alternative port, username and password, ie:
-#
-# [pop[s]://][username[:password]@]popserver[:port]
-#
-#
-# set pop_last=no
-#
-# Name: pop_last
-# Type: boolean
-# Default: no
-#
-#
-# If this variable is set, mutt will try to use the "LAST" POP command
-# for retrieving only unread messages from the POP server when using
-# the fetch-mail function.
-#
-#
-# set pop_reconnect=ask-yes
-#
-# Name: pop_reconnect
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# Controls whether or not Mutt will try to reconnect to POP server if
-# the connection is lost.
-#
-#
-# set pop_user=""
-#
-# Name: pop_user
-# Type: string
-# Default: ""
-#
-#
-# Your login name on the POP server.
-#
-# This variable defaults to your user name on the local machine.
-#
-#
-# set pop_pass=""
-#
-# Name: pop_pass
-# Type: string
-# Default: ""
-#
-#
-# Specifies the password for your POP account. If unset, Mutt will
-# prompt you for your password when you open POP mailbox.
-# Warning: you should only use this option when you are on a
-# fairly secure machine, because the superuser can read your muttrc
-# even if you are the only one who can read the file.
-#
-#
-# set post_indent_string=""
-#
-# Name: post_indent_string
-# Type: string
-# Default: ""
-#
-#
-# Similar to the ``$attribution'' variable, Mutt will append this
-# string after the inclusion of a message which is being replied to.
-#
-#
-# set postpone=ask-yes
-#
-# Name: postpone
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# Controls whether or not messages are saved in the ``$postponed''
-# mailbox when you elect not to send immediately. Also see the
-# ``$recall'' variable.
-#
-#
-# set postponed="~/postponed"
-#
-# Name: postponed
-# Type: path
-# Default: "~/postponed"
-#
-#
-# Mutt allows you to indefinitely ``postpone sending a message'' which
-# you are editing. When you choose to postpone a message, Mutt saves it
-# in the mailbox specified by this variable. Also see the ``$postpone''
-# variable.
-#
-set postponed="=drafts"
-#
-# set preconnect=""
-#
-# Name: preconnect
-# Type: string
-# Default: ""
-#
-#
-# If set, a shell command to be executed if mutt fails to establish
-# a connection to the server. This is useful for setting up secure
-# connections, e.g. with ssh(1). If the command returns a nonzero
-# status, mutt gives up opening the server. Example:
-#
-# preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net
-# sleep 20 < /dev/null > /dev/null"
-#
-# Mailbox 'foo' on mailhost.net can now be reached
-# as '{localhost:1234}foo'.
-#
-# NOTE: For this example to work, you must be able to log in to the
-# remote machine without having to enter a password.
-#
-#
-# set print=ask-no
-#
-# Name: print
-# Type: quadoption
-# Default: ask-no
-#
-#
-# Controls whether or not Mutt really prints messages.
-# This is set to ask-no by default, because some people
-# accidentally hit ``p'' often (like me).
-#
-#
-# set print_command="lpr"
-#
-# Name: print_command
-# Type: path
-# Default: "lpr"
-#
-#
-# This specifies the command pipe that should be used to print messages.
-
-#set print_command="iconv -s -tlatin1//TRANSLIT | a2ps -=mail -Xlatin1 --title='%D{%Y.%m.%d.%H%M%S}-\$t2-\$t1' -B --borders=no --header='\$t2: \$t1' --left-footer='#?l!%E!#?v|%E|%s./%s#|!' --right-footer='#?l!%s./%s#!#?v|%s./%s#|%E|!' -cl100 -1qP cupspdf"
-set print_command="muttprint"
-
-#
-# set print_decode=yes
-#
-# Name: print_decode
-# Type: boolean
-# Default: yes
-#
-#
-# Used in connection with the print-message command. If this
-# option is set, the message is decoded before it is passed to the
-# external command specified by $print_command. If this option
-# is unset, no processing will be applied to the message when
-# printing it. The latter setting may be useful if you are using
-# some advanced printer filter which is able to properly format
-# e-mail messages for printing.
-#
-#
-# set print_split=no
-#
-# Name: print_split
-# Type: boolean
-# Default: no
-#
-#
-# Used in connection with the print-message command. If this option
-# is set, the command specified by $print_command is executed once for
-# each message which is to be printed. If this option is unset,
-# the command specified by $print_command is executed only once, and
-# all the messages are concatenated, with a form feed as the message
-# separator.
-#
-# Those who use the enscript(1) program's mail-printing mode will
-# most likely want to set this option.
-#
-set print_split=yes
-#
-# set prompt_after=yes
-#
-# Name: prompt_after
-# Type: boolean
-# Default: yes
-#
-#
-# If you use an external ``$pager'', setting this variable will
-# cause Mutt to prompt you for a command when the pager exits rather
-# than returning to the index menu. If unset, Mutt will return to the
-# index menu when the external pager exits.
-#
-#
-# set query_command=""
-#
-# Name: query_command
-# Type: path
-# Default: ""
-#
-#
-# This specifies the command that mutt will use to make external address
-# queries. The string should contain a %s, which will be substituted
-# with the query string the user types. See ``query'' for more
-# information.
