+++ /dev/null
-# Auto-generated using mkconf from manual.txt
-# on 2019-01-18 23:28:41
-#
-# Invoked as: ./mkconf confvars
-#
-
-# 3.1. abort_noattach
-#
-# Type: quadoption
-# Default: no
-#
-# When the body of the message matches $abort_noattach_regexp and there are no
-# attachments, this quadoption controls whether to abort sending the message.
-#
-set abort_noattach=ask-yes
-
-
-# 3.2. abort_noattach_regexp
-#
-# Type: regular expression
-# Default: “attach”
-#
-# Specifies a regular expression to match against the body of the message, to
-# determine if an attachment was mentioned but mistakenly forgotten. If it
-# matches, $abort_noattach will be consulted to determine if message sending will
-# be aborted.
-#
-# Like other regular expressions in Mutt, the search is case sensitive if the
-# pattern contains at least one upper case letter, and case insensitive
-# otherwise.
-#
-set abort_noattach_regexp='attach|beigefügt|angehängt|an(hang|lage)|screenshot|bildschirmphoto'
-#'attach(ing|ed|ment)?|included\W+(with|in)\W+th(is|e\W+(curr|pres)ent)\W+mail|an(geh(ä|=E4|=C3=A4)ngt|h(ä|=E4|=C3=A4)ngsel|bei)|bei(gef(ü|=FC|=C3=BC)gt|lage)|(im|siehe)\W+(anhang|beilage)|attach(e|er|(é|=E9|=C3=A9)e?s?|ement|ant)'
-
-
-# 3.3. abort_nosubject
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# If set to yes, when composing messages and no subject is given at the subject
-# prompt, composition will be aborted. If set to no, composing messages with no
-# subject given at the subject prompt will never be aborted.
-#
-
-
-# 3.4. abort_unmodified
-#
-# Type: quadoption
-# Default: yes
-#
-# If set to yes, composition will automatically abort after editing the message
-# body if no changes are made to the file (this check only happens after the
-# first edit of the file). When set to no, composition will never be aborted.
-#
-
-
-# 3.5. alias_file
-#
-# Type: path
-# Default: “~/.muttrc”
-#
-# The default file in which to save aliases created by the <create-alias>
-# function. Entries added to this file are encoded in the character set specified
-# by $config_charset if it is set or the current character set otherwise.
-#
-# Note: Mutt will not automatically source this file; you must explicitly use the
-# “source” command for it to be executed in case this option points to a
-# dedicated alias file.
-#
-# The default for this option is the currently used muttrc file, or “~/.muttrc”
-# if no user muttrc was found.
-#
-set alias_file="$my_confdir/aliases"
-
-
-# 3.6. alias_format
-#
-# Type: string
-# Default: “%4n %2f %t %-10a %r”
-#
-# Specifies the format of the data displayed for the “alias” menu. The following
-# printf(3)-style sequences are available:
-#
-# ┌──┬──────────────────────────────────────────────────────────────┐
-# │%a│alias name │
-# ├──┼──────────────────────────────────────────────────────────────┤
-# │%f│flags - currently, a “d” for an alias marked for deletion │
-# ├──┼──────────────────────────────────────────────────────────────┤
-# │%n│index number │
-# ├──┼──────────────────────────────────────────────────────────────┤
-# │%r│address which alias expands to │
-# ├──┼──────────────────────────────────────────────────────────────┤
-# │%t│character which indicates if the alias is tagged for inclusion│
-# └──┴──────────────────────────────────────────────────────────────┘
-#
-
-
-# 3.7. allow_8bit
-#
-# Type: boolean
-# Default: yes
-#
-# Controls whether 8-bit data is converted to 7-bit using either Quoted-
-# Printable or Base64 encoding when sending mail.
-#
-
-
-# 3.8. allow_ansi
-#
-# Type: boolean
-# Default: no
-#
-# Controls whether ANSI color codes in messages (and color tags in rich text
-# messages) are to be interpreted. Messages containing these codes are rare, but
-# if this option is set, their text will be colored accordingly. Note that this
-# may override your color choices, and even present a security problem, since a
-# message could include a line like
-#
-# [-- PGP output follows ...
-#
-# and give it the same color as your attachment color (see also $crypt_timestamp
-# ).
-#
-
-
-# 3.9. arrow_cursor
-#
-# Type: boolean
-# Default: no
-#
-# When set, an arrow (“->”) will be used to indicate the current entry in menus
-# instead of highlighting the whole line. On slow network or modem links this
-# will make response faster because there is less that has to be redrawn on the
-# screen when moving to the next or previous entries in the menu.
-#
-
-
-# 3.10. ascii_chars
-#
-# Type: boolean
-# Default: no
-#
-# If set, Mutt will use plain ASCII characters when displaying thread and
-# attachment trees, instead of the default ACS characters.
-#
-
-
-# 3.11. askbcc
-#
-# Type: boolean
-# Default: no
-#
-# If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients before
-# editing an outgoing message.
-#
-
-
-# 3.12. askcc
-#
-# Type: boolean
-# Default: no
-#
-# If set, Mutt will prompt you for carbon-copy (Cc) recipients before editing the
-# body of an outgoing message.
-#
-
-
-# 3.13. assumed_charset
-#
-# Type: string
-# Default: (empty)
-#
-# This variable is a colon-separated list of character encoding schemes for
-# messages without character encoding indication. Header field values and message
-# body content without character encoding indication would be assumed that they
-# are written in one of this list. By default, all the header fields and message
-# body without any charset indication are assumed to be in “us-ascii”.
-#
-# For example, Japanese users might prefer this:
-#
-# set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
-#
-# However, only the first content is valid for the message body.
-#
-
-
-# 3.14. attach_charset
-#
-# Type: string
-# Default: (empty)
-#
-# This variable is a colon-separated list of character encoding schemes for text
-# file attachments. Mutt uses this setting to guess which encoding files being
-# attached are encoded in to convert them to a proper character set given in
-# $send_charset.
-#
-# If unset, the value of $charset will be used instead. For example, the
-# following configuration would work for Japanese text handling:
-#
-# set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
-#
-# Note: for Japanese users, “iso-2022-*” must be put at the head of the value as
-# shown above if included.
-#
-
-
-# 3.15. attach_format
-#
-# Type: string
-# Default: “%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] ”
-#
-# This variable describes the format of the “attachment” menu. The following
-# printf(3)-style sequences are understood:
-#
-# ┌───┬─────────────────────────────────────────────────────────────────────────┐
-# │%C │charset │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%c │requires charset conversion (“n” or “c”) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%D │deleted flag │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%d │description (if none, falls back to %F) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%e │MIME content-transfer-encoding │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%F │filename in content-disposition header (if none, falls back to %f) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%f │filename │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%I │disposition (“I” for inline, “A” for attachment) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%m │major MIME type │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%M │MIME subtype │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%n │attachment number │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%Q │“Q”, if MIME part qualifies for attachment counting │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%s │size │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%t │tagged flag │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%T │graphic tree characters │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%u │unlink (=to delete) flag │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%X │number of qualifying MIME parts in this part and its children (please see│
-# │ │the “attachments” section for possible speed effects) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%>X│right justify the rest of the string and pad with character “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%|X│pad to the end of the line with character “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%*X│soft-fill with character “X” as pad │
-# └───┴─────────────────────────────────────────────────────────────────────────┘
-#
-# For an explanation of “soft-fill”, see the $index_format documentation.
-#
-
-
-# 3.16. attach_sep
-#
-# Type: string
-# Default: “n”
-#
-# The separator to add between attachments when operating (saving, printing,
-# piping, etc) on a list of tagged attachments.
-#
-
-
-# 3.17. attach_split
-#
-# Type: boolean
-# Default: yes
-#
-# If this variable is unset, when operating (saving, printing, piping, etc) on a
-# list of tagged attachments, Mutt will concatenate the attachments and will
-# operate on them as a single attachment. The $attach_sep separator is added
-# after each attachment. When set, Mutt will operate on the attachments one by
-# one.
-#
-
-
-# 3.18. attribution
-#
-# Type: string
-# Default: “On %d, %n wrote:”
-#
-# This is the string that will precede a message which has been included in a
-# reply. For a full listing of defined printf(3)-like sequences see the section
-# on $index_format.
-#
-set attribution="$my_attribution_en"
-
-
-# 3.19. attribution_locale
-#
-# Type: string
-# Default: (empty)
-#
-# The locale used by strftime(3) to format dates in the attribution string. Legal
-# values are the strings your system accepts for the locale environment variable
-# $LC_TIME.
-#
-# This variable is to allow the attribution date format to be customized by
-# recipient or folder using hooks. By default, Mutt will use your locale
-# environment, so there is no need to set this except to override that default.
-#
-
-
-# 3.20. auto_tag
-#
-# Type: boolean
-# Default: no
-#
-# When set, functions in the index menu which affect a message will be applied to
-# all tagged messages (if there are any). When unset, you must first use the
-# <tag-prefix> function (bound to “;” by default) to make the next function apply
-# to all tagged messages.
-#
-
-
-# 3.21. autoedit
-#
-# Type: boolean
-# Default: no
-#
-# When set along with $edit_headers, Mutt will skip the initial send-menu
-# (prompting for subject and recipients) and allow you to immediately begin
-# editing the body of your message. The send-menu may still be accessed once you
-# have finished editing the body of your message.
-#
-# Note: when this option is set, you cannot use send-hooks that depend on the
-# recipients when composing a new (non-reply) message, as the initial list of
-# recipients is empty.
-#
-# Also see $fast_reply.
-#
-set autoedit=yes
-
-
-# 3.22. beep
-#
-# Type: boolean
-# Default: yes
-#
-# When this variable is set, mutt will beep when an error occurs.
-#
-set beep=no
-
-
-# 3.23. beep_new
-#
-# Type: boolean
-# Default: no
-#
-# When this variable is set, mutt will beep whenever it prints a message
-# notifying you of new mail. This is independent of the setting of the $beep
-# variable.
-#
-
-
-# 3.24. bounce
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# Controls whether you will be asked to confirm bouncing messages. If set to yes
-# you don't get asked if you want to bounce a message. Setting this variable to
-# no is not generally useful, and thus not recommended, because you are unable to
-# bounce messages.
-#
-
-
-# 3.25. bounce_delivered
-#
-# Type: boolean
-# Default: yes
-#
-# When this variable is set, mutt will include Delivered-To headers when bouncing
-# messages. Postfix users may wish to unset this variable.
-#
-set bounce_delivered=no
-
-
-# 3.26. braille_friendly
-#
-# Type: boolean
-# Default: no
-#
-# When this variable is set, mutt will place the cursor at the beginning of the
-# current line in menus, even when the $arrow_cursor variable is unset, making it
-# easier for blind persons using Braille displays to follow these menus. The
-# option is unset by default because many visual terminals don't permit making
-# the cursor invisible.
-#
-
-
-# 3.27. browser_abbreviate_mailboxes
-#
-# Type: boolean
-# Default: yes
-#
-# When this variable is set, mutt will abbreviate mailbox names in the browser
-# mailbox list, using '~' and '=' shortcuts.
-#
-# The default "alpha" setting of $sort_browser uses locale-based sorting (using
-# strcoll(3)), which ignores some punctuation. This can lead to some situations
-# where the order doesn't make intuitive sense. In those cases, it may be
-# desirable to unset this variable.
-#
-
-
-# 3.28. certificate_file
-#
-# Type: path
-# Default: “~/.mutt_certificates”
-#
-# This variable specifies the file where the certificates you trust are saved.
-# When an unknown certificate is encountered, you are asked if you accept it or
-# not. If you accept it, the certificate can also be saved in this file and
-# further connections are automatically accepted.
-#
-# You can also manually add CA certificates in this file. Any server certificate
-# that is signed with one of these CA certificates is also automatically
-# accepted.
-#
-# Example:
-#
-# set certificate_file=~/.mutt/certificates
-#
-
-
-# 3.29. change_folder_next
-#
-# Type: boolean
-# Default: no
-#
-# When this variable is set, the <change-folder> function mailbox suggestion will
-# start at the next folder in your “mailboxes” list, instead of starting at the
-# first folder in the list.
-#
-
-
-# 3.30. charset
-#
-# Type: string
-# Default: (empty)
-#
-# Character set your terminal uses to display and enter textual data. It is also
-# the fallback for $send_charset.
-#
-# Upon startup Mutt tries to derive this value from environment variables such as
-# $LC_CTYPE or $LANG.
-#
-# Note: It should only be set in case Mutt isn't able to determine the character
-# set used correctly.
-#
-
-
-# 3.31. check_mbox_size
-#
-# Type: boolean
-# Default: no
-#
-# When this variable is set, mutt will use file size attribute instead of access
-# time when checking for new mail in mbox and mmdf folders.
-#
-# This variable is unset by default and should only be enabled when new mail
-# detection for these folder types is unreliable or doesn't work.
-#
-# Note that enabling this variable should happen before any “mailboxes”
-# directives occur in configuration files regarding mbox or mmdf folders because
-# mutt needs to determine the initial new mail status of such a mailbox by
-# performing a fast mailbox scan when it is defined. Afterwards the new mail
-# status is tracked by file size changes.
-#
-
-
-# 3.32. check_new
-#
-# Type: boolean
-# Default: yes
-#
-# Note: this option only affects maildir and MH style mailboxes.
-#
-# When set, Mutt will check for new mail delivered while the mailbox is open.
-# Especially with MH mailboxes, this operation can take quite some time since it
-# involves scanning the directory and checking each file to see if it has already
-# been looked at. If this variable is unset, no check for new mail is performed
-# while the mailbox is open.
-#
-
-
-# 3.33. collapse_unread
-#
-# Type: boolean
-# Default: yes
-#
-# When unset, Mutt will not collapse a thread if it contains any unread messages.
-#
-
-
-# 3.34. compose_format
-#
-# Type: string
-# Default: “-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-”
-#
-# Controls the format of the status line displayed in the “compose” menu. This
-# string is similar to $status_format, but has its own set of printf(3)-like
-# sequences:
-#
-# ┌──┬──────────────────────────────────────────────────┐
-# │%a│total number of attachments │
-# ├──┼──────────────────────────────────────────────────┤
-# │%h│local hostname │
-# ├──┼──────────────────────────────────────────────────┤
-# │%l│approximate size (in bytes) of the current message│
-# ├──┼──────────────────────────────────────────────────┤
-# │%v│Mutt version string │
-# └──┴──────────────────────────────────────────────────┘
-#
-# See the text describing the $status_format option for more information on how
-# to set $compose_format.
-#
-
-
-# 3.35. config_charset
-#
-# Type: string
-# Default: (empty)
-#
-# When defined, Mutt will recode commands in rc files from this encoding to the
-# current character set as specified by $charset and aliases written to
-# $alias_file from the current character set.
-#
-# Please note that if setting $charset it must be done before setting
-# $config_charset.
-#
-# Recoding should be avoided as it may render unconvertable characters as
-# question marks which can lead to undesired side effects (for example in regular
-# expressions).
-#
-
-
-# 3.36. confirmappend
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will prompt for confirmation when appending messages to an
-# existing mailbox.
-#
-set confirmappend=no
-
-
-# 3.37. confirmcreate
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will prompt for confirmation when saving messages to a mailbox
-# which does not yet exist before creating it.
-#
-
-
-# 3.38. connect_timeout
-#
-# Type: number
-# Default: 30
-#
-# Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this
-# many seconds if the connection is not able to be established. A negative value
-# causes Mutt to wait indefinitely for the connection attempt to succeed.
-#
-
-
-# 3.39. content_type
-#
-# Type: string
-# Default: “text/plain”
-#
-# Sets the default Content-Type for the body of newly composed messages.
-#
-set content_type="text/plain; markup=markdown"
-
-
-# 3.40. copy
-#
-# Type: quadoption
-# Default: yes
-#
-# This variable controls whether or not copies of your outgoing messages will be
-# saved for later references. Also see $record, $save_name, $force_name and “
-# fcc-hook”.
-#
-set copy=yes
-
-
-# 3.41. crypt_autoencrypt
-#
-# Type: boolean
-# Default: no
-#
-# Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing
-# messages. This is probably only useful in connection to the “send-hook”
-# command. It can be overridden by use of the pgp menu, when encryption is not
-# required or signing is requested as well. If $smime_is_default is set, then
-# OpenSSL is used instead to create S/MIME messages and settings can be
-# overridden by use of the smime menu instead. (Crypto only)
-#
-
-
-# 3.42. crypt_autopgp
-#
-# Type: boolean
-# Default: yes
-#
-# This variable controls whether or not mutt may automatically enable PGP
-# encryption/signing for messages. See also $crypt_autoencrypt,
-# $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.
-#
-
-
-# 3.43. crypt_autosign
-#
-# Type: boolean
-# Default: no
-#
-# Setting this variable will cause Mutt to always attempt to cryptographically
-# sign outgoing messages. This can be overridden by use of the pgp menu, when
-# signing is not required or encryption is requested as well. If
-# $smime_is_default is set, then OpenSSL is used instead to create S/MIME
-# messages and settings can be overridden by use of the smime menu instead of the
-# pgp menu. (Crypto only)
-#
-set crypt_autosign=no
-
-
-# 3.44. crypt_autosmime
-#
-# Type: boolean
-# Default: yes
-#
-# This variable controls whether or not mutt may automatically enable S/MIME
-# encryption/signing for messages. See also $crypt_autoencrypt,
-# $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and $smime_is_default.
-#
-set crypt_autosmime=no
-
-
-# 3.45. crypt_confirmhook
-#
-# Type: boolean
-# Default: yes
-#
-# If set, then you will be prompted for confirmation of keys when using the
-# crypt-hook command. If unset, no such confirmation prompt will be presented.
