All patches and comments are welcome. Please squash your changes to logical
commits before using git-format-patch and git-send-email to
patches@git.madduck.net.
If you'd read over the Git project's submission guidelines and adhered to them,
I'd be especially grateful.
1 # from /usr/share/doc/mutt/examples/Muttrc.gz
3 set my_confdir="~/.mutt"
5 # set abort_nosubject=ask-yes
7 # Name: abort_nosubject
12 # If set to yes, when composing messages and no subject is given
13 # at the subject prompt, composition will be aborted. If set to
14 # no, composing messages with no subject given at the subject
15 # prompt will never be aborted.
18 # set abort_unmodified=yes
20 # Name: abort_unmodified
25 # If set to yes, composition will automatically abort after
26 # editing the message body if no changes are made to the file (this
27 # check only happens after the first edit of the file). When set
28 # to no, composition will never be aborted.
31 # set alias_file="~/.muttrc"
35 # Default: "~/.muttrc"
37 set alias_file="$my_confdir/aliases"
38 source $my_confdir/aliases
40 # The default file in which to save aliases created by the
41 # ``create-alias'' function.
43 # Note: Mutt will not automatically source this file; you must
44 # explicitly use the ``source'' command for it to be executed.
46 # The default for this option is the currently used muttrc file, or
47 # ``~/.muttrc'' if no user muttrc was found.
50 # set alias_format="%4n %2f %t %-10a %r"
54 # Default: "%4n %2f %t %-10a %r"
57 # Specifies the format of the data displayed for the `alias' menu. The
58 # following printf(3)-style sequences are available:
61 # %f flags - currently, a "d" for an alias marked for deletion
63 # %r address which alias expands to
64 # %t character which indicates if the alias is tagged for inclusion
74 # Controls whether 8-bit data is converted to 7-bit using either Quoted-
75 # Printable or Base64 encoding when sending mail.
85 # Controls whether ANSI color codes in messages (and color tags in
86 # rich text messages) are to be interpreted.
87 # Messages containing these codes are rare, but if this option is set,
88 # their text will be colored accordingly. Note that this may override
89 # your color choices, and even present a security problem, since a
90 # message could include a line like "[-- PGP output follows ..." and
91 # give it the same color as your attachment color.
101 # When set, an arrow (``->'') will be used to indicate the current entry
102 # in menus instead of highlighting the whole line. On slow network or modem
103 # links this will make response faster because there is less that has to
104 # be redrawn on the screen when moving to the next or previous entries
115 # If set, Mutt will use plain ASCII characters when displaying thread
116 # and attachment trees, instead of the default ACS characters.
126 # If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
127 # before editing an outgoing message.
137 # If set, Mutt will prompt you for carbon-copy (Cc) recipients before
138 # editing the body of an outgoing message.
141 # set assumed_charset=""
143 # Name: assumed_charset
148 # This variable is a colon-separated list of character encoding
149 # schemes for messages without character encoding indication.
150 # Header field values and message body content without character encoding
151 # indication would be assumed that they are written in one of this list.
152 # By default, all the header fields and message body without any charset
153 # indication are assumed to be in "us-ascii".
155 # For example, Japanese users might prefer this:
157 # set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
159 # However, only the first content is valid for the message body.
162 # set attach_charset=""
164 # Name: attach_charset
169 # This variable is a colon-separated list of character encoding
170 # schemes for text file attachments.
171 # If unset, $charset value will be used instead.
172 # For example, the following configuration would work for Japanese
175 # set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8"
177 # Note: "iso-2022-*" must be put at the head of the value as shown above
181 # set attach_format="%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
183 # Name: attach_format
185 # Default: "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] "
188 # This variable describes the format of the `attachment' menu. The
189 # following printf-style sequences are understood:
192 # %c requires charset conversion (n or c)
195 # %e MIME content-transfer-encoding
197 # %I disposition (I=inline, A=attachment)
200 # %n attachment number
201 # %Q "Q", if MIME part qualifies for attachment counting
204 # %T graphic tree characters
205 # %u unlink (=to delete) flag
206 # %X number of qualifying MIME parts in this part and its children
207 # (please see the ``attachments'' section for possible speed effects)
208 # %>X right justify the rest of the string and pad with character "X"
209 # %|X pad to the end of the line with character "X"
212 # set attach_sep="\n"
219 # The separator to add between attachments when operating (saving,
220 # printing, piping, etc) on a list of tagged attachments.
223 # set attach_split=yes
230 # If this variable is unset, when operating (saving, printing, piping,
231 # etc) on a list of tagged attachments, Mutt will concatenate the
232 # attachments and will operate on them as a single attachment. The
233 # ``$attach_sep'' separator is added after each attachment. When set,
234 # Mutt will operate on the attachments one by one.
237 # set attribution="On %d, %n wrote:"
241 # Default: "On %d, %n wrote:"
244 # This is the string that will precede a message which has been included
245 # in a reply. For a full listing of defined printf()-like sequences see
246 # the section on ``$index_format''.
248 set attribution="also sprach %n <%a> [%[%Y.%m.%d.%H%M %z]]:"
257 # When set along with ``$edit_headers'', Mutt will skip the initial
258 # send-menu and allow you to immediately begin editing the body of your
259 # message. The send-menu may still be accessed once you have finished
260 # editing the body of your message.
262 # Also see ``$fast_reply''.
273 # When set, functions in the index menu which affect a message
274 # will be applied to all tagged messages (if there are any). When
275 # unset, you must first use the tag-prefix function (default: ";") to
276 # make the next function apply to all tagged messages.
286 # When this variable is set, mutt will beep when an error occurs.
297 # When this variable is set, mutt will beep whenever it prints a message
298 # notifying you of new mail. This is independent of the setting of the
299 # ``$beep'' variable.
309 # Controls whether you will be asked to confirm bouncing messages.
310 # If set to yes you don't get asked if you want to bounce a
311 # message. Setting this variable to no is not generally useful,
312 # and thus not recommended, because you are unable to bounce messages.
315 # set bounce_delivered=yes
317 # Name: bounce_delivered
322 # When this variable is set, mutt will include Delivered-To headers when
323 # bouncing messages. Postfix users may wish to unset this variable.
325 # Note: On Debian systems, this option is unset by default in
329 # set braille_friendly=no
331 # Name: braille_friendly
336 # When this variable is set, mutt will place the cursor at the beginning
337 # of the current line in menus, even when the arrow_cursor variable
338 # is unset, making it easier for blind persons using Braille displays to
339 # follow these menus. The option is disabled by default because many
340 # visual terminals don't permit making the cursor invisible.
343 # set check_mbox_size=no
345 # Name: check_mbox_size
350 # When this variable is set, mutt will use file size attribute instead of
351 # access time when checking for new mail.
361 # Character set your terminal uses to display and enter textual data.
