Syntax highlighting, matching rules and mappings for [the original Markdown](http://daringfireball.net/projects/markdown/) and extensions.
1. [Installation](#installation)
+1. [Basic usage](#basic-usage)
1. [Options](#options)
1. [Mappings](#mappings)
1. [Commands](#commands)
tar --strip=1 -zxf vim-markdown-master.tar.gz
```
+## Basic usage
+
+### Folding
+
+Folding is enabled for headers by default.
+
+The following commands are useful to open and close folds:
+
+- `zr`: reduces fold level throughout the buffer
+- `zR`: opens all folds
+- `zm`: increases fold level throughout the buffer
+- `zM`: folds everything all the way
+- `za`: open a fold your cursor is on
+- `zA`: open a fold your cursor is on recursively
+- `zc`: close a fold your cursor is on
+- `zC`: close a fold your cursor is on recursively
+
+[Options](#options) are available to disable folding or change folding style.
+
+Try `:help fold-expr` and `:help fold-commands` for details.
+
+### Concealing
+
+Concealing is set for some syntax such as bold, italic, code block and link.
+
+Concealing lets you conceal text with other text. The actual source text is not modified. If you put your cursor on the concealed line, the conceal goes away.
+
+[Options](#options) are available to disable or change concealing.
+
+Try `:help concealcursor` and `:help conceallevel` for details.
+
## Options
### Disable Folding
### Change fold style
-To fold in a style like [python-mode](https://github.com/klen/python-mode), add
-the following to your `.vimrc`:
+To fold in a style like [python-mode](https://github.com/klen/python-mode), add the following to your `.vimrc`:
```vim
let g:vim_markdown_folding_style_pythonic = 1
```
+Level 1 heading which is served as a document title is not folded.
+`g:vim_markdown_folding_level` setting is not active with this fold style.
+
+To prevent foldtext from being set add the following to your `.vimrc`:
+
+```vim
+let g:vim_markdown_override_foldtext = 0
+```
+
### Set header folding level
Folding level is a number between 1 and 6. By default, if not specified, it is set to 1.
### Text emphasis restriction to single-lines
-By default text emphasis works across multiple lines until a closing token is found. However, it's possible to restrict text emphasis to a single line (ie, for it to be applied a closing token must be found on the same line). To do so:
+By default text emphasis works across multiple lines until a closing token is found. However, it's possible to restrict text emphasis to a single line (i.e., for it to be applied a closing token must be found on the same line). To do so:
```vim
let g:vim_markdown_emphasis_multiline = 0
Concealing is set for some syntax.
For example, conceal `[link text](link url)` as just `link text`.
+Also, `_italic_` and `*italic*` will conceal to just _italic_.
+Similarly `__bold__`, `**bold**`, `___italic bold___`, and `***italic bold***`
+will conceal to just __bold__, **bold**, ___italic bold___, and ***italic bold*** respectively.
-To enable/disable conceal use Vim's standard conceal configuration.
+To enable conceal use Vim's standard conceal configuration.
```vim
set conceallevel=2
```
+To disable conceal regardless of `conceallevel` setting, add the following to your `.vimrc`:
+
+```vim
+let g:vim_markdown_conceal = 0
+```
+
+To disable math conceal with LaTeX math syntax enabled, add the following to your `.vimrc`:
+
+```vim
+let g:tex_conceal = ""
+let g:vim_markdown_math = 1
+```
+
+### Fenced code block languages
+
+You can use filetype name as fenced code block languages for syntax highlighting.
+If you want to use different name from filetype, you can add it in your `.vimrc` like so:
+
+```vim
+let g:vim_markdown_fenced_languages = ['csharp=cs']
+```
+
+This will cause the following to be highlighted using the `cs` filetype syntax.
+
+ ```csharp
+ ...
+ ```
+
+Default is `['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']`.