-# This is generally considered unsafe, especially where typos are concerned.
-#
-
-
-# 3.46. crypt_opportunistic_encrypt
-#
-# Type: boolean
-# Default: no
-#
-# Setting this variable will cause Mutt to automatically enable and disable
-# encryption, based on whether all message recipient keys can be located by Mutt.
-#
-# When this option is enabled, Mutt will enable/disable encryption each time the
-# TO, CC, and BCC lists are edited. If $edit_headers is set, Mutt will also do so
-# each time the message is edited.
-#
-# While this is set, encryption can't be manually enabled/disabled. The pgp or
-# smime menus provide a selection to temporarily disable this option for the
-# current message.
-#
-# If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for a message,
-# this option will be disabled for that message. It can be manually re-enabled in
-# the pgp or smime menus. (Crypto only)
-#
-set crypt_opportunistic_encrypt=no
-
-
-# 3.47. crypt_replyencrypt
-#
-# Type: boolean
-# Default: yes
-#
-# If set, automatically PGP or OpenSSL encrypt replies to messages which are
-# encrypted. (Crypto only)
-#
-
-
-# 3.48. crypt_replysign
-#
-# Type: boolean
-# Default: no
-#
-# If set, automatically PGP or OpenSSL sign replies to messages which are signed.
-#
-# Note: this does not work on messages that are encrypted and signed! (Crypto
-# only)
-#
-set crypt_replysign=yes
-
-
-# 3.49. crypt_replysignencrypted
-#
-# Type: boolean
-# Default: no
-#
-# If set, automatically PGP or OpenSSL sign replies to messages which are
-# encrypted. This makes sense in combination with $crypt_replyencrypt, because it
-# allows you to sign all messages which are automatically encrypted. This works
-# around the problem noted in $crypt_replysign, that mutt is not able to find out
-# whether an encrypted message is also signed. (Crypto only)
-#
-set crypt_replysignencrypted=yes
-
-
-# 3.50. crypt_timestamp
-#
-# Type: boolean
-# Default: yes
-#
-# If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME
-# output, so spoofing such lines is more difficult. If you are using colors to
-# mark these lines, and rely on these, you may unset this setting. (Crypto only)
-#
-
-
-# 3.51. crypt_use_gpgme
-#
-# Type: boolean
-# Default: no
-#
-# This variable controls the use of the GPGME-enabled crypto backends. If it is
-# set and Mutt was built with gpgme support, the gpgme code for S/MIME and PGP
-# will be used instead of the classic code. Note that you need to set this option
-# in .muttrc; it won't have any effect when used interactively.
-#
-# Note that the GPGME backend does not support creating old-style inline
-# (traditional) PGP encrypted or signed messages (see $pgp_autoinline).
-#
-
-
-# 3.52. crypt_use_pka
-#
-# Type: boolean
-# Default: no
-#
-# Controls whether mutt uses PKA (see http://www.g10code.de/docs/
-# pka-intro.de.pdf) during signature verification (only supported by the GPGME
-# backend).
-#
-set crypt_use_pka=yes
-
-
-# 3.53. crypt_verify_sig
-#
-# Type: quadoption
-# Default: yes
-#
-# If “yes”, always attempt to verify PGP or S/MIME signatures. If “ask-*”, ask
-# whether or not to verify the signature. If “no”, never attempt to verify
-# cryptographic signatures. (Crypto only)
-#
-
-
-# 3.54. date_format
-#
-# Type: string
-# Default: “!%a, %b %d, %Y at %I:%M:%S%p %Z”
-#
-# This variable controls the format of the date printed by the “%d” sequence in
-# $index_format. This is passed to the strftime(3) function to process the date,
-# see the man page for the proper syntax.
-#
-# Unless the first character in the string is a bang (“!”), the month and week
-# day names are expanded according to the locale. If the first character in the
-# string is a bang, the bang is discarded, and the month and week day names in
-# the rest of the string are expanded in the C locale (that is in US English).
-#
-set date_format="%F"
-
-
-# 3.55. default_hook
-#
-# Type: string
-# Default: “~f %s !~P | (~P ~C %s)”
-#
-# This variable controls how “message-hook”, “reply-hook”, “send-hook”, “
-# send2-hook”, “save-hook”, and “fcc-hook” will be interpreted if they are
-# specified with only a simple regexp, instead of a matching pattern. The hooks
-# are expanded when they are declared, so a hook will be interpreted according to
-# the value of this variable at the time the hook is declared.
-#
-# The default value matches if the message is either from a user matching the
-# regular expression given, or if it is from you (if the from address matches “
-# alternates”) and is to or cc'ed to a user matching the given regular
-# expression.
-#
-
-
-# 3.56. delete
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# Controls whether or not messages are really deleted when closing or
-# synchronizing a mailbox. If set to yes, messages marked for deleting will
-# automatically be purged without prompting. If set to no, messages marked for
-# deletion will be kept in the mailbox.
-#
-set delete=yes
-
-
-# 3.57. delete_untag
-#
-# Type: boolean
-# Default: yes
-#
-# If this option is set, mutt will untag messages when marking them for deletion.
-# This applies when you either explicitly delete a message, or when you save it
-# to another folder.
-#
-
-
-# 3.58. digest_collapse
-#
-# Type: boolean
-# Default: yes
-#
-# If this option is set, mutt's received-attachments menu will not show the
-# subparts of individual messages in a multipart/digest. To see these subparts,
-# press “v” on that menu.
-#
-
-
-# 3.59. display_filter
-#
-# Type: path
-# Default: (empty)
-#
-# When set, specifies a command used to filter messages. When a message is viewed
-# it is passed as standard input to $display_filter, and the filtered message is
-# read from the standard output.
-#
-
-
-# 3.60. dotlock_program
-#
-# Type: path
-# Default: “/usr/bin/mutt_dotlock”
-#
-# Contains the path of the mutt_dotlock(8) binary to be used by mutt.
-#
-
-
-# 3.61. dsn_notify
-#
-# Type: string
-# Default: (empty)
-#
-# This variable sets the request for when notification is returned. The string
-# consists of a comma separated list (no spaces!) of one or more of the
-# following: never, to never request notification, failure, to request
-# notification on transmission failure, delay, to be notified of message delays,
-# success, to be notified of successful transmission.
-#
-# Example:
-#
-# set dsn_notify="failure,delay"
-#
-# Note: when using $sendmail for delivery, you should not enable this unless you
-# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
-# -compatible interface supporting the -N option for DSN. For SMTP delivery, DSN
-# support is auto-detected so that it depends on the server whether DSN will be
-# used or not.
-#
-
-
-# 3.62. dsn_return
-#
-# Type: string
-# Default: (empty)
-#
-# This variable controls how much of your message is returned in DSN messages. It
-# may be set to either hdrs to return just the message header, or full to return
-# the full message.
-#
-# Example:
-#
-# set dsn_return=hdrs
-#
-# Note: when using $sendmail for delivery, you should not enable this unless you
-# are either using Sendmail 8.8.x or greater or a MTA providing a sendmail(1)
-# -compatible interface supporting the -R option for DSN. For SMTP delivery, DSN
-# support is auto-detected so that it depends on the server whether DSN will be
-# used or not.
-#
-
-
-# 3.63. duplicate_threads
-#
-# Type: boolean
-# Default: yes
-#
-# This variable controls whether mutt, when $sort is set to threads, threads
-# messages with the same Message-Id together. If it is set, it will indicate that
-# it thinks they are duplicates of each other with an equals sign in the thread
-# tree.
-#
-
-
-# 3.64. edit_headers
-#
-# Type: boolean
-# Default: no
-#
-# This option allows you to edit the header of your outgoing messages along with
-# the body of your message.
-#
-# Although the compose menu may have localized header labels, the labels passed
-# to your editor will be standard RFC 2822 headers, (e.g. To:, Cc:, Subject:).
-# Headers added in your editor must also be RFC 2822 headers, or one of the
-# pseudo headers listed in “edit-header”. Mutt will not understand localized
-# header labels, just as it would not when parsing an actual email.
-#
-# Note that changes made to the References: and Date: headers are ignored for
-# interoperability reasons.
-#
-set edit_headers=yes
-
-
-# 3.65. editor
-#
-# Type: path
-# Default: (empty)
-#
-# This variable specifies which editor is used by mutt. It defaults to the value
-# of the $VISUAL, or $EDITOR, environment variable, or to the string “vi” if
-# neither of those are set.
-#
-# The $editor string may contain a %s escape, which will be replaced by the name
-# of the file to be edited. If the %s escape does not appear in $editor, a space
-# and the name to be edited are appended.
-#
-# The resulting string is then executed by running
-#
-# sh -c 'string'
-#
-# where string is the expansion of $editor described above.
-#
-set editor="mailplate --edit --auto --keep-unknown"
-
-
-# 3.66. encode_from
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will quoted-printable encode messages when they contain the
-# string “From ” (note the trailing space) in the beginning of a line. This is
-# useful to avoid the tampering certain mail delivery and transport agents tend
-# to do with messages (in order to prevent tools from misinterpreting the line as
-# a mbox message separator).
-#
-
-
-# 3.67. entropy_file
-#
-# Type: path
-# Default: (empty)
-#
-# The file which includes random data that is used to initialize SSL library
-# functions.
-#
-
-
-# 3.68. envelope_from_address
-#
-# Type: e-mail address
-# Default: (empty)
-#
-# Manually sets the envelope sender for outgoing messages. This value is ignored
-# if $use_envelope_from is unset.
-#
-
-
-# 3.69. error_history
-#
-# Type: number
-# Default: 30
-#
-# This variable controls the size (in number of strings remembered) of the error
-# messages displayed by mutt. These can be shown with the <error-history>
-# function. The history is cleared each time this variable is set.
-#
-
-
-# 3.70. escape
-#
-# Type: string
-# Default: “~”
-#
-# Escape character to use for functions in the built-in editor.
-#
-
-
-# 3.71. fast_reply
-#
-# Type: boolean
-# Default: no
-#
-# When set, the initial prompt for recipients and subject are skipped when
-# replying to messages, and the initial prompt for subject is skipped when
-# forwarding messages.
-#
-# Note: this variable has no effect when the $autoedit variable is set.
-#
-
-
-# 3.72. fcc_attach
-#
-# Type: quadoption
-# Default: yes
-#
-# This variable controls whether or not attachments on outgoing messages are
-# saved along with the main body of your message.
-#
-set fcc_attach=yes
-
-
-# 3.73. fcc_clear
-#
-# Type: boolean
-# Default: no
-#
-# When this variable is set, FCCs will be stored unencrypted and unsigned, even
-# when the actual message is encrypted and/or signed. (PGP only)
-#
-
-
-# 3.74. flag_safe
-#
-# Type: boolean
-# Default: no
-#
-# If set, flagged messages cannot be deleted.
-#
-
-
-# 3.75. folder
-#
-# Type: path
-# Default: “~/Mail”
-#
-# Specifies the default location of your mailboxes. A “+” or “=” at the beginning
-# of a pathname will be expanded to the value of this variable. Note that if you
-# change this variable (from the default) value you need to make sure that the
-# assignment occurs before you use “+” or “=” for any other variables since
-# expansion takes place when handling the “mailboxes” command.
-#
-set folder="~/mail"
-
-
-# 3.76. folder_format
-#
-# Type: string
-# Default: “%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f”
-#
-# This variable allows you to customize the file browser display to your personal
-# taste. This string is similar to $index_format, but has its own set of printf
-# (3)-like sequences:
-#
-# ┌───┬─────────────────────────────────────────────────────────────────────────┐
-# │%C │current file number │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%d │date/time folder was last modified │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%D │date/time folder was last modified using $date_format. │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%f │filename (“/” is appended to directory names, “@” to symbolic links and “│
-# │ │*” to executable files) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%F │file permissions │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%g │group name (or numeric gid, if missing) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%l │number of hard links │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%m │number of messages in the mailbox * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%n │number of unread messages in the mailbox * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%N │N if mailbox has new mail, blank otherwise │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%s │size in bytes │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%t │“*” if the file is tagged, blank otherwise │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%u │owner name (or numeric uid, if missing) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%>X│right justify the rest of the string and pad with character “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%|X│pad to the end of the line with character “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%*X│soft-fill with character “X” as pad │
-# └───┴─────────────────────────────────────────────────────────────────────────┘
-#
-# For an explanation of “soft-fill”, see the $index_format documentation.
-#
-# * = can be optionally printed if nonzero
-#
-# %m, %n, and %N only work for monitored mailboxes. %m requires $mail_check_stats
-# to be set. %n requires $mail_check_stats to be set (except for IMAP mailboxes).
-#
-set folder_format='%t%N%2C %D %4s %f'
-
-# 3.77. followup_to
-#
-# Type: boolean
-# Default: yes
-#
-# Controls whether or not the “Mail-Followup-To:” header field is generated when
-# sending mail. When set, Mutt will generate this field when you are replying to
-# a known mailing list, specified with the “subscribe” or “lists” commands.
-#
-# This field has two purposes. First, preventing you from receiving duplicate
-# copies of replies to messages which you send to mailing lists, and second,
-# ensuring that you do get a reply separately for any messages sent to known
-# lists to which you are not subscribed.
-#
-# The header will contain only the list's address for subscribed lists, and both
-# the list address and your own email address for unsubscribed lists. Without
-# this header, a group reply to your message sent to a subscribed list will be
-# sent to both the list and your address, resulting in two copies of the same
-# email for you.
-#
-
-
-# 3.78. force_name
-#
-# Type: boolean
-# Default: no
-#
-# This variable is similar to $save_name, except that Mutt will store a copy of
-# your outgoing message by the username of the address you are sending to even if
-# that mailbox does not exist.
-#
-# Also see the $record variable.
-#
-
-
-# 3.79. forward_attribution_intro
-#
-# Type: string
-# Default: “----- Forwarded message from %f -----”
-#
-# This is the string that will precede a message which has been forwarded in the
-# main body of a message (when $mime_forward is unset). For a full listing of
-# defined printf(3)-like sequences see the section on $index_format. See also
-# $attribution_locale.
-#
-
-
-# 3.80. forward_attribution_trailer
-#
-# Type: string
-# Default: “----- End forwarded message -----”
-#
-# This is the string that will follow a message which has been forwarded in the
-# main body of a message (when $mime_forward is unset). For a full listing of
-# defined printf(3)-like sequences see the section on $index_format. See also
-# $attribution_locale.
-#
-
-
-# 3.81. forward_decode
-#
-# Type: boolean
-# Default: yes
-#
-# Controls the decoding of complex MIME messages into text/plain when forwarding
-# a message. The message header is also RFC2047 decoded. This variable is only
-# used, if $mime_forward is unset, otherwise $mime_forward_decode is used
-# instead.
-#
-
-
-# 3.82. forward_decrypt
-#
-# Type: boolean
-# Default: yes
-#
-# Controls the handling of encrypted messages when forwarding a message. When set
-# , the outer layer of encryption is stripped off. This variable is only used if
-# $mime_forward is set and $mime_forward_decode is unset. (PGP only)
-#
-
-
-# 3.83. forward_edit
-#
-# Type: quadoption
-# Default: yes
-#
-# This quadoption controls whether or not the user is automatically placed in the
-# editor when forwarding messages. For those who always want to forward with no
-# modification, use a setting of “no”.
-#
-
-
-# 3.84. forward_format
-#
-# Type: string
-# Default: “[%a: %s]”
-#
-# This variable controls the default subject when forwarding a message. It uses
-# the same format sequences as the $index_format variable.
-#
-set forward_format="(fwd) %s"
-
-
-# 3.85. forward_quote
-#
-# Type: boolean
-# Default: no
-#
-# When set, forwarded messages included in the main body of the message (when
-# $mime_forward is unset) will be quoted using $indent_string.
-#
-
-
-# 3.86. from
-#
-# Type: e-mail address
-# Default: (empty)
-#
-# When set, this variable contains a default from address. It can be overridden
-# using “my_hdr” (including from a “send-hook”) and $reverse_name. This variable
-# is ignored if $use_from is unset.
-#
-# This setting defaults to the contents of the environment variable $EMAIL.
-#
-set from='martin f krafft <madduck@madduck.net>'
-
-
-# 3.87. gecos_mask
-#
-# Type: regular expression
-# Default: “^[^,]*”
-#
-# A regular expression used by mutt to parse the GECOS field of a password entry
-# when expanding the alias. The default value will return the string up to the
-# first “,” encountered. If the GECOS field contains a string like “lastname,
-# firstname” then you should set it to “.*”.
-#
-# This can be useful if you see the following behavior: you address an e-mail to
-# user ID “stevef” whose full name is “Steve Franklin”. If mutt expands “stevef”
-# to “"Franklin" stevef@foo.bar” then you should set the $gecos_mask to a regular
-# expression that will match the whole name so mutt will expand “Franklin” to “
-# Franklin, Steve”.
-#
-
-
-# 3.88. hdrs
-#
-# Type: boolean
-# Default: yes
-#
-# When unset, the header fields normally added by the “my_hdr” command are not
-# created. This variable must be unset before composing a new message or replying
-# in order to take effect. If set, the user defined header fields are added to
-# every new message.
-#
-
-
-# 3.89. header
-#
-# Type: boolean
-# Default: no
-#
-# When set, this variable causes Mutt to include the header of the message you
-# are replying to into the edit buffer. The $weed setting applies.
