+### Empty lines
+
+*Black* avoids spurious vertical whitespace. This is in the spirit of
+PEP 8 which says that in-function vertical whitespace should only be
+used sparingly.
+
+*Black* will allow single empty lines inside functions, and single and
+double empty lines on module level left by the original editors, except
+when they're within parenthesized expressions. Since such expressions
+are always reformatted to fit minimal space, this whitespace is lost.
+
+It will also insert proper spacing before and after function definitions.
+It's one line before and after inner functions and two lines before and
+after module-level functions. *Black* will not put empty lines between
+function/class definitions and standalone comments that immediately precede
+the given function/class.
+
+
+### Trailing commas
+
+*Black* will add trailing commas to expressions that are split
+by comma where each element is on its own line. This includes function
+signatures.
+
+Unnecessary trailing commas are removed if an expression fits in one
+line. This makes it 1% more likely that your line won't exceed the
+allotted line length limit. Moreover, in this scenario, if you added
+another argument to your call, you'd probably fit it in the same line
+anyway. That doesn't make diffs any larger.
+
+One exception to removing trailing commas is tuple expressions with
+just one element. In this case *Black* won't touch the single trailing
+comma as this would unexpectedly change the underlying data type. Note
+that this is also the case when commas are used while indexing. This is
+a tuple in disguise: ```numpy_array[3, ]```.
+
+One exception to adding trailing commas is function signatures
+containing `*`, `*args`, or `**kwargs`. In this case a trailing comma
+is only safe to use on Python 3.6. *Black* will detect if your file is
+already 3.6+ only and use trailing commas in this situation. If you
+wonder how it knows, it looks for f-strings and existing use of trailing
+commas in function signatures that have stars in them. In other words,
+if you'd like a trailing comma in this situation and *Black* didn't
+recognize it was safe to do so, put it there manually and *Black* will
+keep it.
+
+### Strings
+
+*Black* prefers double quotes (`"` and `"""`) over single quotes (`'`
+and `'''`). It will replace the latter with the former as long as it
+does not result in more backslash escapes than before.
+
+*Black* also standardizes string prefixes, making them always lowercase.
+On top of that, if your code is already Python 3.6+ only or it's using
+the `unicode_literals` future import, *Black* will remove `u` from the
+string prefix as it is meaningless in those scenarios.
+
+The main reason to standardize on a single form of quotes is aesthetics.
+Having one kind of quotes everywhere reduces reader distraction.
+It will also enable a future version of *Black* to merge consecutive
+string literals that ended up on the same line (see
+[#26](https://github.com/ambv/black/issues/26) for details).
+
+Why settle on double quotes? They anticipate apostrophes in English
+text. They match the docstring standard described in PEP 257. An
+empty string in double quotes (`""`) is impossible to confuse with
+a one double-quote regardless of fonts and syntax highlighting used.
+On top of this, double quotes for strings are consistent with C which
+Python interacts a lot with.
+
+On certain keyboard layouts like US English, typing single quotes is
+a bit easier than double quotes. The latter requires use of the Shift
+key. My recommendation here is to keep using whatever is faster to type
+and let *Black* handle the transformation.
+
+### Line Breaks & Binary Operators
+
+*Black* will break a line before a binary operator when splitting a block
+of code over multiple lines. This is so that *Black* is compliant with the
+recent changes in the [PEP 8](https://www.python.org/dev/peps/pep-0008/#should-a-line-break-before-or-after-a-binary-operator)
+style guide, which emphasizes that this approach improves readability.
+
+This behaviour may raise ``W503 line break before binary operator`` warnings in
+style guide enforcement tools like Flake8. Since ``W503`` is not PEP 8 compliant,
+you should tell Flake8 to ignore these warnings.
+
+### Slices
+
+PEP 8 [recommends](https://www.python.org/dev/peps/pep-0008/#whitespace-in-expressions-and-statements)
+to treat ``:`` in slices as a binary operator with the lowest priority, and to
+leave an equal amount of space on either side, except if a parameter is omitted
+(e.g. ``ham[1 + 1 :]``). It also states that for extended slices, both ``:``
+operators have to have the same amount of spacing, except if a parameter is
+omitted (``ham[1 + 1 ::]``). *Black* enforces these rules consistently.