371 # Note: this option only affects maildir and MH style
374 # When set, Mutt will check for new mail delivered while the
375 # mailbox is open. Especially with MH mailboxes, this operation can
376 # take quite some time since it involves scanning the directory and
377 # checking each file to see if it has already been looked at. If
378 # check_new is unset, no check for new mail is performed
379 # while the mailbox is open.
382 # set collapse_unread=yes
384 # Name: collapse_unread
389 # When unset, Mutt will not collapse a thread if it contains any
393 # set uncollapse_jump=no
395 # Name: uncollapse_jump
400 # When set, Mutt will jump to the next unread message, if any,
401 # when the current thread is uncollapsed.
404 # set compose_format="-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
406 # Name: compose_format
408 # Default: "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-"
411 # Controls the format of the status line displayed in the Compose
412 # menu. This string is similar to ``$status_format'', but has its own
413 # set of printf()-like sequences:
415 # %a total number of attachments
417 # %l approximate size (in bytes) of the current message
418 # %v Mutt version string
421 # See the text describing the ``$status_format'' option for more
422 # information on how to set ``$compose_format''.
425 # set config_charset=""
427 # Name: config_charset
432 # When defined, Mutt will recode commands in rc files from this
436 # set confirmappend=yes
438 # Name: confirmappend
443 # When set, Mutt will prompt for confirmation when appending messages to
444 # an existing mailbox.
448 # set confirmcreate=yes
450 # Name: confirmcreate
455 # When set, Mutt will prompt for confirmation when saving messages to a
456 # mailbox which does not yet exist before creating it.
459 # set connect_timeout=30
461 # Name: connect_timeout
466 # Causes Mutt to timeout a network connection (for IMAP or POP) after this
467 # many seconds if the connection is not able to be established. A negative
468 # value causes Mutt to wait indefinitely for the connection to succeed.
471 # set content_type="text/plain"
475 # Default: "text/plain"
478 # Sets the default Content-Type for the body of newly composed messages.
488 # This variable controls whether or not copies of your outgoing messages
489 # will be saved for later references. Also see ``$record'',
490 # ``$save_name'', ``$force_name'' and ``fcc-hook''.
494 # set crypt_use_gpgme=no
496 # Name: crypt_use_gpgme
501 # This variable controls the use of the GPGME-enabled crypto backends.
502 # If it is set and Mutt was built with gpgme support, the gpgme code for
503 # S/MIME and PGP will be used instead of the classic code. Note that
504 # you need to set this option in .muttrc; it won't have any effect when
505 # used interactively.
508 # set crypt_use_pka=no
510 # Name: crypt_use_pka
515 # (http://www.g10code.de/docs/pka-intro.de.pdf) during signature
516 # verification (only supported by the GPGME backend).
519 # set crypt_autopgp=yes
521 # Name: crypt_autopgp
526 # This variable controls whether or not mutt may automatically enable
527 # PGP encryption/signing for messages. See also ``$crypt_autoencrypt'',
528 # ``$crypt_replyencrypt'',
529 # ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
532 # set crypt_autosmime=yes
534 # Name: crypt_autosmime
539 # This variable controls whether or not mutt may automatically enable
540 # S/MIME encryption/signing for messages. See also ``$crypt_autoencrypt'',
541 # ``$crypt_replyencrypt'',
542 # ``$crypt_autosign'', ``$crypt_replysign'' and ``$smime_is_default''.
545 # set date_format="!%a, %b %d, %Y at %I:%M:%S%p %Z"
549 # Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
552 # This variable controls the format of the date printed by the ``%d''
553 # sequence in ``$index_format''. This is passed to the strftime
554 # call to process the date. See the man page for strftime(3) for
557 # Unless the first character in the string is a bang (``!''), the month
558 # and week day names are expanded according to the locale specified in
559 # the variable ``$locale''. If the first character in the string is a
560 # bang, the bang is discarded, and the month and week day names in the
561 # rest of the string are expanded in the C locale (that is in US
564 set date_format="%d %b %Y %T%Z"
566 # set default_hook="~f %s !~P | (~P ~C %s)"
570 # Default: "~f %s !~P | (~P ~C %s)"
573 # This variable controls how message-hooks, reply-hooks, send-hooks,
574 # send2-hooks, save-hooks, and fcc-hooks will
575 # be interpreted if they are specified with only a simple regexp,
576 # instead of a matching pattern. The hooks are expanded when they are
577 # declared, so a hook will be interpreted according to the value of this
578 # variable at the time the hook is declared. The default value matches
579 # if the message is either from a user matching the regular expression
580 # given, or if it is from you (if the from address matches
581 # ``alternates'') and is to or cc'ed to a user matching the given
582 # regular expression.
592 # Controls whether or not messages are really deleted when closing or
593 # synchronizing a mailbox. If set to yes, messages marked for
594 # deleting will automatically be purged without prompting. If set to
595 # no, messages marked for deletion will be kept in the mailbox.
599 # set delete_untag=yes
606 # If this option is set, mutt will untag messages when marking them
607 # for deletion. This applies when you either explicitly delete a message,
608 # or when you save it to another folder.
611 # set digest_collapse=yes
613 # Name: digest_collapse
618 # If this option is set, mutt's received-attachments menu will not show the subparts of
619 # individual messages in a multipart/digest. To see these subparts, press 'v' on that menu.
622 # set display_filter=""
624 # Name: display_filter
629 # When set, specifies a command used to filter messages. When a message
630 # is viewed it is passed as standard input to $display_filter, and the
631 # filtered message is read from the standard output.
634 # set dotlock_program="/usr/bin/mutt_dotlock"
636 # Name: dotlock_program
638 # Default: "/usr/bin/mutt_dotlock"
641 # Contains the path of the mutt_dotlock (8) binary to be used by
652 # Note: you should not enable this unless you are using Sendmail
655 # This variable sets the request for when notification is returned. The
656 # string consists of a comma separated list (no spaces!) of one or more
657 # of the following: never, to never request notification,
658 # failure, to request notification on transmission failure,
659 # delay, to be notified of message delays, success, to be
660 # notified of successful transmission.
662 # Example: set dsn_notify="failure,delay"
672 # Note: you should not enable this unless you are using Sendmail
675 # This variable controls how much of your message is returned in DSN
676 # messages. It may be set to either hdrs to return just the
677 # message header, or full to return the full message.
679 # Example: set dsn_return=hdrs
682 # set duplicate_threads=yes
684 # Name: duplicate_threads
689 # This variable controls whether mutt, when sorting by threads, threads
690 # messages with the same message-id together. If it is set, it will indicate
691 # that it thinks they are duplicates of each other with an equals sign
692 # in the thread diagram.
695 # set edit_headers=no
702 # This option allows you to edit the header of your outgoing messages
703 # along with the body of your message.
714 # This variable specifies which editor is used by mutt.
715 # It defaults to the value of the VISUAL, or EDITOR, environment
716 # variable, or to the string "/usr/bin/editor" if neither of those are set.