-#
-set query_command="lbdbq"
-#
-# set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
-#
-# Name: query_format
-# Type: string
-# Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
-#
-#
-# This variable describes the format of the `query' menu. The
-# following printf-style sequences are understood:
-#
-# %a destination address
-# %c current entry number
-# %e extra information *
-# %n destination name
-# %t ``*'' if current entry is tagged, a space otherwise
-# %>X right justify the rest of the string and pad with "X"
-# %|X pad to the end of the line with "X"
-# %*X soft-fill with character "X" as pad
-#
-#
-# For an explanation of `soft-fill', see the ``$index_format'' documentation.
-#
-# * = can be optionally printed if nonzero, see the ``$status_format'' documentation.
-#
-#
-# set quit=yes
-#
-# Name: quit
-# Type: quadoption
-# Default: yes
-#
-#
-# This variable controls whether ``quit'' and ``exit'' actually quit
-# from mutt. If it set to yes, they do quit, if it is set to no, they
-# have no effect, and if it is set to ask-yes or ask-no, you are
-# prompted for confirmation when you try to quit.
-#
-#
-# set quote_regexp="^([ \t]*[|>:}#])+"
-#
-# Name: quote_regexp
-# Type: regular expression
-# Default: "^([ \t]*[|>:}#])+"
-#
-#
-# A regular expression used in the internal-pager to determine quoted
-# sections of text in the body of a message.
-#
-# Note: In order to use the quotedx patterns in the
-# internal pager, you need to set this to a regular expression that
-# matches exactly the quote characters at the beginning of quoted
-# lines.
-#
-#
-# set read_inc=10
-#
-# Name: read_inc
-# Type: number
-# Default: 10
-#
-#
-# If set to a value greater than 0, Mutt will display which message it
-# is currently on when reading a mailbox or when performing search actions
-# such as search and limit. The message is printed after
-# read_inc messages have been read or searched (e.g., if set to 25, Mutt will
-# print a message when it is at message 25, and then again when it gets
-# to message 50). This variable is meant to indicate progress when
-# reading or searching large mailboxes which may take some time.
-# When set to 0, only a single message will appear before the reading
-# the mailbox.
-#
-# Also see the ``$write_inc'' variable and the ``Tuning'' section of the
-# manual for performance considerations.
-#
-#
-# set read_only=no
-#
-# Name: read_only
-# Type: boolean
-# Default: no
-#
-#
-# If set, all folders are opened in read-only mode.
-#
-#
-# set realname=""
-#
-# Name: realname
-# Type: string
-# Default: ""
-#
-#
-# This variable specifies what "real" or "personal" name should be used
-# when sending messages.
-#
-# By default, this is the GECOS field from /etc/passwd. Note that this
-# variable will not be used when the user has set a real name
-# in the $from variable.
-#
-#
-# set recall=ask-yes
-#
-# Name: recall
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# Controls whether or not Mutt recalls postponed messages
-# when composing a new message. Also see ``$postponed''.
-#
-# Setting this variable to ``yes'' is not generally useful, and thus not
-# recommended.
-#
-set recall=no
-#
-# set record="~/sent"
-#
-# Name: record
-# Type: path
-# Default: "~/sent"
-#
-#
-# This specifies the file into which your outgoing messages should be
-# appended. (This is meant as the primary method for saving a copy of
-# your messages, but another way to do this is using the ``my_hdr''
-# command to create a Bcc: field with your email address in it.)
-#
-# The value of $record is overridden by the ``$force_name'' and
-# ``$save_name'' variables, and the ``fcc-hook'' command.
-#
-#set record="=outgoing"
-set record="=store"
-#
-# set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
-#
-# Name: reply_regexp
-# Type: regular expression
-# Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
-#
-#
-# A regular expression used to recognize reply messages when threading
-# and replying. The default value corresponds to the English "Re:" and
-# the German "Aw:".
-#
-set reply_regexp="^((re([-[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+"
-#
-# set reply_self=no
-#
-# Name: reply_self
-# Type: boolean
-# Default: no
-#
-#
-# If unset and you are replying to a message sent by you, Mutt will
-# assume that you want to reply to the recipients of that message rather
-# than to yourself.
-#
-#
-# set reply_to=ask-yes
-#
-# Name: reply_to
-# Type: quadoption
-# Default: ask-yes
-#
-#
-# If set, when replying to a message, Mutt will use the address listed
-# in the Reply-to: header as the recipient of the reply. If unset,
-# it will use the address in the From: header field instead. This
-# option is useful for reading a mailing list that sets the Reply-To:
-# header field to the list address and you want to send a private
-# message to the author of a message.
-#
-#
-# set resolve=yes
-#
-# Name: resolve
-# Type: boolean
-# Default: yes
-#
-#
-# When set, the cursor will be automatically advanced to the next
-# (possibly undeleted) message whenever a command that modifies the
-# current message is executed.