-#
-
-
-# 3.90. header_cache
-#
-# Type: path
-# Default: (empty)
-#
-# This variable points to the header cache database. If pointing to a directory
-# Mutt will contain a header cache database file per folder, if pointing to a
-# file that file will be a single global header cache. By default it is unset so
-# no header caching will be used.
-#
-# Header caching can greatly improve speed when opening POP, IMAP MH or Maildir
-# folders, see “caching” for details.
-#
-set header_cache="~/.var/mutt/header_cache"
-
-
-# 3.91. header_cache_compress
-#
-# Type: boolean
-# Default: yes
-#
-# When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header cache
-# backend, this option determines whether the database will be compressed.
-# Compression results in database files roughly being one fifth of the usual
-# diskspace, but the decompression can result in a slower opening of cached
-# folder(s) which in general is still much faster than opening non header cached
-# folders.
-#
-set header_cache_compress=no
-
-
-# 3.92. header_cache_pagesize
-#
-# Type: string
-# Default: “16384”
-#
-# When mutt is compiled with either gdbm or bdb4 as the header cache backend,
-# this option changes the database page size. Too large or too small values can
-# waste space, memory, or CPU time. The default should be more or less optimal
-# for most use cases.
-#
-
-
-# 3.93. header_color_partial
-#
-# Type: boolean
-# Default: no
-#
-# When set, color header regexps behave like color body regexps: color is applied
-# to the exact text matched by the regexp. When unset, color is applied to the
-# entire header.
-#
-# One use of this option might be to apply color to just the header labels.
-#
-# See “color” for more details.
-#
-
-
-# 3.94. help
-#
-# Type: boolean
-# Default: yes
-#
-# When set, help lines describing the bindings for the major functions provided
-# by each menu are displayed on the first line of the screen.
-#
-# Note: The binding will not be displayed correctly if the function is bound to a
-# sequence rather than a single keystroke. Also, the help line may not be updated
-# if a binding is changed while Mutt is running. Since this variable is primarily
-# aimed at new users, neither of these should present a major problem.
-#
-
-
-# 3.95. hidden_host
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will skip the host name part of $hostname variable when adding
-# the domain part to addresses. This variable does not affect the generation of
-# Message-IDs, and it will not lead to the cut-off of first-level domains.
-#
-
-
-# 3.96. hide_limited
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will not show the presence of messages that are hidden by
-# limiting, in the thread tree.
-#
-
-
-# 3.97. hide_missing
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will not show the presence of missing messages in the thread
-# tree.
-#
-
-
-# 3.98. hide_thread_subject
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will not show the subject of messages in the thread tree that
-# have the same subject as their parent or closest previously displayed sibling.
-#
-
-
-# 3.99. hide_top_limited
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will not show the presence of messages that are hidden by
-# limiting, at the top of threads in the thread tree. Note that when
-# $hide_limited is set, this option will have no effect.
-#
-
-
-# 3.100. hide_top_missing
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will not show the presence of missing messages at the top of
-# threads in the thread tree. Note that when $hide_missing is set, this option
-# will have no effect.
-#
-
-
-# 3.101. history
-#
-# Type: number
-# Default: 10
-#
-# This variable controls the size (in number of strings remembered) of the string
-# history buffer per category. The buffer is cleared each time the variable is
-# set.
-#
-
-
-# 3.102. history_file
-#
-# Type: path
-# Default: “~/.mutthistory”
-#
-# The file in which Mutt will save its history.
-#
-# Also see $save_history.
-#
-set history_file="~/.var/mutt/history"
-
-
-# 3.103. history_remove_dups
-#
-# Type: boolean
-# Default: no
-#
-# When set, all of the string history will be scanned for duplicates when a new
-# entry is added. Duplicate entries in the $history_file will also be removed
-# when it is periodically compacted.
-#
-
-
-# 3.104. honor_disposition
-#
-# Type: boolean
-# Default: no
-#
-# When set, Mutt will not display attachments with a disposition of “attachment”
-# inline even if it could render the part to plain text. These MIME parts can
-# only be viewed from the attachment menu.
-#
-# If unset, Mutt will render all MIME parts it can properly transform to plain
-# text.
-#
-
-
-# 3.105. honor_followup_to
-#
-# Type: quadoption
-# Default: yes
-#
-# This variable controls whether or not a Mail-Followup-To header is honored when
-# group-replying to a message.
-#
-
-
-# 3.106. hostname
-#
-# Type: string
-# Default: (empty)
-#
-# Specifies the fully-qualified hostname of the system mutt is running on
-# containing the host's name and the DNS domain it belongs to. It is used as the
-# domain part (after “@”) for local email addresses as well as Message-Id
-# headers.
-#
-# Its value is determined at startup as follows: the node's hostname is first
-# determined by the uname(3) function. The domain is then looked up using the
-# gethostname(2) and getaddrinfo(3) functions. If those calls are unable to
-# determine the domain, the full value returned by uname is used. Optionally,
-# Mutt can be compiled with a fixed domain name in which case a detected one is
-# not used.
-#
-# Also see $use_domain and $hidden_host.
-#
-
-
-# 3.107. idn_decode
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will show you international domain names decoded. Note: You can
-# use IDNs for addresses even if this is unset. This variable only affects
-# decoding. (IDN only)
-#
-
-
-# 3.108. idn_encode
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will encode international domain names using IDN. Unset this if
-# your SMTP server can handle newer (RFC 6531) UTF-8 encoded domains. (IDN only)
-#
-
-
-# 3.109. ignore_linear_white_space
-#
-# Type: boolean
-# Default: no
-#
-# This option replaces linear-white-space between encoded-word and text to a
-# single space to prevent the display of MIME-encoded “Subject:” field from being
-# divided into multiple lines.
-#
-
-
-# 3.110. ignore_list_reply_to
-#
-# Type: boolean
-# Default: no
-#
-# Affects the behavior of the <reply> function when replying to messages from
-# mailing lists (as defined by the “subscribe” or “lists” commands). When set, if
-# the “Reply-To:” field is set to the same value as the “To:” field, Mutt assumes
-# that the “Reply-To:” field was set by the mailing list to automate responses to
-# the list, and will ignore this field. To direct a response to the mailing list
-# when this option is set, use the <list-reply> function; <group-reply> will
-# reply to both the sender and the list.
-#
-set ignore_list_reply_to=yes
-
-
-# 3.111. imap_authenticators
-#
-# Type: string
-# Default: (empty)
-#
-# This is a colon-delimited list of authentication methods mutt may attempt to
-# use to log in to an IMAP server, in the order mutt should try them.
-# Authentication methods are either “login” or the right side of an IMAP “AUTH=
-# xxx” capability string, e.g. “digest-md5”, “gssapi” or “cram-md5”. This option
-# is case-insensitive. If it's unset (the default) mutt will try all available
-# methods, in order from most-secure to least-secure.
-#
-# Example:
-#
-# set imap_authenticators="gssapi:cram-md5:login"
-#
-# Note: Mutt will only fall back to other authentication methods if the previous
-# methods are unavailable. If a method is available but authentication fails,
-# mutt will not connect to the IMAP server.
-#
-
-
-# 3.112. imap_check_subscribed
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will fetch the set of subscribed folders from your server on
-# connection, and add them to the set of mailboxes it polls for new mail just as
-# if you had issued individual “mailboxes” commands.
-#
-
-
-# 3.113. imap_delim_chars
-#
-# Type: string
-# Default: “/.”
-#
-# This contains the list of characters which you would like to treat as folder
-# separators for displaying IMAP paths. In particular it helps in using the “=”
-# shortcut for your folder variable.
-#
-
-
-# 3.114. imap_headers
-#
-# Type: string
-# Default: (empty)
-#
-# Mutt requests these header fields in addition to the default headers (“Date:”,
-# “From:”, “Subject:”, “To:”, “Cc:”, “Message-Id:”, “References:”, “Content-Type:
-# ”, “Content-Description:”, “In-Reply-To:”, “Reply-To:”, “Lines:”, “List-Post:”,
-# “X-Label:”) from IMAP servers before displaying the index menu. You may want to
-# add more headers for spam detection.
-#
-# Note: This is a space separated list, items should be uppercase and not contain
-# the colon, e.g. “X-BOGOSITY X-SPAM-STATUS” for the “X-Bogosity:” and “
-# X-Spam-Status:” header fields.
-#
-
-
-# 3.115. imap_idle
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will attempt to use the IMAP IDLE extension to check for new
-# mail in the current mailbox. Some servers (dovecot was the inspiration for this
-# option) react badly to mutt's implementation. If your connection seems to
-# freeze up periodically, try unsetting this.
-#
-
-
-# 3.116. imap_keepalive
-#
-# Type: number
-# Default: 300
-#
-# This variable specifies the maximum amount of time in seconds that mutt will
-# wait before polling open IMAP connections, to prevent the server from closing
-# them before mutt has finished with them. The default is well within the
-# RFC-specified minimum amount of time (30 minutes) before a server is allowed to
-# do this, but in practice the RFC does get violated every now and then. Reduce
-# this number if you find yourself getting disconnected from your IMAP server due
-# to inactivity.
-#
-
-
-# 3.117. imap_list_subscribed
-#
-# Type: boolean
-# Default: no
-#
-# This variable configures whether IMAP folder browsing will look for only
-# subscribed folders or all folders. This can be toggled in the IMAP browser with
-# the <toggle-subscribed> function.
-#
-
-
-# 3.118. imap_login
-#
-# Type: string
-# Default: (empty)
-#
-# Your login name on the IMAP server.
-#
-# This variable defaults to the value of $imap_user.
-#
-
-
-# 3.119. imap_oauth_refresh_command
-#
-# Type: string
-# Default: (empty)
-#
-# The command to run to generate an OAUTH refresh token for authorizing your
-# connection to your IMAP server. This command will be run on every connection
-# attempt that uses the OAUTHBEARER authentication mechanism.
-#
-
-
-# 3.120. imap_pass
-#
-# Type: string
-# Default: (empty)
-#
-# Specifies the password for your IMAP account. If unset, Mutt will prompt you
-# for your password when you invoke the <imap-fetch-mail> function or try to open
-# an IMAP folder.
-#
-# Warning: you should only use this option when you are on a fairly secure
-# machine, because the superuser can read your muttrc even if you are the only
-# one who can read the file.
-#
-
-
-# 3.121. imap_passive
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will not open new IMAP connections to check for new mail. Mutt
-# will only check for new mail over existing IMAP connections. This is useful if
-# you don't want to be prompted to user/password pairs on mutt invocation, or if
-# opening the connection is slow.
-#
-
-
-# 3.122. imap_peek
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will avoid implicitly marking your mail as read whenever you
-# fetch a message from the server. This is generally a good thing, but can make
-# closing an IMAP folder somewhat slower. This option exists to appease speed
-# freaks.
-#
-
-
-# 3.123. imap_pipeline_depth
-#
-# Type: number
-# Default: 15
-#
-# Controls the number of IMAP commands that may be queued up before they are sent
-# to the server. A deeper pipeline reduces the amount of time mutt must wait for
-# the server, and can make IMAP servers feel much more responsive. But not all
-# servers correctly handle pipelined commands, so if you have problems you might
-# want to try setting this variable to 0.
-#
-# Note: Changes to this variable have no effect on open connections.
-#
-
-
-# 3.124. imap_poll_timeout
-#
-# Type: number
-# Default: 15
-#
-# This variable specifies the maximum amount of time in seconds that mutt will
-# wait for a response when polling IMAP connections for new mail, before timing
-# out and closing the connection. Set to 0 to disable timing out.
-#
-
-
-# 3.125. imap_servernoise
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will display warning messages from the IMAP server as error
-# messages. Since these messages are often harmless, or generated due to
-# configuration problems on the server which are out of the users' hands, you may
-# wish to suppress them at some point.
-#
-
-
-# 3.126. imap_user
-#
-# Type: string
-# Default: (empty)
-#
-# The name of the user whose mail you intend to access on the IMAP server.
-#
-# This variable defaults to your user name on the local machine.
-#
-
-
-# 3.127. implicit_autoview
-#
-# Type: boolean
-# Default: no
-#
-# If set to “yes”, mutt will look for a mailcap entry with the “copiousoutput”
-# flag set for every MIME attachment it doesn't have an internal viewer defined
-# for. If such an entry is found, mutt will use the viewer defined in that entry
-# to convert the body part to text form.
-#
-set implicit_autoview=no
-
-
-# 3.128. include
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# Controls whether or not a copy of the message(s) you are replying to is
-# included in your reply.
-#
-set include=yes
-
-
-# 3.129. include_onlyfirst
-#
-# Type: boolean
-# Default: no
-#
-# Controls whether or not Mutt includes only the first attachment of the message
-# you are replying.
-#
-
-
-# 3.130. indent_string
-#
-# Type: string
-# Default: “> ”
-#
-# Specifies the string to prepend to each line of text quoted in a message to
-# which you are replying. You are strongly encouraged not to change this value,
-# as it tends to agitate the more fanatical netizens.
-#
-# The value of this option is ignored if $text_flowed is set, because the quoting
-# mechanism is strictly defined for format=flowed.
-#
-# This option is a format string, please see the description of $index_format for
-# supported printf(3)-style sequences.
-#
-
-
-# 3.131. index_format
-#
-# Type: string
-# Default: “%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s”
-#
-# This variable allows you to customize the message index display to your
-# personal taste.
-#
-# “Format strings” are similar to the strings used in the C function printf(3) to
-# format output (see the man page for more details). For an explanation of the %?
-# construct, see the $status_format description. The following sequences are
-# defined in Mutt:
-#
-# ┌─────┬───────────────────────────────────────────────────────────────────────┐
-# │%a │address of the author │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%A │reply-to address (if present; otherwise: address of author) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%b │filename of the original message folder (think mailbox) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%B │the list to which the letter was sent, or else the folder name (%b). │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%c │number of characters (bytes) in the message │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%C │current message number │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%d │date and time of the message in the format specified by $date_format │
-# │ │converted to sender's time zone │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%D │date and time of the message in the format specified by $date_format │
-# │ │converted to the local time zone │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%e │current message number in thread │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%E │number of messages in current thread │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%f │sender (address + real name), either From: or Return-Path: │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%F │author name, or recipient name if the message is from you │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%H │spam attribute(s) of this message │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%i │message-id of the current message │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%l │number of lines in the message (does not work with maildir, mh, and │
-# │ │possibly IMAP folders) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │ │If an address in the “To:” or “Cc:” header field matches an address │
-# │%L │defined by the users “subscribe” command, this displays "To <list-name>│
-# │ │", otherwise the same as %F. │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%m │total number of message in the mailbox │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%M │number of hidden messages if the thread is collapsed. │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%N │message score │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%n │author's real name (or address if missing) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%O │original save folder where mutt would formerly have stashed the │
-# │ │message: list name or recipient name if not sent to a list │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%P │progress indicator for the built-in pager (how much of the file has │
-# │ │been displayed) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%r │comma separated list of “To:” recipients │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%R │comma separated list of “Cc:” recipients │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%s │subject of the message │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%S │single character status of the message (“N”/“O”/“D”/“d”/“!”/“r”/“*”) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%t │“To:” field (recipients) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%T │the appropriate character from the $to_chars string │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%u │user (login) name of the author │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%v │first name of the author, or the recipient if the message is from you │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%X │number of attachments (please see the “attachments” section for │
-# │ │possible speed effects) │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%y │“X-Label:” field, if present │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │ │“X-Label:” field, if present, and (1) not at part of a thread tree, (2)│
-# │%Y │at the top of a thread, or (3) “X-Label:” is different from preceding │
-# │ │message's “X-Label:”. │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │ │a three character set of message status flags. the first character is │
-# │%Z │new/read/replied flags (“n”/“o”/“r”/“O”/“N”). the second is deleted or │
-# │ │encryption flags (“D”/“d”/“S”/“P”/“s”/“K”). the third is either tagged/│
-# │ │flagged (“*”/“!”), or one of the characters listed in $to_chars. │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │% │the date and time of the message is converted to sender's time zone, │
-# │{fmt}│and “fmt” is expanded by the library function strftime(3); a leading │
-# │ │bang disables locales │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │% │the date and time of the message is converted to the local time zone, │
-# │[fmt]│and “fmt” is expanded by the library function strftime(3); a leading │
-# │ │bang disables locales │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │% │the local date and time when the message was received. “fmt” is │
-# │(fmt)│expanded by the library function strftime(3); a leading bang disables │
-# │ │locales │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │% │the current local time. “fmt” is expanded by the library function │
-# │<fmt>│strftime(3); a leading bang disables locales. │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%>X │right justify the rest of the string and pad with character “X” │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%|X │pad to the end of the line with character “X” │
-# ├─────┼───────────────────────────────────────────────────────────────────────┤
-# │%*X │soft-fill with character “X” as pad │
-# └─────┴───────────────────────────────────────────────────────────────────────┘
-#
-# “Soft-fill” deserves some explanation: Normal right-justification will print
-# everything to the left of the “%>”, displaying padding and whatever lies to the
-# right only if there's room. By contrast, soft-fill gives priority to the
-# right-hand side, guaranteeing space to display it and showing padding only if
-# there's still room. If necessary, soft-fill will eat text leftwards to make
-# room for rightward text.
-#
-# Note that these expandos are supported in “save-hook”, “fcc-hook” and “
-# fcc-save-hook”, too.
-#
-
-
-# 3.132. ispell
-#
-# Type: path
-# Default: “ispell”
-#
-# How to invoke ispell (GNU's spell-checking software).
-#
-
-
-# 3.133. keep_flagged
-#
-# Type: boolean
-# Default: no
-#
-# If set, read messages marked as flagged will not be moved from your spool
-# mailbox to your $mbox mailbox, or as a result of a “mbox-hook” command.
