2. Change fold style |vim-markdown-change-fold-style|
3. Set header folding level |vim-markdown-set-header-folding-level|
4. Disable Default Key Mappings |vim-markdown-disable-default-key-mappings|
- 5. Syntax extensions |vim-markdown-syntax-extensions|
+ 5. Enable TOC window auto-fit |vim-markdown-enable-toc-window-auto-fit|
+ 6. Text emphasis restriction to single-lines
+ |vim-markdown-text-emphasis-restriction-to-single-lines|
+ 7. Syntax Concealing |vim-markdown-syntax-concealing|
+ 8. Fenced code block languages |vim-markdown-fenced-code-block-languages|
+ 9. Syntax extensions |vim-markdown-syntax-extensions|
1. LaTeX math |vim-markdown-latex-math|
- 2. YAML frontmatter |vim-markdown-yaml-frontmatter|
+ 2. YAML Front Matter |vim-markdown-yaml-front-matter|
+ 3. TOML Front Matter |vim-markdown-toml-front-matter|
+ 4. JSON Front Matter |vim-markdown-json-front-matter|
+ 10. Adjust new list item indent |vim-markdown-adjust-new-list-item-indent|
4. Mappings |vim-markdown-mappings|
5. Commands |vim-markdown-commands|
6. Credits |vim-markdown-credits|
>
let g:vim_markdown_folding_style_pythonic = 1
<
+Level 1 heading which is served as a document title is not folded.
+'g:vim_markdown_folding_level' setting is not active with this fold style.
+
+To prevent foldtext from being overridden, add the following to your '.vimrc':
+
+ let g:vim_markdown_override_foldtext = 0
+
-------------------------------------------------------------------------------
*vim-markdown-set-header-folding-level*
Set header folding level ~
<
You can also map them by yourself with '<Plug>' mappings.
+-------------------------------------------------------------------------------
+ *vim-markdown-enable-toc-window-auto-fit*
+Enable TOC window auto-fit ~
+
+Allow for the TOC window to auto-fit when it's possible for it to shrink. It
+never increases its default size (half screen), it only shrinks.
+>
+ let g:vim_markdown_toc_autofit = 1
+<
+-------------------------------------------------------------------------------
+ *vim-markdown-text-emphasis-restriction-to-single-lines*
+Text emphasis restriction to single-lines ~
+
+By default text emphasis works across multiple lines until a closing token is
+found. However, it's possible to restrict text emphasis to a single line (ie,
+for it to be applied a closing token must be found on the same line). To do so:
+>
+ let g:vim_markdown_emphasis_multiline = 0
+<
+-------------------------------------------------------------------------------
+ *vim-markdown-syntax-concealing*
+Syntax Concealing ~
+
+Concealing is set for some syntax.
+
+For example, conceal '[link text](link url)' as just 'link text'.
+Also, '_italic_' and '*italic*' will conceal to just 'italic'.
+Similarly '__bold__', '**bold**', '___italic bold___', and '***italic bold***'
+will conceal to 'bold', 'bold', 'italic bold', and 'italic bold' respectively.
+
+To enable conceal use Vim's standard conceal configuration.
+>
+ set conceallevel=2
+<
+To disable conceal regardless of 'conceallevel' setting, add the following to
+your '.vimrc':
+>
+ let g:vim_markdown_conceal = 0
+<
+-------------------------------------------------------------------------------
+ *vim-markdown-fenced-code-block-languages*
+Fenced code block languages ~
+
+You can use filetype name as fenced code block languages for syntax
+highlighting. If you want to use different name from filetype, you can add it
+in your '.vimrc' like so:
+>
+ let g:vim_markdown_fenced_languages = ['csharp=cs']
+<
+This will cause the following to be highlighted using the 'cs' filetype syntax.
+>
+ ```csharp
+ ...
+ ```
+<
+Default is "['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']".
+
-------------------------------------------------------------------------------
*vim-markdown-syntax-extensions*
Syntax extensions ~
let g:vim_markdown_math = 1
<
-------------------------------------------------------------------------------
- *vim-markdown-yaml-frontmatter*
-YAML frontmatter ~
+ *vim-markdown-yaml-front-matter*
+YAML Front Matter ~
-Highlight YAML frontmatter as used by Jekyll:
+Highlight YAML front matter as used by Jekyll or Hugo [7].
>
let g:vim_markdown_frontmatter = 1
<
+-------------------------------------------------------------------------------
+ *vim-markdown-toml-front-matter*
+TOML Front Matter ~
+
+Highlight TOML front matter as used by Hugo [7].