-#
-#
-# set reverse_alias=no
-#
-# Name: reverse_alias
-# Type: boolean
-# Default: no
-#
-#
-# This variable controls whether or not Mutt will display the "personal"
-# name from your aliases in the index menu if it finds an alias that
-# matches the message's sender. For example, if you have the following
-# alias:
-#
-# alias juser abd30425@somewhere.net (Joe User)
-#
-# and then you receive mail which contains the following header:
-#
-# From: abd30425@somewhere.net
-#
-# It would be displayed in the index menu as ``Joe User'' instead of
-# ``abd30425@somewhere.net.'' This is useful when the person's e-mail
-# address is not human friendly (like CompuServe addresses).
-#
-#
-# set reverse_name=no
-#
-# Name: reverse_name
-# Type: boolean
-# Default: no
-#
-#
-# It may sometimes arrive that you receive mail to a certain machine,
-# move the messages to another machine, and reply to some the messages
-# from there. If this variable is set, the default From: line of
-# the reply messages is built using the address where you received the
-# messages you are replying to if that address matches your
-# alternates. If the variable is unset, or the address that would be
-# used doesn't match your alternates, the From: line will use
-# your address on the current machine.
-#
-set reverse_name=yes
-#
-# set reverse_realname=yes
-#
-# Name: reverse_realname
-# Type: boolean
-# Default: yes
-#
-#
-# This variable fine-tunes the behaviour of the reverse_name feature.
-# When it is set, mutt will use the address from incoming messages as-is,
-# possibly including eventual real names. When it is unset, mutt will
-# override any such real names with the setting of the realname variable.
-#
-#
-# set rfc2047_parameters=no
-#
-# Name: rfc2047_parameters
-# Type: boolean
-# Default: no
-#
-#
-# When this variable is set, Mutt will decode RFC-2047-encoded MIME
-# parameters. You want to set this variable when mutt suggests you
-# to save attachments to files named like this:
-# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
-#
-# When this variable is set interactively, the change doesn't have
-# the desired effect before you have changed folders.
-#
-# Note that this use of RFC 2047's encoding is explicitly,
-# prohibited by the standard, but nevertheless encountered in the
-# wild.
-# Also note that setting this parameter will not have the effect
-# that mutt generates this kind of encoding. Instead, mutt will
-# unconditionally use the encoding specified in RFC 2231.
-#
-set rfc2047_parameters=yes
-#
-# set save_address=no
-#
-# Name: save_address
-# Type: boolean
-# Default: no
-#
-#
-# If set, mutt will take the sender's full address when choosing a
-# default folder for saving a mail. If ``$save_name'' or ``$force_name''
-# is set too, the selection of the fcc folder will be changed as well.
-#
-#
-# set save_empty=yes
-#
-# Name: save_empty
-# Type: boolean
-# Default: yes
-#
-#
-# When unset, mailboxes which contain no saved messages will be removed
-# when closed (the exception is ``$spoolfile'' which is never removed).
-# If set, mailboxes are never removed.
-#
-# Note: This only applies to mbox and MMDF folders, Mutt does not
-# delete MH and Maildir directories.
-#
-#
-# set save_history=0
-#
-# Name: save_history
-# Type: number
-# Default: 0
-#
-#
-# This variable controls the size of the history saved in the
-# ``$history_file'' file.
-#
-set save_history=100
-#
-# set save_name=no
-#
-# Name: save_name
-# Type: boolean
-# Default: no
-#
-#
-# This variable controls how copies of outgoing messages are saved.
-# When set, a check is made to see if a mailbox specified by the
-# recipient address exists (this is done by searching for a mailbox in
-# the ``$folder'' directory with the username part of the
-# recipient address). If the mailbox exists, the outgoing message will
-# be saved to that mailbox, otherwise the message is saved to the
-# ``$record'' mailbox.
-#
-# Also see the ``$force_name'' variable.
-#
-#
-# set score=yes
-#
-# Name: score
-# Type: boolean
-# Default: yes
-#
-#
-# When this variable is unset, scoring is turned off. This can
-# be useful to selectively disable scoring for certain folders when the
-# ``$score_threshold_delete'' variable and friends are used.
-#
-#
-# set score_threshold_delete=-1
-#
-# Name: score_threshold_delete
-# Type: number
-# Default: -1
-#
-#
-# Messages which have been assigned a score equal to or lower than the value
-# of this variable are automatically marked for deletion by mutt. Since
-# mutt scores are always greater than or equal to zero, the default setting
-# of this variable will never mark a message for deletion.
-#
-#
-# set score_threshold_flag=9999
-#
-# Name: score_threshold_flag
-# Type: number
-# Default: 9999
-#
-#
-# Messages which have been assigned a score greater than or equal to this
-# variable's value are automatically marked "flagged".
-#
-#
-# set score_threshold_read=-1
-#
-# Name: score_threshold_read
-# Type: number
-# Default: -1
-#
-#
-# Messages which have been assigned a score equal to or lower than the value
-# of this variable are automatically marked as read by mutt. Since
-# mutt scores are always greater than or equal to zero, the default setting
-# of this variable will never mark a message read.
-#
-#
-# set send_charset="us-ascii:iso-8859-1:utf-8"
-#
-# Name: send_charset
-# Type: string
-# Default: "us-ascii:iso-8859-1:utf-8"
-#
-#
-# A colon-delimited list of character sets for outgoing messages. Mutt will use the
-# first character set into which the text can be converted exactly.