-#
-
-
-# 3.134. mail_check
-#
-# Type: number
-# Default: 5
-#
-# This variable configures how often (in seconds) mutt should look for new mail.
-# Also see the $timeout variable.
-#
-
-
-# 3.135. mail_check_recent
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will only notify you about new mail that has been received since
-# the last time you opened the mailbox. When unset, Mutt will notify you if any
-# new mail exists in the mailbox, regardless of whether you have visited it
-# recently.
-#
-# When $mark_old is set, Mutt does not consider the mailbox to contain new mail
-# if only old messages exist.
-#
-
-
-# 3.136. mail_check_stats
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will periodically calculate message statistics of a mailbox
-# while polling for new mail. It will check for unread, flagged, and total
-# message counts. Because this operation is more performance intensive, it
-# defaults to unset, and has a separate option, $mail_check_stats_interval, to
-# control how often to update these counts.
-#
-set mail_check_stats=yes
-
-
-# 3.137. mail_check_stats_interval
-#
-# Type: number
-# Default: 60
-#
-# When $mail_check_stats is set, this variable configures how often (in seconds)
-# mutt will update message counts.
-#
-
-
-# 3.138. mailcap_path
-#
-# Type: string
-# Default: (empty)
-#
-# This variable specifies which files to consult when attempting to display MIME
-# bodies not directly supported by Mutt.
-#
-set mailcap_path="$my_confdir/mailcap.containers:$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump"
-
-
-# 3.139. mailcap_sanitize
-#
-# Type: boolean
-# Default: yes
-#
-# If set, mutt will restrict possible characters in mailcap % expandos to a
-# well-defined set of safe characters. This is the safe setting, but we are not
-# sure it doesn't break some more advanced MIME stuff.
-#
-# DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
-#
-
-
-# 3.140. maildir_header_cache_verify
-#
-# Type: boolean
-# Default: yes
-#
-# Check for Maildir unaware programs other than mutt having modified maildir
-# files when the header cache is in use. This incurs one stat(2) per message
-# every time the folder is opened (which can be very slow for NFS folders).
-#
-set maildir_header_cache_verify=no
-
-
-# 3.141. maildir_trash
-#
-# Type: boolean
-# Default: no
-#
-# If set, messages marked as deleted will be saved with the maildir trashed flag
-# instead of unlinked. Note: this only applies to maildir-style mailboxes.
-# Setting it will have no effect on other mailbox types.
-#
-
-
-# 3.142. maildir_check_cur
-#
-# Type: boolean
-# Default: no
-#
-# If set, mutt will poll both the new and cur directories of a maildir folder for
-# new messages. This might be useful if other programs interacting with the
-# folder (e.g. dovecot) are moving new messages to the cur directory. Note that
-# setting this option may slow down polling for new messages in large folders,
-# since mutt has to scan all cur messages.
-#
-
-
-# 3.143. mark_macro_prefix
-#
-# Type: string
-# Default: “'”
-#
-# Prefix for macros created using mark-message. A new macro automatically
-# generated with <mark-message>a will be composed from this prefix and the letter
-# a.
-#
-
-
-# 3.144. mark_old
-#
-# Type: boolean
-# Default: yes
-#
-# Controls whether or not mutt marks new unread messages as old if you exit a
-# mailbox without reading them. With this option set, the next time you start
-# mutt, the messages will show up with an “O” next to them in the index menu,
-# indicating that they are old.
-#
-set mark_old=no
-
-
-# 3.145. markers
-#
-# Type: boolean
-# Default: yes
-#
-# Controls the display of wrapped lines in the internal pager. If set, a “+”
-# marker is displayed at the beginning of wrapped lines.
-#
-# Also see the $smart_wrap variable.
-#
-set markers=no
-
-
-# 3.146. mask
-#
-# Type: regular expression
-# Default: “!^.[^.]”
-#
-# A regular expression used in the file browser, optionally preceded by the not
-# operator “!”. Only files whose names match this mask will be shown. The match
-# is always case-sensitive.
-#
-
-
-# 3.147. mbox
-#
-# Type: path
-# Default: “~/mbox”
-#
-# This specifies the folder into which read mail in your $spoolfile folder will
-# be appended.
-#
-# Also see the $move variable.
-#
-set mbox="=spool"
-
-
-# 3.148. mbox_type
-#
-# Type: folder magic
-# Default: mbox
-#
-# The default mailbox type used when creating new folders. May be any of “mbox”,
-# “MMDF”, “MH” and “Maildir”. This is overridden by the -m command-line option.
-#
-set mbox_type=Maildir
-
-
-# 3.149. menu_context
-#
-# Type: number
-# Default: 0
-#
-# This variable controls the number of lines of context that are given when
-# scrolling through menus. (Similar to $pager_context.)
-#
-set menu_context=5
-
-
-# 3.150. menu_move_off
-#
-# Type: boolean
-# Default: yes
-#
-# When unset, the bottom entry of menus will never scroll up past the bottom of
-# the screen, unless there are less entries than lines. When set, the bottom
-# entry may move off the bottom.
-#
-
-
-# 3.151. menu_scroll
-#
-# Type: boolean
-# Default: no
-#
-# When set, menus will be scrolled up or down one line when you attempt to move
-# across a screen boundary. If unset, the screen is cleared and the next or
-# previous page of the menu is displayed (useful for slow links to avoid many
-# redraws).
-#
-set menu_scroll=yes
-
-
-# 3.152. message_cache_clean
-#
-# Type: boolean
-# Default: no
-#
-# If set, mutt will clean out obsolete entries from the message cache when the
-# mailbox is synchronized. You probably only want to set it every once in a
-# while, since it can be a little slow (especially for large folders).
-#
-
-
-# 3.153. message_cachedir
-#
-# Type: path
-# Default: (empty)
-#
-# Set this to a directory and mutt will cache copies of messages from your IMAP
-# and POP servers here. You are free to remove entries at any time.
-#
-# When setting this variable to a directory, mutt needs to fetch every remote
-# message only once and can perform regular expression searches as fast as for
-# local folders.
-#
-# Also see the $message_cache_clean variable.
-#
-
-
-# 3.154. message_format
-#
-# Type: string
-# Default: “%s”
-#
-# This is the string displayed in the “attachment” menu for attachments of type
-# message/rfc822. For a full listing of defined printf(3)-like sequences see the
-# section on $index_format.
-#
-
-
-# 3.155. meta_key
-#
-# Type: boolean
-# Default: no
-#
-# If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if
-# the user had pressed the Esc key and whatever key remains after having the high
-# bit removed. For example, if the key pressed has an ASCII value of 0xf8, then
-# this is treated as if the user had pressed Esc then “x”. This is because the
-# result of removing the high bit from 0xf8 is 0x78, which is the ASCII character
-# “x”.
-#
-
-
-# 3.156. metoo
-#
-# Type: boolean
-# Default: no
-#
-# If unset, Mutt will remove your address (see the “alternates” command) from the
-# list of recipients when replying to a message.
-#
-
-
-# 3.157. mh_purge
-#
-# Type: boolean
-# Default: no
-#
-# When unset, mutt will mimic mh's behavior and rename deleted messages to ,<old
-# file name> in mh folders instead of really deleting them. This leaves the
-# message on disk but makes programs reading the folder ignore it. If the
-# variable is set, the message files will simply be deleted.
-#
-# This option is similar to $maildir_trash for Maildir folders.
-#
-
-
-# 3.158. mh_seq_flagged
-#
-# Type: string
-# Default: “flagged”
-#
-# The name of the MH sequence used for flagged messages.
-#
-
-
-# 3.159. mh_seq_replied
-#
-# Type: string
-# Default: “replied”
-#
-# The name of the MH sequence used to tag replied messages.
-#
-
-
-# 3.160. mh_seq_unseen
-#
-# Type: string
-# Default: “unseen”
-#
-# The name of the MH sequence used for unseen messages.
-#
-
-
-# 3.161. mime_forward
-#
-# Type: quadoption
-# Default: no
-#
-# When set, the message you are forwarding will be attached as a separate message
-# /rfc822 MIME part instead of included in the main body of the message. This is
-# useful for forwarding MIME messages so the receiver can properly view the
-# message as it was delivered to you. If you like to switch between MIME and not
-# MIME from mail to mail, set this variable to “ask-no” or “ask-yes”.
-#
-# Also see $forward_decode and $mime_forward_decode.
-#
-set mime_forward=ask-yes
-
-
-# 3.162. mime_forward_decode
-#
-# Type: boolean
-# Default: no
-#
-# Controls the decoding of complex MIME messages into text/plain when forwarding
-# a message while $mime_forward is set. Otherwise $forward_decode is used
-# instead.
-#
-
-
-# 3.163. mime_forward_rest
-#
-# Type: quadoption
-# Default: yes
-#
-# When forwarding multiple attachments of a MIME message from the attachment
-# menu, attachments which cannot be decoded in a reasonable manner will be
-# attached to the newly composed message if this option is set.
-#
-
-
-# 3.164. mime_type_query_command
-#
-# Type: string
-# Default: (empty)
-#
-# This specifies a command to run, to determine the mime type of a new attachment
-# when composing a message. Unless $mime_type_query_first is set, this will only
-# be run if the attachment's extension is not found in the mime.types file.
-#
-# The string may contain a “%s”, which will be substituted with the attachment
-# filename. Mutt will add quotes around the string substituted for “%s”
-# automatically according to shell quoting rules, so you should avoid adding your
-# own. If no “%s” is found in the string, Mutt will append the attachment
-# filename to the end of the string.
-#
-# The command should output a single line containing the attachment's mime type.
-#
-# Suggested values are “xdg-mime query filetype” or “file -bi”.
-#
-
-
-# 3.165. mime_type_query_first
-#
-# Type: boolean
-# Default: no
-#
-# When set, the $mime_type_query_command will be run before the mime.types
-# lookup.
-#
-
-
-# 3.166. mix_entry_format
-#
-# Type: string
-# Default: “%4n %c %-16s %a”
-#
-# This variable describes the format of a remailer line on the mixmaster chain
-# selection screen. The following printf(3)-like sequences are supported:
-#
-# ┌──┬───────────────────────────────┐
-# │%n│The running number on the menu.│
-# ├──┼───────────────────────────────┤
-# │%c│Remailer capabilities. │
-# ├──┼───────────────────────────────┤
-# │%s│The remailer's short name. │
-# ├──┼───────────────────────────────┤
-# │%a│The remailer's e-mail address. │
-# └──┴───────────────────────────────┘
-#
-
-
-# 3.167. mixmaster
-#
-# Type: path
-# Default: “mixmaster”
-#
-# This variable contains the path to the Mixmaster binary on your system. It is
-# used with various sets of parameters to gather the list of known remailers, and
-# to finally send a message through the mixmaster chain.
-#
-set mixmaster="mixmaster-filter"
-
-
-# 3.168. move
-#
-# Type: quadoption
-# Default: no
-#
-# Controls whether or not Mutt will move read messages from your spool mailbox to
-# your $mbox mailbox, or as a result of a “mbox-hook” command.
-#
-set move=no
-
-
-# 3.169. narrow_tree
-#
-# Type: boolean
-# Default: no
-#
-# This variable, when set, makes the thread tree narrower, allowing deeper
-# threads to fit on the screen.
-#
-set narrow_tree=yes
-
-
-# 3.170. net_inc
-#
-# Type: number
-# Default: 10
-#
-# Operations that expect to transfer a large amount of data over the network will
-# update their progress every $net_inc kilobytes. If set to 0, no progress
-# messages will be displayed.
-#
-# See also $read_inc, $write_inc and $net_inc.
-#
-
-
-# 3.171. new_mail_command
-#
-# Type: path
-# Default: (empty)
-#
-# If set, Mutt will call this command after a new message is received. See the
-# $status_format documentation for the values that can be formatted into this
-# command.
-#
-
-
-# 3.172. pager
-#
-# Type: path
-# Default: “builtin”
-#
-# This variable specifies which pager you would like to use to view messages. The
-# value “builtin” means to use the built-in pager, otherwise this variable should
-# specify the pathname of the external pager you would like to use.
-#
-# Using an external pager may have some disadvantages: Additional keystrokes are
-# necessary because you can't call mutt functions directly from the pager, and
-# screen resizes cause lines longer than the screen width to be badly formatted
-# in the help menu.
-#
-
-
-# 3.173. pager_context
-#
-# Type: number
-# Default: 0
-#
-# This variable controls the number of lines of context that are given when
-# displaying the next or previous page in the internal pager. By default, Mutt
-# will display the line after the last one on the screen at the top of the next
-# page (0 lines of context).
-#
-# This variable also specifies the amount of context given for search results. If
-# positive, this many lines will be given before a match, if 0, the match will be
-# top-aligned.
-#
-set pager_context=2
-
-
-# 3.174. pager_format
-#
-# Type: string
-# Default: “-%Z- %C/%m: %-20.20n %s%* -- (%P)”
-#
-# This variable controls the format of the one-line message “status” displayed
-# before each message in either the internal or an external pager. The valid
-# sequences are listed in the $index_format section.
-#
-set pager_format="<%a> %* %i (%P)"
-
-
-# 3.175. pager_index_lines
-#
-# Type: number
-# Default: 0
-#
-# Determines the number of lines of a mini-index which is shown when in the
-# pager. The current message, unless near the top or bottom of the folder, will
-# be roughly one third of the way down this mini-index, giving the reader the
-# context of a few messages before and after the message. This is useful, for
-# example, to determine how many messages remain to be read in the current
-# thread. One of the lines is reserved for the status bar from the index, so a
-# setting of 6 will only show 5 lines of the actual index. A value of 0 results
-# in no index being shown. If the number of messages in the current folder is
-# less than $pager_index_lines, then the index will only use as many lines as it
-# needs.
-#
-set pager_index_lines=$menu_context
-
-
-# 3.176. pager_stop
-#
-# Type: boolean
-# Default: no
-#
-# When set, the internal-pager will not move to the next message when you are at
-# the end of a message and invoke the <next-page> function.
-#
-set pager_stop=yes
-
-
-# 3.177. pgp_auto_decode
-#
-# Type: boolean
-# Default: no
-#
-# If set, mutt will automatically attempt to decrypt traditional PGP messages
-# whenever the user performs an operation which ordinarily would result in the
-# contents of the message being operated on. For example, if the user displays a
-# pgp-traditional message which has not been manually checked with the
-# <check-traditional-pgp> function, mutt will automatically check the message for
-# traditional pgp.
-#
-set pgp_auto_decode=yes
-
-
-# 3.178. pgp_autoinline
-#
-# Type: boolean
-# Default: no
-#
-# This option controls whether Mutt generates old-style inline (traditional) PGP
-# encrypted or signed messages under certain circumstances. This can be
-# overridden by use of the pgp menu, when inline is not required. The GPGME
-# backend does not support this option.
-#
-# Note that Mutt might automatically use PGP/MIME for messages which consist of
-# more than a single MIME part. Mutt can be configured to ask before sending PGP/
-# MIME messages when inline (traditional) would not work.
-#
-# Also see the $pgp_mime_auto variable.
-#
-# Also note that using the old-style PGP message format is strongly deprecated.
-# (PGP only)
-#
-
-
-# 3.179. pgp_check_exit
-#
-# Type: boolean
-# Default: yes
-#
-# If set, mutt will check the exit code of the PGP subprocess when signing or
-# encrypting. A non-zero exit code means that the subprocess failed. (PGP only)
-#
-
-
-# 3.180. pgp_check_gpg_decrypt_status_fd
-#
-# Type: boolean
-# Default: yes
-#
-# If set, mutt will check the status file descriptor output of
-# $pgp_decrypt_command and $pgp_decode_command for GnuPG status codes indicating
-# successful decryption. This will check for the presence of DECRYPTION_OKAY,
-# absence of DECRYPTION_FAILED, and that all PLAINTEXT occurs between the
-# BEGIN_DECRYPTION and END_DECRYPTION status codes.
-#
-# If unset, mutt will instead match the status fd output against
-# $pgp_decryption_okay. (PGP only)
-#
-
-
-# 3.181. pgp_clearsign_command
-#
-# Type: string
-# Default: (empty)
-#
-# This format is used to create an old-style “clearsigned” PGP message. Note that
-# the use of this format is strongly deprecated.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.182. pgp_decode_command
-#
-# Type: string
-# Default: (empty)
-#
-# This format strings specifies a command which is used to decode application/pgp
-# attachments.
-#
-# The PGP command formats have their own set of printf(3)-like sequences:
-#
-# ┌──┬──────────────────────────────────────────────────────────────────────────┐
-# │%p│Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string │
-# │ │otherwise. Note: This may be used with a %? construct. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%f│Expands to the name of a file containing a message. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%s│Expands to the name of a file containing the signature part of a multipart│
-# │ │/signed attachment when verifying it. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%a│The value of $pgp_sign_as if set, otherwise the value of $pgp_default_key.│
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%r│One or more key IDs (or fingerprints if available). │
-# └──┴──────────────────────────────────────────────────────────────────────────┘
-#
-# For examples on how to configure these formats for the various versions of PGP
-# which are floating around, see the pgp and gpg sample configuration files in
-# the samples/ subdirectory which has been installed on your system alongside the
-# documentation. (PGP only)
-#
-
-
-# 3.183. pgp_decrypt_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to decrypt a PGP encrypted message.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.184. pgp_decryption_okay
-#
-# Type: regular expression
-# Default: (empty)
-#
-# If you assign text to this variable, then an encrypted PGP message is only
-# considered successfully decrypted if the output from $pgp_decrypt_command
-# contains the text. This is used to protect against a spoofed encrypted message,
-# with multipart/encrypted headers but containing a block that is not actually
-# encrypted. (e.g. simply signed and ascii armored text).
