All patches and comments are welcome. Please squash your changes to logical
commits before using git-format-patch and git-send-email to
patches@git.madduck.net.
If you'd read over the Git project's submission guidelines and adhered to them,
I'd be especially grateful.
1 # from /usr/share/doc/mutt/examples/Muttrc.gz
3 set my_confdir="$HOME/.mutt"
5 # set abort_nosubject=ask-yes
7 # Name: abort_nosubject
12 # If set to yes, when composing messages and no subject is given
13 # at the subject prompt, composition will be aborted. If set to
14 # no, composing messages with no subject given at the subject
15 # prompt will never be aborted.
18 # set abort_unmodified=yes
20 # Name: abort_unmodified
25 # If set to yes, composition will automatically abort after
26 # editing the message body if no changes are made to the file (this
27 # check only happens after the first edit of the file). When set
28 # to no, composition will never be aborted.
31 # set alias_file="~/.muttrc"
35 # Default: "~/.muttrc"
38 # The default file in which to save aliases created by the
39 # ``create-alias'' function.
41 # Note: Mutt will not automatically source this file; you must
42 # explicitly use the ``source'' command for it to be executed.
44 # The default for this option is the currently used muttrc file, or
45 # ``~/.muttrc'' if no user muttrc was found.
48 # set alias_format="%4n %2f %t %-10a %r"
52 # Default: "%4n %2f %t %-10a %r"
55 # Specifies the format of the data displayed for the `alias' menu. The
56 # following printf(3)-style sequences are available:
59 # %f flags - currently, a "d" for an alias marked for deletion
61 # %r address which alias expands to
62 # %t character which indicates if the alias is tagged for inclusion
72 # Controls whether 8-bit data is converted to 7-bit using either Quoted-
73 # Printable or Base64 encoding when sending mail.
83 # Controls whether ANSI color codes in messages (and color tags in
84 # rich text messages) are to be interpreted.
85 # Messages containing these codes are rare, but if this option is set,
86 # their text will be colored accordingly. Note that this may override
87 # your color choices, and even present a security problem, since a
88 # message could include a line like "[-- PGP output follows ..." and
89 # give it the same color as your attachment color.
99 # When set, an arrow (``->'') will be used to indicate the current entry
100 # in menus instead of highlighting the whole line. On slow network or modem
101 # links this will make response faster because there is less that has to
102 # be redrawn on the screen when moving to the next or previous entries
113 # If set, Mutt will use plain ASCII characters when displaying thread
114 # and attachment trees, instead of the default ACS characters.
124 # If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
125 # before editing an outgoing message.
135 # If set, Mutt will prompt you for carbon-copy (Cc) recipients before
136 # editing the body of an outgoing message.
139 # set assumed_charset=""
141 # Name: assumed_charset
146 # This variable is a colon-separated list of character encoding
147 # schemes for messages without character encoding indication.
148 # Header field values and message body content without character encoding
149 # indication would be assumed that they are written in one of this list.
150 # By default, all the header fields and message body without any charset
151 # indication are assumed to be in "us-ascii".
153 # For example, Japanese users might prefer this:
155 # set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
157 # However, only the first content is valid for the message body.
160 # set attach_charset=""
162 # Name: attach_charset
167 # This variable is a colon-separated list of character encoding
168 # schemes for text file attachments.
169 # If unset, $charset value will be used instead.
170 # For example, the following configuration would work for Japanese
173 # set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
175 # Note: "iso-2022-*" must be put at the head of the value as shown above
179 # set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
181 # Name: attach_format
183 # Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
186 # This variable describes the format of the `attachment' menu. The
187 # following printf-style sequences are understood:
190 # %c requires charset conversion (n or c)
193 # %e MIME content-transfer-encoding
195 # %I disposition (I=inline, A=attachment)
198 # %n attachment number
199 # %Q "Q", if MIME part qualifies for attachment counting
202 # %T graphic tree characters
203 # %u unlink (=to delete) flag
204 # %X number of qualifying MIME parts in this part and its children
205 # (please see the ``attachments'' section for possible speed effects)
206 # %>X right justify the rest of the string and pad with character "X"
207 # %|X pad to the end of the line with character "X"
208 # %*X soft-fill with character "X" as pad
211 # For an explanation of `soft-fill', see the ``$index_format'' documentation.
214 # set attach_sep="\n"
221 # The separator to add between attachments when operating (saving,
222 # printing, piping, etc) on a list of tagged attachments.
225 # set attach_split=yes
232 # If this variable is unset, when operating (saving, printing, piping,
233 # etc) on a list of tagged attachments, Mutt will concatenate the
234 # attachments and will operate on them as a single attachment. The
235 # ``$attach_sep'' separator is added after each attachment. When set,
236 # Mutt will operate on the attachments one by one.
239 # set attribution="On %d, %n wrote:"
243 # Default: "On %d, %n wrote:"
246 # This is the string that will precede a message which has been included
247 # in a reply. For a full listing of defined printf()-like sequences see
248 # the section on ``$index_format''.
250 set attribution="also sprach %n <%a> [%[%Y-%m-%d %H:%M %z]]:"
259 # When set along with ``$edit_headers'', Mutt will skip the initial
260 # send-menu and allow you to immediately begin editing the body of your
261 # message. The send-menu may still be accessed once you have finished
262 # editing the body of your message.
264 # Also see ``$fast_reply''.
275 # When set, functions in the index menu which affect a message
276 # will be applied to all tagged messages (if there are any). When
277 # unset, you must first use the tag-prefix function (default: ";") to
278 # make the next function apply to all tagged messages.
288 # When this variable is set, mutt will beep when an error occurs.
299 # When this variable is set, mutt will beep whenever it prints a message
300 # notifying you of new mail. This is independent of the setting of the
301 # ``$beep'' variable.
311 # Controls whether you will be asked to confirm bouncing messages.
312 # If set to yes you don't get asked if you want to bounce a
313 # message. Setting this variable to no is not generally useful,
314 # and thus not recommended, because you are unable to bounce messages.
317 # set bounce_delivered=yes
319 # Name: bounce_delivered
324 # When this variable is set, mutt will include Delivered-To headers when
325 # bouncing messages. Postfix users may wish to unset this variable.
327 # Note: On Debian systems, this option is unset by default in
331 # set braille_friendly=no
333 # Name: braille_friendly
338 # When this variable is set, mutt will place the cursor at the beginning
339 # of the current line in menus, even when the arrow_cursor variable
340 # is unset, making it easier for blind persons using Braille displays to
341 # follow these menus. The option is disabled by default because many
342 # visual terminals don't permit making the cursor invisible.
345 # set check_mbox_size=no
347 # Name: check_mbox_size
352 # When this variable is set, mutt will use file size attribute instead of
353 # access time when checking for new mail.
363 # Character set your terminal uses to display and enter textual data.
364 # It is also the fallback for $send_charset.
374 # Note: this option only affects maildir and MH style
377 # When set, Mutt will check for new mail delivered while the
378 # mailbox is open. Especially with MH mailboxes, this operation can
379 # take quite some time since it involves scanning the directory and
380 # checking each file to see if it has already been looked at. If
381 # check_new is unset, no check for new mail is performed
382 # while the mailbox is open.
385 # set collapse_unread=yes
387 # Name: collapse_unread
392 # When unset, Mutt will not collapse a thread if it contains any
396 # set uncollapse_jump=no
398 # Name: uncollapse_jump
403 # When set, Mutt will jump to the next unread message, if any,
404 # when the current thread is uncollapsed.
407 # set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
409 # Name: compose_format
411 # Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
414 # Controls the format of the status line displayed in the Compose
415 # menu. This string is similar to ``$status_format'', but has its own
416 # set of printf()-like sequences:
418 # %a total number of attachments
420 # %l approximate size (in bytes) of the current message
421 # %v Mutt version string
424 # See the text describing the ``$status_format'' option for more
425 # information on how to set ``$compose_format''.
428 # set config_charset=""
430 # Name: config_charset
435 # When defined, Mutt will recode commands in rc files from this
439 # set confirmappend=yes
441 # Name: confirmappend
446 # When set, Mutt will prompt for confirmation when appending messages to
447 # an existing mailbox.
451 # set confirmcreate=yes
453 # Name: confirmcreate
458 # When set, Mutt will prompt for confirmation when saving messages to a
459 # mailbox which does not yet exist before creating it.
462 # set connect_timeout=30
464 # Name: connect_timeout
469 # Causes Mutt to timeout a network connection (for IMAP or POP) after this
470 # many seconds if the connection is not able to be established. A negative
471 # value causes Mutt to wait indefinitely for the connection to succeed.
474 # set content_type="text/plain"
478 # Default: "text/plain"
481 # Sets the default Content-Type for the body of newly composed messages.
491 # This variable controls whether or not copies of your outgoing messages
492 # will be saved for later references. Also see ``$record'',
493 # ``$save_name'', ``$force_name'' and ``fcc-hook''.
497 # set crypt_use_gpgme=no
499 # Name: crypt_use_gpgme
504 # This variable controls the use of the GPGME-enabled crypto backends.
505 # If it is set and Mutt was built with gpgme support, the gpgme code for
506 # S/MIME and PGP will be used instead of the classic code. Note that
507 # you need to set this option in .muttrc; it won't have any effect when
508 # used interactively.
511 # set crypt_use_pka=no
513 # Name: crypt_use_pka
518 # (http://www.g10code.de/docs/pka-intro.de.pdf) during signature
519 # verification (only supported by the GPGME backend).
522 # set crypt_autopgp=yes
524 # Name: crypt_autopgp
529 # This variable controls whether or not mutt may automatically enable
530 # PGP encryption/signing for messages. See also ``$crypt_autoencrypt'',
531 # ``$crypt_replyencrypt'',
532 # ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
535 # set crypt_autosmime=yes
537 # Name: crypt_autosmime
542 # This variable controls whether or not mutt may automatically enable
543 # S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'',
544 # ``$crypt_replyencrypt'',
545 # ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
548 # set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
552 # Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
555 # This variable controls the format of the date printed by the ``%d''
556 # sequence in ``$index_format''. This is passed to the strftime
557 # call to process the date. See the man page for strftime(3) for
560 # Unless the first character in the string is a bang (``!''), the month
561 # and week day names are expanded according to the locale specified in
562 # the variable ``$locale''. If the first character in the string is a
563 # bang, the bang is discarded, and the month and week day names in the
564 # rest of the string are expanded in the C locale (that is in US
567 set date_format="%d %b %Y %T%Z"
569 # set default_hook="~f %s !~P | (~P ~C %s)"
573 # Default: "~f %s !~P | (~P ~C %s)"
576 # This variable controls how message-hooks, reply-hooks, send-hooks,
577 # send2-hooks, save-hooks, and fcc-hooks will
578 # be interpreted if they are specified with only a simple regexp,
579 # instead of a matching pattern. The hooks are expanded when they are
580 # declared, so a hook will be interpreted according to the value of this
581 # variable at the time the hook is declared. The default value matches
582 # if the message is either from a user matching the regular expression
583 # given, or if it is from you (if the from address matches
584 # ``alternates'') and is to or cc'ed to a user matching the given
585 # regular expression.
595 # Controls whether or not messages are really deleted when closing or
596 # synchronizing a mailbox. If set to yes, messages marked for
597 # deleting will automatically be purged without prompting. If set to
598 # no, messages marked for deletion will be kept in the mailbox.
602 # set delete_untag=yes
609 # If this option is set, mutt will untag messages when marking them
610 # for deletion. This applies when you either explicitly delete a message,
611 # or when you save it to another folder.
614 # set digest_collapse=yes
616 # Name: digest_collapse
621 # If this option is set, mutt's received-attachments menu will not show the subparts of
622 # individual messages in a multipart/digest. To see these subparts, press 'v' on that menu.
625 # set display_filter=""
627 # Name: display_filter
632 # When set, specifies a command used to filter messages. When a message
633 # is viewed it is passed as standard input to $display_filter, and the
634 # filtered message is read from the standard output.
637 # set dotlock_program="/usr/bin/mutt_dotlock"
639 # Name: dotlock_program
641 # Default: "/usr/bin/mutt_dotlock"
644 # Contains the path of the mutt_dotlock (8) binary to be used by
655 # This variable sets the request for when notification is returned. The
656 # string consists of a comma separated list (no spaces!) of one or more
657 # of the following: never, to never request notification,
658 # failure, to request notification on transmission failure,
659 # delay, to be notified of message delays, success, to be
660 # notified of successful transmission.