+
+TOML syntax highlight requires vim-toml [8].
+>
+ let g:vim_markdown_toml_frontmatter = 1
+<
+-------------------------------------------------------------------------------
+ *vim-markdown-json-front-matter*
+JSON Front Matter ~
+
+Highlight JSON front matter as used by Hugo [7].
+
+JSON syntax highlight requires vim-json [9].
+>
+ let g:vim_markdown_json_frontmatter = 1
+<
+-------------------------------------------------------------------------------
+ *vim-markdown-adjust-new-list-item-indent*
+Adjust new list item indent ~
+
+You can adjust a new list indent. For example, you insert a single line like
+below:
+>
+ * item1
+<
+Then if you type 'o' to insert new line in vim and type '* item2', the result
+will be:
+>
+ * item1
+ * item2
+<
+vim-markdown automatically insert the indent. By default, the number of spaces
+of indent is 4. If you'd like to change the number as 2, just write:
+>
+ let g:vim_markdown_new_list_item_indent = 2
+<
===============================================================================
*vim-markdown-mappings*
Mappings ~
The following work on normal and visual modes:
- *gx*
+ *vim-markdown-gx*
- 'gx': open the link under the cursor in the same browser as the standard
'gx' command. '<Plug>Markdown_OpenUrlUnderCursor'
<
Known limitation: does not work for links that span multiple lines.
- *]]*
+ *vim-markdown-ge*
+- 'ge': open the link under the cursor in Vim for editing. Useful for
+ relative markdown links. '<Plug>Markdown_EditUrlUnderCursor'
+
+ The rules for the cursor position are the same as the 'gx' command.
+
+ *vim-markdown-]]*
- ']]': go to next header. '<Plug>Markdown_MoveToNextHeader'
- *[[*
+ *vim-markdown-[[*
- '[[': go to previous header. Contrast with ']c'.
'<Plug>Markdown_MoveToPreviousHeader'
- *][*
+ *vim-markdown-][*
- '][': go to next sibling header if any.
'<Plug>Markdown_MoveToNextSiblingHeader'
- *[]*
+ *vim-markdown-[]*
- '[]': go to previous sibling header if any.
'<Plug>Markdown_MoveToPreviousSiblingHeader'
- *]c*
+ *vim-markdown-]c*
- ']c': go to Current header. '<Plug>Markdown_MoveToCurHeader'
- *]u*
+ *vim-markdown-]u*
- ']u': go to parent header (Up). '<Plug>Markdown_MoveToParentHeader'
This plugin follows the recommended Vim plugin mapping interface, so to change
*vim-markdown-commands*
Commands ~
+The following requires ':filetype plugin on'.
+
*:HeaderDecrease*
- ':HeaderDecrease':
range.
*:TableFormat*
-- ':TableFormat': Format the table under the cursor like this [7].
+- ':TableFormat': Format the table under the cursor like this [10].
- Requires Tabular [8].
+ Requires Tabular [11].
The input table _must_ already have a separator line as the second line of
the table. That line only needs to contain the correct pipes '|', nothing
- ':Toct': Same as ':Toc' but in a new tab.
*:Tocv*
-- ':Tocv': Same as ':Toc' for symmetry with ':Toch' and 'Tocv'.
+- ':Tocv': Same as ':Toc' for symmetry with ':Toch' and ':Tocv'.
===============================================================================
*vim-markdown-credits*
The main contributors of vim-markdown are:
- **Ben Williams** (A.K.A. **plasticboy**). The original developer of vim-
- markdown. Homepage [9].
+ markdown. Homepage [12].
If you feel that your name should be on this list, please make a pull request
listing your contributions.
[4] http://packages.qa.debian.org/v/vim-addon-manager.html
[5] https://github.com/plasticboy/vim-markdown/archive/master.tar.gz
[6] https://github.com/klen/python-mode
-[7] http://www.cirosantilli.com/markdown-style-guide/#tables
-[8] https://github.com/godlygeek/tabular
-[9] http://plasticboy.com/
+[7] https://gohugo.io/content/front-matter/
+[8] https://github.com/cespare/vim-toml
+[9] https://github.com/elzr/vim-json
+[10] http://www.cirosantilli.com/markdown-style-guide/#tables
+[11] https://github.com/godlygeek/tabular
+[12] http://plasticboy.com/
vim: ft=help
projects / etc / vim.git / blobdiff