+ Level 1 heading which is served as a document title is not folded.
+ `g:vim_markdown_folding_level` setting is not active with this fold style.
+
+- `g:vim_markdown_override_foldtext`
+
+ To prevent foldtext from being set add the following to your `.vimrc`:
+
+ let g:vim_markdown_override_foldtext = 0
+
+### Set header folding level
+
+- `g:vim_markdown_folding_level`
+
+ Folding level is a number between 1 and 6. By default, if not specified, it is set to 1.
+
+ let g:vim_markdown_folding_level = 6
+
+ Tip: it can be changed on the fly with:
+
+ :let g:vim_markdown_folding_level = 1
+ :edit
+
+### Disable Default Key Mappings
+
+- `g:vim_markdown_no_default_key_mappings`
+
+ Add the following line to your `.vimrc` to disable default key mappings:
+
+ let g:vim_markdown_no_default_key_mappings = 1
+
+ You can also map them by yourself with `<Plug>` mappings.
+
+### Enable TOC window auto-fit
+
+- `g:vim_markdown_toc_autofit`
+
+ Allow for the TOC window to auto-fit when it's possible for it to shrink.
+ It never increases its default size (half screen), it only shrinks.
+
+ let g:vim_markdown_toc_autofit = 1
+
+### Text emphasis restriction to single-lines
+
+- `g:vim_markdown_emphasis_multiline`
+
+ By default text emphasis works across multiple lines until a closing token is found. However, it's possible to restrict text emphasis to a single line (i.e., for it to be applied a closing token must be found on the same line). To do so:
+
+ let g:vim_markdown_emphasis_multiline = 0
+
+### Syntax Concealing
+
+- `g:vim_markdown_conceal`
+
+ Concealing is set for some syntax.
+
+ For example, conceal `[link text](link url)` as just `link text`.
+ Also, `_italic_` and `*italic*` will conceal to just _italic_.
+ Similarly `__bold__`, `**bold**`, `___italic bold___`, and `***italic bold***`
+ will conceal to just __bold__, **bold**, ___italic bold___, and ***italic bold*** respectively.
+
+ To enable conceal use Vim's standard conceal configuration.
+
+ set conceallevel=2
+
+ To disable conceal regardless of `conceallevel` setting, add the following to your `.vimrc`:
+
+ let g:vim_markdown_conceal = 0
+
+ To disable math conceal with LaTeX math syntax enabled, add the following to your `.vimrc`:
+
+ let g:tex_conceal = ""
+ let g:vim_markdown_math = 1
+
+- `g:vim_markdown_conceal_code_blocks`
+
+ Disabling conceal for code fences requires an additional setting:
+
+ let g:vim_markdown_conceal_code_blocks = 0
+
+### Fenced code block languages
+
+- `g:vim_markdown_fenced_languages`
+
+ You can use filetype name as fenced code block languages for syntax highlighting.
+ If you want to use different name from filetype, you can add it in your `.vimrc` like so:
+
+ let g:vim_markdown_fenced_languages = ['csharp=cs']
+
+ This will cause the following to be highlighted using the `cs` filetype syntax.
+
+ ```csharp
+ ...
+ ```
+
+ Default is `['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini']`.
+
+### Follow named anchors
+
+- `g:vim_markdown_follow_anchor`
+
+ This feature allows the `ge` command to follow named anchors in links of the form
+ `file#anchor` or just `#anchor`, where file may omit the `.md` extension as
+ usual. Two variables control its operation:
+
+ let g:vim_markdown_follow_anchor = 1
+
+ This tells vim-markdown whether to attempt to follow a named anchor in a link or
+ not. When it is 1, and only if a link can be split in two parts by the pattern
+ '#', then the first part is interpreted as the file and the second one as the
+ named anchor. This also includes urls of the form `#anchor`, for which the first
+ part is considered empty, meaning that the target file is the current one. After
+ the file is opened, the anchor will be searched.
+
+ Default is `0`.
+
+- `g:vim_markdown_anchorexpr`
+
+ let g:vim_markdown_anchorexpr = "'<<'.v:anchor.'>>'"
+
+ This expression will be evaluated substituting `v:anchor` with a quoted string
+ that contains the anchor to visit. The result of the evaluation will become the
+ real anchor to search in the target file. This is useful in order to convert
+ anchors of the form, say, `my-section-title` to searches of the form `My Section
+ Title` or `<<my-section-title>>`.