-#
-# Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable is ignored.
-# (PGP only)
-#
-
-
-# 3.185. pgp_default_key
-#
-# Type: string
-# Default: (empty)
-#
-# This is the default key-pair to use for PGP operations. It will be used for
-# encryption (see $postpone_encrypt and $pgp_self_encrypt).
-#
-# It will also be used for signing unless $pgp_sign_as is set.
-#
-# The (now deprecated) pgp_self_encrypt_as is an alias for this variable, and
-# should no longer be used. (PGP only)
-#
-
-
-# 3.186. pgp_encrypt_only_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to encrypt a body part without signing it.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.187. pgp_encrypt_sign_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to both sign and encrypt a body part.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.188. pgp_entry_format
-#
-# Type: string
-# Default: “%4n %t%f %4l/0x%k %-4a %2c %u”
-#
-# This variable allows you to customize the PGP key selection menu to your
-# personal taste. This string is similar to $index_format, but has its own set of
-# printf(3)-like sequences:
-#
-# ┌──────┬──────────────────────────────────────────────────────┐
-# │%n │number │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%k │key id │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%u │user id │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%a │algorithm │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%l │key length │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%f │flags │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%c │capabilities │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%t │trust/validity of the key-uid association │
-# ├──────┼──────────────────────────────────────────────────────┤
-# │%[<s>]│date of the key where <s> is an strftime(3) expression│
-# └──────┴──────────────────────────────────────────────────────┘
-#
-# (PGP only)
-#
-
-
-# 3.189. pgp_export_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to export a public key from the user's key ring.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.190. pgp_getkeys_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is invoked whenever Mutt needs to fetch the public key associated
-# with an email address. Of the sequences supported by $pgp_decode_command, %r is
-# the only printf(3)-like sequence used with this format. Note that in this case,
-# %r expands to the email address, not the public key ID (the key ID is unknown,
-# which is why Mutt is invoking this command). (PGP only)
-#
-
-
-# 3.191. pgp_good_sign
-#
-# Type: regular expression
-# Default: (empty)
-#
-# If you assign a text to this variable, then a PGP signature is only considered
-# verified if the output from $pgp_verify_command contains the text. Use this
-# variable if the exit code from the command is 0 even for bad signatures. (PGP
-# only)
-#
-
-
-# 3.192. pgp_ignore_subkeys
-#
-# Type: boolean
-# Default: yes
-#
-# Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the
-# principal key will inherit the subkeys' capabilities. Unset this if you want to
-# play interesting key selection games. (PGP only)
-#
-
-
-# 3.193. pgp_import_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to import a key from a message into the user's public key
-# ring.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.194. pgp_list_pubring_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to list the public key ring's contents. The output format
-# must be analogous to the one used by
-#
-# gpg --list-keys --with-colons --with-fingerprint
-#
-# This format is also generated by the pgpring utility which comes with mutt.
-#
-# Note: gpg's fixed-list-mode option should not be used. It produces a different
-# date format which may result in mutt showing incorrect key generation dates.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.195. pgp_list_secring_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to list the secret key ring's contents. The output format
-# must be analogous to the one used by:
-#
-# gpg --list-keys --with-colons --with-fingerprint
-#
-# This format is also generated by the pgpring utility which comes with mutt.
-#
-# Note: gpg's fixed-list-mode option should not be used. It produces a different
-# date format which may result in mutt showing incorrect key generation dates.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.196. pgp_long_ids
-#
-# Type: boolean
-# Default: yes
-#
-# If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. NOTE:
-# Internally, Mutt has transitioned to using fingerprints (or long key IDs as a
-# fallback). This option now only controls the display of key IDs in the key
-# selection menu and a few other places. (PGP only)
-#
-
-
-# 3.197. pgp_mime_auto
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# This option controls whether Mutt will prompt you for automatically sending a
-# (signed/encrypted) message using PGP/MIME when inline (traditional) fails (for
-# any reason).
-#
-# Also note that using the old-style PGP message format is strongly deprecated.
-# (PGP only)
-#
-
-
-# 3.198. pgp_replyinline
-#
-# Type: boolean
-# Default: no
-#
-# Setting this variable will cause Mutt to always attempt to create an inline
-# (traditional) message when replying to a message which is PGP encrypted/signed
-# inline. This can be overridden by use of the pgp menu, when inline is not
-# required. This option does not automatically detect if the (replied-to) message
-# is inline; instead it relies on Mutt internals for previously checked/flagged
-# messages.
-#
-# Note that Mutt might automatically use PGP/MIME for messages which consist of
-# more than a single MIME part. Mutt can be configured to ask before sending PGP/
-# MIME messages when inline (traditional) would not work.
-#
-# Also see the $pgp_mime_auto variable.
-#
-# Also note that using the old-style PGP message format is strongly deprecated.
-# (PGP only)
-#
-
-
-# 3.199. pgp_retainable_sigs
-#
-# Type: boolean
-# Default: no
-#
-# If set, signed and encrypted messages will consist of nested multipart/signed
-# and multipart/encrypted body parts.
-#
-# This is useful for applications like encrypted and signed mailing lists, where
-# the outer layer (multipart/encrypted) can be easily removed, while the inner
-# multipart/signed part is retained. (PGP only)
-#
-set pgp_retainable_sigs=yes
-
-
-# 3.200. pgp_self_encrypt
-#
-# Type: boolean
-# Default: yes
-#
-# When set, PGP encrypted messages will also be encrypted using the key in
-# $pgp_default_key. (PGP only)
-#
-
-
-# 3.201. pgp_show_unusable
-#
-# Type: boolean
-# Default: yes
-#
-# If set, mutt will display non-usable keys on the PGP key selection menu. This
-# includes keys which have been revoked, have expired, or have been marked as “
-# disabled” by the user. (PGP only)
-#
-set pgp_show_unusable=no
-
-
-# 3.202. pgp_sign_as
-#
-# Type: string
-# Default: (empty)
-#
-# If you have a different key pair to use for signing, you should set this to the
-# signing key. Most people will only need to set $pgp_default_key. It is
-# recommended that you use the keyid form to specify your key (e.g. 0x00112233).
-# (PGP only)
-#
-set pgp_sign_as="0x9C9D6979AE941637"
-
-
-# 3.203. pgp_sign_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to create the detached PGP signature for a multipart/
-# signed PGP/MIME body part.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.204. pgp_sort_keys
-#
-# Type: sort order
-# Default: address
-#
-# Specifies how the entries in the pgp menu are sorted. The following are legal
-# values:
-#
-# ┌───────┬──────────────────────────────┐
-# │address│sort alphabetically by user id│
-# ├───────┼──────────────────────────────┤
-# │keyid │sort alphabetically by key id │
-# ├───────┼──────────────────────────────┤
-# │date │sort by key creation date │
-# ├───────┼──────────────────────────────┤
-# │trust │sort by the trust of the key │
-# └───────┴──────────────────────────────┘
-#
-# If you prefer reverse order of the above values, prefix it with “reverse-”.
-# (PGP only)
-#
-
-
-# 3.205. pgp_strict_enc
-#
-# Type: boolean
-# Default: yes
-#
-# If set, Mutt will automatically encode PGP/MIME signed messages as
-# quoted-printable. Please note that unsetting this variable may lead to problems
-# with non-verifyable PGP signatures, so only change this if you know what you
-# are doing. (PGP only)
-#
-
-
-# 3.206. pgp_timeout
-#
-# Type: number
-# Default: 300
-#
-# The number of seconds after which a cached passphrase will expire if not used.
-# (PGP only)
-#
-
-
-# 3.207. pgp_use_gpg_agent
-#
-# Type: boolean
-# Default: no
-#
-# If set, mutt will use a possibly-running gpg-agent(1) process. Note that as of
-# version 2.1, GnuPG no longer exports GPG_AGENT_INFO, so mutt no longer verifies
-# if the agent is running. (PGP only)
-#
-set pgp_use_gpg_agent=yes
-
-
-# 3.208. pgp_verify_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to verify PGP signatures.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.209. pgp_verify_key_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to verify key information from the key selection menu.
-#
-# This is a format string, see the $pgp_decode_command command for possible
-# printf(3)-like sequences. (PGP only)
-#
-
-
-# 3.210. pipe_decode
-#
-# Type: boolean
-# Default: no
-#
-# Used in connection with the <pipe-message> command. When unset, Mutt will pipe
-# the messages without any preprocessing. When set, Mutt will weed headers and
-# will attempt to decode the messages first.
-#
-
-
-# 3.211. pipe_sep
-#
-# Type: string
-# Default: “n”
-#
-# The separator to add between messages when piping a list of tagged messages to
-# an external Unix command.
-#
-
-
-# 3.212. pipe_split
-#
-# Type: boolean
-# Default: no
-#
-# Used in connection with the <pipe-message> function following <tag-prefix>. If
-# this variable is unset, when piping a list of tagged messages Mutt will
-# concatenate the messages and will pipe them all concatenated. When set, Mutt
-# will pipe the messages one by one. In both cases the messages are piped in the
-# current sorted order, and the $pipe_sep separator is added after each message.
-#
-
-
-# 3.213. pop_auth_try_all
-#
-# Type: boolean
-# Default: yes
-#
-# If set, Mutt will try all available authentication methods. When unset, Mutt
-# will only fall back to other authentication methods if the previous methods are
-# unavailable. If a method is available but authentication fails, Mutt will not
-# connect to the POP server.
-#
-
-
-# 3.214. pop_authenticators
-#
-# Type: string
-# Default: (empty)
-#
-# This is a colon-delimited list of authentication methods mutt may attempt to
-# use to log in to an POP server, in the order mutt should try them.
-# Authentication methods are either “user”, “apop” or any SASL mechanism, e.g. “
-# digest-md5”, “gssapi” or “cram-md5”. This option is case-insensitive. If this
-# option is unset (the default) mutt will try all available methods, in order
-# from most-secure to least-secure.
-#
-# Example:
-#
-# set pop_authenticators="digest-md5:apop:user"
-#
-
-
-# 3.215. pop_checkinterval
-#
-# Type: number
-# Default: 60
-#
-# This variable configures how often (in seconds) mutt should look for new mail
-# in the currently selected mailbox if it is a POP mailbox.
-#
-
-
-# 3.216. pop_delete
-#
-# Type: quadoption
-# Default: ask-no
-#
-# If set, Mutt will delete successfully downloaded messages from the POP server
-# when using the <fetch-mail> function. When unset, Mutt will download messages
-# but also leave them on the POP server.
-#
-
-
-# 3.217. pop_host
-#
-# Type: string
-# Default: (empty)
-#
-# The name of your POP server for the <fetch-mail> function. You can also specify
-# an alternative port, username and password, i.e.:
-#
-# [pop[s]://][username[:password]@]popserver[:port]
-#
-# where “[...]” denotes an optional part.
-#
-
-
-# 3.218. pop_last
-#
-# Type: boolean
-# Default: no
-#
-# If this variable is set, mutt will try to use the “LAST” POP command for
-# retrieving only unread messages from the POP server when using the <fetch-mail>
-# function.
-#
-
-
-# 3.219. pop_oauth_refresh_command
-#
-# Type: string
-# Default: (empty)
-#
-# The command to run to generate an OAUTH refresh token for authorizing your
-# connection to your POP server. This command will be run on every connection
-# attempt that uses the OAUTHBEARER authentication mechanism.
-#
-
-
-# 3.220. pop_pass
-#
-# Type: string
-# Default: (empty)
-#
-# Specifies the password for your POP account. If unset, Mutt will prompt you for
-# your password when you open a POP mailbox.
-#
-# Warning: you should only use this option when you are on a fairly secure
-# machine, because the superuser can read your muttrc even if you are the only
-# one who can read the file.
-#
-
-
-# 3.221. pop_reconnect
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# Controls whether or not Mutt will try to reconnect to the POP server if the
-# connection is lost.
-#
-
-
-# 3.222. pop_user
-#
-# Type: string
-# Default: (empty)
-#
-# Your login name on the POP server.
-#
-# This variable defaults to your user name on the local machine.
-#
-
-
-# 3.223. post_indent_string
-#
-# Type: string
-# Default: (empty)
-#
-# Similar to the $attribution variable, Mutt will append this string after the
-# inclusion of a message which is being replied to.
-#
-
-
-# 3.224. postpone
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# Controls whether or not messages are saved in the $postponed mailbox when you
-# elect not to send immediately.
-#
-# Also see the $recall variable.
-#
-
-
-# 3.225. postponed
-#
-# Type: path
-# Default: “~/postponed”
-#
-# Mutt allows you to indefinitely “postpone sending a message” which you are
-# editing. When you choose to postpone a message, Mutt saves it in the mailbox
-# specified by this variable.
-#
-# Also see the $postpone variable.
-#
-set postponed="=drafts"
-
-
-# 3.226. postpone_encrypt
-#
-# Type: boolean
-# Default: no
-#
-# When set, postponed messages that are marked for encryption will be
-# self-encrypted. Mutt will first try to encrypt using the value specified in
-# $pgp_default_key or $smime_default_key. If those are not set, it will try the
-# deprecated $postpone_encrypt_as. (Crypto only)
-#
-
-
-# 3.227. postpone_encrypt_as
-#
-# Type: string
-# Default: (empty)
-#
-# This is a deprecated fall-back variable for $postpone_encrypt. Please use
-# $pgp_default_key or $smime_default_key. (Crypto only)
-#
-
-
-# 3.228. preconnect
-#
-# Type: string
-# Default: (empty)
-#
-# If set, a shell command to be executed if mutt fails to establish a connection
-# to the server. This is useful for setting up secure connections, e.g. with ssh
-# (1). If the command returns a nonzero status, mutt gives up opening the server.
-# Example:
-#
-# set preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net sleep 20 < /dev/null > /dev/null"
-#
-# Mailbox “foo” on “mailhost.net” can now be reached as “{localhost:1234}foo”.
-#
-# Note: For this example to work, you must be able to log in to the remote
-# machine without having to enter a password.
-#
-
-
-# 3.229. print
-#
-# Type: quadoption
-# Default: ask-no
-#
-# Controls whether or not Mutt really prints messages. This is set to “ask-no” by
-# default, because some people accidentally hit “p” often.
-#
-
-
-# 3.230. print_command
-#
-# Type: path
-# Default: “lpr”
-#
-# This specifies the command pipe that should be used to print messages.
-#
-set print_command="muttprint"
-
-
-# 3.231. print_decode
-#
-# Type: boolean
-# Default: yes
-#
-# Used in connection with the <print-message> command. If this option is set, the
-# message is decoded before it is passed to the external command specified by
-# $print_command. If this option is unset, no processing will be applied to the
-# message when printing it. The latter setting may be useful if you are using
-# some advanced printer filter which is able to properly format e-mail messages
-# for printing.
-#
-
-
-# 3.232. print_split
-#
-# Type: boolean
-# Default: no
-#
-# Used in connection with the <print-message> command. If this option is set, the
-# command specified by $print_command is executed once for each message which is
-# to be printed. If this option is unset, the command specified by $print_command
-# is executed only once, and all the messages are concatenated, with a form feed
-# as the message separator.
-#
-# Those who use the enscript(1) program's mail-printing mode will most likely
-# want to set this option.
-#
-set print_split=yes
-
-
-# 3.233. prompt_after
-#
-# Type: boolean
-# Default: yes
-#
-# If you use an external $pager, setting this variable will cause Mutt to prompt
-# you for a command when the pager exits rather than returning to the index menu.
-# If unset, Mutt will return to the index menu when the external pager exits.
-#
-
-
-# 3.234. query_command
-#
-# Type: path
-# Default: (empty)
-#
-# This specifies the command Mutt will use to make external address queries. The
-# string may contain a “%s”, which will be substituted with the query string the
-# user types. Mutt will add quotes around the string substituted for “%s”
-# automatically according to shell quoting rules, so you should avoid adding your
-# own. If no “%s” is found in the string, Mutt will append the user's query to
-# the end of the string. See “query” for more information.
-#
-set query_command="lbdbq"
-
-
-# 3.235. query_format
-#
-# Type: string
-# Default: “%4c %t %-25.25a %-25.25n %?e?(%e)?”
-#
-# This variable describes the format of the “query” menu. The following printf(3)
-# -style sequences are understood:
-#
-# ┌───┬─────────────────────────────────────────────────────┐
-# │%a │destination address │
-# ├───┼─────────────────────────────────────────────────────┤
-# │%c │current entry number │
-# ├───┼─────────────────────────────────────────────────────┤
-# │%e │extra information * │
-# ├───┼─────────────────────────────────────────────────────┤
-# │%n │destination name │
-# ├───┼─────────────────────────────────────────────────────┤
-# │%t │“*” if current entry is tagged, a space otherwise │
-# ├───┼─────────────────────────────────────────────────────┤
-# │%>X│right justify the rest of the string and pad with “X”│
-# ├───┼─────────────────────────────────────────────────────┤
-# │%|X│pad to the end of the line with “X” │
-# ├───┼─────────────────────────────────────────────────────┤
-# │%*X│soft-fill with character “X” as pad │
-# └───┴─────────────────────────────────────────────────────┘
-#
-# For an explanation of “soft-fill”, see the $index_format documentation.
-#
-# * = can be optionally printed if nonzero, see the $status_format documentation.