718 set editor="mailplate --edit --auto --keep-unknown"
727 # When set, mutt will quoted-printable encode messages when
728 # they contain the string "From " in the beginning of a line.
729 # Useful to avoid the tampering certain mail delivery and transport
730 # agents tend to do with messages.
733 # set envelope_from_address=""
735 # Name: envelope_from_address
736 # Type: e-mail address
740 # Manually sets the envelope sender for outgoing messages.
741 # This value is ignored if ``$use_envelope_from'' is unset.
751 # Escape character to use for functions in the builtin editor.
761 # When set, the initial prompt for recipients and subject are skipped
762 # when replying to messages, and the initial prompt for subject is
763 # skipped when forwarding messages.
765 # Note: this variable has no effect when the ``$autoedit''
777 # This variable controls whether or not attachments on outgoing messages
778 # are saved along with the main body of your message.
789 # When this variable is set, FCCs will be stored unencrypted and
790 # unsigned, even when the actual message is encrypted and/or
795 # set folder="~/Mail"
802 # Specifies the default location of your mailboxes. A `+' or `=' at the
803 # beginning of a pathname will be expanded to the value of this
804 # variable. Note that if you change this variable from the default
805 # value you need to make sure that the assignment occurs before
806 # you use `+' or `=' for any other variables since expansion takes place
807 # during the `set' command.
811 # set folder_format="%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
813 # Name: folder_format
815 # Default: "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f"
818 # This variable allows you to customize the file browser display to your
819 # personal taste. This string is similar to ``$index_format'', but has
820 # its own set of printf()-like sequences:
822 # %C current file number
823 # %d date/time folder was last modified
825 # %F file permissions
826 # %g group name (or numeric gid, if missing)
827 # %l number of hard links
828 # %N N if folder has new mail, blank otherwise
830 # %t * if the file is tagged, blank otherwise
831 # %u owner name (or numeric uid, if missing)
832 # %>X right justify the rest of the string and pad with character "X"
833 # %|X pad to the end of the line with character "X"
836 # set followup_to=yes
843 # Controls whether or not the Mail-Followup-To header field is
844 # generated when sending mail. When set, Mutt will generate this
845 # field when you are replying to a known mailing list, specified with
846 # the ``subscribe'' or ``lists'' commands.
848 # This field has two purposes. First, preventing you from
849 # receiving duplicate copies of replies to messages which you send
850 # to mailing lists, and second, ensuring that you do get a reply
851 # separately for any messages sent to known lists to which you are
852 # not subscribed. The header will contain only the list's address
853 # for subscribed lists, and both the list address and your own
854 # email address for unsubscribed lists. Without this header, a
855 # group reply to your message sent to a subscribed list will be
856 # sent to both the list and your address, resulting in two copies
857 # of the same email for you.
867 # This variable is similar to ``$save_name'', except that Mutt will
868 # store a copy of your outgoing message by the username of the address
869 # you are sending to even if that mailbox does not exist.
871 # Also see the ``$record'' variable.
874 # set forward_decode=yes
876 # Name: forward_decode
881 # Controls the decoding of complex MIME messages into text/plain when
882 # forwarding a message. The message header is also RFC2047 decoded.
883 # This variable is only used, if ``$mime_forward'' is unset,
884 # otherwise ``$mime_forward_decode'' is used instead.
887 # set forward_edit=yes
894 # This quadoption controls whether or not the user is automatically
895 # placed in the editor when forwarding messages. For those who always want
896 # to forward with no modification, use a setting of ``no''.
899 # set forward_format="[%a: %s]"
901 # Name: forward_format
903 # Default: "[%a: %s]"
906 # This variable controls the default subject when forwarding a message.
907 # It uses the same format sequences as the ``$index_format'' variable.
910 # set forward_quote=no
912 # Name: forward_quote
917 # When set forwarded messages included in the main body of the
918 # message (when ``$mime_forward'' is unset) will be quoted using
919 # ``$indent_string''.
925 # Type: e-mail address
929 # When set, this variable contains a default from address. It
930 # can be overridden using my_hdr (including from send-hooks) and
931 # ``$reverse_name''. This variable is ignored if ``$use_from''
934 # Defaults to the contents of the environment variable EMAIL.
936 set from='martin f krafft <madduck@madduck.net>'
938 # set gecos_mask="^[^,]*"
941 # Type: regular expression
945 # A regular expression used by mutt to parse the GECOS field of a password
946 # entry when expanding the alias. By default the regular expression is set
947 # to "^[^,]*" which will return the string up to the first "," encountered.
948 # If the GECOS field contains a string like "lastname, firstname" then you
949 # should set the gecos_mask=".*".
951 # This can be useful if you see the following behavior: you address a e-mail
952 # to user ID stevef whose full name is Steve Franklin. If mutt expands
953 # stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to
954 # a regular expression that will match the whole name so mutt will expand
955 # "Franklin" to "Franklin, Steve".
965 # When unset, the header fields normally added by the ``my_hdr''
966 # command are not created. This variable must be unset before
967 # composing a new message or replying in order to take effect. If set,
968 # the user defined header fields are added to every new message.
978 # When set, this variable causes Mutt to include the header
979 # of the message you are replying to into the edit buffer.
980 # The ``$weed'' setting applies.
990 # When set, help lines describing the bindings for the major functions
991 # provided by each menu are displayed on the first line of the screen.
993 # Note: The binding will not be displayed correctly if the
994 # function is bound to a sequence rather than a single keystroke. Also,
995 # the help line may not be updated if a binding is changed while Mutt is
996 # running. Since this variable is primarily aimed at new users, neither
997 # of these should present a major problem.
1000 # set hidden_host=no
1007 # When set, mutt will skip the host name part of ``$hostname'' variable
1008 # when adding the domain part to addresses. This variable does not
1009 # affect the generation of Message-IDs, and it will not lead to the
1010 # cut-off of first-level domains.
1013 # set hide_limited=no
1015 # Name: hide_limited
1020 # When set, mutt will not show the presence of messages that are hidden
1021 # by limiting, in the thread tree.
1024 # set hide_missing=yes
1026 # Name: hide_missing
1031 # When set, mutt will not show the presence of missing messages in the
1035 # set hide_thread_subject=yes
1037 # Name: hide_thread_subject
1042 # When set, mutt will not show the subject of messages in the thread
1043 # tree that have the same subject as their parent or closest previously
1044 # displayed sibling.
1047 # set hide_top_limited=no
1049 # Name: hide_top_limited
1054 # When set, mutt will not show the presence of messages that are hidden
1055 # by limiting, at the top of threads in the thread tree. Note that when
1056 # $hide_limited is set, this option will have no effect.
1059 # set hide_top_missing=yes
1061 # Name: hide_top_missing
1066 # When set, mutt will not show the presence of missing messages at the
1067 # top of threads in the thread tree. Note that when $hide_missing is
1068 # set, this option will have no effect.