+
+ Default is `''`.
+
+### Syntax extensions
+
+The following options control which syntax extensions will be turned on. They are off by default.
+
+#### LaTeX math
+
+- `g:vim_markdown_math`
+
+ Used as `$x^2$`, `$$x^2$$`, escapable as `\$x\$` and `\$\$x\$\$`.
+
+ let g:vim_markdown_math = 1
+
+#### YAML Front Matter
+
+- `g:vim_markdown_frontmatter`
+
+ Highlight YAML front matter as used by Jekyll or [Hugo](https://gohugo.io/content/front-matter/).
+
+ let g:vim_markdown_frontmatter = 1
+
+#### TOML Front Matter
+
+- `g:vim_markdown_toml_frontmatter`
+
+ Highlight TOML front matter as used by [Hugo](https://gohugo.io/content/front-matter/).
+
+ TOML syntax highlight requires [vim-toml](https://github.com/cespare/vim-toml).
+
+ let g:vim_markdown_toml_frontmatter = 1
+
+#### JSON Front Matter
+
+- `g:vim_markdown_json_frontmatter`
+
+ Highlight JSON front matter as used by [Hugo](https://gohugo.io/content/front-matter/).
+
+ JSON syntax highlight requires [vim-json](https://github.com/elzr/vim-json).
+
+ let g:vim_markdown_json_frontmatter = 1
+
+#### Strikethrough
+
+- `g:vim_markdown_strikethrough`
+
+ Strikethrough uses two tildes. `~~Scratch this.~~`
+
+ let g:vim_markdown_strikethrough = 1
+
+### Adjust new list item indent
+
+- `g:vim_markdown_new_list_item_indent`
+
+ You can adjust a new list indent. For example, you insert a single line like below:
+
+ * item1
+
+ Then if you type `o` to insert new line in vim and type `* item2`, the result will be:
+
+ * item1
+ * item2
+
+ vim-markdown automatically insert the indent. By default, the number of spaces of indent is 4. If you'd like to change the number as 2, just write:
+
+ let g:vim_markdown_new_list_item_indent = 2
+
+### Do not require .md extensions for Markdown links
+
+- `g:vim_markdown_no_extensions_in_markdown`
+
+ If you want to have a link like this `[link text](link-url)` and follow it for editing in vim using the `ge` command, but have it open the file "link-url.md" instead of the file "link-url", then use this option:
+
+ let g:vim_markdown_no_extensions_in_markdown = 1
+
+ This is super useful for GitLab and GitHub wiki repositories.
+
+ Normal behaviour would be that vim-markup required you to do this `[link text](link-url.md)`, but this is not how the Gitlab and GitHub wiki repositories work. So this option adds some consistency between the two.
+
+### Auto-write when following link
+
+- `g:vim_markdown_autowrite`
+
+ If you follow a link like this `[link text](link-url)` using the `ge` shortcut, this option will automatically save any edits you made before moving you:
+
+ let g:vim_markdown_autowrite = 1
+
+### Change default file extension
+
+- `g:vim_markdown_auto_extension_ext`
+
+ If you would like to use a file extension other than `.md` you may do so using the `vim_markdown_auto_extension_ext` variable:
+
+ let g:vim_markdown_auto_extension_ext = 'txt'
+
+### Do not automatically insert bulletpoints
+
+- `g:vim_markdown_auto_insert_bullets`
+
+ Automatically inserting bulletpoints can lead to problems when wrapping text
+ (see issue #232 for details), so it can be disabled:
+
+ let g:vim_markdown_auto_insert_bullets = 0
+
+ In that case, you probably also want to set the new list item indent to 0 as
+ well, or you will have to remove an indent each time you add a new list item:
+
+ let g:vim_markdown_new_list_item_indent = 0
+
+### Change how to open new files
+
+- `g:vim_markdown_edit_url_in`
+
+ By default when following a link the target file will be opened in your current buffer. This behavior can change if you prefer using splits or tabs by using the `vim_markdown_edit_url_in` variable. Possible values are `tab`, `vsplit`, `hsplit`, `current` opening in a new tab, vertical split, horizontal split, and current buffer respectively. Defaults to current buffer if not set:
+
+ let g:vim_markdown_edit_url_in = 'tab'
projects / etc / vim.git / blobdiff