-# If your ``$charset'' is not iso-8859-1 and recipients may not
-# understand UTF-8, it is advisable to include in the list an
-# appropriate widely used standard character set (such as
-# iso-8859-2, koi8-r or iso-2022-jp) either instead of or after
-# "iso-8859-1".
-#
-# In case the text cannot be converted into one of these exactly,
-# mutt uses ``$charset'' as a fallback.
-#
-#
-# set sendmail="/usr/sbin/sendmail -oem -oi"
-#
-# Name: sendmail
-# Type: path
-# Default: "/usr/sbin/sendmail -oem -oi"
-#
-#
-# Specifies the program and arguments used to deliver mail sent by Mutt.
-# Mutt expects that the specified program interprets additional
-# arguments as recipient addresses.
-#
-#set sendmail="/bin/true"
-set sendmail="$my_confdir/sendmail"
-#set sendmail="/usr/sbin/sendmail -oem -oi"
-#
-# set sendmail_wait=0
-#
-# Name: sendmail_wait
-# Type: number
-# Default: 0
-#
-#
-# Specifies the number of seconds to wait for the ``$sendmail'' process
-# to finish before giving up and putting delivery in the background.
-#
-# Mutt interprets the value of this variable as follows:
-# >0 number of seconds to wait for sendmail to finish before continuing
-# 0 wait forever for sendmail to finish
-# <0 always put sendmail in the background without waiting
-#
-#
-# Note that if you specify a value other than 0, the output of the child
-# process will be put in a temporary file. If there is some error, you
-# will be informed as to where to find the output.
-#
-#
-# set shell=""
-#
-# Name: shell
-# Type: path
-# Default: ""
-#
-#
-# Command to use when spawning a subshell. By default, the user's login
-# shell from /etc/passwd is used.
-#
-#
-# set sig_dashes=yes
-#
-# Name: sig_dashes
-# Type: boolean
-# Default: yes
-#
-#
-# If set, a line containing ``-- '' will be inserted before your
-# ``$signature''. It is strongly recommended that you not unset
-# this variable unless your ``signature'' contains just your name. The
-# reason for this is because many software packages use ``-- \n'' to
-# detect your signature. For example, Mutt has the ability to highlight
-# the signature in a different color in the builtin pager.
-#
-set sig_dashes=no
-#
-# set sig_on_top=no
-#
-# Name: sig_on_top
-# Type: boolean
-# Default: no
-#
-#
-# If set, the signature will be included before any quoted or forwarded
-# text. It is strongly recommended that you do not set this variable
-# unless you really know what you are doing, and are prepared to take
-# some heat from netiquette guardians.
-#
-#
-# set signature="~/.signature"
-#
-# Name: signature
-# Type: path
-# Default: "~/.signature"
-#
-#
-# Specifies the filename of your signature, which is appended to all
-# outgoing messages. If the filename ends with a pipe (``|''), it is
-# assumed that filename is a shell command and input should be read from
-# its stdout.
-#
-#set signature="~/.mutt/getsignature|"
-#
-# set simple_search="~f %s | ~s %s"
-#
-# Name: simple_search
-# Type: string
-# Default: "~f %s | ~s %s"
-#
-#
-# Specifies how Mutt should expand a simple search into a real search
-# pattern. A simple search is one that does not contain any of the ~
-# operators. See ``patterns'' for more information on search patterns.
-#
-# For example, if you simply type joe at a search or limit prompt, Mutt
-# will automatically expand it to the value specified by this variable.
-# For the default value it would be:
-#
-# ~f joe | ~s joe
-set simple_search="~L %s | ~s %s"
-#
-# set smart_wrap=yes
-#
-# Name: smart_wrap
-# Type: boolean
-# Default: yes
-#
-#
-# Controls the display of lines longer than the screen width in the
-# internal pager. If set, long lines are wrapped at a word boundary. If
-# unset, lines are simply wrapped at the screen edge. Also see the
-# ``$markers'' variable.
-#
-#
-# set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
-#
-# Name: smileys
-# Type: regular expression
-# Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
-#
-#
-# The pager uses this variable to catch some common false
-# positives of ``$quote_regexp'', most notably smileys in the beginning
-# of a line
-#
-#
-# set sleep_time=1
-#
-# Name: sleep_time
-# Type: number
-# Default: 1
-#
-#
-# Specifies time, in seconds, to pause while displaying certain informational
-# messages, while moving from folder to folder and after expunging
-# messages from the current folder. The default is to pause one second, so
-# a value of zero for this option suppresses the pause.
-#
-#
-# set smtp_authenticators=""
-#
-# Name: smtp_authenticators
-# Type: string
-# Default: ""
-#
-#
-# This is a colon-delimited list of authentication methods mutt may
-# attempt to use to log in to an SMTP server, in the order mutt should
-# try them. Authentication methods are any SASL mechanism, eg
-# ``digest-md5'', ``gssapi'' or ``cram-md5''.
-# This parameter is case-insensitive. If this parameter is unset
-# (the default) mutt will try all available methods, in order from
-# most-secure to least-secure.