1078 # This variable controls the size (in number of strings remembered) of
1079 # the string history buffer. The buffer is cleared each time the
1083 # set history_file="~/.mutthistory"
1085 # Name: history_file
1087 # Default: "~/.mutthistory"
1090 # The file in which Mutt will save its history.
1092 set history_file="~/.var/mutt/history"
1094 # set honor_followup_to=yes
1096 # Name: honor_followup_to
1101 # This variable controls whether or not a Mail-Followup-To header is
1102 # honored when group-replying to a message.
1112 # Specifies the hostname to use after the ``@'' in local e-mail
1113 # addresses. This overrides the compile time definition obtained from
1116 # Note: On Debian systems, the default for this variable is obtained
1117 # from /etc/mailname when Mutt starts.
1120 # set ignore_linear_white_space=no
1122 # Name: ignore_linear_white_space
1127 # This option replaces linear-white-space between encoded-word
1128 # and *text to a single space to prevent the display of MIME-encoded
1129 # ``Subject'' field from being divided into multiple lines.
1132 # set ignore_list_reply_to=no
1134 # Name: ignore_list_reply_to
1139 # Affects the behaviour of the reply function when replying to
1140 # messages from mailing lists. When set, if the ``Reply-To:'' field is
1141 # set to the same value as the ``To:'' field, Mutt assumes that the
1142 # ``Reply-To:'' field was set by the mailing list to automate responses
1143 # to the list, and will ignore this field. To direct a response to the
1144 # mailing list when this option is set, use the list-reply
1145 # function; group-reply will reply to both the sender and the
1148 set ignore_list_reply_to=yes
1150 # set imap_authenticators=""
1152 # Name: imap_authenticators
1157 # This is a colon-delimited list of authentication methods mutt may
1158 # attempt to use to log in to an IMAP server, in the order mutt should
1159 # try them. Authentication methods are either 'login' or the right
1160 # side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi'
1161 # or 'cram-md5'. This parameter is case-insensitive. If this
1162 # parameter is unset (the default) mutt will try all available methods,
1163 # in order from most-secure to least-secure.
1165 # Example: set imap_authenticators="gssapi:cram-md5:login"
1167 # Note: Mutt will only fall back to other authentication methods if
1168 # the previous methods are unavailable. If a method is available but
1169 # authentication fails, mutt will not connect to the IMAP server.
1172 # set imap_check_subscribed=no
1174 # Name: imap_check_subscribed
1179 # When set, mutt will fetch the set of subscribed folders from
1180 # your server on connection, and add them to the set of mailboxes
1181 # it polls for new mail. See also the ``mailboxes'' command.
1184 # set imap_delim_chars="/."
1186 # Name: imap_delim_chars
1191 # This contains the list of characters which you would like to treat
1192 # as folder separators for displaying IMAP paths. In particular it
1193 # helps in using the '=' shortcut for your folder variable.
1196 # set imap_headers=""
1198 # Name: imap_headers
1203 # Mutt requests these header fields in addition to the default headers
1204 # ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE
1205 # CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP
1206 # servers before displaying the index menu. You may want to add more
1207 # headers for spam detection. Note: This is a space separated list.
1217 # When set, mutt will attempt to use the IMAP IDLE extension
1218 # to check for new mail in the current mailbox. Some servers
1219 # (dovecot was the inspiration for this option) react badly
1220 # to mutt's implementation. If your connection seems to freeze
1221 # up periodically, try unsetting this.
1224 # set imap_keepalive=900
1226 # Name: imap_keepalive
1231 # This variable specifies the maximum amount of time in seconds that mutt
1232 # will wait before polling open IMAP connections, to prevent the server
1233 # from closing them before mutt has finished with them. The default is
1234 # well within the RFC-specified minimum amount of time (30 minutes) before
1235 # a server is allowed to do this, but in practice the RFC does get
1236 # violated every now and then. Reduce this number if you find yourself
1237 # getting disconnected from your IMAP server due to inactivity.
1240 # set imap_list_subscribed=no
1242 # Name: imap_list_subscribed
1247 # This variable configures whether IMAP folder browsing will look for
1248 # only subscribed folders or all folders. This can be toggled in the
1249 # IMAP browser with the toggle-subscribed function.
1259 # Your login name on the IMAP server.
1261 # This variable defaults to the value of imap_user.
1271 # Specifies the password for your IMAP account. If unset, Mutt will
1272 # prompt you for your password when you invoke the fetch-mail function.
1273 # Warning: you should only use this option when you are on a
1274 # fairly secure machine, because the superuser can read your muttrc even
1275 # if you are the only one who can read the file.
1278 # set imap_passive=yes
1280 # Name: imap_passive
1285 # When set, mutt will not open new IMAP connections to check for new
1286 # mail. Mutt will only check for new mail over existing IMAP
1287 # connections. This is useful if you don't want to be prompted to
1288 # user/password pairs on mutt invocation, or if opening the connection
1299 # When set, mutt will avoid implicitly marking your mail as read whenever
1300 # you fetch a message from the server. This is generally a good thing,
1301 # but can make closing an IMAP folder somewhat slower. This option
1302 # exists to appease speed freaks.
1305 # set imap_servernoise=yes
1307 # Name: imap_servernoise
1312 # When set, mutt will display warning messages from the IMAP
1313 # server as error messages. Since these messages are often
1314 # harmless, or generated due to configuration problems on the
1315 # server which are out of the users' hands, you may wish to suppress
1316 # them at some point.
1326 # The name of the user whose mail you intend to access on the IMAP
1329 # This variable defaults to your user name on the local machine.
1332 # set implicit_autoview=no
1334 # Name: implicit_autoview
1339 # If set to ``yes'', mutt will look for a mailcap entry with the
1340 # copiousoutput flag set for every MIME attachment it doesn't have
1341 # an internal viewer defined for. If such an entry is found, mutt will
1342 # use the viewer defined in that entry to convert the body part to text
1345 set implicit_autoview=yes
1347 # set include=ask-yes
1354 # Controls whether or not a copy of the message(s) you are replying to
1355 # is included in your reply.
1359 # set include_onlyfirst=no
1361 # Name: include_onlyfirst
1366 # Controls whether or not Mutt includes only the first attachment
1367 # of the message you are replying.
1370 # set indent_string="> "
1372 # Name: indent_string
1377 # Specifies the string to prepend to each line of text quoted in a
1378 # message to which you are replying. You are strongly encouraged not to
1379 # change this value, as it tends to agitate the more fanatical netizens.
1382 # set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
1384 # Name: index_format
1386 # Default: "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s"
1389 # This variable allows you to customize the message index display to
1390 # your personal taste.
1392 # ``Format strings'' are similar to the strings used in the ``C''
1393 # function printf to format output (see the man page for more detail).
1394 # The following sequences are defined in Mutt:
1396 # %a address of the author
1397 # %A reply-to address (if present; otherwise: address of author)
1398 # %b filename of the original message folder (think mailBox)
1399 # %B the list to which the letter was sent, or else the folder name (%b).
