_Black_ is a well-behaved Unix-style command-line tool:
-- it does nothing if no sources are passed to it;
+- it does nothing if it finds no sources to format;
- it will read from standard input and write to standard output if `-` is used as the
filename;
- it only outputs messages to users on standard error;
-- exits with code 0 unless an internal error occurred (or `--check` was used).
+- exits with code 0 unless an internal error occurred or a CLI option prompted it.
## Usage
### Command line options
-_Black_ has quite a few knobs these days, although _Black_ is opinionated so style
-configuration options are deliberately limited and rarely added. You can list them by
-running `black --help`.
+The CLI options of _Black_ can be displayed by expanding the view below or by running
+`black --help`. While _Black_ has quite a few knobs these days, it is still opinionated
+so style options are deliberately limited and rarely added.
<details>
-<summary>Help output</summary>
+<summary>CLI reference</summary>
```{program-output} black --help
</details>
+### Code input alternatives
+
+#### Standard Input
+
+_Black_ supports formatting code via stdin, with the result being printed to stdout.
+Just let _Black_ know with `-` as the path.
+
+```console
+$ echo "print ( 'hello, world' )" | black -
+print("hello, world")
+reformatted -
+All done! ✨ 🍰 ✨
+1 file reformatted.
+```
+
+**Tip:** if you need _Black_ to treat stdin input as a file passed directly via the CLI,
+use `--stdin-filename`. Useful to make sure _Black_ will respect the `--force-exclude`
+option on some editors that rely on using stdin.
+
+#### As a string
+
+You can also pass code as a string using the `-c` / `--code` option.
+
+```console
+$ black --code "print ( 'hello, world' )"
+print("hello, world")
+```
+
+### Writeback and reporting
+
+By default _Black_ reformats the files given and/or found in place. Sometimes you need
+_Black_ to just tell you what it _would_ do without actually rewriting the Python files.
+
+There's two variations to this mode that are independently enabled by their respective
+flags. Both variations can be enabled at once.
+
+#### Exit code
+
+Passing `--check` will make _Black_ exit with:
+
+- code 0 if nothing would change;
+- code 1 if some files would be reformatted; or
+- code 123 if there was an internal error
+
+```console
+$ black test.py --check
+All done! ✨ 🍰 ✨
+1 file would be left unchanged.
+$ echo $?
+0
+
+$ black test.py --check
+would reformat test.py
+Oh no! 💥 💔 💥
+1 file would be reformatted.
+$ echo $?
+1
+
+$ black test.py --check
+error: cannot format test.py: INTERNAL ERROR: Black produced code that is not equivalent to the source. Please report a bug on https://github.com/psf/black/issues. This diff might be helpful: /tmp/blk_kjdr1oog.log
+Oh no! 💥 💔 💥
+1 file would fail to reformat.
+$ echo $?
+123
+```
+
+#### Diffs
+
+Passing `--diff` will make _Black_ print out diffs that indicate what changes _Black_
+would've made. They are printed to stdout so capturing them is simple.
+
+If you'd like colored diffs, you can enable them with the `--color`.
+
+```console
+$ black test.py --diff
+--- test.py 2021-03-08 22:23:40.848954 +0000
++++ test.py 2021-03-08 22:23:47.126319 +0000
+@@ -1 +1 @@
+-print ( 'hello, world' )
++print("hello, world")
+would reformat test.py
+All done! ✨ 🍰 ✨
+1 file would be reformatted.
+```
+
+### Output verbosity
+
+_Black_ in general tries to produce the right amount of output, balancing between
+usefulness and conciseness. By default, _Black_ emits files modified and error messages,
+plus a short summary.
+
+```console
+$ black src/
+error: cannot format src/black_primer/cli.py: Cannot parse: 5:6: mport asyncio
+reformatted src/black_primer/lib.py
+reformatted src/blackd/__init__.py
+reformatted src/black/__init__.py
+Oh no! 💥 💔 💥
+3 files reformatted, 2 files left unchanged, 1 file failed to reformat.
+```
+
+Passing `-v` / `--verbose` will cause _Black_ to also emit messages about files that
+were not changed or were ignored due to exclusion patterns. If _Black_ is using a
+configuration file, a blue message detailing which one it is using will be emitted.
+
+```console
+$ black src/ -v
+Using configuration from /tmp/pyproject.toml.
+src/blib2to3 ignored: matches the --extend-exclude regular expression
+src/_black_version.py wasn't modified on disk since last run.
+src/black/__main__.py wasn't modified on disk since last run.
+error: cannot format src/black_primer/cli.py: Cannot parse: 5:6: mport asyncio
+reformatted src/black_primer/lib.py
+reformatted src/blackd/__init__.py
+reformatted src/black/__init__.py
+Oh no! 💥 💔 💥
+3 files reformatted, 2 files left unchanged, 1 file failed to reformat
+```
+
+Passing `-q` / `--quiet` will cause _Black_ to stop emitting all non-critial output.
+Error messages will still be emitted (which can silenced by `2>/dev/null`).
+
+```console
+$ black src/ -q
+error: cannot format src/black_primer/cli.py: Cannot parse: 5:6: mport asyncio
+```
+
+### Versions
+
+You can check the version of _Black_ you have installed using the `--version` flag.
+
+```console
+$ black --version
+black, version 22.10.0
+```
+
+An option to require a specific version to be running is also provided.
+
+```console
+$ black --required-version 21.9b0 -c "format = 'this'"
+format = "this"
+$ black --required-version 31.5b2 -c "still = 'beta?!'"
+Oh no! 💥 💔 💥 The required version does not match the running version!
+```
+
+This is useful for example when running _Black_ in multiple environments that haven't
+necessarily installed the correct version. This option can be set in a configuration
+file for consistent results across environments.
+
## Configuration via a file
_Black_ is able to read project-specific default values for its command line options
[PEP 518](https://www.python.org/dev/peps/pep-0518/) defines `pyproject.toml` as a
configuration file to store build system requirements for Python projects. With the help
-of tools like [Poetry](https://python-poetry.org/) or
-[Flit](https://flit.readthedocs.io/en/latest/) it can fully replace the need for
-`setup.py` and `setup.cfg` files.
+of tools like [Poetry](https://python-poetry.org/),
+[Flit](https://flit.readthedocs.io/en/latest/), or
+[Hatch](https://hatch.pypa.io/latest/) it can fully replace the need for `setup.py` and
+`setup.cfg` files.
### Where _Black_ looks for the file
line-length = 88
target-version = ['py37']
include = '\.pyi?$'
+# 'extend-exclude' excludes files or directories in addition to the defaults
extend-exclude = '''
# A regex preceded with ^/ will apply only to files and directories
# in the root of the project.
-^/foo.py # exclude a file named foo.py in the root of the project (in addition to the defaults)
+(
+ ^/foo.py # exclude a file named foo.py in the root of the project
+ | .*_pb2.py # exclude autogenerated Protocol Buffer files anywhere in the project
+)
'''
```
projects / etc / vim.git / blobdiff