662 # Example: set dsn_notify="failure,delay"
664 # Note: when using $sendmail for delivery, you should not enable
665 # this unless you are either using Sendmail 8.8.x or greater or a MTA
666 # providing a sendmail(1)-compatible interface supporting the -N option
667 # for DSN. For SMTP delivery, it depends on the server whether DSN is
678 # This variable controls how much of your message is returned in DSN
679 # messages. It may be set to either hdrs to return just the
680 # message header, or full to return the full message.
682 # Example: set dsn_return=hdrs
684 # Note: when using $sendmail for delivery, you should not enable
685 # this unless you are either using Sendmail 8.8.x or greater or a MTA
686 # providing a sendmail(1)-compatible interface supporting the -R option
687 # for DSN. For SMTP delivery, it depends on the server whether DSN is
691 # set duplicate_threads=yes
693 # Name: duplicate_threads
698 # This variable controls whether mutt, when sorting by threads, threads
699 # messages with the same message-id together. If it is set, it will indicate
700 # that it thinks they are duplicates of each other with an equals sign
701 # in the thread diagram.
704 # set edit_headers=no
711 # This option allows you to edit the header of your outgoing messages
712 # along with the body of your message.
714 # Note that changes made to the References: and Date: headers are
715 # ignored for interoperability reasons.
726 # This variable specifies which editor is used by mutt.
727 # It defaults to the value of the VISUAL, or EDITOR, environment
728 # variable, or to the string "/usr/bin/editor" if neither of those are set.
730 set editor="mailplate --edit --auto --keep-unknown"
739 # When set, mutt will quoted-printable encode messages when
740 # they contain the string "From " in the beginning of a line.
741 # Useful to avoid the tampering certain mail delivery and transport
742 # agents tend to do with messages.
745 # set envelope_from_address=""
747 # Name: envelope_from_address
748 # Type: e-mail address
752 # Manually sets the envelope sender for outgoing messages.
753 # This value is ignored if ``$use_envelope_from'' is unset.
763 # Escape character to use for functions in the builtin editor.
773 # When set, the initial prompt for recipients and subject are skipped
774 # when replying to messages, and the initial prompt for subject is
775 # skipped when forwarding messages.
777 # Note: this variable has no effect when the ``$autoedit''
789 # This variable controls whether or not attachments on outgoing messages
790 # are saved along with the main body of your message.
801 # When this variable is set, FCCs will be stored unencrypted and
802 # unsigned, even when the actual message is encrypted and/or
807 # set folder="~/Mail"
814 # Specifies the default location of your mailboxes. A `+' or `=' at the
815 # beginning of a pathname will be expanded to the value of this
816 # variable. Note that if you change this variable from the default
817 # value you need to make sure that the assignment occurs before
818 # you use `+' or `=' for any other variables since expansion takes place
819 # during the `set' command.
823 # set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
825 # Name: folder_format
827 # Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
830 # This variable allows you to customize the file browser display to your
831 # personal taste. This string is similar to ``$index_format'', but has
832 # its own set of printf()-like sequences:
834 # %C current file number
835 # %d date/time folder was last modified
837 # %F file permissions
838 # %g group name (or numeric gid, if missing)
839 # %l number of hard links
840 # %N N if folder has new mail, blank otherwise
842 # %t * if the file is tagged, blank otherwise
843 # %u owner name (or numeric uid, if missing)
844 # %>X right justify the rest of the string and pad with character "X"
845 # %|X pad to the end of the line with character "X"
846 # %*X soft-fill with character "X" as pad
849 # For an explanation of `soft-fill', see the ``$index_format'' documentation.
852 # set followup_to=yes
858 # ## ENABLED BY A DEFAULT HOOK
860 # Controls whether or not the Mail-Followup-To header field is
861 # generated when sending mail. When set, Mutt will generate this
862 # field when you are replying to a known mailing list, specified with
863 # the ``subscribe'' or ``lists'' commands.
865 # This field has two purposes. First, preventing you from
866 # receiving duplicate copies of replies to messages which you send
867 # to mailing lists, and second, ensuring that you do get a reply
868 # separately for any messages sent to known lists to which you are
869 # not subscribed. The header will contain only the list's address
870 # for subscribed lists, and both the list address and your own
871 # email address for unsubscribed lists. Without this header, a
872 # group reply to your message sent to a subscribed list will be
873 # sent to both the list and your address, resulting in two copies
874 # of the same email for you.
884 # This variable is similar to ``$save_name'', except that Mutt will
885 # store a copy of your outgoing message by the username of the address
886 # you are sending to even if that mailbox does not exist.
888 # Also see the ``$record'' variable.
891 # set forward_decode=yes
893 # Name: forward_decode
898 # Controls the decoding of complex MIME messages into text/plain when
899 # forwarding a message. The message header is also RFC2047 decoded.
900 # This variable is only used, if ``$mime_forward'' is unset,
901 # otherwise ``$mime_forward_decode'' is used instead.
904 # set forward_edit=yes
911 # This quadoption controls whether or not the user is automatically
912 # placed in the editor when forwarding messages. For those who always want
913 # to forward with no modification, use a setting of ``no''.
916 # set forward_format="[%a: %s]"
918 # Name: forward_format
920 # Default: "[%a: %s]"
923 # This variable controls the default subject when forwarding a message.
924 # It uses the same format sequences as the ``$index_format'' variable.
926 set forward_format="(fwd) %s"
928 # set forward_quote=no
930 # Name: forward_quote
935 # When set forwarded messages included in the main body of the
936 # message (when ``$mime_forward'' is unset) will be quoted using
937 # ``$indent_string''.
943 # Type: e-mail address
947 # When set, this variable contains a default from address. It
948 # can be overridden using my_hdr (including from send-hooks) and
949 # ``$reverse_name''. This variable is ignored if ``$use_from''
952 # Defaults to the contents of the environment variable EMAIL.
954 set from='martin f krafft <madduck@madduck.net>'
956 # set gecos_mask="^[^,]*"
959 # Type: regular expression
963 # A regular expression used by mutt to parse the GECOS field of a password
964 # entry when expanding the alias. By default the regular expression is set
965 # to "^[^,]*" which will return the string up to the first "," encountered.
966 # If the GECOS field contains a string like "lastname, firstname" then you
967 # should set the gecos_mask=".*".
969 # This can be useful if you see the following behavior: you address a e-mail
970 # to user ID stevef whose full name is Steve Franklin. If mutt expands
971 # stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to
972 # a regular expression that will match the whole name so mutt will expand
973 # "Franklin" to "Franklin, Steve".
983 # When unset, the header fields normally added by the ``my_hdr''
984 # command are not created. This variable must be unset before
985 # composing a new message or replying in order to take effect. If set,
986 # the user defined header fields are added to every new message.
996 # When set, this variable causes Mutt to include the header
997 # of the message you are replying to into the edit buffer.
998 # The ``$weed'' setting applies.
1008 # When set, help lines describing the bindings for the major functions
1009 # provided by each menu are displayed on the first line of the screen.
1011 # Note: The binding will not be displayed correctly if the
1012 # function is bound to a sequence rather than a single keystroke. Also,
1013 # the help line may not be updated if a binding is changed while Mutt is
1014 # running. Since this variable is primarily aimed at new users, neither
1015 # of these should present a major problem.
1018 # set hidden_host=no
1025 # When set, mutt will skip the host name part of ``$hostname'' variable
1026 # when adding the domain part to addresses. This variable does not
1027 # affect the generation of Message-IDs, and it will not lead to the
1028 # cut-off of first-level domains.
1031 # set hide_limited=no
1033 # Name: hide_limited
1038 # When set, mutt will not show the presence of messages that are hidden
1039 # by limiting, in the thread tree.
1042 # set hide_missing=yes
1044 # Name: hide_missing
1049 # When set, mutt will not show the presence of missing messages in the
1053 # set hide_thread_subject=yes
1055 # Name: hide_thread_subject
1060 # When set, mutt will not show the subject of messages in the thread
1061 # tree that have the same subject as their parent or closest previously
1062 # displayed sibling.
1065 # set hide_top_limited=no
1067 # Name: hide_top_limited
1072 # When set, mutt will not show the presence of messages that are hidden
1073 # by limiting, at the top of threads in the thread tree. Note that when
1074 # $hide_limited is set, this option will have no effect.
1077 # set hide_top_missing=yes
1079 # Name: hide_top_missing
1084 # When set, mutt will not show the presence of missing messages at the
1085 # top of threads in the thread tree. Note that when $hide_missing is
1086 # set, this option will have no effect.
1096 # This variable controls the size (in number of strings remembered) of
1097 # the string history buffer. The buffer is cleared each time the
1101 # set history_file="~/.mutthistory"
1103 # Name: history_file
1105 # Default: "~/.mutthistory"
1108 # The file in which Mutt will save its history.
1110 set history_file="~/.var/mutt/history"
1112 # set honor_followup_to=yes
1114 # Name: honor_followup_to
1119 # This variable controls whether or not a Mail-Followup-To header is
1120 # honored when group-replying to a message.
1130 # Specifies the fully-qualified hostname of the system mutt is running on
1131 # containing the host's name and the DNS domain it belongs to. It is used
1132 # as the domain part (after ``@'') for local email addresses as well as
1133 # Message-Id headers.
1135 # Its value is determined at startup as follows: If the node's name
1136 # as returned by the uname(3) function contains the hostname and the
1137 # domain, these are used to construct $hostname. If there is no
1138 # domain part returned, Mutt will look for a ``domain'' or ``search''
1139 # line in /etc/resolv.conf to determine the domain. Optionally, Mutt
1140 # can be compiled with a fixed domain name in which case a detected
1143 # Also see ``$use_domain'' and ``$hidden_host''.
1145 # Note: On Debian systems, the default for this variable is obtained
1146 # from /etc/mailname when Mutt starts.
1149 # set ignore_linear_white_space=no
1151 # Name: ignore_linear_white_space
1156 # This option replaces linear-white-space between encoded-word
1157 # and *text to a single space to prevent the display of MIME-encoded
1158 # ``Subject'' field from being divided into multiple lines.
1161 # set ignore_list_reply_to=no
1163 # Name: ignore_list_reply_to
1168 # Affects the behaviour of the reply function when replying to
1169 # messages from mailing lists (as defined by the ``subscribe'' or
1170 # ``lists'' commands). When set, if the ``Reply-To:'' field is
1171 # set to the same value as the ``To:'' field, Mutt assumes that the
1172 # ``Reply-To:'' field was set by the mailing list to automate responses
1173 # to the list, and will ignore this field. To direct a response to the
1174 # mailing list when this option is set, use the list-reply
1175 # function; group-reply will reply to both the sender and the
1178 set ignore_list_reply_to=yes
1180 # set imap_authenticators=""
1182 # Name: imap_authenticators
1187 # This is a colon-delimited list of authentication methods mutt may
1188 # attempt to use to log in to an IMAP server, in the order mutt should
1189 # try them. Authentication methods are either 'login' or the right
1190 # side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi'
1191 # or 'cram-md5'. This parameter is case-insensitive. If this
1192 # parameter is unset (the default) mutt will try all available methods,
1193 # in order from most-secure to least-secure.
1195 # Example: set imap_authenticators="gssapi:cram-md5:login"
1197 # Note: Mutt will only fall back to other authentication methods if
1198 # the previous methods are unavailable. If a method is available but
1199 # authentication fails, mutt will not connect to the IMAP server.
1202 # set imap_check_subscribed=no
1204 # Name: imap_check_subscribed
1209 # When set, mutt will fetch the set of subscribed folders from
1210 # your server on connection, and add them to the set of mailboxes
1211 # it polls for new mail. See also the ``mailboxes'' command.
1214 # set imap_delim_chars="/."
1216 # Name: imap_delim_chars
1221 # This contains the list of characters which you would like to treat
1222 # as folder separators for displaying IMAP paths. In particular it
1223 # helps in using the '=' shortcut for your folder variable.