-#
-
-
-# 3.236. quit
-#
-# Type: quadoption
-# Default: yes
-#
-# This variable controls whether “quit” and “exit” actually quit from mutt. If
-# this option is set, they do quit, if it is unset, they have no effect, and if
-# it is set to ask-yes or ask-no, you are prompted for confirmation when you try
-# to quit.
-#
-
-
-# 3.237. quote_regexp
-#
-# Type: regular expression
-# Default: “^([ t]*[|>:}#])+”
-#
-# A regular expression used in the internal pager to determine quoted sections of
-# text in the body of a message. Quoted text may be filtered out using the
-# <toggle-quoted> command, or colored according to the “color quoted” family of
-# directives.
-#
-# Higher levels of quoting may be colored differently (“color quoted1”, “color
-# quoted2”, etc.). The quoting level is determined by removing the last character
-# from the matched text and recursively reapplying the regular expression until
-# it fails to produce a match.
-#
-# Match detection may be overridden by the $smileys regular expression.
-#
-
-
-# 3.238. read_inc
-#
-# Type: number
-# Default: 10
-#
-# If set to a value greater than 0, Mutt will display which message it is
-# currently on when reading a mailbox or when performing search actions such as
-# search and limit. The message is printed after this many messages have been
-# read or searched (e.g., if set to 25, Mutt will print a message when it is at
-# message 25, and then again when it gets to message 50). This variable is meant
-# to indicate progress when reading or searching large mailboxes which may take
-# some time. When set to 0, only a single message will appear before the reading
-# the mailbox.
-#
-# Also see the $write_inc, $net_inc and $time_inc variables and the “tuning”
-# section of the manual for performance considerations.
-#
-
-
-# 3.239. read_only
-#
-# Type: boolean
-# Default: no
-#
-# If set, all folders are opened in read-only mode.
-#
-
-
-# 3.240. realname
-#
-# Type: string
-# Default: (empty)
-#
-# This variable specifies what “real” or “personal” name should be used when
-# sending messages.
-#
-# By default, this is the GECOS field from /etc/passwd. Note that this variable
-# will not be used when the user has set a real name in the $from variable.
-#
-
-
-# 3.241. recall
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# Controls whether or not Mutt recalls postponed messages when composing a new
-# message.
-#
-# Setting this variable to yes is not generally useful, and thus not recommended.
-# Note that the <recall-message> function can be used to manually recall
-# postponed messages.
-#
-# Also see $postponed variable.
-#
-set recall=no
-
-
-# 3.242. record
-#
-# Type: path
-# Default: “~/sent”
-#
-# This specifies the file into which your outgoing messages should be appended.
-# (This is meant as the primary method for saving a copy of your messages, but
-# another way to do this is using the “my_hdr” command to create a “Bcc:” field
-# with your email address in it.)
-#
-# The value of $record is overridden by the $force_name and $save_name variables,
-# and the “fcc-hook” command.
-#
-set record="=store"
-
-
-# 3.243. reflow_space_quotes
-#
-# Type: boolean
-# Default: yes
-#
-# This option controls how quotes from format=flowed messages are displayed in
-# the pager and when replying (with $text_flowed unset). When set, this option
-# adds spaces after each level of quote marks, turning ">>>foo" into "> > > foo".
-#
-# Note: If $reflow_text is unset, this option has no effect. Also, this option
-# does not affect replies when $text_flowed is set.
-#
-
-
-# 3.244. reflow_text
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will reformat paragraphs in text/plain parts marked format=
-# flowed. If unset, Mutt will display paragraphs unaltered from how they appear
-# in the message body. See RFC3676 for details on the format=flowed format.
-#
-# Also see $reflow_wrap, and $wrap.
-#
-
-
-# 3.245. reflow_wrap
-#
-# Type: number
-# Default: 78
-#
-# This variable controls the maximum paragraph width when reformatting text/plain
-# parts when $reflow_text is set. When the value is 0, paragraphs will be wrapped
-# at the terminal's right margin. A positive value sets the paragraph width
-# relative to the left margin. A negative value set the paragraph width relative
-# to the right margin.
-#
-# Also see $wrap.
-#
-set reflow_wrap=-10
-
-
-# 3.246. reply_regexp
-#
-# Type: regular expression
-# Default: “^(re([[0-9]+])*|aw):[ t]*”
-#
-# A regular expression used to recognize reply messages when threading and
-# replying. The default value corresponds to the English "Re:" and the German
-# "Aw:".
-#
-set reply_regexp="^((re([-[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+"
-
-
-# 3.247. reply_self
-#
-# Type: boolean
-# Default: no
-#
-# If unset and you are replying to a message sent by you, Mutt will assume that
-# you want to reply to the recipients of that message rather than to yourself.
-#
-# Also see the “alternates” command.
-#
-
-
-# 3.248. reply_to
-#
-# Type: quadoption
-# Default: ask-yes
-#
-# If set, when replying to a message, Mutt will use the address listed in the
-# Reply-to: header as the recipient of the reply. If unset, it will use the
-# address in the From: header field instead. This option is useful for reading a
-# mailing list that sets the Reply-To: header field to the list address and you
-# want to send a private message to the author of a message.
-#
-
-
-# 3.249. resolve
-#
-# Type: boolean
-# Default: yes
-#
-# When set, the cursor will be automatically advanced to the next (possibly
-# undeleted) message whenever a command that modifies the current message is
-# executed.
-#
-
-
-# 3.250. resume_draft_files
-#
-# Type: boolean
-# Default: no
-#
-# If set, draft files (specified by -H on the command line) are processed
-# similarly to when resuming a postponed message. Recipients are not prompted
-# for; send-hooks are not evaluated; no alias expansion takes place; user-defined
-# headers and signatures are not added to the message.
-#
-
-
-# 3.251. resume_edited_draft_files
-#
-# Type: boolean
-# Default: yes
-#
-# If set, draft files previously edited (via -E -H on the command line) will have
-# $resume_draft_files automatically set when they are used as a draft file again.
-#
-# The first time a draft file is saved, mutt will add a header,
-# X-Mutt-Resume-Draft to the saved file. The next time the draft file is read in,
-# if mutt sees the header, it will set $resume_draft_files.
-#
-# This option is designed to prevent multiple signatures, user-defined headers,
-# and other processing effects from being made multiple times to the draft file.
-#
-
-
-# 3.252. reverse_alias
-#
-# Type: boolean
-# Default: no
-#
-# This variable controls whether or not Mutt will display the “personal” name
-# from your aliases in the index menu if it finds an alias that matches the
-# message's sender. For example, if you have the following alias:
-#
-# alias juser abd30425@somewhere.net (Joe User)
-#
-# and then you receive mail which contains the following header:
-#
-# From: abd30425@somewhere.net
-#
-# It would be displayed in the index menu as “Joe User” instead of “
-# abd30425@somewhere.net.” This is useful when the person's e-mail address is not
-# human friendly.
-#
-
-
-# 3.253. reverse_name
-#
-# Type: boolean
-# Default: no
-#
-# It may sometimes arrive that you receive mail to a certain machine, move the
-# messages to another machine, and reply to some the messages from there. If this
-# variable is set, the default From: line of the reply messages is built using
-# the address where you received the messages you are replying to if that address
-# matches your “alternates”. If the variable is unset, or the address that would
-# be used doesn't match your “alternates”, the From: line will use your address
-# on the current machine.
-#
-# Also see the “alternates” command.
-#
-set reverse_name=yes
-
-
-# 3.254. reverse_realname
-#
-# Type: boolean
-# Default: yes
-#
-# This variable fine-tunes the behavior of the $reverse_name feature. When it is
-# set, mutt will use the address from incoming messages as-is, possibly including
-# eventual real names. When it is unset, mutt will override any such real names
-# with the setting of the $realname variable.
-#
-
-
-# 3.255. rfc2047_parameters
-#
-# Type: boolean
-# Default: no
-#
-# When this variable is set, Mutt will decode RFC2047-encoded MIME parameters.
-# You want to set this variable when mutt suggests you to save attachments to
-# files named like:
-#
-# =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
-#
-# When this variable is set interactively, the change won't be active until you
-# change folders.
-#
-# Note that this use of RFC2047's encoding is explicitly prohibited by the
-# standard, but nevertheless encountered in the wild.
-#
-# Also note that setting this parameter will not have the effect that mutt
-# generates this kind of encoding. Instead, mutt will unconditionally use the
-# encoding specified in RFC2231.
-#
-set rfc2047_parameters=yes
-
-
-# 3.256. save_address
-#
-# Type: boolean
-# Default: no
-#
-# If set, mutt will take the sender's full address when choosing a default folder
-# for saving a mail. If $save_name or $force_name is set too, the selection of
-# the Fcc folder will be changed as well.
-#
-
-
-# 3.257. save_empty
-#
-# Type: boolean
-# Default: yes
-#
-# When unset, mailboxes which contain no saved messages will be removed when
-# closed (the exception is $spoolfile which is never removed). If set, mailboxes
-# are never removed.
-#
-# Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and
-# Maildir directories.
-#
-
-
-# 3.258. save_history
-#
-# Type: number
-# Default: 0
-#
-# This variable controls the size of the history (per category) saved in the
-# $history_file file.
-#
-set save_history=100
-
-
-# 3.259. save_name
-#
-# Type: boolean
-# Default: no
-#
-# This variable controls how copies of outgoing messages are saved. When set, a
-# check is made to see if a mailbox specified by the recipient address exists
-# (this is done by searching for a mailbox in the $folder directory with the
-# username part of the recipient address). If the mailbox exists, the outgoing
-# message will be saved to that mailbox, otherwise the message is saved to the
-# $record mailbox.
-#
-# Also see the $force_name variable.
-#
-
-
-# 3.260. score
-#
-# Type: boolean
-# Default: yes
-#
-# When this variable is unset, scoring is turned off. This can be useful to
-# selectively disable scoring for certain folders when the
-# $score_threshold_delete variable and related are used.
-#
-
-
-# 3.261. score_threshold_delete
-#
-# Type: number
-# Default: -1
-#
-# Messages which have been assigned a score equal to or lower than the value of
-# this variable are automatically marked for deletion by mutt. Since mutt scores
-# are always greater than or equal to zero, the default setting of this variable
-# will never mark a message for deletion.
-#
-
-
-# 3.262. score_threshold_flag
-#
-# Type: number
-# Default: 9999
-#
-# Messages which have been assigned a score greater than or equal to this
-# variable's value are automatically marked "flagged".
-#
-
-
-# 3.263. score_threshold_read
-#
-# Type: number
-# Default: -1
-#
-# Messages which have been assigned a score equal to or lower than the value of
-# this variable are automatically marked as read by mutt. Since mutt scores are
-# always greater than or equal to zero, the default setting of this variable will
-# never mark a message read.
-#
-
-
-# 3.264. search_context
-#
-# Type: number
-# Default: 0
-#
-# For the pager, this variable specifies the number of lines shown before search
-# results. By default, search results will be top-aligned.
-#
-set search_context=5
-
-
-# 3.265. send_charset
-#
-# Type: string
-# Default: “us-ascii:iso-8859-1:utf-8”
-#
-# A colon-delimited list of character sets for outgoing messages. Mutt will use
-# the first character set into which the text can be converted exactly. If your
-# $charset is not “iso-8859-1” and recipients may not understand “UTF-8”, it is
-# advisable to include in the list an appropriate widely used standard character
-# set (such as “iso-8859-2”, “koi8-r” or “iso-2022-jp”) either instead of or
-# after “iso-8859-1”.
-#
-# In case the text cannot be converted into one of these exactly, mutt uses
-# $charset as a fallback.
-#
-set send_charset="utf-8"
-
-
-# 3.266. sendmail
-#
-# Type: path
-# Default: “/usr/sbin/sendmail -oem -oi”
-#
-# Specifies the program and arguments used to deliver mail sent by Mutt. Mutt
-# expects that the specified program interprets additional arguments as recipient
-# addresses. Mutt appends all recipients after adding a -- delimiter (if not
-# already present). Additional flags, such as for $use_8bitmime,
-# $use_envelope_from, $dsn_notify, or $dsn_return will be added before the
-# delimiter.
-#
-set sendmail="$my_confdir/sendmail"
-
-
-# 3.267. sendmail_wait
-#
-# Type: number
-# Default: 0
-#
-# Specifies the number of seconds to wait for the $sendmail process to finish
-# before giving up and putting delivery in the background.
-#
-# Mutt interprets the value of this variable as follows:
-#
-# ┌──┬──────────────────────────────────────────────────────────────────┐
-# │>0│number of seconds to wait for sendmail to finish before continuing│
-# ├──┼──────────────────────────────────────────────────────────────────┤
-# │0 │wait forever for sendmail to finish │
-# ├──┼──────────────────────────────────────────────────────────────────┤
-# │<0│always put sendmail in the background without waiting │
-# └──┴──────────────────────────────────────────────────────────────────┘
-#
-# Note that if you specify a value other than 0, the output of the child process
-# will be put in a temporary file. If there is some error, you will be informed
-# as to where to find the output.
-#
-
-
-# 3.268. shell
-#
-# Type: path
-# Default: (empty)
-#
-# Command to use when spawning a subshell. By default, the user's login shell
-# from /etc/passwd is used.
-#
-
-
-# 3.269. sidebar_delim_chars
-#
-# Type: string
-# Default: “/.”
-#
-# This contains the list of characters which you would like to treat as folder
-# separators for displaying paths in the sidebar.
-#
-# Local mail is often arranged in directories: `dir1/dir2/mailbox'.
-#
-# set sidebar_delim_chars='/'
-#
-# IMAP mailboxes are often named: `folder1.folder2.mailbox'.
-#
-# set sidebar_delim_chars='.'
-#
-# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.
-#
-
-
-# 3.270. sidebar_divider_char
-#
-# Type: string
-# Default: “|”
-#
-# This specifies the characters to be drawn between the sidebar (when visible)
-# and the other Mutt panels. ASCII and Unicode line-drawing characters are
-# supported.
-#
-set sidebar_divider_char=" "
-
-
-# 3.271. sidebar_folder_indent
-#
-# Type: boolean
-# Default: no
-#
-# Set this to indent mailboxes in the sidebar.
-#
-# See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.
-#
-set sidebar_folder_indent=yes
-
-
-# 3.272. sidebar_format
-#
-# Type: string
-# Default: “%B%* %n”
-#
-# This variable allows you to customize the sidebar display. This string is
-# similar to $index_format, but has its own set of printf(3)-like sequences:
-#
-# ┌───┬─────────────────────────────────────────────────────────────────────────┐
-# │%B │Name of the mailbox │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%S │* Size of mailbox (total number of messages) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%N │* Number of unread messages in the mailbox │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%n │N if mailbox has new mail, blank otherwise │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%F │* Number of Flagged messages in the mailbox │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%! │“!” : one flagged message; “!!” : two flagged messages; “n!” : n flagged │
-# │ │messages (for n > 2). Otherwise prints nothing. │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%d │* @ Number of deleted messages │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%L │* @ Number of messages after limiting │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%t │* @ Number of tagged messages │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%>X│right justify the rest of the string and pad with “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%|X│pad to the end of the line with “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%*X│soft-fill with character “X” as pad │
-# └───┴─────────────────────────────────────────────────────────────────────────┘
-#
-# * = Can be optionally printed if nonzero @ = Only applicable to the current
-# folder
-#
-# In order to use %S, %N, %F, and %!, $mail_check_stats must be set. When thus
-# set, a suggested value for this option is "%B%?F? [%F]?%* %?N?%N/?%S".
-#
-set sidebar_format="%B%?F? [%F]?%* %?N?%N/?%S"
-
-
-# 3.273. sidebar_indent_string
-#
-# Type: string
-# Default: “ ”
-#
-# This specifies the string that is used to indent mailboxes in the sidebar. It
-# defaults to two spaces.
-#
-# See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.
-#
-set sidebar_indent_string=" "
-
-
-# 3.274. sidebar_new_mail_only
-#
-# Type: boolean
-# Default: no
-#
-# When set, the sidebar will only display mailboxes containing new, or flagged,
-# mail.
-#
-# See also: sidebar_whitelist.
-#
-
-
-# 3.275. sidebar_next_new_wrap
-#
-# Type: boolean
-# Default: no
-#
-# When set, the <sidebar-next-new> command will not stop and the end of the list
-# of mailboxes, but wrap around to the beginning. The <sidebar-prev-new> command
-# is similarly affected, wrapping around to the end of the list.
-#
-set sidebar_next_new_wrap=yes
-
-
-# 3.276. sidebar_short_path
-#
-# Type: boolean
-# Default: no
-#
-# By default the sidebar will show the mailbox's path, relative to the $folder
-# variable. Setting sidebar_shortpath=yes will shorten the names relative to the
-# previous name. Here's an example:
-#
-# ┌────────────┬─────────────┬───────────────────────────────────────────────┐
-# │shortpath=no│shortpath=yes│shortpath=yes, folderindent=yes, indentstr=".."│
-# ├────────────┼─────────────┼───────────────────────────────────────────────┤
-# │fruit │fruit │fruit │
-# ├────────────┼─────────────┼───────────────────────────────────────────────┤
-# │fruit.apple │apple │..apple │
-# ├────────────┼─────────────┼───────────────────────────────────────────────┤
-# │fruit.banana│banana │..banana │
-# ├────────────┼─────────────┼───────────────────────────────────────────────┤
-# │fruit.cherry│cherry │..cherry │
-# └────────────┴─────────────┴───────────────────────────────────────────────┘
-#
-# See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string.