-#
-# Example: set smtp_authenticators="digest-md5:cram-md5"
-#
-#
-# set smtp_pass=""
-#
-# Name: smtp_pass
-# Type: string
-# Default: ""
-#
-#
-# Specifies the password for your SMTP account. If unset, Mutt will
-# prompt you for your password when you first send mail via SMTP.
-# See ``smtp_url'' to configure mutt to send mail via SMTP.
-# Warning: you should only use this option when you are on a
-# fairly secure machine, because the superuser can read your muttrc even
-# if you are the only one who can read the file.
-#
-#
-# set smtp_url=""
-#
-# Name: smtp_url
-# Type: string
-# Default: ""
-#
-#
-# Defines the SMTP ``smart'' host where sent messages should relayed for
-# delivery. This should take the form of an SMTP URL, eg:
-#
-# smtp[s]://[user[:pass]@]host[:port]/
-#
-# Setting this variable overrides the value of the ``$sendmail''
-# variable.
-#
-#
-# set sort=date
-#
-# Name: sort
-# Type: sort order
-# Default: date
-#
-#
-# Specifies how to sort messages in the index menu. Valid values
-# are:
-#
-# date or date-sent
-# date-received
-# from
-# mailbox-order (unsorted)
-# score
-# size
-# spam
-# subject
-# threads
-# to
-#
-# You may optionally use the reverse- prefix to specify reverse sorting
-# order (example: set sort=reverse-date-sent).
-#
-# Note: On Debian systems, this option is set by default to
-# ``threads'' in /etc/Muttrc.
-#
-set sort=threads
-#
-# set sort_alias=alias
-#
-# Name: sort_alias
-# Type: sort order
-# Default: alias
-#
-#
-# Specifies how the entries in the `alias' menu are sorted. The
-# following are legal values:
-#
-# address (sort alphabetically by email address)
-# alias (sort alphabetically by alias name)
-# unsorted (leave in order specified in .muttrc)
-#
-#
-# set sort_aux=date
-#
-# Name: sort_aux
-# Type: sort order
-# Default: date
-#
-#
-# When sorting by threads, this variable controls how threads are sorted
-# in relation to other threads, and how the branches of the thread trees
-# are sorted. This can be set to any value that ``$sort'' can, except
-# threads (in that case, mutt will just use date-sent). You can also
-# specify the last- prefix in addition to the reverse- prefix, but last-
-# must come after reverse-. The last- prefix causes messages to be
-# sorted against its siblings by which has the last descendant, using
-# the rest of sort_aux as an ordering. For instance, set sort_aux=last-
-# date-received would mean that if a new message is received in a
-# thread, that thread becomes the last one displayed (or the first, if
-# you have set sort=reverse-threads.) Note: For reversed ``$sort''
-# order $sort_aux is reversed again (which is not the right thing to do,
-# but kept to not break any existing configuration setting).
-#
-set sort_aux=last-date-received
-#
-# set sort_browser=alpha
-#
-# Name: sort_browser
-# Type: sort order
-# Default: alpha
-#
-#
-# Specifies how to sort entries in the file browser. By default, the
-# entries are sorted alphabetically. Valid values:
-#
-# alpha (alphabetically)
-# date
-# size
-# unsorted
-#
-# You may optionally use the reverse- prefix to specify reverse sorting
-# order (example: set sort_browser=reverse-date).
-#
-#
-# set sort_re=yes
-#
-# Name: sort_re
-# Type: boolean
-# Default: yes
-#
-#
-# This variable is only useful when sorting by threads with
-# ``$strict_threads'' unset. In that case, it changes the heuristic
-# mutt uses to thread messages by subject. With sort_re set, mutt will
-# only attach a message as the child of another message by subject if
-# the subject of the child message starts with a substring matching the
-# setting of ``$reply_regexp''. With sort_re unset, mutt will attach
-# the message whether or not this is the case, as long as the
-# non-``$reply_regexp'' parts of both messages are identical.
-#
-#
-# set spam_separator=","
-#
-# Name: spam_separator
-# Type: string
-# Default: ","
-#
-#
-# ``spam_separator'' controls what happens when multiple spam headers
-# are matched: if unset, each successive header will overwrite any
-# previous matches value for the spam label. If set, each successive
-# match will append to the previous, using ``spam_separator'' as a
-# separator.
-#
-#
-# set spoolfile=""
-#
-# Name: spoolfile
-# Type: path
-# Default: ""
-#
-#
-# If your spool mailbox is in a non-default place where Mutt cannot find
-# it, you can specify its location with this variable. Mutt will
-# automatically set this variable to the value of the environment
-# variable $MAIL if it is not set.
-#
-set spoolfile="=inbox"
-#
-# set status_chars="-*%A"
-#
-# Name: status_chars
-# Type: string
-# Default: "-*%A"
-#
-#
-# Controls the characters used by the "%r" indicator in
-# ``$status_format''. The first character is used when the mailbox is
-# unchanged. The second is used when the mailbox has been changed, and
-# it needs to be resynchronized. The third is used if the mailbox is in
-# read-only mode, or if the mailbox will not be written when exiting
-# that mailbox (You can toggle whether to write changes to a mailbox
-# with the toggle-write operation, bound by default to "%"). The fourth
-# is used to indicate that the current folder has been opened in attach-
-# message mode (Certain operations like composing a new mail, replying,
-# forwarding, etc. are not permitted in this mode).