1226 # set imap_headers=""
1228 # Name: imap_headers
1233 # Mutt requests these header fields in addition to the default headers
1234 # ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE
1235 # CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP
1236 # servers before displaying the index menu. You may want to add more
1237 # headers for spam detection. Note: This is a space separated list.
1247 # When set, mutt will attempt to use the IMAP IDLE extension
1248 # to check for new mail in the current mailbox. Some servers
1249 # (dovecot was the inspiration for this option) react badly
1250 # to mutt's implementation. If your connection seems to freeze
1251 # up periodically, try unsetting this.
1254 # set imap_keepalive=900
1256 # Name: imap_keepalive
1261 # This variable specifies the maximum amount of time in seconds that mutt
1262 # will wait before polling open IMAP connections, to prevent the server
1263 # from closing them before mutt has finished with them. The default is
1264 # well within the RFC-specified minimum amount of time (30 minutes) before
1265 # a server is allowed to do this, but in practice the RFC does get
1266 # violated every now and then. Reduce this number if you find yourself
1267 # getting disconnected from your IMAP server due to inactivity.
1270 # set imap_list_subscribed=no
1272 # Name: imap_list_subscribed
1277 # This variable configures whether IMAP folder browsing will look for
1278 # only subscribed folders or all folders. This can be toggled in the
1279 # IMAP browser with the toggle-subscribed function.
1289 # Your login name on the IMAP server.
1291 # This variable defaults to the value of imap_user.
1301 # Specifies the password for your IMAP account. If unset, Mutt will
1302 # prompt you for your password when you invoke the fetch-mail function.
1303 # Warning: you should only use this option when you are on a
1304 # fairly secure machine, because the superuser can read your muttrc even
1305 # if you are the only one who can read the file.
1308 # set imap_passive=yes
1310 # Name: imap_passive
1315 # When set, mutt will not open new IMAP connections to check for new
1316 # mail. Mutt will only check for new mail over existing IMAP
1317 # connections. This is useful if you don't want to be prompted to
1318 # user/password pairs on mutt invocation, or if opening the connection
1329 # When set, mutt will avoid implicitly marking your mail as read whenever
1330 # you fetch a message from the server. This is generally a good thing,
1331 # but can make closing an IMAP folder somewhat slower. This option
1332 # exists to appease speed freaks.
1335 # set imap_servernoise=yes
1337 # Name: imap_servernoise
1342 # When set, mutt will display warning messages from the IMAP
1343 # server as error messages. Since these messages are often
1344 # harmless, or generated due to configuration problems on the
1345 # server which are out of the users' hands, you may wish to suppress
1346 # them at some point.
1356 # The name of the user whose mail you intend to access on the IMAP
1359 # This variable defaults to your user name on the local machine.
1362 # set implicit_autoview=no
1364 # Name: implicit_autoview
1369 # If set to ``yes'', mutt will look for a mailcap entry with the
1370 # copiousoutput flag set for every MIME attachment it doesn't have
1371 # an internal viewer defined for. If such an entry is found, mutt will
1372 # use the viewer defined in that entry to convert the body part to text
1375 set implicit_autoview=no
1377 # set include=ask-yes
1384 # Controls whether or not a copy of the message(s) you are replying to
1385 # is included in your reply.
1389 # set include_onlyfirst=no
1391 # Name: include_onlyfirst
1396 # Controls whether or not Mutt includes only the first attachment
1397 # of the message you are replying.
1400 # set indent_string="> "
1402 # Name: indent_string
1407 # Specifies the string to prepend to each line of text quoted in a
1408 # message to which you are replying. You are strongly encouraged not to
1409 # change this value, as it tends to agitate the more fanatical netizens.
1411 # This option is a format string, please see the description of
1412 # ``$index_format'' for supported printf()-style sequences.
1415 # set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
1417 # Name: index_format
1419 # Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
1422 # This variable allows you to customize the message index display to
1423 # your personal taste.
1425 # ``Format strings'' are similar to the strings used in the ``C''
1426 # function printf to format output (see the man page for more detail).
1427 # The following sequences are defined in Mutt:
1429 # %a address of the author
1430 # %A reply-to address (if present; otherwise: address of author)
1431 # %b filename of the original message folder (think mailBox)
1432 # %B the list to which the letter was sent, or else the folder name (%b).
1433 # %c number of characters (bytes) in the message
1434 # %C current message number
1435 # %d date and time of the message in the format specified by
1436 # ``date_format'' converted to sender's time zone
1437 # %D date and time of the message in the format specified by
1438 # ``date_format'' converted to the local time zone
1439 # %e current message number in thread
1440 # %E number of messages in current thread
1441 # %f sender (address + real name), either From: or Return-Path:
1442 # %F author name, or recipient name if the message is from you
1443 # %H spam attribute(s) of this message
1444 # %i message-id of the current message
1445 # %l number of lines in the message (does not work with maildir,
1446 # mh, and possibly IMAP folders)
1447 # %L If an address in the To or CC header field matches an address
1448 # defined by the users ``subscribe'' command, this displays
1449 # "To <list-name>", otherwise the same as %F.
1450 # %m total number of message in the mailbox
1451 # %M number of hidden messages if the thread is collapsed.
1453 # %n author's real name (or address if missing)
1454 # %O (_O_riginal save folder) Where mutt would formerly have
1455 # stashed the message: list name or recipient name if no list
1456 # %P progress indicator for the builtin pager (how much of the file has been displayed)
1457 # %s subject of the message
1458 # %S status of the message (N/D/d/!/r/*)
1459 # %t `to:' field (recipients)
1460 # %T the appropriate character from the $to_chars string
1461 # %u user (login) name of the author
1462 # %v first name of the author, or the recipient if the message is from you
1463 # %X number of attachments
1464 # (please see the ``attachments'' section for possible speed effects)
1465 # %y `x-label:' field, if present
1466 # %Y `x-label' field, if present, and (1) not at part of a thread tree,
1467 # (2) at the top of a thread, or (3) `x-label' is different from
1468 # preceding message's `x-label'.
1469 # %Z message status flags
1470 # %{fmt} the date and time of the message is converted to sender's
1471 # time zone, and ``fmt'' is expanded by the library function
1472 # ``strftime''; a leading bang disables locales
1473 # %[fmt] the date and time of the message is converted to the local
1474 # time zone, and ``fmt'' is expanded by the library function
1475 # ``strftime''; a leading bang disables locales
1476 # %(fmt) the local date and time when the message was received.
1477 # ``fmt'' is expanded by the library function ``strftime'';
1478 # a leading bang disables locales
1479 # %<fmt> the current local time. ``fmt'' is expanded by the library
1480 # function ``strftime''; a leading bang disables locales.
1481 # %>X right justify the rest of the string and pad with character "X"
1482 # %|X pad to the end of the line with character "X"
1483 # %*X soft-fill with character "X" as pad
1486 # `Soft-fill' deserves some explanation. Normal right-justification
1487 # will print everything to the left of the %>, displaying padding and
1488 # the whatever lies to the right only if there's room. By contrast,
1489 # soft-fill gives priority to the right-hand side, guaranteeing space
1490 # to display it and showing padding only if there's still room. If
1491 # necessary, soft-fill will eat text leftwards to make room for
1494 # Note that these expandos are supported in
1495 # ``save-hook'', ``fcc-hook'' and ``fcc-save-hook'', too.
1497 # See also: ``$to_chars''.
1499 #set index_format="%4C %Z %{%b %d} %-15.15F %4c %?H?[%H] ?%s" ## DEFINED BY A DEFAULT HOOK
1501 # set ispell="ispell"
1508 # How to invoke ispell (GNU's spell-checking software).
1511 # set keep_flagged=no
1513 # Name: keep_flagged
1518 # If set, read messages marked as flagged will not be moved
1519 # from your spool mailbox to your ``$mbox'' mailbox, or as a result of
1520 # a ``mbox-hook'' command.
1530 # The locale used by strftime(3) to format dates. Legal values are
1531 # the strings your system accepts for the locale variable LC_TIME.
1541 # This variable configures how often (in seconds) mutt should look for
1542 # new mail. Also see the ``$timeout'' variable.
1545 # set mailcap_path=""
1547 # Name: mailcap_path
1552 # This variable specifies which files to consult when attempting to
1553 # display MIME bodies not directly supported by Mutt.
1555 set mailcap_path="$my_confdir/mailcap.icalendar:$my_confdir/mailcap.backgrounding:$my_confdir/mailcap.htmldump"
1557 # set mailcap_sanitize=yes
1559 # Name: mailcap_sanitize
1564 # If set, mutt will restrict possible characters in mailcap % expandos
1565 # to a well-defined set of safe characters. This is the safe setting,
1566 # but we are not sure it doesn't break some more advanced MIME stuff.
1568 # DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
1572 # set header_cache=""
1574 # Name: header_cache
1579 # The header_cache variable points to the header cache database.
1580 # If header_cache points to a directory it will contain a header cache
1581 # database per folder. If header_cache points to a file that file will
1582 # be a single global header cache. By default it is unset so no header
1583 # caching will be used.
1585 set header_cache="~/.var/mutt/header_cache"
1587 # set header_cache_compress=yes
1589 # Name: header_cache_compress
1593 # When mutt is compiled with qdbm or tokyocabinet as header cache backend,
1594 # this option determines whether the database will be compressed. Compression
1595 # results in database files roughly being one fifth of the usual diskspace,
1596 # but the uncompression can result in a slower opening of cached folder(s)
1597 # which in general is still much faster than opening non header cached
1600 set header_cache_compress=no
1602 # set maildir_header_cache_verify=yes
1604 # Name: maildir_header_cache_verify
1609 # Check for Maildir unaware programs other than mutt having modified maildir
1610 # files when the header cache is in use. This incurs one stat(2) per
1611 # message every time the folder is opened.
1613 set maildir_header_cache_verify=no
1615 # set maildir_trash=no
1617 # Name: maildir_trash
1622 # If set, messages marked as deleted will be saved with the maildir
1623 # (T)rashed flag instead of unlinked. NOTE: this only applies
1624 # to maildir-style mailboxes. Setting it will have no effect on other
1635 # Controls whether or not mutt marks new unread
1636 # messages as old if you exit a mailbox without reading them.
1637 # With this option set, the next time you start mutt, the messages
1638 # will show up with an "O" next to them in the index menu,
1639 # indicating that they are old.
1650 # Controls the display of wrapped lines in the internal pager. If set, a
1651 # ``+'' marker is displayed at the beginning of wrapped lines. Also see
1652 # the ``$smart_wrap'' variable.
1656 # set mask="!^\\.[^.]"
1659 # Type: regular expression
1660 # Default: "!^\\.[^.]"
1663 # A regular expression used in the file browser, optionally preceded by
1664 # the not operator ``!''. Only files whose names match this mask
1665 # will be shown. The match is always case-sensitive.
1675 # This specifies the folder into which read mail in your ``$spoolfile''
1676 # folder will be appended.
1679 # set mbox_type=mbox
1682 # Type: folder magic
1686 # The default mailbox type used when creating new folders. May be any of
1687 # mbox, MMDF, MH and Maildir.
1689 set mbox_type=Maildir
1698 # If unset, Mutt will remove your address (see the ``alternates''
1699 # command) from the list of recipients when replying to a message.
1702 # set menu_context=0
1704 # Name: menu_context
1710 # This variable controls the number of lines of context that are given
1711 # when scrolling through menus. (Similar to ``$pager_context''.)
1714 # set menu_move_off=yes
1716 # Name: menu_move_off
1721 # When unset, the bottom entry of menus will never scroll up past
1722 # the bottom of the screen, unless there are less entries than lines.
1723 # When set, the bottom entry may move off the bottom.
1726 # set menu_scroll=no
1734 # When set, menus will be scrolled up or down one line when you
1735 # attempt to move across a screen boundary. If unset, the screen
1736 # is cleared and the next or previous page of the menu is displayed
1737 # (useful for slow links to avoid many redraws).
1747 # If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
1748 # set as if the user had pressed the ESC key and whatever key remains
1749 # after having the high bit removed. For example, if the key pressed
1750 # has an ASCII value of 0xf8, then this is treated as if the user had
1751 # pressed ESC then ``x''. This is because the result of removing the
1752 # high bit from ``0xf8'' is ``0x78'', which is the ASCII character
1763 # When unset, mutt will mimic mh's behaviour and rename deleted messages
1764 # to ,<old file name> in mh folders instead of really deleting
1765 # them. If the variable is set, the message files will simply be
1769 # set mh_seq_flagged="flagged"
1771 # Name: mh_seq_flagged
1773 # Default: "flagged"
1776 # The name of the MH sequence used for flagged messages.