1400 # %c number of characters (bytes) in the message
1401 # %C current message number
1402 # %d date and time of the message in the format specified by
1403 # ``date_format'' converted to sender's time zone
1404 # %D date and time of the message in the format specified by
1405 # ``date_format'' converted to the local time zone
1406 # %e current message number in thread
1407 # %E number of messages in current thread
1408 # %f entire From: line (address + real name)
1409 # %F author name, or recipient name if the message is from you
1410 # %H spam attribute(s) of this message
1411 # %i message-id of the current message
1412 # %l number of lines in the message (does not work with maildir,
1413 # mh, and possibly IMAP folders)
1414 # %L If an address in the To or CC header field matches an address
1415 # defined by the users ``subscribe'' command, this displays
1416 # "To <list-name>", otherwise the same as %F.
1417 # %m total number of message in the mailbox
1418 # %M number of hidden messages if the thread is collapsed.
1420 # %n author's real name (or address if missing)
1421 # %O (_O_riginal save folder) Where mutt would formerly have
1422 # stashed the message: list name or recipient name if no list
1423 # %P progress indicator for the builtin pager (how much of the file has been displayed)
1424 # %s subject of the message
1425 # %S status of the message (N/D/d/!/r/*)
1426 # %t `to:' field (recipients)
1427 # %T the appropriate character from the $to_chars string
1428 # %u user (login) name of the author
1429 # %v first name of the author, or the recipient if the message is from you
1430 # %X number of attachments
1431 # (please see the ``attachments'' section for possible speed effects)
1432 # %y `x-label:' field, if present
1433 # %Y `x-label' field, if present, and (1) not at part of a thread tree,
1434 # (2) at the top of a thread, or (3) `x-label' is different from
1435 # preceding message's `x-label'.
1436 # %Z message status flags
1437 # %{fmt} the date and time of the message is converted to sender's
1438 # time zone, and ``fmt'' is expanded by the library function
1439 # ``strftime''; a leading bang disables locales
1440 # %[fmt] the date and time of the message is converted to the local
1441 # time zone, and ``fmt'' is expanded by the library function
1442 # ``strftime''; a leading bang disables locales
1443 # %(fmt) the local date and time when the message was received.
1444 # ``fmt'' is expanded by the library function ``strftime'';
1445 # a leading bang disables locales
1446 # %<fmt> the current local time. ``fmt'' is expanded by the library
1447 # function ``strftime''; a leading bang disables locales.
1448 # %>X right justify the rest of the string and pad with character "X"
1449 # %|X pad to the end of the line with character "X"
1452 # See also: ``$to_chars''.
1454 set index_format="%4C %Z %{%b %d} %-15.15F (%?l?%4l&%4c?) %?H?[%H] ?%s"
1456 # set ispell="ispell"
1463 # How to invoke ispell (GNU's spell-checking software).
1466 # set keep_flagged=no
1468 # Name: keep_flagged
1473 # If set, read messages marked as flagged will not be moved
1474 # from your spool mailbox to your ``$mbox'' mailbox, or as a result of
1475 # a ``mbox-hook'' command.
1485 # The locale used by strftime(3) to format dates. Legal values are
1486 # the strings your system accepts for the locale variable LC_TIME.
1496 # This variable configures how often (in seconds) mutt should look for
1500 # set mailcap_path=""
1502 # Name: mailcap_path
1507 # This variable specifies which files to consult when attempting to
1508 # display MIME bodies not directly supported by Mutt.
1511 # set mailcap_sanitize=yes
1513 # Name: mailcap_sanitize
1518 # If set, mutt will restrict possible characters in mailcap % expandos
1519 # to a well-defined set of safe characters. This is the safe setting,
1520 # but we are not sure it doesn't break some more advanced MIME stuff.
1522 # DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
1526 # set maildir_mtime=no
1528 # Name: maildir_mtime
1533 # If set, the sort-by-date option in the browser will sort maildirs
1534 # smartly, not using the mtime of the maildir itself but that of the
1535 # newest message in the new subdirectory, making the sorting by
1536 # reverse date much more useful. People with maildirs over NFS may
1537 # wish to leave this option unset.
1539 set maildir_mtime=yes
1541 # set header_cache=""
1543 # Name: header_cache
1548 # The header_cache variable points to the header cache database.
1549 # If header_cache points to a directory it will contain a header cache
1550 # database per folder. If header_cache points to a file that file will
1551 # be a single global header cache. By default it is unset so no header
1552 # caching will be used.
1554 set header_cache="~/.var/mutt/header_cache"
1556 # set maildir_header_cache_verify=yes
1558 # Name: maildir_header_cache_verify
1563 # Check for Maildir unaware programs other than mutt having modified maildir
1564 # files when the header cache is in use. This incurs one stat(2) per
1565 # message every time the folder is opened.
1567 set maildir_header_cache_verify=no
1569 # set header_cache_pagesize="16384"
1571 # Name: header_cache_pagesize
1576 # When mutt is compiled with either gdbm or bdb4 as the header cache backend,
1577 # this option changes the database page size. Too large or too small
1578 # values can waste space, memory, or CPU time. The default should be more
1579 # or less optimal for most use cases.
1581 set header_cache_pagesize=32768
1583 # set maildir_trash=no
1585 # Name: maildir_trash
1590 # If set, messages marked as deleted will be saved with the maildir
1591 # (T)rashed flag instead of unlinked. NOTE: this only applies
1592 # to maildir-style mailboxes. Setting it will have no effect on other
1603 # Controls whether or not mutt marks new unread
1604 # messages as old if you exit a mailbox without reading them.
1605 # With this option set, the next time you start mutt, the messages
1606 # will show up with an "O" next to them in the index menu,
1607 # indicating that they are old.
1618 # Controls the display of wrapped lines in the internal pager. If set, a
1619 # ``+'' marker is displayed at the beginning of wrapped lines. Also see
1620 # the ``$smart_wrap'' variable.
1624 # set mask="!^\\.[^.]"
1627 # Type: regular expression
1628 # Default: "!^\\.[^.]"
1631 # A regular expression used in the file browser, optionally preceded by
1632 # the not operator ``!''. Only files whose names match this mask
1633 # will be shown. The match is always case-sensitive.
1643 # This specifies the folder into which read mail in your ``$spoolfile''
1644 # folder will be appended.
1647 # set mbox_type=mbox
1650 # Type: folder magic
1654 # The default mailbox type used when creating new folders. May be any of
1655 # mbox, MMDF, MH and Maildir.
1657 set mbox_type=Maildir
1666 # If unset, Mutt will remove your address (see the ``alternates''
1667 # command) from the list of recipients when replying to a message.
1670 # set menu_context=0
1672 # Name: menu_context
1678 # This variable controls the number of lines of context that are given
1679 # when scrolling through menus. (Similar to ``$pager_context''.)