-#
-#
-# set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
-#
-# Name: status_format
-# Type: string
-# Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
-#
-#
-# Controls the format of the status line displayed in the index
-# menu. This string is similar to ``$index_format'', but has its own
-# set of printf()-like sequences:
-#
-# %b number of mailboxes with new mail *
-# %d number of deleted messages *
-# %f the full pathname of the current mailbox
-# %F number of flagged messages *
-# %h local hostname
-# %l size (in bytes) of the current mailbox *
-# %L size (in bytes) of the messages shown
-# (i.e., which match the current limit) *
-# %m the number of messages in the mailbox *
-# %M the number of messages shown (i.e., which match the current limit) *
-# %n number of new messages in the mailbox *
-# %o number of old unread messages *
-# %p number of postponed messages *
-# %P percentage of the way through the index
-# %r modified/read-only/won't-write/attach-message indicator,
-# according to $status_chars
-# %s current sorting mode ($sort)
-# %S current aux sorting method ($sort_aux)
-# %t number of tagged messages *
-# %u number of unread messages *
-# %v Mutt version string
-# %V currently active limit pattern, if any *
-# %>X right justify the rest of the string and pad with "X"
-# %|X pad to the end of the line with "X"
-# %*X soft-fill with character "X" as pad
-#
-#
-# For an explanation of `soft-fill', see the ``$index_format'' documentation.
-#
-# * = can be optionally printed if nonzero
-#
-# Some of the above sequences can be used to optionally print a string
-# if their value is nonzero. For example, you may only want to see the
-# number of flagged messages if such messages exist, since zero is not
-# particularly meaningful. To optionally print a string based upon one
-# of the above sequences, the following construct is used:
-#
-# %?<sequence_char>?<optional_string>?
-#
-# where sequence_char is a character from the table above, and
-# optional_string is the string you would like printed if
-# sequence_char is nonzero. optional_string may contain
-# other sequences as well as normal text, but you may not nest
-# optional strings.
-#
-# Here is an example illustrating how to optionally print the number of
-# new messages in a mailbox:
-# %?n?%n new messages.?
-#
-# You can also switch between two strings using the following construct:
-#
-# %?<sequence_char>?<if_string>&<else_string>?
-#
-# If the value of sequence_char is non-zero, if_string will
-# be expanded, otherwise else_string will be expanded.
-#
-# You can force the result of any printf-like sequence to be lowercase
-# by prefixing the sequence character with an underscore (_) sign.
-# For example, if you want to display the local hostname in lowercase,
-# you would use:
-# %_h
-#
-# If you prefix the sequence character with a colon (:) character, mutt
-# will replace any dots in the expansion by underscores. This might be helpful
-# with IMAP folders that don't like dots in folder names.
-#
-set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) "
-#
-# set status_on_top=no
-#
-# Name: status_on_top
-# Type: boolean
-# Default: no
-#
-#
-# Setting this variable causes the ``status bar'' to be displayed on
-# the first line of the screen rather than near the bottom.
-#
-#
-# set strict_threads=no
-#
-# Name: strict_threads
-# Type: boolean
-# Default: no
-#
-#
-# If set, threading will only make use of the ``In-Reply-To'' and
-# ``References'' fields when you ``$sort'' by message threads. By
-# default, messages with the same subject are grouped together in
-# ``pseudo threads.''. This may not always be desirable, such as in a
-# personal mailbox where you might have several unrelated messages with
-# the subject ``hi'' which will get grouped together. See also
-# ``$sort_re'' for a less drastic way of controlling this
-# behaviour.
-#
-set strict_threads=yes
-#
-# set suspend=yes
-#
-# Name: suspend
-# Type: boolean
-# Default: yes
-#
-#
-# When unset, mutt won't stop when the user presses the terminal's
-# susp key, usually ``control-Z''. This is useful if you run mutt
-# inside an xterm using a command like xterm -e mutt.
-#
-#
-# set text_flowed=no
-#
-# Name: text_flowed
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will generate text/plain; format=flowed attachments.
-# This format is easier to handle for some mailing software, and generally
-# just looks like ordinary text. To actually make use of this format's
-# features, you'll need support in your editor.
-#
-# Note that $indent_string is ignored when this option is set.
-#
-set text_flowed=yes
-#
-# set thread_received=no
-#
-# Name: thread_received
-# Type: boolean
-# Default: no
-#
-set thread_received=yes
-#
-# When set, mutt uses the date received rather than the date sent
-# to thread messages by subject.
-#
-#
-# set thorough_search=no
-#
-# Name: thorough_search
-# Type: boolean
-# Default: no
-#
-#
-# Affects the ~b and ~h search operations described in
-# section ``patterns'' above. If set, the headers and attachments of
-# messages to be searched are decoded before searching. If unset,
-# messages are searched as they appear in the folder.