1779 # set mh_seq_replied="replied"
1781 # Name: mh_seq_replied
1783 # Default: "replied"
1786 # The name of the MH sequence used to tag replied messages.
1789 # set mh_seq_unseen="unseen"
1791 # Name: mh_seq_unseen
1796 # The name of the MH sequence used for unseen messages.
1799 # set mime_forward=no
1801 # Name: mime_forward
1806 # When set, the message you are forwarding will be attached as a
1807 # separate MIME part instead of included in the main body of the
1808 # message. This is useful for forwarding MIME messages so the receiver
1809 # can properly view the message as it was delivered to you. If you like
1810 # to switch between MIME and not MIME from mail to mail, set this
1811 # variable to ask-no or ask-yes.
1813 # Also see ``$forward_decode'' and ``$mime_forward_decode''.
1815 set mime_forward=ask-yes
1817 # set mime_forward_decode=no
1819 # Name: mime_forward_decode
1824 # Controls the decoding of complex MIME messages into text/plain when
1825 # forwarding a message while ``$mime_forward'' is set. Otherwise
1826 # ``$forward_decode'' is used instead.
1829 # set mime_forward_rest=yes
1831 # Name: mime_forward_rest
1836 # When forwarding multiple attachments of a MIME message from the recvattach
1837 # menu, attachments which cannot be decoded in a reasonable manner will
1838 # be attached to the newly composed message if this option is set.
1841 # set pgp_mime_signature_filename="signature.asc"
1843 # Name: pgp_mime_signature_filename
1845 # Default: "signature.asc"
1848 # This option sets the filename used for signature parts in PGP/MIME
1851 #set pgp_mime_signature_filename="digital_signature_gpg.asc"
1853 # set pgp_mime_signature_description="Digital signature"
1855 # Name: pgp_mime_signature_description
1857 # Default: "Digital signature"
1859 #set pgp_mime_signature_description="Digital signature (see http://martin-krafft.net/gpg/sig-policy/999bbcc4/current)"
1861 # This option sets the Content-Description used for signature parts in
1862 # PGP/MIME signed messages.
1865 # set mix_entry_format="%4n %c %-16s %a"
1867 # Name: mix_entry_format
1869 # Default: "%4n %c %-16s %a"
1872 # This variable describes the format of a remailer line on the mixmaster
1873 # chain selection screen. The following printf-like sequences are
1876 # %n The running number on the menu.
1877 # %c Remailer capabilities.
1878 # %s The remailer's short name.
1879 # %a The remailer's e-mail address.
1882 # set mixmaster="mixmaster"
1886 # Default: "mixmaster"
1889 # This variable contains the path to the Mixmaster binary on your
1890 # system. It is used with various sets of parameters to gather the
1891 # list of known remailers, and to finally send a message through the
1894 # Note: On Debian systems, this option is set by default to
1895 # ``mixmaster-filter'' in /etc/Muttrc.
1905 # Controls whether or not Mutt will move read messages
1906 # from your spool mailbox to your ``$mbox'' mailbox, or as a result of
1907 # a ``mbox-hook'' command.
1911 # set message_cachedir=""
1913 # Name: message_cachedir
1918 # Set this to a directory and mutt will cache copies of messages from
1919 # your IMAP and POP servers here. You are free to remove entries at any
1920 # time, for instance if stale entries accumulate because you have
1921 # deleted messages with another mail client.
1924 # set message_cache_clean=no
1926 # Name: message_cache_clean
1931 # If set, mutt will clean out obsolete entries from the cache when
1932 # the mailbox is synchronized. You probably only want to set it
1933 # every once in a while, since it can be a little slow.
1936 # set message_format="%s"
1938 # Name: message_format
1943 # This is the string displayed in the ``attachment'' menu for
1944 # attachments of type message/rfc822. For a full listing of defined
1945 # printf()-like sequences see the section on ``$index_format''.
1948 # set narrow_tree=no
1955 # This variable, when set, makes the thread tree narrower, allowing
1956 # deeper threads to fit on the screen.
1967 # Operations that expect to transfer a large amount of data over the
1968 # network will update their progress every net_inc kilobytes.
1969 # If set to 0, no progress messages will be displayed.
1971 # See also ``$read_inc'' and ``$write_inc''.
1974 # set pager="builtin"
1978 # Default: "builtin"
1981 # This variable specifies which pager you would like to use to view
1982 # messages. builtin means to use the builtin pager, otherwise this
1983 # variable should specify the pathname of the external pager you would
1986 # Using an external pager may have some disadvantages: Additional
1987 # keystrokes are necessary because you can't call mutt functions
1988 # directly from the pager, and screen resizes cause lines longer than
1989 # the screen width to be badly formatted in the help menu.
1992 # set pager_context=0
1994 # Name: pager_context
1999 # This variable controls the number of lines of context that are given
2000 # when displaying the next or previous page in the internal pager. By
2001 # default, Mutt will display the line after the last one on the screen
2002 # at the top of the next page (0 lines of context).
2006 # set pager_format="-%Z- %C/%m: %-20.20n %s%* -- (%P)"
2008 # Name: pager_format
2010 # Default: "-%Z- %C/%m: %-20.20n %s%* -- (%P)"
2013 # This variable controls the format of the one-line message ``status''
2014 # displayed before each message in either the internal or an external
2015 # pager. The valid sequences are listed in the ``$index_format''
2018 set pager_format="<%a> %* %i (%P)"
2020 # set pager_index_lines=0
2022 # Name: pager_index_lines
2026 # ## SET BY A DEFAULT HOOK
2028 # Determines the number of lines of a mini-index which is shown when in
2029 # the pager. The current message, unless near the top or bottom of the
2030 # folder, will be roughly one third of the way down this mini-index,
2031 # giving the reader the context of a few messages before and after the
2032 # message. This is useful, for example, to determine how many messages
2033 # remain to be read in the current thread. One of the lines is reserved
2034 # for the status bar from the index, so a pager_index_lines of 6
2035 # will only show 5 lines of the actual index. A value of 0 results in
2036 # no index being shown. If the number of messages in the current folder
2037 # is less than pager_index_lines, then the index will only use as
2038 # many lines as it needs.
2040 set pager_index_lines=5
2049 # When set, the internal-pager will not move to the next message
2050 # when you are at the end of a message and invoke the next-page
2055 # set crypt_autosign=no
2057 # Name: crypt_autosign
2062 # Setting this variable will cause Mutt to always attempt to
2063 # cryptographically sign outgoing messages. This can be overridden
2064 # by use of the pgp-menu, when signing is not required or
2065 # encryption is requested as well. If ``$smime_is_default'' is set,
2066 # then OpenSSL is used instead to create S/MIME messages and settings can
2067 # be overridden by use of the smime-menu.
2070 set crypt_autosign=yes
2072 # set crypt_autoencrypt=no
2074 # Name: crypt_autoencrypt
2079 # Setting this variable will cause Mutt to always attempt to PGP
2080 # encrypt outgoing messages. This is probably only useful in
2081 # connection to the send-hook command. It can be overridden
2082 # by use of the pgp-menu, when encryption is not required or
2083 # signing is requested as well. IF ``$smime_is_default'' is set,
2084 # then OpenSSL is used instead to create S/MIME messages and
2085 # settings can be overridden by use of the smime-menu.
2089 # set pgp_ignore_subkeys=yes
2091 # Name: pgp_ignore_subkeys
2096 # Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
2097 # the principal key will inherit the subkeys' capabilities. Unset this
2098 # if you want to play interesting key selection games.
2102 # set crypt_replyencrypt=yes
2104 # Name: crypt_replyencrypt
2109 # If set, automatically PGP or OpenSSL encrypt replies to messages which are
2114 # set crypt_replysign=no
2116 # Name: crypt_replysign
2121 # If set, automatically PGP or OpenSSL sign replies to messages which are
2124 # Note: this does not work on messages that are encrypted
2128 set crypt_replysign=yes
2130 # set crypt_replysignencrypted=no
2132 # Name: crypt_replysignencrypted
2137 # If set, automatically PGP or OpenSSL sign replies to messages
2138 # which are encrypted. This makes sense in combination with
2139 # ``$crypt_replyencrypt'', because it allows you to sign all
2140 # messages which are automatically encrypted. This works around
2141 # the problem noted in ``$crypt_replysign'', that mutt is not able
2142 # to find out whether an encrypted message is also signed.
2145 set crypt_replysignencrypted=yes
2147 # set crypt_timestamp=yes
2149 # Name: crypt_timestamp
2154 # If set, mutt will include a time stamp in the lines surrounding
2155 # PGP or S/MIME output, so spoofing such lines is more difficult.
2156 # If you are using colors to mark these lines, and rely on these,
2157 # you may unset this setting.
2161 # set pgp_use_gpg_agent=no
2163 # Name: pgp_use_gpg_agent
2168 # If set, mutt will use a possibly-running gpg-agent process.
2171 set pgp_use_gpg_agent=yes
2173 # set crypt_verify_sig=yes
2175 # Name: crypt_verify_sig
2180 # If ``yes'', always attempt to verify PGP or S/MIME signatures.
2181 # If ``ask'', ask whether or not to verify the signature.
2182 # If ``no'', never attempt to verify cryptographic signatures.
2186 # set smime_is_default=no
2188 # Name: smime_is_default
2193 # The default behaviour of mutt is to use PGP on all auto-sign/encryption
2194 # operations. To override and to use OpenSSL instead this must be set.
2195 # However, this has no effect while replying, since mutt will automatically
2196 # select the same application that was used to sign/encrypt the original
2197 # message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
2201 # set smime_ask_cert_label=yes
2203 # Name: smime_ask_cert_label
2208 # This flag controls whether you want to be asked to enter a label
2209 # for a certificate about to be added to the database or not. It is
2214 # set smime_decrypt_use_default_key=yes
2216 # Name: smime_decrypt_use_default_key
2221 # If set (default) this tells mutt to use the default key for decryption. Otherwise,
2222 # if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address
2223 # to determine the key to use. It will ask you to supply a key, if it can't find one.
2227 # set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
2229 # Name: pgp_entry_format
2231 # Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
2234 # This variable allows you to customize the PGP key selection menu to
2235 # your personal taste. This string is similar to ``$index_format'', but
2236 # has its own set of printf()-like sequences:
2245 # %t trust/validity of the key-uid association
2246 # %[<s>] date of the key where <s> is an strftime(3) expression
2252 # set pgp_good_sign=""
2254 # Name: pgp_good_sign
2255 # Type: regular expression
2259 # If you assign a text to this variable, then a PGP signature is only
2260 # considered verified if the output from $pgp_verify_command contains
2261 # the text. Use this variable if the exit code from the command is 0
2262 # even for bad signatures.
2266 # set pgp_check_exit=yes
2268 # Name: pgp_check_exit
2273 # If set, mutt will check the exit code of the PGP subprocess when
2274 # signing or encrypting. A non-zero exit code means that the
2275 # subprocess failed.
2279 # set pgp_long_ids=no
2281 # Name: pgp_long_ids
2286 # If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs.
2290 # set pgp_retainable_sigs=no
2292 # Name: pgp_retainable_sigs
2297 # If set, signed and encrypted messages will consist of nested
2298 # multipart/signed and multipart/encrypted body parts.
2300 # This is useful for applications like encrypted and signed mailing
2301 # lists, where the outer layer (multipart/encrypted) can be easily
2302 # removed, while the inner multipart/signed part is retained.
2305 set pgp_retainable_sigs=yes
2307 # set pgp_autoinline=no
2309 # Name: pgp_autoinline
2314 # This option controls whether Mutt generates old-style inline
2315 # (traditional) PGP encrypted or signed messages under certain
2316 # circumstances. This can be overridden by use of the pgp-menu,
2317 # when inline is not required.
2319 # Note that Mutt might automatically use PGP/MIME for messages
2320 # which consist of more than a single MIME part. Mutt can be
2321 # configured to ask before sending PGP/MIME messages when inline
2322 # (traditional) would not work.