+
+### Follow named anchors
+
+This feature allows the `ge` command to follow named anchors in links of the form
+`file#anchor` or just `#anchor`, where file may omit the `.md` extension as
+usual. Two variables control its operation:
+
+```vim
+let g:vim_markdown_follow_anchor = 1
+```
+
+This tells vim-markdown whether to attempt to follow a named anchor in a link or
+not. When it is 1, and only if a link can be split in two parts by the pattern
+'#', then the first part is interpreted as the file and the second one as the
+named anchor. This also includes urls of the form `#anchor`, for which the first
+part is considered empty, meaning that the target file is the current one. After
+the file is opened, the anchor will be searched.
+
+Default is `0`.
+
+```vim
+let g:vim_markdown_anchorexpr = "'<<'.v:anchor.'>>'"
+```
+
+This expression will be evaluated substituting `v:anchor` with a quoted string
+that contains the anchor to visit. The result of the evaluation will become the
+real anchor to search in the target file. This is useful in order to convert
+anchors of the form, say, `my-section-title` to searches of the form `My Section
+Title` or `<<my-section-title>>`.
+
+Default is `''`.
+
### Syntax extensions
The following options control which syntax extensions will be turned on. They are off by default.
let g:vim_markdown_json_frontmatter = 1
```
+#### Strikethrough
+
+Strikethrough uses two tildes. `~~Scratch this.~~`
+
+```vim
+let g:vim_markdown_strikethrough = 1
+```
+
+### Adjust new list item indent
+
+You can adjust a new list indent. For example, you insert a single line like below:
+
+```
+* item1
+```
+
+Then if you type `o` to insert new line in vim and type `* item2`, the result will be:
+
+```
+* item1
+ * item2
+```
+
+vim-markdown automatically insert the indent. By default, the number of spaces of indent is 4. If you'd like to change the number as 2, just write:
+
+```vim
+let g:vim_markdown_new_list_item_indent = 2
+```
+
+### Do not require .md extensions for Markdown links
+
+If you want to have a link like this `[link text](link-url)` and follow it for editing in vim using the `ge` command, but have it open the file "link-url.md" instead of the file "link-url", then use this option:
+
+```vim
+let g:vim_markdown_no_extensions_in_markdown = 1
+```
+This is super useful for GitLab and GitHub wiki repositories.
+
+Normal behaviour would be that vim-markup required you to do this `[link text](link-url.md)`, but this is not how the Gitlab and GitHub wiki repositories work. So this option adds some consistency between the two.
+
+### Auto-write when following link
+
+If you follow a link like this `[link text](link-url)` using the `ge` shortcut, this option will automatically save any edits you made before moving you:
+
+```vim
+let g:vim_markdown_autowrite = 1
+```
+
+### Change default file extension
+
+If you would like to use a file extension other than `.md` you may do so using the `vim_markdown_auto_extension_ext` variable:
+
+```vim
+let g:vim_markdown_auto_extension_ext = 'txt'
+```
+
+### Do not automatically insert bulletpoints
+
+Automatically inserting bulletpoints can lead to problems when wrapping text
+(see issue #232 for details), so it can be disabled:
+
+```vim
+let g:vim_markdown_auto_insert_bullets = 0
+```
+
+In that case, you probably also want to set the new list item indent to 0 as
+well, or you will have to remove an indent each time you add a new list item:
+
+```vim
+let g:vim_markdown_new_list_item_indent = 0
+```
+
+### Change how to open new files
+
+By default when following a link the target file will be opened in your current buffer. This behavior can change if you prefer using splits or tabs by using the `vim_markdown_edit_url_in` variable. Possible values are `tab`, `vsplit`, `hsplit`, `current` opening in a new tab, vertical split, horizontal split, and current buffer respectively. Defaults to current buffer if not set:
+
+```vim
+let g:vim_markdown_edit_url_in = 'tab'
+```
+
## Mappings
The following work on normal and visual modes:
Known limitation: does not work for links that span multiple lines.
+- `ge`: open the link under the cursor in Vim for editing. Useful for relative markdown links. `<Plug>Markdown_EditUrlUnderCursor`
+
+ The rules for the cursor position are the same as the `gx` command.
+
- `]]`: go to next header. `<Plug>Markdown_MoveToNextHeader`
- `[[`: go to previous header. Contrast with `]c`. `<Plug>Markdown_MoveToPreviousHeader`
projects / etc / vim.git / blobdiff