-#
-set thorough_search=yes
-#
-# set tilde=no
-#
-# Name: tilde
-# Type: boolean
-# Default: no
-#
-#
-# When set, the internal-pager will pad blank lines to the bottom of the
-# screen with a tilde (~).
-#
-set tilde=yes
-#
-# set time_inc=0
-#
-# Name: time_inc
-# Type: number
-# Default: 0
-#
-#
-# Along with ``read_inc'', ``write_inc'', and ``net_inc'', this
-# variable controls the frequency with which progress updates are
-# displayed. It suppresses updates less than ``time_inc'' milliseconds
-# apart. This can improve throughput on systems with slow terminals,
-# or when running mutt on a remote system.
-#
-#
-# set timeout=600
-#
-# Name: timeout
-# Type: number
-# Default: 600
-#
-#
-# When Mutt is waiting for user input either idleing in menus or
-# in an interactive prompt, Mutt would block until input is
-# present. Depending on the context, this would prevent certain
-# operations from working, like checking for new mail or keeping
-# an IMAP connection alive.
-#
-# This variable controls how many seconds Mutt will at most wait
-# until it aborts waiting for input, performs these operations and
-# continues to wait for input.
-#
-# A value of zero or less will cause Mutt to never time out.
-#
-#
-# set tmpdir=""
-#
-# Name: tmpdir
-# Type: path
-# Default: ""
-#
-#
-# This variable allows you to specify where Mutt will place its
-# temporary files needed for displaying and composing messages. If
-# this variable is not set, the environment variable TMPDIR is
-# used. If TMPDIR is not set then "/tmp" is used.
-#
-#
-# set to_chars=" +TCFL"
-#
-# Name: to_chars
-# Type: string
-# Default: " +TCFL"
-#
-#
-# Controls the character used to indicate mail addressed to you. The
-# first character is the one used when the mail is NOT addressed to your
-# address (default: space). The second is used when you are the only
-# recipient of the message (default: +). The third is when your address
-# appears in the TO header field, but you are not the only recipient of
-# the message (default: T). The fourth character is used when your
-# address is specified in the CC header field, but you are not the only
-# recipient. The fifth character is used to indicate mail that was sent
-# by you. The sixth character is used to indicate when a mail
-# was sent to a mailing-list you subscribe to (default: L).
-#
-#
-# set trash=""
-#
-# Name: trash
-# Type: path
-# Default: ""
-#
-#
-# If set, this variable specifies the path of the trash folder where the
-# mails marked for deletion will be moved, instead of being irremediably
-# purged.
-#
-# NOTE: When you delete a message in the trash folder, it is really
-# deleted, so that you have a way to clean the trash.
-#
-#
-# set tunnel=""
-#
-# Name: tunnel
-# Type: string
-# Default: ""
-#
-#
-# Setting this variable will cause mutt to open a pipe to a command
-# instead of a raw socket. You may be able to use this to set up
-# preauthenticated connections to your IMAP/POP3 server. Example:
-#
-# tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
-#
-# NOTE: For this example to work you must be able to log in to the remote
-# machine without having to enter a password.
-#
-#
-# set use_8bitmime=no
-#
-# Name: use_8bitmime
-# Type: boolean
-# Default: no
-#
-#
-# Warning: do not set this variable unless you are using a version
-# of sendmail which supports the -B8BITMIME flag (such as sendmail
-# 8.8.x) or you may not be able to send mail.
-#
-# When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME
-# flag when sending 8-bit messages to enable ESMTP negotiation.
-#
-#
-# set use_domain=yes
-#
-# Name: use_domain
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will qualify all local addresses (ones without the
-# @host portion) with the value of ``$hostname''. If unset, no
-# addresses will be qualified.
-#
-#
-# set use_envelope_from=no
-#
-# Name: use_envelope_from
-# Type: boolean
-# Default: no
-#
-#
-# When set, mutt will set the envelope sender of the message.
-# If ``$envelope_from_address'' is set, it will be used as the sender
-# address. If not, mutt will attempt to derive the sender from the
-# "From:" header.
-#
-# Note that this information is passed to sendmail command using the
-# "-f" command line switch. Therefore setting this option is not useful
-# if the ``$sendmail'' variable already contains "-f" or if the
-# executable pointed to by $sendmail doesn't support the "-f" switch.
-#
-set use_envelope_from=yes
-#
-# set use_from=yes
-#
-# Name: use_from
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will generate the `From:' header field when
-# sending messages. If unset, no `From:' header field will be
-# generated unless the user explicitly sets one using the ``my_hdr''
-# command.
-#
-#
-# set use_idn=yes
-#
-# Name: use_idn
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will show you international domain names decoded.
-# Note: You can use IDNs for addresses even if this is unset.
-# This variable only affects decoding.
-#
-#
-# set use_ipv6=yes
-#
-# Name: use_ipv6
-# Type: boolean
-# Default: yes
-#
-#
-# When set, Mutt will look for IPv6 addresses of hosts it tries to
-# contact. If this option is unset, Mutt will restrict itself to IPv4 addresses.
-# Normally, the default should work.