2323 # See also: ``$pgp_mime_auto''.
2325 # Also note that using the old-style PGP message format is strongly
2330 # set pgp_replyinline=no
2332 # Name: pgp_replyinline
2337 # Setting this variable will cause Mutt to always attempt to
2338 # create an inline (traditional) message when replying to a
2339 # message which is PGP encrypted/signed inline. This can be
2340 # overridden by use of the pgp-menu, when inline is not
2341 # required. This option does not automatically detect if the
2342 # (replied-to) message is inline; instead it relies on Mutt
2343 # internals for previously checked/flagged messages.
2345 # Note that Mutt might automatically use PGP/MIME for messages
2346 # which consist of more than a single MIME part. Mutt can be
2347 # configured to ask before sending PGP/MIME messages when inline
2348 # (traditional) would not work.
2349 # See also: ``$pgp_mime_auto''.
2351 # Also note that using the old-style PGP message format is strongly
2356 # set pgp_show_unusable=yes
2358 # Name: pgp_show_unusable
2363 # If set, mutt will display non-usable keys on the PGP key selection
2364 # menu. This includes keys which have been revoked, have expired, or
2365 # have been marked as ``disabled'' by the user.
2368 set pgp_show_unusable=no
2370 # set pgp_sign_as=""
2377 # If you have more than one key pair, this option allows you to specify
2378 # which of your private keys to use. It is recommended that you use the
2379 # keyid form to specify your key (e.g., ``0x00112233'').
2382 set pgp_sign_as="0x9C9D6979AE941637"
2384 # set pgp_strict_enc=yes
2386 # Name: pgp_strict_enc
2391 # If set, Mutt will automatically encode PGP/MIME signed messages as
2392 # quoted-printable. Please note that unsetting this variable may
2393 # lead to problems with non-verifyable PGP signatures, so only change
2394 # this if you know what you are doing.
2398 # set pgp_timeout=300
2405 # The number of seconds after which a cached passphrase will expire if
2410 # set pgp_sort_keys=address
2412 # Name: pgp_sort_keys
2417 # Specifies how the entries in the `pgp keys' menu are sorted. The
2418 # following are legal values:
2420 # address sort alphabetically by user id
2421 # keyid sort alphabetically by key id
2422 # date sort by key creation date
2423 # trust sort by the trust of the key
2426 # If you prefer reverse order of the above values, prefix it with
2431 # set pgp_mime_auto=ask-yes
2433 # Name: pgp_mime_auto
2438 # This option controls whether Mutt will prompt you for
2439 # automatically sending a (signed/encrypted) message using
2440 # PGP/MIME when inline (traditional) fails (for any reason).
2442 # Also note that using the old-style PGP message format is strongly
2447 # set pgp_auto_decode=no
2449 # Name: pgp_auto_decode
2454 # If set, mutt will automatically attempt to decrypt traditional PGP
2455 # messages whenever the user performs an operation which ordinarily would
2456 # result in the contents of the message being operated on. For example,
2457 # if the user displays a pgp-traditional message which has not been manually
2458 # checked with the check-traditional-pgp function, mutt will automatically
2459 # check the message for traditional pgp.
2461 set pgp_auto_decode=yes
2463 # set pgp_decode_command=""
2465 # Name: pgp_decode_command
2470 # This format strings specifies a command which is used to decode
2471 # application/pgp attachments.
2473 # The PGP command formats have their own set of printf-like sequences:
2475 # %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
2476 # string otherwise. Note: This may be used with a %? construct.
2477 # %f Expands to the name of a file containing a message.
2478 # %s Expands to the name of a file containing the signature part
2479 # of a multipart/signed attachment when verifying it.
2480 # %a The value of $pgp_sign_as.
2481 # %r One or more key IDs.
2484 # For examples on how to configure these formats for the various versions
2485 # of PGP which are floating around, see the pgp*.rc and gpg.rc files in
2486 # the samples/ subdirectory which has been installed on your system
2487 # alongside the documentation.
2491 # set pgp_getkeys_command=""
2493 # Name: pgp_getkeys_command
2498 # This command is invoked whenever mutt will need public key information.
2499 # %r is the only printf-like sequence used with this format.
2503 # set pgp_verify_command=""
2505 # Name: pgp_verify_command
2510 # This command is used to verify PGP signatures.
2514 # set pgp_decrypt_command=""
2516 # Name: pgp_decrypt_command
2521 # This command is used to decrypt a PGP encrypted message.
2525 # set pgp_clearsign_command=""
2527 # Name: pgp_clearsign_command
2532 # This format is used to create a old-style "clearsigned" PGP
2533 # message. Note that the use of this format is strongly
2538 # set pgp_sign_command=""
2540 # Name: pgp_sign_command
2545 # This command is used to create the detached PGP signature for a
2546 # multipart/signed PGP/MIME body part.
2550 # set pgp_encrypt_sign_command=""
2552 # Name: pgp_encrypt_sign_command
2557 # This command is used to both sign and encrypt a body part.
2561 # set pgp_encrypt_only_command=""
2563 # Name: pgp_encrypt_only_command
2568 # This command is used to encrypt a body part without signing it.
2572 # set pgp_import_command=""
2574 # Name: pgp_import_command
2579 # This command is used to import a key from a message into
2580 # the user's public key ring.
2584 # set pgp_export_command=""
2586 # Name: pgp_export_command
2591 # This command is used to export a public key from the user's
2596 # set pgp_verify_key_command=""
2598 # Name: pgp_verify_key_command
2603 # This command is used to verify key information from the key selection
2608 # set pgp_list_secring_command=""
2610 # Name: pgp_list_secring_command
2615 # This command is used to list the secret key ring's contents. The
2616 # output format must be analogous to the one used by
2617 # gpg --list-keys --with-colons.
2619 # This format is also generated by the pgpring utility which comes
2624 # set pgp_list_pubring_command=""
2626 # Name: pgp_list_pubring_command
2631 # This command is used to list the public key ring's contents. The
2632 # output format must be analogous to the one used by
2633 # gpg --list-keys --with-colons.
2635 # This format is also generated by the pgpring utility which comes
2640 # set forward_decrypt=yes
2642 # Name: forward_decrypt
2647 # Controls the handling of encrypted messages when forwarding a message.
2648 # When set, the outer layer of encryption is stripped off. This
2649 # variable is only used if ``$mime_forward'' is set and
2650 # ``$mime_forward_decode'' is unset.
2654 # set smime_timeout=300
2656 # Name: smime_timeout
2661 # The number of seconds after which a cached passphrase will expire if
2666 # set smime_encrypt_with=""
2668 # Name: smime_encrypt_with
2673 # This sets the algorithm that should be used for encryption.
2674 # Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128".
2675 # If unset "3des" (TripleDES) is used.
2686 # Since there is no pubring/secring as with PGP, mutt has to handle
2687 # storage ad retrieval of keys/certs by itself. This is very basic right now,
2688 # and stores keys and certificates in two different directories, both
2689 # named as the hash-value retrieved from OpenSSL. There is an index file
2690 # which contains mailbox-address keyid pair, and which can be manually
2691 # edited. This one points to the location of the private keys.
2694 set smime_keys="~/.smime/keys"
2696 # set smime_ca_location=""
2698 # Name: smime_ca_location
2703 # This variable contains the name of either a directory, or a file which
2704 # contains trusted certificates for use with OpenSSL.
2707 # Note: On Debian systems, this defaults to the first existing file in
2708 # the following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt
2709 # /etc/ssl/certs/ca-certificates.crt.
2712 # set smime_certificates=""
2714 # Name: smime_certificates
2719 # Since there is no pubring/secring as with PGP, mutt has to handle
2720 # storage and retrieval of keys by itself. This is very basic right
2721 # now, and keys and certificates are stored in two different
2722 # directories, both named as the hash-value retrieved from
2723 # OpenSSL. There is an index file which contains mailbox-address
2724 # keyid pairs, and which can be manually edited. This one points to
2725 # the location of the certificates.
2728 set smime_certificates="~/.smime/certificates"
2730 # set smime_decrypt_command=""
2732 # Name: smime_decrypt_command
2737 # This format string specifies a command which is used to decrypt
2738 # application/x-pkcs7-mime attachments.
2740 # The OpenSSL command formats have their own set of printf-like sequences
2743 # %f Expands to the name of a file containing a message.
2744 # %s Expands to the name of a file containing the signature part
2745 # of a multipart/signed attachment when verifying it.
2746 # %k The key-pair specified with $smime_default_key
2747 # %c One or more certificate IDs.
2748 # %a The algorithm used for encryption.
2749 # %C CA location: Depending on whether $smime_ca_location
2750 # points to a directory or file, this expands to
2751 # "-CApath $smime_ca_location" or "-CAfile $smime_ca_location".
2754 # For examples on how to configure these formats, see the smime.rc in
2755 # the samples/ subdirectory which has been installed on your system
2756 # alongside the documentation.
2760 # set smime_verify_command=""
2762 # Name: smime_verify_command
2767 # This command is used to verify S/MIME signatures of type multipart/signed.
2771 # set smime_verify_opaque_command=""
2773 # Name: smime_verify_opaque_command
2778 # This command is used to verify S/MIME signatures of type
2779 # application/x-pkcs7-mime.
2783 # set smime_sign_command=""
2785 # Name: smime_sign_command
2790 # This command is used to created S/MIME signatures of type
2791 # multipart/signed, which can be read by all mail clients.
2795 # set smime_sign_opaque_command=""
2797 # Name: smime_sign_opaque_command
2802 # This command is used to created S/MIME signatures of type
2803 # application/x-pkcs7-signature, which can only be handled by mail
2804 # clients supporting the S/MIME extension.
2808 # set smime_encrypt_command=""
2810 # Name: smime_encrypt_command
2815 # This command is used to create encrypted S/MIME messages.
2819 # set smime_pk7out_command=""
2821 # Name: smime_pk7out_command
2826 # This command is used to extract PKCS7 structures of S/MIME signatures,
2827 # in order to extract the public X509 certificate(s).
2831 # set smime_get_cert_command=""
2833 # Name: smime_get_cert_command
2838 # This command is used to extract X509 certificates from a PKCS7 structure.
2842 # set smime_get_signer_cert_command=""
2844 # Name: smime_get_signer_cert_command
2849 # This command is used to extract only the signers X509 certificate from a S/MIME
2850 # signature, so that the certificate's owner may get compared to the
2851 # email's 'From'-field.
2855 # set smime_import_cert_command=""
2857 # Name: smime_import_cert_command
2862 # This command is used to import a certificate via smime_keys.
2866 # set smime_get_cert_email_command=""
2868 # Name: smime_get_cert_email_command
2873 # This command is used to extract the mail address(es) used for storing
2874 # X509 certificates, and for verification purposes (to check whether the
2875 # certificate was issued for the sender's mailbox).
2879 # set smime_default_key=""
2881 # Name: smime_default_key
2886 # This is the default key-pair to use for signing. This must be set to the
2887 # keyid (the hash-value that OpenSSL generates) to work properly
2890 set smime_default_key="a350124a.0"
2892 # set ssl_force_tls=no
2894 # Name: ssl_force_tls
2899 # If this variable is set, Mutt will require that all connections
2900 # to remote servers be encrypted. Furthermore it will attempt to
2901 # negotiate TLS even if the server does not advertise the capability,
2902 # since it would otherwise have to abort the connection anyway. This
2903 # option supersedes ``$ssl_starttls''.
2906 # set ssl_starttls=yes
2908 # Name: ssl_starttls
2913 # If set (the default), mutt will attempt to use STARTTLS on servers
2914 # advertising the capability. When unset, mutt will not attempt to
2915 # use STARTTLS regardless of the server's capabilities.
2918 # set certificate_file="~/.mutt_certificates"
2920 # Name: certificate_file
2922 # Default: "~/.mutt_certificates"
2925 # This variable specifies the file where the certificates you trust
2926 # are saved. When an unknown certificate is encountered, you are asked
2927 # if you accept it or not. If you accept it, the certificate can also
2928 # be saved in this file and further connections are automatically
2931 # You can also manually add CA certificates in this file. Any server
2932 # certificate that is signed with one of these CA certificates are
2933 # also automatically accepted.