1682 # set menu_move_off=yes
1684 # Name: menu_move_off
1689 # When unset, the bottom entry of menus will never scroll up past
1690 # the bottom of the screen, unless there are less entries than lines.
1691 # When set, the bottom entry may move off the bottom.
1694 # set menu_scroll=no
1702 # When set, menus will be scrolled up or down one line when you
1703 # attempt to move across a screen boundary. If unset, the screen
1704 # is cleared and the next or previous page of the menu is displayed
1705 # (useful for slow links to avoid many redraws).
1715 # If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
1716 # set as if the user had pressed the ESC key and whatever key remains
1717 # after having the high bit removed. For example, if the key pressed
1718 # has an ASCII value of 0xf8, then this is treated as if the user had
1719 # pressed ESC then ``x''. This is because the result of removing the
1720 # high bit from ``0xf8'' is ``0x78'', which is the ASCII character
1731 # When unset, mutt will mimic mh's behaviour and rename deleted messages
1732 # to ,<old file name> in mh folders instead of really deleting
1733 # them. If the variable is set, the message files will simply be
1737 # set mh_seq_flagged="flagged"
1739 # Name: mh_seq_flagged
1741 # Default: "flagged"
1744 # The name of the MH sequence used for flagged messages.
1747 # set mh_seq_replied="replied"
1749 # Name: mh_seq_replied
1751 # Default: "replied"
1754 # The name of the MH sequence used to tag replied messages.
1757 # set mh_seq_unseen="unseen"
1759 # Name: mh_seq_unseen
1764 # The name of the MH sequence used for unseen messages.
1767 # set mime_forward=no
1769 # Name: mime_forward
1774 # When set, the message you are forwarding will be attached as a
1775 # separate MIME part instead of included in the main body of the
1776 # message. This is useful for forwarding MIME messages so the receiver
1777 # can properly view the message as it was delivered to you. If you like
1778 # to switch between MIME and not MIME from mail to mail, set this
1779 # variable to ask-no or ask-yes.
1781 # Also see ``$forward_decode'' and ``$mime_forward_decode''.
1783 set mime_forward=ask-yes
1785 # set mime_forward_decode=no
1787 # Name: mime_forward_decode
1792 # Controls the decoding of complex MIME messages into text/plain when
1793 # forwarding a message while ``$mime_forward'' is set. Otherwise
1794 # ``$forward_decode'' is used instead.
1797 # set mime_forward_rest=yes
1799 # Name: mime_forward_rest
1804 # When forwarding multiple attachments of a MIME message from the recvattach
1805 # menu, attachments which cannot be decoded in a reasonable manner will
1806 # be attached to the newly composed message if this option is set.
1809 # set pgp_mime_signature_filename="signature.asc"
1811 # Name: pgp_mime_signature_filename
1813 # Default: "signature.asc"
1816 # This option sets the filename used for signature parts in PGP/MIME
1819 set pgp_mime_signature_filename="digital_signature_gpg.asc"
1821 # set pgp_mime_signature_description="Digital signature"
1823 # Name: pgp_mime_signature_description
1825 # Default: "Digital signature"
1827 set pgp_mime_signature_description="Digital signature (see http://martin-krafft.net/gpg/)"
1829 # This option sets the Content-Description used for signature parts in
1830 # PGP/MIME signed messages.
1833 # set mix_entry_format="%4n %c %-16s %a"
1835 # Name: mix_entry_format
1837 # Default: "%4n %c %-16s %a"
1840 # This variable describes the format of a remailer line on the mixmaster
1841 # chain selection screen. The following printf-like sequences are
1844 # %n The running number on the menu.
1845 # %c Remailer capabilities.
1846 # %s The remailer's short name.
1847 # %a The remailer's e-mail address.
1850 # set mixmaster="mixmaster"
1854 # Default: "mixmaster"
1857 # This variable contains the path to the Mixmaster binary on your
1858 # system. It is used with various sets of parameters to gather the
1859 # list of known remailers, and to finally send a message through the
1862 # Note: On Debian systems, this option is set by default to
1863 # ``mixmaster-filter'' in /etc/Muttrc.
1873 # Controls whether or not Mutt will move read messages
1874 # from your spool mailbox to your ``$mbox'' mailbox, or as a result of
1875 # a ``mbox-hook'' command.
1879 # set message_cachedir=""
1881 # Name: message_cachedir
1886 # Set this to a directory and mutt will cache copies of messages from
1887 # your IMAP and POP servers here. You are free to remove entries at any
1888 # time, for instance if stale entries accumulate because you have
1889 # deleted messages with another mail client.
1892 # set message_cache_clean=no
1894 # Name: message_cache_clean
1899 # If set, mutt will clean out obsolete entries from the cache when
1900 # the mailbox is synchronized. You probably only want to set it
1901 # every once in a while, since it can be a little slow.
1904 # set message_format="%s"
1906 # Name: message_format
1911 # This is the string displayed in the ``attachment'' menu for
1912 # attachments of type message/rfc822. For a full listing of defined
1913 # printf()-like sequences see the section on ``$index_format''.
1916 # set narrow_tree=no
1923 # This variable, when set, makes the thread tree narrower, allowing
1924 # deeper threads to fit on the screen.
1935 # Operations that expect to transfer a large amount of data over the
1936 # network will update their progress every net_inc kilobytes.
1937 # If set to 0, no progress messages will be displayed.
1939 # See also ``$read_inc'' and ``$write_inc''.
1942 # set pager="builtin"
1946 # Default: "builtin"
1949 # This variable specifies which pager you would like to use to view
1950 # messages. builtin means to use the builtin pager, otherwise this
1951 # variable should specify the pathname of the external pager you would
1954 # Using an external pager may have some disadvantages: Additional
1955 # keystrokes are necessary because you can't call mutt functions
1956 # directly from the pager, and screen resizes cause lines longer than
1957 # the screen width to be badly formatted in the help menu.
1960 # set pager_context=0
1962 # Name: pager_context
1967 # This variable controls the number of lines of context that are given
1968 # when displaying the next or previous page in the internal pager. By
1969 # default, Mutt will display the line after the last one on the screen
1970 # at the top of the next page (0 lines of context).
1974 # set pager_format="-%Z- %C/%m: %-20.20n %s%> -- (%P)"
1976 # Name: pager_format
1978 # Default: "-%Z- %C/%m: %-20.20n %s%> -- (%P)"
1981 # This variable controls the format of the one-line message ``status''
1982 # displayed before each message in either the internal or an external
1983 # pager. The valid sequences are listed in the ``$index_format''
1987 # set pager_index_lines=0
1989 # Name: pager_index_lines
1994 # Determines the number of lines of a mini-index which is shown when in
1995 # the pager. The current message, unless near the top or bottom of the
1996 # folder, will be roughly one third of the way down this mini-index,
1997 # giving the reader the context of a few messages before and after the
1998 # message. This is useful, for example, to determine how many messages
1999 # remain to be read in the current thread. One of the lines is reserved
2000 # for the status bar from the index, so a pager_index_lines of 6
2001 # will only show 5 lines of the actual index. A value of 0 results in
2002 # no index being shown. If the number of messages in the current folder
2003 # is less than pager_index_lines, then the index will only use as
2004 # many lines as it needs.