-#
-set sidebar_short_path=yes
-
-
-# 3.277. sidebar_sort_method
-#
-# Type: sort order
-# Default: order
-#
-# Specifies how to sort entries in the file browser. By default, the entries are
-# sorted alphabetically. Valid values:
-#
-# • alpha (alphabetically)
-#
-# • count (all message count)
-#
-# • flagged (flagged message count)
-#
-# • name (alphabetically)
-#
-# • new (unread message count)
-#
-# • path (alphabetically)
-#
-# • unread (unread message count)
-#
-# • unsorted
-#
-# You may optionally use the “reverse-” prefix to specify reverse sorting order
-# (example: “set sort_browser=reverse-date”).
-#
-set sidebar_sort_method=path
-
-
-# 3.278. sidebar_visible
-#
-# Type: boolean
-# Default: no
-#
-# This specifies whether or not to show sidebar. The sidebar shows a list of all
-# your mailboxes.
-#
-# See also: $sidebar_format, $sidebar_width
-#
-set sidebar_visible=no
-
-
-# 3.279. sidebar_width
-#
-# Type: number
-# Default: 30
-#
-# This controls the width of the sidebar. It is measured in screen columns. For
-# example: sidebar_width=20 could display 20 ASCII characters, or 10 Chinese
-# characters.
-#
-set sidebar_width=20
-
-
-# 3.280. sig_dashes
-#
-# Type: boolean
-# Default: yes
-#
-# If set, a line containing “-- ” (note the trailing space) will be inserted
-# before your $signature. It is strongly recommended that you not unset this
-# variable unless your signature contains just your name. The reason for this is
-# because many software packages use “-- n” to detect your signature. For
-# example, Mutt has the ability to highlight the signature in a different color
-# in the built-in pager.
-#
-set sig_dashes=no
-
-
-# 3.281. sig_on_top
-#
-# Type: boolean
-# Default: no
-#
-# If set, the signature will be included before any quoted or forwarded text. It
-# is strongly recommended that you do not set this variable unless you really
-# know what you are doing, and are prepared to take some heat from netiquette
-# guardians.
-#
-
-
-# 3.282. signature
-#
-# Type: path
-# Default: “~/.signature”
-#
-# Specifies the filename of your signature, which is appended to all outgoing
-# messages. If the filename ends with a pipe (“|”), it is assumed that filename
-# is a shell command and input should be read from its standard output.
-#
-
-
-# 3.283. simple_search
-#
-# Type: string
-# Default: “~f %s | ~s %s”
-#
-# Specifies how Mutt should expand a simple search into a real search pattern. A
-# simple search is one that does not contain any of the “~” pattern operators.
-# See “patterns” for more information on search patterns.
-#
-# For example, if you simply type “joe” at a search or limit prompt, Mutt will
-# automatically expand it to the value specified by this variable by replacing “
-# %s” with the supplied string. For the default value, “joe” would be expanded
-# to: “~f joe | ~s joe”.
-#
-set simple_search="~L %s | ~s %s"
-
-
-# 3.284. sleep_time
-#
-# Type: number
-# Default: 1
-#
-# Specifies time, in seconds, to pause while displaying certain informational
-# messages, while moving from folder to folder and after expunging messages from
-# the current folder. The default is to pause one second, so a value of zero for
-# this option suppresses the pause.
-#
-
-
-# 3.285. smart_wrap
-#
-# Type: boolean
-# Default: yes
-#
-# Controls the display of lines longer than the screen width in the internal
-# pager. If set, long lines are wrapped at a word boundary. If unset, lines are
-# simply wrapped at the screen edge. Also see the $markers variable.
-#
-
-
-# 3.286. smileys
-#
-# Type: regular expression
-# Default: “(>From )|(:[-^]?[][)(><}{|/DP])”
-#
-# The pager uses this variable to catch some common false positives of
-# $quote_regexp, most notably smileys and not consider a line quoted text if it
-# also matches $smileys. This mostly happens at the beginning of a line.
-#
-
-
-# 3.287. smime_ask_cert_label
-#
-# Type: boolean
-# Default: yes
-#
-# This flag controls whether you want to be asked to enter a label for a
-# certificate about to be added to the database or not. It is set by default. (S/
-# MIME only)
-#
-
-
-# 3.288. smime_ca_location
-#
-# Type: path
-# Default: (empty)
-#
-# This variable contains the name of either a directory, or a file which contains
-# trusted certificates for use with OpenSSL. (S/MIME only)
-#
-
-
-# 3.289. smime_certificates
-#
-# Type: path
-# Default: (empty)
-#
-# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
-# storage and retrieval of keys by itself. This is very basic right now, and keys
-# and certificates are stored in two different directories, both named as the
-# hash-value retrieved from OpenSSL. There is an index file which contains
-# mailbox-address keyid pairs, and which can be manually edited. This option
-# points to the location of the certificates. (S/MIME only)
-#
-set smime_certificates="~/.smime/certificates"
-
-
-# 3.290. smime_decrypt_command
-#
-# Type: string
-# Default: (empty)
-#
-# This format string specifies a command which is used to decrypt application/
-# x-pkcs7-mime attachments.
-#
-# The OpenSSL command formats have their own set of printf(3)-like sequences
-# similar to PGP's:
-#
-# ┌──┬──────────────────────────────────────────────────────────────────────────┐
-# │%f│Expands to the name of a file containing a message. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%s│Expands to the name of a file containing the signature part of a multipart│
-# │ │/signed attachment when verifying it. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%k│The key-pair specified with $smime_default_key │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%c│One or more certificate IDs. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%a│The algorithm used for encryption. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │%d│The message digest algorithm specified with $smime_sign_digest_alg. │
-# ├──┼──────────────────────────────────────────────────────────────────────────┤
-# │ │CA location: Depending on whether $smime_ca_location points to a directory│
-# │%C│or file, this expands to “-CApath $smime_ca_location” or “-CAfile │
-# │ │$smime_ca_location”. │
-# └──┴──────────────────────────────────────────────────────────────────────────┘
-#
-# For examples on how to configure these formats, see the smime.rc in the samples
-# / subdirectory which has been installed on your system alongside the
-# documentation. (S/MIME only)
-#
-
-
-# 3.291. smime_decrypt_use_default_key
-#
-# Type: boolean
-# Default: yes
-#
-# If set (default) this tells mutt to use the default key for decryption.
-# Otherwise, if managing multiple certificate-key-pairs, mutt will try to use the
-# mailbox-address to determine the key to use. It will ask you to supply a key,
-# if it can't find one. (S/MIME only)
-#
-
-
-# 3.292. smime_default_key
-#
-# Type: string
-# Default: (empty)
-#
-# This is the default key-pair to use for S/MIME operations, and must be set to
-# the keyid (the hash-value that OpenSSL generates) to work properly.
-#
-# It will be used for encryption (see $postpone_encrypt and $smime_self_encrypt).
-#
-# It will be used for decryption unless $smime_decrypt_use_default_key is unset.
-#
-# It will also be used for signing unless $smime_sign_as is set.
-#
-# The (now deprecated) smime_self_encrypt_as is an alias for this variable, and
-# should no longer be used. (S/MIME only)
-#
-
-
-# 3.293. smime_encrypt_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to create encrypted S/MIME messages.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.294. smime_encrypt_with
-#
-# Type: string
-# Default: “aes256”
-#
-# This sets the algorithm that should be used for encryption. Valid choices are “
-# aes128”, “aes192”, “aes256”, “des”, “des3”, “rc2-40”, “rc2-64”, “rc2-128”. (S/
-# MIME only)
-#
-
-
-# 3.295. smime_get_cert_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to extract X509 certificates from a PKCS7 structure.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.296. smime_get_cert_email_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to extract the mail address(es) used for storing X509
-# certificates, and for verification purposes (to check whether the certificate
-# was issued for the sender's mailbox).
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.297. smime_get_signer_cert_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to extract only the signers X509 certificate from a S/MIME
-# signature, so that the certificate's owner may get compared to the email's “
-# From:” field.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.298. smime_import_cert_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to import a certificate via smime_keys.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.299. smime_is_default
-#
-# Type: boolean
-# Default: no
-#
-# The default behavior of mutt is to use PGP on all auto-sign/encryption
-# operations. To override and to use OpenSSL instead this must be set. However,
-# this has no effect while replying, since mutt will automatically select the
-# same application that was used to sign/encrypt the original message. (Note that
-# this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only)
-#
-
-
-# 3.300. smime_keys
-#
-# Type: path
-# Default: (empty)
-#
-# Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle
-# storage and retrieval of keys/certs by itself. This is very basic right now,
-# and stores keys and certificates in two different directories, both named as
-# the hash-value retrieved from OpenSSL. There is an index file which contains
-# mailbox-address keyid pair, and which can be manually edited. This option
-# points to the location of the private keys. (S/MIME only)
-#
-set smime_keys="~/.smime/keys"
-
-
-# 3.301. smime_pk7out_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to extract PKCS7 structures of S/MIME signatures, in order
-# to extract the public X509 certificate(s).
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.302. smime_self_encrypt
-#
-# Type: boolean
-# Default: yes
-#
-# When set, S/MIME encrypted messages will also be encrypted using the
-# certificate in $smime_default_key. (S/MIME only)
-#
-
-
-# 3.303. smime_sign_as
-#
-# Type: string
-# Default: (empty)
-#
-# If you have a separate key to use for signing, you should set this to the
-# signing key. Most people will only need to set $smime_default_key. (S/MIME
-# only)
-#
-
-
-# 3.304. smime_sign_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to created S/MIME signatures of type multipart/signed,
-# which can be read by all mail clients.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. NOTE: %c and %k will default to $smime_sign_as if
-# set, otherwise $smime_default_key. (S/MIME only)
-#
-
-
-# 3.305. smime_sign_digest_alg
-#
-# Type: string
-# Default: “sha256”
-#
-# This sets the algorithm that should be used for the signature message digest.
-# Valid choices are “md5”, “sha1”, “sha224”, “sha256”, “sha384”, “sha512”. (S/
-# MIME only)
-#
-
-
-# 3.306. smime_sign_opaque_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to created S/MIME signatures of type application/
-# x-pkcs7-signature, which can only be handled by mail clients supporting the S/
-# MIME extension.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.307. smime_timeout
-#
-# Type: number
-# Default: 300
-#
-# The number of seconds after which a cached passphrase will expire if not used.
-# (S/MIME only)
-#
-
-
-# 3.308. smime_verify_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to verify S/MIME signatures of type multipart/signed.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.309. smime_verify_opaque_command
-#
-# Type: string
-# Default: (empty)
-#
-# This command is used to verify S/MIME signatures of type application/
-# x-pkcs7-mime.
-#
-# This is a format string, see the $smime_decrypt_command command for possible
-# printf(3)-like sequences. (S/MIME only)
-#
-
-
-# 3.310. smtp_authenticators
-#
-# Type: string
-# Default: (empty)
-#
-# This is a colon-delimited list of authentication methods mutt may attempt to
-# use to log in to an SMTP server, in the order mutt should try them.
-# Authentication methods are any SASL mechanism, e.g. “digest-md5”, “gssapi” or “
-# cram-md5”. This option is case-insensitive. If it is “unset” (the default) mutt
-# will try all available methods, in order from most-secure to least-secure.
-#
-# Example:
-#
-# set smtp_authenticators="digest-md5:cram-md5"
-#
-
-
-# 3.311. smtp_oauth_refresh_command
-#
-# Type: string
-# Default: (empty)
-#
-# The command to run to generate an OAUTH refresh token for authorizing your
-# connection to your SMTP server. This command will be run on every connection
-# attempt that uses the OAUTHBEARER authentication mechanism.
-#
-
-
-# 3.312. smtp_pass
-#
-# Type: string
-# Default: (empty)
-#
-# Specifies the password for your SMTP account. If unset, Mutt will prompt you
-# for your password when you first send mail via SMTP. See $smtp_url to configure
-# mutt to send mail via SMTP.
-#
-# Warning: you should only use this option when you are on a fairly secure
-# machine, because the superuser can read your muttrc even if you are the only
-# one who can read the file.
-#
-
-
-# 3.313. smtp_url
-#
-# Type: string
-# Default: (empty)
-#
-# Defines the SMTP smarthost where sent messages should relayed for delivery.
-# This should take the form of an SMTP URL, e.g.:
-#
-# smtp[s]://[user[:pass]@]host[:port]
-#
-# where “[...]” denotes an optional part. Setting this variable overrides the
-# value of the $sendmail variable.
-#
-
-
-# 3.314. sort
-#
-# Type: sort order
-# Default: date
-#
-# Specifies how to sort messages in the “index” menu. Valid values are:
-#
-# • date or date-sent
-#
-# • date-received
-#
-# • from
-#
-# • mailbox-order (unsorted)
-#
-# • score
-#
-# • size
-#
-# • spam
-#
-# • subject
-#
-# • threads
-#
-# • to
-#
-# You may optionally use the “reverse-” prefix to specify reverse sorting order
-# (example: “set sort=reverse-date-sent”).
-#
-set sort=threads
-
-
-# 3.315. sort_alias
-#
-# Type: sort order
-# Default: alias
-#
-# Specifies how the entries in the “alias” menu are sorted. The following are
-# legal values:
-#
-# • address (sort alphabetically by email address)
-#
-# • alias (sort alphabetically by alias name)
-#
-# • unsorted (leave in order specified in .muttrc)
-#
-
-
-# 3.316. sort_aux
-#
-# Type: sort order
-# Default: date
-#
-# When sorting by threads, this variable controls how threads are sorted in
-# relation to other threads, and how the branches of the thread trees are sorted.
-# This can be set to any value that $sort can, except “threads” (in that case,
-# mutt will just use “date-sent”). You can also specify the “last-” prefix in
-# addition to the “reverse-” prefix, but “last-” must come after “reverse-”. The
-# “last-” prefix causes messages to be sorted against its siblings by which has
-# the last descendant, using the rest of $sort_aux as an ordering. For instance,
-#
-# set sort_aux=last-date-received
-#
-# would mean that if a new message is received in a thread, that thread becomes
-# the last one displayed (or the first, if you have “set sort=reverse-threads”.)
-#
-# Note: For reversed $sort order $sort_aux is reversed again (which is not the
-# right thing to do, but kept to not break any existing configuration setting).
-#
-set sort_aux=last-date-received
-
-
-# 3.317. sort_browser
-#
-# Type: sort order
-# Default: alpha
-#
-# Specifies how to sort entries in the file browser. By default, the entries are
-# sorted alphabetically. Valid values:
-#
-# • alpha (alphabetically)
-#
-# • count
-#
-# • date
-#
-# • size
-#
-# • unread
-#
-# • unsorted
-#
-# You may optionally use the “reverse-” prefix to specify reverse sorting order
-# (example: “set sort_browser=reverse-date”).
-#
-
-
-# 3.318. sort_re
-#
-# Type: boolean
-# Default: yes
-#
-# This variable is only useful when sorting by threads with $strict_threads unset
-# . In that case, it changes the heuristic mutt uses to thread messages by
-# subject. With $sort_re set, mutt will only attach a message as the child of
-# another message by subject if the subject of the child message starts with a
-# substring matching the setting of $reply_regexp. With $sort_re unset, mutt will
-# attach the message whether or not this is the case, as long as the non-
-# $reply_regexp parts of both messages are identical.
-#
-
-
-# 3.319. spam_separator
-#
-# Type: string
-# Default: “,”
-#
-# This variable controls what happens when multiple spam headers are matched: if
-# unset, each successive header will overwrite any previous matches value for the
-# spam label. If set, each successive match will append to the previous, using
-# this variable's value as a separator.
-#
-
-
-# 3.320. spoolfile
-#
-# Type: path
-# Default: (empty)
-#
-# If your spool mailbox is in a non-default place where Mutt cannot find it, you
-# can specify its location with this variable. Mutt will initially set this
-# variable to the value of the environment variable $MAIL or $MAILDIR if either
-# is defined.
-#
-set spoolfile="=inbox"
-
-
-# 3.321. ssl_ca_certificates_file
-#
-# Type: path
-# Default: (empty)
-#
-# This variable specifies a file containing trusted CA certificates. Any server
-# certificate that is signed with one of these CA certificates is also
-# automatically accepted. (GnuTLS only)
-#
-# Example:
-#
-# set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
-#
-set ssl_ca_certificates_file="/etc/ssl/certs/ca-certificates.crt"
-
-
-# 3.322. ssl_client_cert
-#
-# Type: path
-# Default: (empty)
-#
-# The file containing a client certificate and its associated private key.
-#
-
-
-# 3.323. ssl_force_tls
-#
-# Type: boolean
-# Default: no
-#
-# If this variable is set, Mutt will require that all connections to remote
-# servers be encrypted. Furthermore it will attempt to negotiate TLS even if the
-# server does not advertise the capability, since it would otherwise have to
-# abort the connection anyway. This option supersedes $ssl_starttls.
-#
-
-
-# 3.324. ssl_min_dh_prime_bits
-#
-# Type: number
-# Default: 0
-#
-# This variable specifies the minimum acceptable prime size (in bits) for use in
-# any Diffie-Hellman key exchange. A value of 0 will use the default from the
-# GNUTLS library. (GnuTLS only)
-#
-
-
-# 3.325. ssl_starttls
-#
-# Type: quadoption
-# Default: yes
-#
-# If set (the default), mutt will attempt to use STARTTLS on servers advertising
-# the capability. When unset, mutt will not attempt to use STARTTLS regardless of
-# the server's capabilities.