2935 # Example: set certificate_file=~/.mutt/certificates
2938 # set ssl_use_sslv3=yes
2940 # Name: ssl_use_sslv3
2945 # This variables specifies whether to attempt to use SSLv3 in the
2946 # SSL authentication process.
2949 # set ssl_use_tlsv1=yes
2951 # Name: ssl_use_tlsv1
2956 # This variables specifies whether to attempt to use TLSv1 in the
2957 # SSL authentication process.
2960 # set ssl_min_dh_prime_bits=0
2962 # Name: ssl_min_dh_prime_bits
2967 # This variable specifies the minimum acceptable prime size (in bits)
2968 # for use in any Diffie-Hellman key exchange. A value of 0 will use
2969 # the default from the GNUTLS library.
2972 # set ssl_ca_certificates_file=""
2974 # Name: ssl_ca_certificates_file
2979 # This variable specifies a file containing trusted CA certificates.
2980 # Any server certificate that is signed with one of these CA
2981 # certificates are also automatically accepted.
2983 # Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
2985 # Note: On Debian systems, this variable defaults to the example
2986 # mentioned. This file is managed by the ``ca-certificates'' package.
2996 # Used in connection with the pipe-message command and the ``tag-
2997 # prefix'' operator. If this variable is unset, when piping a list of
2998 # tagged messages Mutt will concatenate the messages and will pipe them
2999 # as a single folder. When set, Mutt will pipe the messages one by one.
3000 # In both cases the messages are piped in the current sorted order,
3001 # and the ``$pipe_sep'' separator is added after each message.
3004 # set pipe_decode=no
3011 # Used in connection with the pipe-message command. When unset,
3012 # Mutt will pipe the messages without any preprocessing. When set, Mutt
3013 # will weed headers and will attempt to PGP/MIME decode the messages
3025 # The separator to add between messages when piping a list of tagged
3026 # messages to an external Unix command.
3029 # set pop_authenticators=""
3031 # Name: pop_authenticators
3036 # This is a colon-delimited list of authentication methods mutt may
3037 # attempt to use to log in to an POP server, in the order mutt should
3038 # try them. Authentication methods are either 'user', 'apop' or any
3039 # SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'.
3040 # This parameter is case-insensitive. If this parameter is unset
3041 # (the default) mutt will try all available methods, in order from
3042 # most-secure to least-secure.
3044 # Example: set pop_authenticators="digest-md5:apop:user"
3047 # set pop_auth_try_all=yes
3049 # Name: pop_auth_try_all
3054 # If set, Mutt will try all available methods. When unset, Mutt will
3055 # only fall back to other authentication methods if the previous
3056 # methods are unavailable. If a method is available but authentication
3057 # fails, Mutt will not connect to the POP server.
3060 # set pop_checkinterval=60
3062 # Name: pop_checkinterval
3067 # This variable configures how often (in seconds) mutt should look for
3068 # new mail in the currently selected mailbox if it is a POP mailbox.
3071 # set pop_delete=ask-no
3078 # If set, Mutt will delete successfully downloaded messages from the POP
3079 # server when using the fetch-mail function. When unset, Mutt will
3080 # download messages but also leave them on the POP server.
3090 # The name of your POP server for the fetch-mail function. You
3091 # can also specify an alternative port, username and password, ie:
3093 # [pop[s]://][username[:password]@]popserver[:port]
3103 # If this variable is set, mutt will try to use the "LAST" POP command
3104 # for retrieving only unread messages from the POP server when using
3105 # the fetch-mail function.
3108 # set pop_reconnect=ask-yes
3110 # Name: pop_reconnect
3115 # Controls whether or not Mutt will try to reconnect to POP server if
3116 # the connection is lost.
3126 # Your login name on the POP server.
3128 # This variable defaults to your user name on the local machine.
3138 # Specifies the password for your POP account. If unset, Mutt will
3139 # prompt you for your password when you open POP mailbox.
3140 # Warning: you should only use this option when you are on a
3141 # fairly secure machine, because the superuser can read your muttrc
3142 # even if you are the only one who can read the file.
3145 # set post_indent_string=""
3147 # Name: post_indent_string
3152 # Similar to the ``$attribution'' variable, Mutt will append this
3153 # string after the inclusion of a message which is being replied to.
3156 # set postpone=ask-yes
3163 # Controls whether or not messages are saved in the ``$postponed''
3164 # mailbox when you elect not to send immediately. Also see the
3165 # ``$recall'' variable.
3168 # set postponed="~/postponed"
3172 # Default: "~/postponed"
3175 # Mutt allows you to indefinitely ``postpone sending a message'' which
3176 # you are editing. When you choose to postpone a message, Mutt saves it
3177 # in the mailbox specified by this variable. Also see the ``$postpone''
3180 set postponed="=drafts"
3189 # If set, a shell command to be executed if mutt fails to establish
3190 # a connection to the server. This is useful for setting up secure
3191 # connections, e.g. with ssh(1). If the command returns a nonzero
3192 # status, mutt gives up opening the server. Example:
3194 # preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net
3195 # sleep 20 < /dev/null > /dev/null"
3197 # Mailbox 'foo' on mailhost.net can now be reached
3198 # as '{localhost:1234}foo'.
3200 # NOTE: For this example to work, you must be able to log in to the
3201 # remote machine without having to enter a password.
3211 # Controls whether or not Mutt really prints messages.
3212 # This is set to ask-no by default, because some people
3213 # accidentally hit ``p'' often (like me).
3216 # set print_command="lpr"
3218 # Name: print_command
3223 # This specifies the command pipe that should be used to print messages.
3225 #set print_command="iconv -s -tlatin1//TRANSLIT | a2ps -=mail -Xlatin1 --title='%D{%Y.%m.%d.%H%M%S}-\$t2-\$t1' -B --borders=no --header='\$t2: \$t1' --left-footer='#?l!%E!#?v|%E|%s./%s#|!' --right-footer='#?l!%s./%s#!#?v|%s./%s#|%E|!' -cl100 -1qP cupspdf"
3226 set print_command="muttprint"
3229 # set print_decode=yes
3231 # Name: print_decode
3236 # Used in connection with the print-message command. If this
3237 # option is set, the message is decoded before it is passed to the
3238 # external command specified by $print_command. If this option
3239 # is unset, no processing will be applied to the message when
3240 # printing it. The latter setting may be useful if you are using
3241 # some advanced printer filter which is able to properly format
3242 # e-mail messages for printing.
3245 # set print_split=no
3252 # Used in connection with the print-message command. If this option
3253 # is set, the command specified by $print_command is executed once for
3254 # each message which is to be printed. If this option is unset,
3255 # the command specified by $print_command is executed only once, and
3256 # all the messages are concatenated, with a form feed as the message
3259 # Those who use the enscript(1) program's mail-printing mode will
3260 # most likely want to set this option.
3264 # set prompt_after=yes
3266 # Name: prompt_after
3271 # If you use an external ``$pager'', setting this variable will
3272 # cause Mutt to prompt you for a command when the pager exits rather
3273 # than returning to the index menu. If unset, Mutt will return to the
3274 # index menu when the external pager exits.
3277 # set query_command=""
3279 # Name: query_command
3284 # This specifies the command that mutt will use to make external address
3285 # queries. The string should contain a %s, which will be substituted
3286 # with the query string the user types. See ``query'' for more
3289 set query_command="lbdbq"
3291 # set query_format="%4c %t %-25.25a %-25.25n %?e?(%e)?"
3293 # Name: query_format
3295 # Default: "%4c %t %-25.25a %-25.25n %?e?(%e)?"
3298 # This variable describes the format of the `query' menu. The
3299 # following printf-style sequences are understood:
3301 # %a destination address
3302 # %c current entry number
3303 # %e extra information *
3304 # %n destination name
3305 # %t ``*'' if current entry is tagged, a space otherwise
3306 # %>X right justify the rest of the string and pad with "X"
3307 # %|X pad to the end of the line with "X"
3308 # %*X soft-fill with character "X" as pad
3311 # For an explanation of `soft-fill', see the ``$index_format'' documentation.
3313 # * = can be optionally printed if nonzero, see the ``$status_format'' documentation.
3323 # This variable controls whether ``quit'' and ``exit'' actually quit
3324 # from mutt. If it set to yes, they do quit, if it is set to no, they
3325 # have no effect, and if it is set to ask-yes or ask-no, you are
3326 # prompted for confirmation when you try to quit.
3329 # set quote_regexp="^([ \t]*[|>:}#])+"
3331 # Name: quote_regexp
3332 # Type: regular expression
3333 # Default: "^([ \t]*[|>:}#])+"
3336 # A regular expression used in the internal-pager to determine quoted
3337 # sections of text in the body of a message.
3339 # Note: In order to use the quotedx patterns in the
3340 # internal pager, you need to set this to a regular expression that
3341 # matches exactly the quote characters at the beginning of quoted
3352 # If set to a value greater than 0, Mutt will display which message it
3353 # is currently on when reading a mailbox or when performing search actions
3354 # such as search and limit. The message is printed after
3355 # read_inc messages have been read or searched (e.g., if set to 25, Mutt will
3356 # print a message when it is at message 25, and then again when it gets
3357 # to message 50). This variable is meant to indicate progress when
3358 # reading or searching large mailboxes which may take some time.
3359 # When set to 0, only a single message will appear before the reading
3362 # Also see the ``$write_inc'' variable and the ``Tuning'' section of the
3363 # manual for performance considerations.
3373 # If set, all folders are opened in read-only mode.
3383 # This variable specifies what "real" or "personal" name should be used
3384 # when sending messages.
3386 # By default, this is the GECOS field from /etc/passwd. Note that this
3387 # variable will not be used when the user has set a real name
3388 # in the $from variable.
3391 # set recall=ask-yes
3398 # Controls whether or not Mutt recalls postponed messages
3399 # when composing a new message. Also see ``$postponed''.
3401 # Setting this variable to ``yes'' is not generally useful, and thus not
3406 # set record="~/sent"
3413 # This specifies the file into which your outgoing messages should be
3414 # appended. (This is meant as the primary method for saving a copy of
3415 # your messages, but another way to do this is using the ``my_hdr''
3416 # command to create a Bcc: field with your email address in it.)
3418 # The value of $record is overridden by the ``$force_name'' and
3419 # ``$save_name'' variables, and the ``fcc-hook'' command.
3421 #set record="=outgoing"
3424 # set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
3426 # Name: reply_regexp
3427 # Type: regular expression
3428 # Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
3431 # A regular expression used to recognize reply messages when threading
3432 # and replying. The default value corresponds to the English "Re:" and
3435 set reply_regexp="^((re([-[(]?[[:digit:]]+[)]]?)?|a(nt)?w(ort)?|wg|s(gkb|v)):[[:space:]]*)+"
3444 # If unset and you are replying to a message sent by you, Mutt will
3445 # assume that you want to reply to the recipients of that message rather
3449 # set reply_to=ask-yes
3456 # If set, when replying to a message, Mutt will use the address listed
3457 # in the Reply-to: header as the recipient of the reply. If unset,
3458 # it will use the address in the From: header field instead. This
3459 # option is useful for reading a mailing list that sets the Reply-To:
3460 # header field to the list address and you want to send a private
3461 # message to the author of a message.
3471 # When set, the cursor will be automatically advanced to the next
3472 # (possibly undeleted) message whenever a command that modifies the
3473 # current message is executed.
3476 # set reverse_alias=no
3478 # Name: reverse_alias
3483 # This variable controls whether or not Mutt will display the "personal"
3484 # name from your aliases in the index menu if it finds an alias that
3485 # matches the message's sender. For example, if you have the following
3488 # alias juser abd30425@somewhere.net (Joe User)
3490 # and then you receive mail which contains the following header:
3492 # From: abd30425@somewhere.net
3494 # It would be displayed in the index menu as ``Joe User'' instead of
3495 # ``abd30425@somewhere.net.'' This is useful when the person's e-mail
3496 # address is not human friendly (like CompuServe addresses).
3499 # set reverse_name=no
3501 # Name: reverse_name
3506 # It may sometimes arrive that you receive mail to a certain machine,
3507 # move the messages to another machine, and reply to some the messages
3508 # from there. If this variable is set, the default From: line of
3509 # the reply messages is built using the address where you received the
3510 # messages you are replying to if that address matches your
3511 # alternates. If the variable is unset, or the address that would be
3512 # used doesn't match your alternates, the From: line will use
3513 # your address on the current machine.