-#
-#
-# set user_agent=yes
-#
-# Name: user_agent
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will add a "User-Agent" header to outgoing
-# messages, indicating which version of mutt was used for composing
-# them.
-#
-#
-# set visual=""
-#
-# Name: visual
-# Type: path
-# Default: ""
-#
-#
-# Specifies the visual editor to invoke when the ~v command is
-# given in the builtin editor.
-#
-#
-# set wait_key=yes
-#
-# Name: wait_key
-# Type: boolean
-# Default: yes
-#
-#
-# Controls whether Mutt will ask you to press a key after shell-
-# escape, pipe-message, pipe-entry, print-message,
-# and print-entry commands.
-#
-# It is also used when viewing attachments with ``auto_view'', provided
-# that the corresponding mailcap entry has a needsterminal flag,
-# and the external program is interactive.
-#
-# When set, Mutt will always ask for a key. When unset, Mutt will wait
-# for a key only if the external command returned a non-zero status.
-#
-set wait_key=no
-#
-# set weed=yes
-#
-# Name: weed
-# Type: boolean
-# Default: yes
-#
-#
-# When set, mutt will weed headers when displaying, forwarding,
-# printing, or replying to messages.
-#
-#
-# set wrap=0
-#
-# Name: wrap
-# Type: number
-# Default: 0
-#
-#
-# When set to a positive value, mutt will wrap text at $wrap characters.
-# When set to a negative value, mutt will wrap text so that there are $wrap
-# characters of empty space on the right side of the terminal.
-#
-set wrap=-10
-#
-# set wrap_search=yes
-#
-# Name: wrap_search
-# Type: boolean
-# Default: yes
-#
-#
-# Controls whether searches wrap around the end of the mailbox.
-#
-# When set, searches will wrap around the first (or last) message. When
-# unset, searches will not wrap.
-#
-#
-# set wrapmargin=0
-#
-# Name: wrapmargin
-# Type: number
-# Default: 0
-#
-#
-# (DEPRECATED) Equivalent to setting wrap with a negative value.
-#
-#
-# set write_inc=10
-#
-# Name: write_inc
-# Type: number
-# Default: 10
-#
-#
-# When writing a mailbox, a message will be printed every
-# write_inc messages to indicate progress. If set to 0, only a
-# single message will be displayed before writing a mailbox.
-#
-# Also see the ``$read_inc'' variable.
-#
-#
-# set write_bcc=yes
-#
-# Name: write_bcc
-# Type: boolean
-# Default: yes
-#
-#
-# Controls whether mutt writes out the Bcc header when preparing
-# messages to be sent. Exim users may wish to unset this. If mutt
-# is set to deliver directly via SMTP (see ``$smtp_url''), this
-# option does nothing: mutt will never write out the BCC header
-# in this case.
-#
-# Note: On Debian systems, exim4 and postfix strip BCC headers by
-# default. The above warning applies to exim3 users, see /etc/Muttrc.
-#
-#
-# set xterm_icon="M%?n?AIL&ail?"
-#
-# Name: xterm_icon
-# Type: string
-# Default: "M%?n?AIL&ail?"
-#
-#
-# Controls the format of the icon title, as long as xterm_set_titles
-# is enabled. This string is identical in formatting to the one used by
-# ``$status_format''.
-#
-#
-# set xterm_set_titles=no
-#
-# Name: xterm_set_titles
-# Type: boolean
-# Default: no
-#
-#
-# Controls whether mutt sets the xterm title bar and icon name
-# (as long as you are in an appropriate terminal).
-#
-set xterm_set_titles=yes
-#
-# set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
-#
-# Name: xterm_title
-# Type: string
-# Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
-#
-#
-# Controls the format of the title bar of the xterm provided that
-# xterm_set_titles has been set. This string is identical in formatting
-# to the one used by ``$status_format''.
-#
-set xterm_title="mutt@%h [%?M?%M/?%m, n:%n]%?V? [%V]?"
-#
-
auto_view text/html application/ics text/calendar
#auto_view application/x-gunzip application/x-tar-gz application/x-tar application/x-gtar
#auto_view application/postscript
#alternative_order text/enriched text/plain text application/postscript image/*
mime_lookup application/octet-stream
-source $my_confdir/colours
-source $my_confdir/headers
-source $my_confdir/alternates
-source $my_confdir/keybindings
-source $my_confdir/lists
-source $my_confdir/spam
-source $my_confdir/hooks
+mailto_allow cc in-reply-to references subject body
set my_mutt_mailboxes = "$VARDIR/mutt/mailboxes"
source "test -f $my_mutt_mailboxes && cat $my_mutt_mailboxes|"
-#source "$my_confdir/list-mailboxes $folder $spoolfile|"
set alias_file="$my_confdir/aliases"
source "test -f $alias_file && cat $alias_file 2>/dev/null || echo unset alias_file|"
+source $my_confdir/colours
+source $my_confdir/headers
+source $my_confdir/alternates
+source $my_confdir/keybindings
+source $my_confdir/lists
+source $my_confdir/spam
+source $my_confdir/hooks
source $my_confdir/sidebar
+source $my_confdir/confvars
projects / etc / mutt.git / commitdiff