-#
-
-
-# 3.326. ssl_use_sslv2
-#
-# Type: boolean
-# Default: no
-#
-# This variable specifies whether to attempt to use SSLv2 in the SSL
-# authentication process. Note that SSLv2 and SSLv3 are now considered
-# fundamentally insecure and are no longer recommended. (OpenSSL only)
-#
-
-
-# 3.327. ssl_use_sslv3
-#
-# Type: boolean
-# Default: no
-#
-# This variable specifies whether to attempt to use SSLv3 in the SSL
-# authentication process. Note that SSLv2 and SSLv3 are now considered
-# fundamentally insecure and are no longer recommended.
-#
-
-
-# 3.328. ssl_use_tlsv1
-#
-# Type: boolean
-# Default: yes
-#
-# This variable specifies whether to attempt to use TLSv1.0 in the SSL
-# authentication process.
-#
-
-
-# 3.329. ssl_use_tlsv1_1
-#
-# Type: boolean
-# Default: yes
-#
-# This variable specifies whether to attempt to use TLSv1.1 in the SSL
-# authentication process.
-#
-
-
-# 3.330. ssl_use_tlsv1_2
-#
-# Type: boolean
-# Default: yes
-#
-# This variable specifies whether to attempt to use TLSv1.2 in the SSL
-# authentication process.
-#
-
-
-# 3.331. ssl_usesystemcerts
-#
-# Type: boolean
-# Default: yes
-#
-# If set to yes, mutt will use CA certificates in the system-wide certificate
-# store when checking if a server certificate is signed by a trusted CA. (OpenSSL
-# only)
-#
-
-
-# 3.332. ssl_verify_dates
-#
-# Type: boolean
-# Default: yes
-#
-# If set (the default), mutt will not automatically accept a server certificate
-# that is either not yet valid or already expired. You should only unset this for
-# particular known hosts, using the <account-hook> function.
-#
-
-
-# 3.333. ssl_verify_host
-#
-# Type: boolean
-# Default: yes
-#
-# If set (the default), mutt will not automatically accept a server certificate
-# whose host name does not match the host used in your folder URL. You should
-# only unset this for particular known hosts, using the <account-hook> function.
-#
-
-
-# 3.334. ssl_verify_partial_chains
-#
-# Type: boolean
-# Default: no
-#
-# This option should not be changed from the default unless you understand what
-# you are doing.
-#
-# Setting this variable to yes will permit verifying partial certification
-# chains, i. e. a certificate chain where not the root, but an intermediate
-# certificate CA, or the host certificate, are marked trusted (in
-# $certificate_file), without marking the root signing CA as trusted.
-#
-# (OpenSSL 1.0.2b and newer only).
-#
-
-
-# 3.335. ssl_ciphers
-#
-# Type: string
-# Default: (empty)
-#
-# Contains a colon-seperated list of ciphers to use when using SSL. For OpenSSL,
-# see ciphers(1) for the syntax of the string.
-#
-# For GnuTLS, this option will be used in place of "NORMAL" at the start of the
-# priority string. See gnutls_priority_init(3) for the syntax and more details.
-# (Note: GnuTLS version 2.1.7 or higher is required.)
-#
-
-
-# 3.336. status_chars
-#
-# Type: string
-# Default: “-*%A”
-#
-# Controls the characters used by the “%r” indicator in $status_format. The first
-# character is used when the mailbox is unchanged. The second is used when the
-# mailbox has been changed, and it needs to be resynchronized. The third is used
-# if the mailbox is in read-only mode, or if the mailbox will not be written when
-# exiting that mailbox (You can toggle whether to write changes to a mailbox with
-# the <toggle-write> operation, bound by default to “%”). The fourth is used to
-# indicate that the current folder has been opened in attach- message mode
-# (Certain operations like composing a new mail, replying, forwarding, etc. are
-# not permitted in this mode).
-#
-
-
-# 3.337. status_format
-#
-# Type: string
-# Default: “-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F?
-# Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---”
-#
-# Controls the format of the status line displayed in the “index” menu. This
-# string is similar to $index_format, but has its own set of printf(3)-like
-# sequences:
-#
-# ┌───┬─────────────────────────────────────────────────────────────────────────┐
-# │%b │number of mailboxes with new mail * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%d │number of deleted messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%f │the full pathname of the current mailbox │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%F │number of flagged messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%h │local hostname │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%l │size (in bytes) of the current mailbox * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%L │size (in bytes) of the messages shown (i.e., which match the current │
-# │ │limit) * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%m │the number of messages in the mailbox * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%M │the number of messages shown (i.e., which match the current limit) * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%n │number of new messages in the mailbox * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%o │number of old unread messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%p │number of postponed messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%P │percentage of the way through the index │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%r │modified/read-only/won't-write/attach-message indicator, according to │
-# │ │$status_chars │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%R │number of read messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%s │current sorting mode ($sort) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%S │current aux sorting method ($sort_aux) │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%t │number of tagged messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%u │number of unread messages * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%v │Mutt version string │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%V │currently active limit pattern, if any * │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%>X│right justify the rest of the string and pad with “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%|X│pad to the end of the line with “X” │
-# ├───┼─────────────────────────────────────────────────────────────────────────┤
-# │%*X│soft-fill with character “X” as pad │
-# └───┴─────────────────────────────────────────────────────────────────────────┘
-#
-# For an explanation of “soft-fill”, see the $index_format documentation.
-#
-# * = can be optionally printed if nonzero
-#
-# Some of the above sequences can be used to optionally print a string if their
-# value is nonzero. For example, you may only want to see the number of flagged
-# messages if such messages exist, since zero is not particularly meaningful. To
-# optionally print a string based upon one of the above sequences, the following
-# construct is used:
-#
-# %?<sequence_char>?<optional_string>?
-#
-# where sequence_char is a character from the table above, and optional_string is
-# the string you would like printed if sequence_char is nonzero. optional_string
-# may contain other sequences as well as normal text, but you may not nest
-# optional strings.
-#
-# Here is an example illustrating how to optionally print the number of new
-# messages in a mailbox:
-#
-# %?n?%n new messages.?
-#
-# You can also switch between two strings using the following construct:
-#
-# %?<sequence_char>?<if_string>&<else_string>?
-#
-# If the value of sequence_char is non-zero, if_string will be expanded,
-# otherwise else_string will be expanded.
-#
-# You can force the result of any printf(3)-like sequence to be lowercase by
-# prefixing the sequence character with an underscore (“_”) sign. For example, if
-# you want to display the local hostname in lowercase, you would use: “%_h”.
-#
-# If you prefix the sequence character with a colon (“:”) character, mutt will
-# replace any dots in the expansion by underscores. This might be helpful with
-# IMAP folders that don't like dots in folder names.
-#
-set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) "
-
-
-# 3.338. status_on_top
-#
-# Type: boolean
-# Default: no
-#
-# Setting this variable causes the “status bar” to be displayed on the first line
-# of the screen rather than near the bottom. If $help is set, too it'll be placed
-# at the bottom.
-#
-
-
-# 3.339. strict_threads
-#
-# Type: boolean
-# Default: no
-#
-# If set, threading will only make use of the “In-Reply-To” and “References:”
-# fields when you $sort by message threads. By default, messages with the same
-# subject are grouped together in “pseudo threads.”. This may not always be
-# desirable, such as in a personal mailbox where you might have several unrelated
-# messages with the subjects like “hi” which will get grouped together. See also
-# $sort_re for a less drastic way of controlling this behavior.
-#
-set strict_threads=yes
-
-
-# 3.340. suspend
-#
-# Type: boolean
-# Default: yes
-#
-# When unset, mutt won't stop when the user presses the terminal's susp key,
-# usually “^Z”. This is useful if you run mutt inside an xterm using a command
-# like “xterm -e mutt”.
-#
-
-
-# 3.341. text_flowed
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will generate “format=flowed” bodies with a content type of “
-# text/plain; format=flowed”. This format is easier to handle for some mailing
-# software, and generally just looks like ordinary text. To actually make use of
-# this format's features, you'll need support in your editor.
-#
-# Note that $indent_string is ignored when this option is set.
-#
-set text_flowed=yes
-
-
-# 3.342. thorough_search
-#
-# Type: boolean
-# Default: yes
-#
-# Affects the ~b and ~h search operations described in section “patterns”. If set
-# , the headers and body/attachments of messages to be searched are decoded
-# before searching. If unset, messages are searched as they appear in the folder.
-#
-# Users searching attachments or for non-ASCII characters should set this value
-# because decoding also includes MIME parsing/decoding and possible character set
-# conversions. Otherwise mutt will attempt to match against the raw message
-# received (for example quoted-printable encoded or with encoded headers) which
-# may lead to incorrect search results.
-#
-set thorough_search=yes
-
-
-# 3.343. thread_received
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt uses the date received rather than the date sent to thread
-# messages by subject.
-#
-set thread_received=yes
-
-
-# 3.344. tilde
-#
-# Type: boolean
-# Default: no
-#
-# When set, the internal-pager will pad blank lines to the bottom of the screen
-# with a tilde (“~”).
-#
-set tilde=yes
-
-
-# 3.345. time_inc
-#
-# Type: number
-# Default: 0
-#
-# Along with $read_inc, $write_inc, and $net_inc, this variable controls the
-# frequency with which progress updates are displayed. It suppresses updates less
-# than $time_inc milliseconds apart. This can improve throughput on systems with
-# slow terminals, or when running mutt on a remote system.
-#
-# Also see the “tuning” section of the manual for performance considerations.
-#
-set time_inc=250
-
-
-# 3.346. timeout
-#
-# Type: number
-# Default: 600
-#
-# When Mutt is waiting for user input either idling in menus or in an interactive
-# prompt, Mutt would block until input is present. Depending on the context, this
-# would prevent certain operations from working, like checking for new mail or
-# keeping an IMAP connection alive.
-#
-# This variable controls how many seconds Mutt will at most wait until it aborts
-# waiting for input, performs these operations and continues to wait for input.
-#
-# A value of zero or less will cause Mutt to never time out.
-#
-
-
-# 3.347. tmpdir
-#
-# Type: path
-# Default: (empty)
-#
-# This variable allows you to specify where Mutt will place its temporary files
-# needed for displaying and composing messages. If this variable is not set, the
-# environment variable $TMPDIR is used. If $TMPDIR is not set then “/tmp” is
-# used.
-#
-
-
-# 3.348. to_chars
-#
-# Type: string
-# Default: “ +TCFL”
-#
-# Controls the character used to indicate mail addressed to you. The first
-# character is the one used when the mail is not addressed to your address. The
-# second is used when you are the only recipient of the message. The third is
-# when your address appears in the “To:” header field, but you are not the only
-# recipient of the message. The fourth character is used when your address is
-# specified in the “Cc:” header field, but you are not the only recipient. The
-# fifth character is used to indicate mail that was sent by you. The sixth
-# character is used to indicate when a mail was sent to a mailing-list you
-# subscribe to.
-#
-
-
-# 3.349. trash
-#
-# Type: path
-# Default: (empty)
-#
-# If set, this variable specifies the path of the trash folder where the mails
-# marked for deletion will be moved, instead of being irremediably purged.
-#
-# NOTE: When you delete a message in the trash folder, it is really deleted, so
-# that you have a way to clean the trash.
-#
-
-
-# 3.350. ts_icon_format
-#
-# Type: string
-# Default: “M%?n?AIL&ail?”
-#
-# Controls the format of the icon title, as long as “$ts_enabled” is set. This
-# string is identical in formatting to the one used by “$status_format”.
-#
-
-
-# 3.351. ts_enabled
-#
-# Type: boolean
-# Default: no
-#
-# Controls whether mutt tries to set the terminal status line and icon name. Most
-# terminal emulators emulate the status line in the window title.
-#
-set ts_enabled=yes
-
-
-# 3.352. ts_status_format
-#
-# Type: string
-# Default: “Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?”
-#
-# Controls the format of the terminal status line (or window title), provided
-# that “$ts_enabled” has been set. This string is identical in formatting to the
-# one used by “$status_format”.
-#
-set ts_status_format="[`tty|sed -re 's,.+pts/,,'`]mutt@%h%r %f%?V?[%V]&?"
-
-
-# 3.353. tunnel
-#
-# Type: string
-# Default: (empty)
-#
-# Setting this variable will cause mutt to open a pipe to a command instead of a
-# raw socket. You may be able to use this to set up preauthenticated connections
-# to your IMAP/POP3/SMTP server. Example:
-#
-# set tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
-#
-# Note: For this example to work you must be able to log in to the remote machine
-# without having to enter a password.
-#
-# When set, Mutt uses the tunnel for all remote connections. Please see “
-# account-hook” in the manual for how to use different tunnel commands per
-# connection.
-#
-
-
-# 3.354. uncollapse_jump
-#
-# Type: boolean
-# Default: no
-#
-# When set, Mutt will jump to the next unread message, if any, when the current
-# thread is uncollapsed.
-#
-
-
-# 3.355. uncollapse_new
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will automatically uncollapse any collapsed thread that receives
-# a new message. When unset, collapsed threads will remain collapsed. the
-# presence of the new message will still affect index sorting, though.
-#
-
-
-# 3.356. use_8bitmime
-#
-# Type: boolean
-# Default: no
-#
-# Warning: do not set this variable unless you are using a version of sendmail
-# which supports the -B8BITMIME flag (such as sendmail 8.8.x) or you may not be
-# able to send mail.
-#
-# When set, Mutt will invoke $sendmail with the -B8BITMIME flag when sending
-# 8-bit messages to enable ESMTP negotiation.
-#
-
-
-# 3.357. use_domain
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will qualify all local addresses (ones without the “@host”
-# portion) with the value of $hostname. If unset, no addresses will be qualified.
-#
-
-
-# 3.358. use_envelope_from
-#
-# Type: boolean
-# Default: no
-#
-# When set, mutt will set the envelope sender of the message. If
-# $envelope_from_address is set, it will be used as the sender address. If unset,
-# mutt will attempt to derive the sender from the “From:” header.
-#
-# Note that this information is passed to sendmail command using the -f command
-# line switch. Therefore setting this option is not useful if the $sendmail
-# variable already contains -f or if the executable pointed to by $sendmail
-# doesn't support the -f switch.
-#
-set use_envelope_from=yes
-
-
-# 3.359. use_from
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will generate the “From:” header field when sending messages. If
-# unset, no “From:” header field will be generated unless the user explicitly
-# sets one using the “my_hdr” command.
-#
-
-
-# 3.360. use_ipv6
-#
-# Type: boolean
-# Default: yes
-#
-# When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If
-# this option is unset, Mutt will restrict itself to IPv4 addresses. Normally,
-# the default should work.
-#
-
-
-# 3.361. user_agent
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will add a “User-Agent:” header to outgoing messages, indicating
-# which version of mutt was used for composing them.
-#
-
-
-# 3.362. visual
-#
-# Type: path
-# Default: (empty)
-#
-# Specifies the visual editor to invoke when the “~v” command is given in the
-# built-in editor.
-#
-
-
-# 3.363. wait_key
-#
-# Type: boolean
-# Default: yes
-#
-# Controls whether Mutt will ask you to press a key after an external command has
-# been invoked by these functions: <shell-escape>, <pipe-message>, <pipe-entry>,
-# <print-message>, and <print-entry> commands.
-#
-# It is also used when viewing attachments with “auto_view”, provided that the
-# corresponding mailcap entry has a needsterminal flag, and the external program
-# is interactive.
-#
-# When set, Mutt will always ask for a key. When unset, Mutt will wait for a key
-# only if the external command returned a non-zero status.
-#
-set wait_key=no
-
-
-# 3.364. weed
-#
-# Type: boolean
-# Default: yes
-#
-# When set, mutt will weed headers when displaying, forwarding, printing, or
-# replying to messages.
-#
-
-
-# 3.365. wrap
-#
-# Type: number
-# Default: 0
-#
-# When set to a positive value, mutt will wrap text at $wrap characters. When set
-# to a negative value, mutt will wrap text so that there are $wrap characters of
-# empty space on the right side of the terminal. Setting it to zero makes mutt
-# wrap at the terminal width.
-#
-# Also see $reflow_wrap.
-#
-set wrap=$reflow_wrap
-
-
-# 3.366. wrap_headers
-#
-# Type: number
-# Default: 78
-#
-# This option specifies the number of characters to use for wrapping an outgoing
-# message's headers. Allowed values are between 78 and 998 inclusive.
-#
-# Note: This option usually shouldn't be changed. RFC5233 recommends a line
-# length of 78 (the default), so please only change this setting when you know
-# what you're doing.
-#
-
-
-# 3.367. wrap_search
-#
-# Type: boolean
-# Default: yes
-#
-# Controls whether searches wrap around the end.
-#
-# When set, searches will wrap around the first (or last) item. When unset,
-# incremental searches will not wrap.
-#
-
-
-# 3.368. wrapmargin
-#
-# Type: number
-# Default: 0
-#
-# (DEPRECATED) Equivalent to setting $wrap with a negative value.
-#
-
-
-# 3.369. write_bcc
-#
-# Type: boolean
-# Default: yes
-#
-# Controls whether mutt writes out the “Bcc:” header when preparing messages to
-# be sent. Exim users may wish to unset this. If mutt is set to deliver directly
-# via SMTP (see $smtp_url), this option does nothing: mutt will never write out
-# the “Bcc:” header in this case.
-#
-
-
-# 3.370. write_inc
-#
-# Type: number
-# Default: 10
-#
-# When writing a mailbox, a message will be printed every $write_inc messages to
-# indicate progress. If set to 0, only a single message will be displayed before
-# writing a mailbox.
-#
-# Also see the $read_inc, $net_inc and $time_inc variables and the “tuning”
-# section of the manual for performance considerations.
-#
-
-# vim:sw=12:noet:sts=12:ts=12:ft=muttrc
projects / etc / mutt.git / blobdiff