2014 # When set, the internal-pager will not move to the next message
2015 # when you are at the end of a message and invoke the next-page
2020 # set crypt_autosign=no
2022 # Name: crypt_autosign
2027 # Setting this variable will cause Mutt to always attempt to
2028 # cryptographically sign outgoing messages. This can be overridden
2029 # by use of the pgp-menu, when signing is not required or
2030 # encryption is requested as well. If ``$smime_is_default'' is set,
2031 # then OpenSSL is used instead to create S/MIME messages and settings can
2032 # be overridden by use of the smime-menu.
2035 set crypt_autosign=yes
2037 # set crypt_autoencrypt=no
2039 # Name: crypt_autoencrypt
2044 # Setting this variable will cause Mutt to always attempt to PGP
2045 # encrypt outgoing messages. This is probably only useful in
2046 # connection to the send-hook command. It can be overridden
2047 # by use of the pgp-menu, when encryption is not required or
2048 # signing is requested as well. IF ``$smime_is_default'' is set,
2049 # then OpenSSL is used instead to create S/MIME messages and
2050 # settings can be overridden by use of the smime-menu.
2054 # set pgp_ignore_subkeys=yes
2056 # Name: pgp_ignore_subkeys
2061 # Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead,
2062 # the principal key will inherit the subkeys' capabilities. Unset this
2063 # if you want to play interesting key selection games.
2067 # set crypt_replyencrypt=yes
2069 # Name: crypt_replyencrypt
2074 # If set, automatically PGP or OpenSSL encrypt replies to messages which are
2079 # set crypt_replysign=no
2081 # Name: crypt_replysign
2086 # If set, automatically PGP or OpenSSL sign replies to messages which are
2089 # Note: this does not work on messages that are encrypted
2093 set crypt_replysign=yes
2095 # set crypt_replysignencrypted=no
2097 # Name: crypt_replysignencrypted
2102 # If set, automatically PGP or OpenSSL sign replies to messages
2103 # which are encrypted. This makes sense in combination with
2104 # ``$crypt_replyencrypt'', because it allows you to sign all
2105 # messages which are automatically encrypted. This works around
2106 # the problem noted in ``$crypt_replysign'', that mutt is not able
2107 # to find out whether an encrypted message is also signed.
2110 set crypt_replysignencrypted=yes
2112 # set crypt_timestamp=yes
2114 # Name: crypt_timestamp
2119 # If set, mutt will include a time stamp in the lines surrounding
2120 # PGP or S/MIME output, so spoofing such lines is more difficult.
2121 # If you are using colors to mark these lines, and rely on these,
2122 # you may unset this setting.
2126 # set pgp_use_gpg_agent=no
2128 # Name: pgp_use_gpg_agent
2133 # If set, mutt will use a possibly-running gpg-agent process.
2136 set pgp_use_gpg_agent=yes
2138 # set crypt_verify_sig=yes
2140 # Name: crypt_verify_sig
2145 # If ``yes'', always attempt to verify PGP or S/MIME signatures.
2146 # If ``ask'', ask whether or not to verify the signature.
2147 # If ``no'', never attempt to verify cryptographic signatures.
2151 # set smime_is_default=no
2153 # Name: smime_is_default
2158 # The default behaviour of mutt is to use PGP on all auto-sign/encryption
2159 # operations. To override and to use OpenSSL instead this must be set.
2160 # However, this has no effect while replying, since mutt will automatically
2161 # select the same application that was used to sign/encrypt the original
2162 # message. (Note that this variable can be overridden by unsetting $crypt_autosmime.)
2166 # set smime_ask_cert_label=yes
2168 # Name: smime_ask_cert_label
2173 # This flag controls whether you want to be asked to enter a label
2174 # for a certificate about to be added to the database or not. It is
2179 # set smime_decrypt_use_default_key=yes
2181 # Name: smime_decrypt_use_default_key
2186 # If set (default) this tells mutt to use the default key for decryption. Otherwise,
2187 # if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address
2188 # to determine the key to use. It will ask you to supply a key, if it can't find one.
2192 # set pgp_entry_format="%4n %t%f %4l/0x%k %-4a %2c %u"
2194 # Name: pgp_entry_format
2196 # Default: "%4n %t%f %4l/0x%k %-4a %2c %u"
2199 # This variable allows you to customize the PGP key selection menu to
2200 # your personal taste. This string is similar to ``$index_format'', but
2201 # has its own set of printf()-like sequences:
2210 # %t trust/validity of the key-uid association
2211 # %[<s>] date of the key where <s> is an strftime(3) expression
2217 # set pgp_good_sign=""
2219 # Name: pgp_good_sign
2220 # Type: regular expression
2224 # If you assign a text to this variable, then a PGP signature is only
2225 # considered verified if the output from $pgp_verify_command contains
2226 # the text. Use this variable if the exit code from the command is 0
2227 # even for bad signatures.
2231 # set pgp_check_exit=yes
2233 # Name: pgp_check_exit
2238 # If set, mutt will check the exit code of the PGP subprocess when
2239 # signing or encrypting. A non-zero exit code means that the
2240 # subprocess failed.
2244 # set pgp_long_ids=no
2246 # Name: pgp_long_ids
2251 # If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs.
2255 # set pgp_retainable_sigs=no
2257 # Name: pgp_retainable_sigs
2262 # If set, signed and encrypted messages will consist of nested
2263 # multipart/signed and multipart/encrypted body parts.
2265 # This is useful for applications like encrypted and signed mailing
2266 # lists, where the outer layer (multipart/encrypted) can be easily
2267 # removed, while the inner multipart/signed part is retained.
2270 set pgp_retainable_sigs=yes
2272 # set pgp_autoinline=no
2274 # Name: pgp_autoinline
2279 # This option controls whether Mutt generates old-style inline
2280 # (traditional) PGP encrypted or signed messages under certain
2281 # circumstances. This can be overridden by use of the pgp-menu,
2282 # when inline is not required.
2284 # Note that Mutt might automatically use PGP/MIME for messages
2285 # which consist of more than a single MIME part. Mutt can be
2286 # configured to ask before sending PGP/MIME messages when inline
2287 # (traditional) would not work.
2288 # See also: ``$pgp_mime_auto''.
2290 # Also note that using the old-style PGP message format is strongly
2295 # set pgp_replyinline=no
2297 # Name: pgp_replyinline
2302 # Setting this variable will cause Mutt to always attempt to
2303 # create an inline (traditional) message when replying to a
2304 # message which is PGP encrypted/signed inline. This can be
2305 # overridden by use of the pgp-menu, when inline is not
2306 # required. This option does not automatically detect if the
2307 # (replied-to) message is inline; instead it relies on Mutt
2308 # internals for previously checked/flagged messages.