3515 set reverse_name=yes
3517 # set reverse_realname=yes
3519 # Name: reverse_realname
3524 # This variable fine-tunes the behaviour of the reverse_name feature.
3525 # When it is set, mutt will use the address from incoming messages as-is,
3526 # possibly including eventual real names. When it is unset, mutt will
3527 # override any such real names with the setting of the realname variable.
3530 # set rfc2047_parameters=no
3532 # Name: rfc2047_parameters
3537 # When this variable is set, Mutt will decode RFC-2047-encoded MIME
3538 # parameters. You want to set this variable when mutt suggests you
3539 # to save attachments to files named like this:
3540 # =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
3542 # When this variable is set interactively, the change doesn't have
3543 # the desired effect before you have changed folders.
3545 # Note that this use of RFC 2047's encoding is explicitly,
3546 # prohibited by the standard, but nevertheless encountered in the
3548 # Also note that setting this parameter will not have the effect
3549 # that mutt generates this kind of encoding. Instead, mutt will
3550 # unconditionally use the encoding specified in RFC 2231.
3552 set rfc2047_parameters=yes
3554 # set save_address=no
3556 # Name: save_address
3561 # If set, mutt will take the sender's full address when choosing a
3562 # default folder for saving a mail. If ``$save_name'' or ``$force_name''
3563 # is set too, the selection of the fcc folder will be changed as well.
3566 # set save_empty=yes
3573 # When unset, mailboxes which contain no saved messages will be removed
3574 # when closed (the exception is ``$spoolfile'' which is never removed).
3575 # If set, mailboxes are never removed.
3577 # Note: This only applies to mbox and MMDF folders, Mutt does not
3578 # delete MH and Maildir directories.
3581 # set save_history=0
3583 # Name: save_history
3588 # This variable controls the size of the history saved in the
3589 # ``$history_file'' file.
3591 set save_history=100
3600 # This variable controls how copies of outgoing messages are saved.
3601 # When set, a check is made to see if a mailbox specified by the
3602 # recipient address exists (this is done by searching for a mailbox in
3603 # the ``$folder'' directory with the username part of the
3604 # recipient address). If the mailbox exists, the outgoing message will
3605 # be saved to that mailbox, otherwise the message is saved to the
3606 # ``$record'' mailbox.
3608 # Also see the ``$force_name'' variable.
3618 # When this variable is unset, scoring is turned off. This can
3619 # be useful to selectively disable scoring for certain folders when the
3620 # ``$score_threshold_delete'' variable and friends are used.
3623 # set score_threshold_delete=-1
3625 # Name: score_threshold_delete
3630 # Messages which have been assigned a score equal to or lower than the value
3631 # of this variable are automatically marked for deletion by mutt. Since
3632 # mutt scores are always greater than or equal to zero, the default setting
3633 # of this variable will never mark a message for deletion.
3636 # set score_threshold_flag=9999
3638 # Name: score_threshold_flag
3643 # Messages which have been assigned a score greater than or equal to this
3644 # variable's value are automatically marked "flagged".
3647 # set score_threshold_read=-1
3649 # Name: score_threshold_read
3654 # Messages which have been assigned a score equal to or lower than the value
3655 # of this variable are automatically marked as read by mutt. Since
3656 # mutt scores are always greater than or equal to zero, the default setting
3657 # of this variable will never mark a message read.
3660 # set send_charset="us-ascii:iso-8859-1:utf-8"
3662 # Name: send_charset
3664 # Default: "us-ascii:iso-8859-1:utf-8"
3667 # A colon-delimited list of character sets for outgoing messages. Mutt will use the
3668 # first character set into which the text can be converted exactly.
3669 # If your ``$charset'' is not iso-8859-1 and recipients may not
3670 # understand UTF-8, it is advisable to include in the list an
3671 # appropriate widely used standard character set (such as
3672 # iso-8859-2, koi8-r or iso-2022-jp) either instead of or after
3675 # In case the text cannot be converted into one of these exactly,
3676 # mutt uses ``$charset'' as a fallback.
3679 # set sendmail="/usr/sbin/sendmail -oem -oi"
3683 # Default: "/usr/sbin/sendmail -oem -oi"
3686 # Specifies the program and arguments used to deliver mail sent by Mutt.
3687 # Mutt expects that the specified program interprets additional
3688 # arguments as recipient addresses.
3690 #set sendmail="/bin/true"
3691 set sendmail="$my_confdir/sendmail"
3692 #set sendmail="/usr/sbin/sendmail -oem -oi"
3694 # set sendmail_wait=0
3696 # Name: sendmail_wait
3701 # Specifies the number of seconds to wait for the ``$sendmail'' process
3702 # to finish before giving up and putting delivery in the background.
3704 # Mutt interprets the value of this variable as follows:
3705 # >0 number of seconds to wait for sendmail to finish before continuing
3706 # 0 wait forever for sendmail to finish
3707 # <0 always put sendmail in the background without waiting
3710 # Note that if you specify a value other than 0, the output of the child
3711 # process will be put in a temporary file. If there is some error, you
3712 # will be informed as to where to find the output.
3722 # Command to use when spawning a subshell. By default, the user's login
3723 # shell from /etc/passwd is used.
3726 # set sig_dashes=yes
3733 # If set, a line containing ``-- '' will be inserted before your
3734 # ``$signature''. It is strongly recommended that you not unset
3735 # this variable unless your ``signature'' contains just your name. The
3736 # reason for this is because many software packages use ``-- \n'' to
3737 # detect your signature. For example, Mutt has the ability to highlight
3738 # the signature in a different color in the builtin pager.
3749 # If set, the signature will be included before any quoted or forwarded
3750 # text. It is strongly recommended that you do not set this variable
3751 # unless you really know what you are doing, and are prepared to take
3752 # some heat from netiquette guardians.
3755 # set signature="~/.signature"
3759 # Default: "~/.signature"
3762 # Specifies the filename of your signature, which is appended to all
3763 # outgoing messages. If the filename ends with a pipe (``|''), it is
3764 # assumed that filename is a shell command and input should be read from
3767 #set signature="~/.mutt/getsignature|"
3769 # set simple_search="~f %s | ~s %s"
3771 # Name: simple_search
3773 # Default: "~f %s | ~s %s"
3776 # Specifies how Mutt should expand a simple search into a real search
3777 # pattern. A simple search is one that does not contain any of the ~
3778 # operators. See ``patterns'' for more information on search patterns.
3780 # For example, if you simply type joe at a search or limit prompt, Mutt
3781 # will automatically expand it to the value specified by this variable.
3782 # For the default value it would be:
3785 set simple_search="~L %s | ~s %s"
3787 # set smart_wrap=yes
3794 # Controls the display of lines longer than the screen width in the
3795 # internal pager. If set, long lines are wrapped at a word boundary. If
3796 # unset, lines are simply wrapped at the screen edge. Also see the
3797 # ``$markers'' variable.
3800 # set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
3803 # Type: regular expression
3804 # Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
3807 # The pager uses this variable to catch some common false
3808 # positives of ``$quote_regexp'', most notably smileys in the beginning
3819 # Specifies time, in seconds, to pause while displaying certain informational
3820 # messages, while moving from folder to folder and after expunging
3821 # messages from the current folder. The default is to pause one second, so
3822 # a value of zero for this option suppresses the pause.
3825 # set smtp_authenticators=""
3827 # Name: smtp_authenticators
3832 # This is a colon-delimited list of authentication methods mutt may
3833 # attempt to use to log in to an SMTP server, in the order mutt should
3834 # try them. Authentication methods are any SASL mechanism, eg
3835 # ``digest-md5'', ``gssapi'' or ``cram-md5''.
3836 # This parameter is case-insensitive. If this parameter is unset
3837 # (the default) mutt will try all available methods, in order from
3838 # most-secure to least-secure.
3840 # Example: set smtp_authenticators="digest-md5:cram-md5"
3850 # Specifies the password for your SMTP account. If unset, Mutt will
3851 # prompt you for your password when you first send mail via SMTP.
3852 # See ``smtp_url'' to configure mutt to send mail via SMTP.
3853 # Warning: you should only use this option when you are on a
3854 # fairly secure machine, because the superuser can read your muttrc even
3855 # if you are the only one who can read the file.
3865 # Defines the SMTP ``smart'' host where sent messages should relayed for
3866 # delivery. This should take the form of an SMTP URL, eg:
3868 # smtp[s]://[user[:pass]@]host[:port]/
3870 # Setting this variable overrides the value of the ``$sendmail''
3881 # Specifies how to sort messages in the index menu. Valid values
3887 # mailbox-order (unsorted)
3895 # You may optionally use the reverse- prefix to specify reverse sorting
3896 # order (example: set sort=reverse-date-sent).
3898 # Note: On Debian systems, this option is set by default to
3899 # ``threads'' in /etc/Muttrc.
3903 # set sort_alias=alias
3910 # Specifies how the entries in the `alias' menu are sorted. The
3911 # following are legal values:
3913 # address (sort alphabetically by email address)
3914 # alias (sort alphabetically by alias name)
3915 # unsorted (leave in order specified in .muttrc)
3925 # When sorting by threads, this variable controls how threads are sorted
3926 # in relation to other threads, and how the branches of the thread trees
3927 # are sorted. This can be set to any value that ``$sort'' can, except
3928 # threads (in that case, mutt will just use date-sent). You can also
3929 # specify the last- prefix in addition to the reverse- prefix, but last-
3930 # must come after reverse-. The last- prefix causes messages to be
3931 # sorted against its siblings by which has the last descendant, using
3932 # the rest of sort_aux as an ordering. For instance, set sort_aux=last-
3933 # date-received would mean that if a new message is received in a
3934 # thread, that thread becomes the last one displayed (or the first, if
3935 # you have set sort=reverse-threads.) Note: For reversed ``$sort''
3936 # order $sort_aux is reversed again (which is not the right thing to do,
3937 # but kept to not break any existing configuration setting).
3939 set sort_aux=last-date-received
3941 # set sort_browser=alpha
3943 # Name: sort_browser
3948 # Specifies how to sort entries in the file browser. By default, the
3949 # entries are sorted alphabetically. Valid values:
3951 # alpha (alphabetically)
3956 # You may optionally use the reverse- prefix to specify reverse sorting
3957 # order (example: set sort_browser=reverse-date).
3967 # This variable is only useful when sorting by threads with
3968 # ``$strict_threads'' unset. In that case, it changes the heuristic
3969 # mutt uses to thread messages by subject. With sort_re set, mutt will
3970 # only attach a message as the child of another message by subject if
3971 # the subject of the child message starts with a substring matching the
3972 # setting of ``$reply_regexp''. With sort_re unset, mutt will attach
3973 # the message whether or not this is the case, as long as the
3974 # non-``$reply_regexp'' parts of both messages are identical.
3977 # set spam_separator=","
3979 # Name: spam_separator
3984 # ``spam_separator'' controls what happens when multiple spam headers
3985 # are matched: if unset, each successive header will overwrite any
3986 # previous matches value for the spam label. If set, each successive
3987 # match will append to the previous, using ``spam_separator'' as a
3998 # If your spool mailbox is in a non-default place where Mutt cannot find
3999 # it, you can specify its location with this variable. Mutt will
4000 # automatically set this variable to the value of the environment
4001 # variable $MAIL if it is not set.
4003 set spoolfile="=inbox"
4005 # set status_chars="-*%A"
4007 # Name: status_chars
4012 # Controls the characters used by the "%r" indicator in
4013 # ``$status_format''. The first character is used when the mailbox is
4014 # unchanged. The second is used when the mailbox has been changed, and
4015 # it needs to be resynchronized. The third is used if the mailbox is in
4016 # read-only mode, or if the mailbox will not be written when exiting
4017 # that mailbox (You can toggle whether to write changes to a mailbox
4018 # with the toggle-write operation, bound by default to "%"). The fourth
4019 # is used to indicate that the current folder has been opened in attach-
4020 # message mode (Certain operations like composing a new mail, replying,
4021 # forwarding, etc. are not permitted in this mode).