+
+This behaviour may raise ``E203 whitespace before ':'`` warnings in style guide
+enforcement tools like Flake8. Since ``E203`` is not PEP 8 compliant, you should
+tell Flake8 to ignore these warnings.
+
+### Parentheses
+
+Some parentheses are optional in the Python grammar. Any expression can
+be wrapped in a pair of parentheses to form an atom. There are a few
+interesting cases:
+
+- `if (...):`
+- `while (...):`
+- `for (...) in (...):`
+- `assert (...), (...)`
+- `from X import (...)`
+- assignments like:
+ - `target = (...)`
+ - `target: type = (...)`
+ - `some, *un, packing = (...)`
+ - `augmented += (...)`
+
+In those cases, parentheses are removed when the entire statement fits
+in one line, or if the inner expression doesn't have any delimiters to
+further split on. Otherwise, the parentheses are always added.
+
+
+## Editor integration
+
+### Emacs
+
+Use [proofit404/blacken](https://github.com/proofit404/blacken).
+
+
+### PyCharm
+
+1. Install `black`.
+
+ $ pip install black
+
+2. Locate your `black` installation folder.
+
+ On MacOS / Linux / BSD:
+
+ $ which black
+ /usr/local/bin/black # possible location
+
+ On Windows:
+
+ $ where black
+ %LocalAppData%\Programs\Python\Python36-32\Scripts\black.exe # possible location
+
+3. Open External tools in PyCharm with `File -> Settings -> Tools -> External Tools`.
+
+4. Click the + icon to add a new external tool with the following values:
+ - Name: Black
+ - Description: Black is the uncompromising Python code formatter.
+ - Program: <install_location_from_step_2>
+ - Arguments: $FilePath$
+
+5. Format the currently opened file by selecting `Tools -> External Tools -> black`.
+ - Alternatively, you can set a keyboard shortcut by navigating to `Preferences -> Keymap`.
+
+
+### Vim
+
+Commands and shortcuts:
+
+* `,=` or `:Black` to format the entire file (ranges not supported);
+* `:BlackUpgrade` to upgrade *Black* inside the virtualenv;
+* `:BlackVersion` to get the current version of *Black* inside the
+ virtualenv.
+
+Configuration:
+* `g:black_fast` (defaults to `0`)
+* `g:black_linelength` (defaults to `88`)
+* `g:black_virtualenv` (defaults to `~/.vim/black`)
+
+To install with [vim-plug](https://github.com/junegunn/vim-plug):
+
+```
+Plug 'ambv/black',
+```
+
+or with [Vundle](https://github.com/VundleVim/Vundle.vim):
+
+```
+Plugin 'ambv/black'
+```
+
+or you can copy the plugin from [plugin/black.vim](https://github.com/ambv/black/tree/master/plugin/black.vim).
+Let me know if this requires any changes to work with Vim 8's builtin
+`packadd`, or Pathogen, and so on.
+
+This plugin **requires Vim 7.0+ built with Python 3.6+ support**. It
+needs Python 3.6 to be able to run *Black* inside the Vim process which
+is much faster than calling an external command.
+
+On first run, the plugin creates its own virtualenv using the right
+Python version and automatically installs *Black*. You can upgrade it later
+by calling `:BlackUpgrade` and restarting Vim.
+
+If you need to do anything special to make your virtualenv work and
+install *Black* (for example you want to run a version from master),
+create a virtualenv manually and point `g:black_virtualenv` to it.
+The plugin will use it.
+
+**How to get Vim with Python 3.6?**
+On Ubuntu 17.10 Vim comes with Python 3.6 by default.
+On macOS with HomeBrew run: `brew install vim --with-python3`.
+When building Vim from source, use:
+`./configure --enable-python3interp=yes`. There's many guides online how
+to do this.
+
+
+### Visual Studio Code
+
+Use [joslarson.black-vscode](https://marketplace.visualstudio.com/items?itemName=joslarson.black-vscode).
+
+### SublimeText 3
projects / etc / vim.git / blobdiff