4024 # set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
4026 # Name: status_format
4028 # Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
4031 # Controls the format of the status line displayed in the index
4032 # menu. This string is similar to ``$index_format'', but has its own
4033 # set of printf()-like sequences:
4035 # %b number of mailboxes with new mail *
4036 # %d number of deleted messages *
4037 # %f the full pathname of the current mailbox
4038 # %F number of flagged messages *
4040 # %l size (in bytes) of the current mailbox *
4041 # %L size (in bytes) of the messages shown
4042 # (i.e., which match the current limit) *
4043 # %m the number of messages in the mailbox *
4044 # %M the number of messages shown (i.e., which match the current limit) *
4045 # %n number of new messages in the mailbox *
4046 # %o number of old unread messages *
4047 # %p number of postponed messages *
4048 # %P percentage of the way through the index
4049 # %r modified/read-only/won't-write/attach-message indicator,
4050 # according to $status_chars
4051 # %s current sorting mode ($sort)
4052 # %S current aux sorting method ($sort_aux)
4053 # %t number of tagged messages *
4054 # %u number of unread messages *
4055 # %v Mutt version string
4056 # %V currently active limit pattern, if any *
4057 # %>X right justify the rest of the string and pad with "X"
4058 # %|X pad to the end of the line with "X"
4059 # %*X soft-fill with character "X" as pad
4062 # For an explanation of `soft-fill', see the ``$index_format'' documentation.
4064 # * = can be optionally printed if nonzero
4066 # Some of the above sequences can be used to optionally print a string
4067 # if their value is nonzero. For example, you may only want to see the
4068 # number of flagged messages if such messages exist, since zero is not
4069 # particularly meaningful. To optionally print a string based upon one
4070 # of the above sequences, the following construct is used:
4072 # %?<sequence_char>?<optional_string>?
4074 # where sequence_char is a character from the table above, and
4075 # optional_string is the string you would like printed if
4076 # sequence_char is nonzero. optional_string may contain
4077 # other sequences as well as normal text, but you may not nest
4080 # Here is an example illustrating how to optionally print the number of
4081 # new messages in a mailbox:
4082 # %?n?%n new messages.?
4084 # You can also switch between two strings using the following construct:
4086 # %?<sequence_char>?<if_string>&<else_string>?
4088 # If the value of sequence_char is non-zero, if_string will
4089 # be expanded, otherwise else_string will be expanded.
4091 # You can force the result of any printf-like sequence to be lowercase
4092 # by prefixing the sequence character with an underscore (_) sign.
4093 # For example, if you want to display the local hostname in lowercase,
4097 # If you prefix the sequence character with a colon (:) character, mutt
4098 # will replace any dots in the expansion by underscores. This might be helpful
4099 # with IMAP folders that don't like dots in folder names.
4101 set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?%V ?(%s/%S) %> (%P) "
4103 # set status_on_top=no
4105 # Name: status_on_top
4110 # Setting this variable causes the ``status bar'' to be displayed on
4111 # the first line of the screen rather than near the bottom.
4114 # set strict_threads=no
4116 # Name: strict_threads
4121 # If set, threading will only make use of the ``In-Reply-To'' and
4122 # ``References'' fields when you ``$sort'' by message threads. By
4123 # default, messages with the same subject are grouped together in
4124 # ``pseudo threads.''. This may not always be desirable, such as in a
4125 # personal mailbox where you might have several unrelated messages with
4126 # the subject ``hi'' which will get grouped together. See also
4127 # ``$sort_re'' for a less drastic way of controlling this
4130 set strict_threads=yes
4139 # When unset, mutt won't stop when the user presses the terminal's
4140 # susp key, usually ``control-Z''. This is useful if you run mutt
4141 # inside an xterm using a command like xterm -e mutt.
4144 # set text_flowed=no
4151 # When set, mutt will generate text/plain; format=flowed attachments.
4152 # This format is easier to handle for some mailing software, and generally
4153 # just looks like ordinary text. To actually make use of this format's
4154 # features, you'll need support in your editor.
4156 # Note that $indent_string is ignored when this option is set.
4160 # set thread_received=no
4162 # Name: thread_received
4166 set thread_received=yes
4168 # When set, mutt uses the date received rather than the date sent
4169 # to thread messages by subject.
4172 # set thorough_search=no
4174 # Name: thorough_search
4179 # Affects the ~b and ~h search operations described in
4180 # section ``patterns'' above. If set, the headers and attachments of
4181 # messages to be searched are decoded before searching. If unset,
4182 # messages are searched as they appear in the folder.
4184 set thorough_search=yes
4193 # When set, the internal-pager will pad blank lines to the bottom of the
4194 # screen with a tilde (~).
4205 # Along with ``read_inc'', ``write_inc'', and ``net_inc'', this
4206 # variable controls the frequency with which progress updates are
4207 # displayed. It suppresses updates less than ``time_inc'' milliseconds
4208 # apart. This can improve throughput on systems with slow terminals,
4209 # or when running mutt on a remote system.
4219 # When Mutt is waiting for user input either idleing in menus or
4220 # in an interactive prompt, Mutt would block until input is
4221 # present. Depending on the context, this would prevent certain
4222 # operations from working, like checking for new mail or keeping
4223 # an IMAP connection alive.
4225 # This variable controls how many seconds Mutt will at most wait
4226 # until it aborts waiting for input, performs these operations and
4227 # continues to wait for input.
4229 # A value of zero or less will cause Mutt to never time out.
4239 # This variable allows you to specify where Mutt will place its
4240 # temporary files needed for displaying and composing messages. If
4241 # this variable is not set, the environment variable TMPDIR is
4242 # used. If TMPDIR is not set then "/tmp" is used.
4245 # set to_chars=" +TCFL"
4252 # Controls the character used to indicate mail addressed to you. The
4253 # first character is the one used when the mail is NOT addressed to your
4254 # address (default: space). The second is used when you are the only
4255 # recipient of the message (default: +). The third is when your address
4256 # appears in the TO header field, but you are not the only recipient of
4257 # the message (default: T). The fourth character is used when your
4258 # address is specified in the CC header field, but you are not the only
4259 # recipient. The fifth character is used to indicate mail that was sent
4260 # by you. The sixth character is used to indicate when a mail
4261 # was sent to a mailing-list you subscribe to (default: L).
4271 # If set, this variable specifies the path of the trash folder where the
4272 # mails marked for deletion will be moved, instead of being irremediably
4275 # NOTE: When you delete a message in the trash folder, it is really
4276 # deleted, so that you have a way to clean the trash.
4286 # Setting this variable will cause mutt to open a pipe to a command
4287 # instead of a raw socket. You may be able to use this to set up
4288 # preauthenticated connections to your IMAP/POP3 server. Example:
4290 # tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
4292 # NOTE: For this example to work you must be able to log in to the remote
4293 # machine without having to enter a password.
4296 # set use_8bitmime=no
4298 # Name: use_8bitmime
4303 # Warning: do not set this variable unless you are using a version
4304 # of sendmail which supports the -B8BITMIME flag (such as sendmail
4305 # 8.8.x) or you may not be able to send mail.
4307 # When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME
4308 # flag when sending 8-bit messages to enable ESMTP negotiation.
4311 # set use_domain=yes
4318 # When set, Mutt will qualify all local addresses (ones without the
4319 # @host portion) with the value of ``$hostname''. If unset, no
4320 # addresses will be qualified.
4323 # set use_envelope_from=no
4325 # Name: use_envelope_from
4330 # When set, mutt will set the envelope sender of the message.
4331 # If ``$envelope_from_address'' is set, it will be used as the sender
4332 # address. If not, mutt will attempt to derive the sender from the
4335 # Note that this information is passed to sendmail command using the
4336 # "-f" command line switch. Therefore setting this option is not useful
4337 # if the ``$sendmail'' variable already contains "-f" or if the
4338 # executable pointed to by $sendmail doesn't support the "-f" switch.
4340 set use_envelope_from=yes
4349 # When set, Mutt will generate the `From:' header field when
4350 # sending messages. If unset, no `From:' header field will be
4351 # generated unless the user explicitly sets one using the ``my_hdr''
4362 # When set, Mutt will show you international domain names decoded.
4363 # Note: You can use IDNs for addresses even if this is unset.
4364 # This variable only affects decoding.
4374 # When set, Mutt will look for IPv6 addresses of hosts it tries to
4375 # contact. If this option is unset, Mutt will restrict itself to IPv4 addresses.
4376 # Normally, the default should work.
4379 # set user_agent=yes
4386 # When set, mutt will add a "User-Agent" header to outgoing
4387 # messages, indicating which version of mutt was used for composing
4398 # Specifies the visual editor to invoke when the ~v command is
4399 # given in the builtin editor.
4409 # Controls whether Mutt will ask you to press a key after shell-
4410 # escape, pipe-message, pipe-entry, print-message,
4411 # and print-entry commands.
4413 # It is also used when viewing attachments with ``auto_view'', provided
4414 # that the corresponding mailcap entry has a needsterminal flag,
4415 # and the external program is interactive.
4417 # When set, Mutt will always ask for a key. When unset, Mutt will wait
4418 # for a key only if the external command returned a non-zero status.
4429 # When set, mutt will weed headers when displaying, forwarding,
4430 # printing, or replying to messages.
4440 # When set to a positive value, mutt will wrap text at $wrap characters.
4441 # When set to a negative value, mutt will wrap text so that there are $wrap
4442 # characters of empty space on the right side of the terminal.
4446 # set wrap_search=yes
4453 # Controls whether searches wrap around the end of the mailbox.
4455 # When set, searches will wrap around the first (or last) message. When
4456 # unset, searches will not wrap.
4466 # (DEPRECATED) Equivalent to setting wrap with a negative value.
4476 # When writing a mailbox, a message will be printed every
4477 # write_inc messages to indicate progress. If set to 0, only a
4478 # single message will be displayed before writing a mailbox.
4480 # Also see the ``$read_inc'' variable.
4490 # Controls whether mutt writes out the Bcc header when preparing
4491 # messages to be sent. Exim users may wish to unset this. If mutt
4492 # is set to deliver directly via SMTP (see ``$smtp_url''), this
4493 # option does nothing: mutt will never write out the BCC header
4496 # Note: On Debian systems, exim4 and postfix strip BCC headers by
4497 # default. The above warning applies to exim3 users, see /etc/Muttrc.
4500 # set xterm_icon="M%?n?AIL&ail?"
4504 # Default: "M%?n?AIL&ail?"
4507 # Controls the format of the icon title, as long as xterm_set_titles
4508 # is enabled. This string is identical in formatting to the one used by
4509 # ``$status_format''.
4512 # set xterm_set_titles=no
4514 # Name: xterm_set_titles
4519 # Controls whether mutt sets the xterm title bar and icon name
4520 # (as long as you are in an appropriate terminal).
4522 set xterm_set_titles=yes
4524 # set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
4528 # Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
4531 # Controls the format of the title bar of the xterm provided that
4532 # xterm_set_titles has been set. This string is identical in formatting
4533 # to the one used by ``$status_format''.
4535 set xterm_title="mutt@%h [%?M?%M/?%m, n:%n]%?V? [%V]?"
4538 auto_view text/html application/ics text/calendar
4539 #auto_view application/x-gunzip application/x-tar-gz application/x-tar application/x-gtar
4540 #auto_view application/postscript
4541 alternative_order multipart/mixed multipart/related text/html text/enriched text/*
4542 #alternative_order text/plain text/enriched text/html
4543 #alternative_order text/enriched text/plain text application/postscript image/*
4544 mime_lookup application/octet-stream
4546 source $my_confdir/colours
4547 source $my_confdir/headers
4548 source $my_confdir/alternates
4549 source $my_confdir/keybindings
4550 source $my_confdir/lists
4551 source $my_confdir/spam
4552 source $my_confdir/hooks
4554 set my_mutt_mailboxes = "$VARDIR/mutt/mailboxes"
4555 source "test -f $my_mutt_mailboxes && cat $my_mutt_mailboxes|"
4556 #source "$my_confdir/list-mailboxes $folder $spoolfile|"
4558 set alias_file="$my_confdir/aliases"
4559 source "test -f $alias_file && cat $alias_file 2>/dev/null || echo unset alias_file|"
4561 source $my_confdir/sidebar