2310 # Note that Mutt might automatically use PGP/MIME for messages
2311 # which consist of more than a single MIME part. Mutt can be
2312 # configured to ask before sending PGP/MIME messages when inline
2313 # (traditional) would not work.
2314 # See also: ``$pgp_mime_auto''.
2316 # Also note that using the old-style PGP message format is strongly
2321 # set pgp_show_unusable=yes
2323 # Name: pgp_show_unusable
2328 # If set, mutt will display non-usable keys on the PGP key selection
2329 # menu. This includes keys which have been revoked, have expired, or
2330 # have been marked as ``disabled'' by the user.
2334 # set pgp_sign_as=""
2341 # If you have more than one key pair, this option allows you to specify
2342 # which of your private keys to use. It is recommended that you use the
2343 # keyid form to specify your key (e.g., ``0x00112233'').
2346 set pgp_sign_as="0x330c4a75"
2348 # set pgp_strict_enc=yes
2350 # Name: pgp_strict_enc
2355 # If set, Mutt will automatically encode PGP/MIME signed messages as
2356 # quoted-printable. Please note that unsetting this variable may
2357 # lead to problems with non-verifyable PGP signatures, so only change
2358 # this if you know what you are doing.
2362 # set pgp_timeout=300
2369 # The number of seconds after which a cached passphrase will expire if
2374 # set pgp_sort_keys=address
2376 # Name: pgp_sort_keys
2381 # Specifies how the entries in the `pgp keys' menu are sorted. The
2382 # following are legal values:
2384 # address sort alphabetically by user id
2385 # keyid sort alphabetically by key id
2386 # date sort by key creation date
2387 # trust sort by the trust of the key
2390 # If you prefer reverse order of the above values, prefix it with
2395 # set pgp_mime_auto=ask-yes
2397 # Name: pgp_mime_auto
2402 # This option controls whether Mutt will prompt you for
2403 # automatically sending a (signed/encrypted) message using
2404 # PGP/MIME when inline (traditional) fails (for any reason).
2406 # Also note that using the old-style PGP message format is strongly
2411 # set pgp_auto_decode=no
2413 # Name: pgp_auto_decode
2418 # If set, mutt will automatically attempt to decrypt traditional PGP
2419 # messages whenever the user performs an operation which ordinarily would
2420 # result in the contents of the message being operated on. For example,
2421 # if the user displays a pgp-traditional message which has not been manually
2422 # checked with the check-traditional-pgp function, mutt will automatically
2423 # check the message for traditional pgp.
2425 set pgp_auto_decode=yes
2427 # set pgp_decode_command=""
2429 # Name: pgp_decode_command
2434 # This format strings specifies a command which is used to decode
2435 # application/pgp attachments.
2437 # The PGP command formats have their own set of printf-like sequences:
2439 # %p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty
2440 # string otherwise. Note: This may be used with a %? construct.
2441 # %f Expands to the name of a file containing a message.
2442 # %s Expands to the name of a file containing the signature part
2443 # of a multipart/signed attachment when verifying it.
2444 # %a The value of $pgp_sign_as.
2445 # %r One or more key IDs.
2448 # For examples on how to configure these formats for the various versions
2449 # of PGP which are floating around, see the pgp*.rc and gpg.rc files in
2450 # the samples/ subdirectory which has been installed on your system
2451 # alongside the documentation.
2455 # set pgp_getkeys_command=""
2457 # Name: pgp_getkeys_command
2462 # This command is invoked whenever mutt will need public key information.
2463 # %r is the only printf-like sequence used with this format.
2467 # set pgp_verify_command=""
2469 # Name: pgp_verify_command
2474 # This command is used to verify PGP signatures.
2478 # set pgp_decrypt_command=""
2480 # Name: pgp_decrypt_command
2485 # This command is used to decrypt a PGP encrypted message.
2489 # set pgp_clearsign_command=""
2491 # Name: pgp_clearsign_command
2496 # This format is used to create a old-style "clearsigned" PGP
2497 # message. Note that the use of this format is strongly
2502 # set pgp_sign_command=""
2504 # Name: pgp_sign_command
2509 # This command is used to create the detached PGP signature for a
2510 # multipart/signed PGP/MIME body part.
2514 # set pgp_encrypt_sign_command=""
2516 # Name: pgp_encrypt_sign_command
2521 # This command is used to both sign and encrypt a body part.
2525 # set pgp_encrypt_only_command=""
2527 # Name: pgp_encrypt_only_command
2532 # This command is used to encrypt a body part without signing it.
2536 # set pgp_import_command=""
2538 # Name: pgp_import_command
2543 # This command is used to import a key from a message into
2544 # the user's public key ring.
2548 # set pgp_export_command=""
2550 # Name: pgp_export_command
2555 # This command is used to export a public key from the user's
2560 # set pgp_verify_key_command=""
2562 # Name: pgp_verify_key_command
2567 # This command is used to verify key information from the key selection
2572 # set pgp_list_secring_command=""
2574 # Name: pgp_list_secring_command
2579 # This command is used to list the secret key ring's contents. The
2580 # output format must be analogous to the one used by
2581 # gpg --list-keys --with-colons.
2583 # This format is also generated by the pgpring utility which comes
2588 # set pgp_list_pubring_command=""
2590 # Name: pgp_list_pubring_command
2595 # This command is used to list the public key ring's contents. The
2596 # output format must be analogous to the one used by
2597 # gpg --list-keys --with-colons.
2599 # This format is also generated by the pgpring utility which comes
2604 # set forward_decrypt=yes
2606 # Name: forward_decrypt
2611 # Controls the handling of encrypted messages when forwarding a message.
2612 # When set, the outer layer of encryption is stripped off. This
2613 # variable is only used if ``$mime_forward'' is set and
2614 # ``$mime_forward_decode'' is unset.
2618 # set smime_timeout=300
2620 # Name: smime_timeout
2625 # The number of seconds after which a cached passphrase will expire if
2630 # set smime_encrypt_with=""
2632 # Name: smime_encrypt_with
2637 # This sets the algorithm that should be used for encryption.
2638 # Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128".
2639 # If unset "3des" (TripleDES) is used.
2650 # Since there is no pubring/secring as with PGP, mutt has to handle
2651 # storage ad retrieval of keys/certs by itself. This is very basic right now,
2652 # and stores keys and certificates in two different directories, both
2653 # named as the hash-value retrieved from OpenSSL. There is an index file
2654 # which contains mailbox-address keyid pair, and which can be manually
2655 # edited. This one points to the location of the private keys.
2659 # set smime_ca_location=""
2661 # Name: smime_ca_location
2666 # This variable contains the name of either a directory, or a file which
2667 # contains trusted certificates for use with OpenSSL.
2670 # Note: On Debian systems, this defaults to the first existing file in
2671 # the following list: ~/.smime/ca-certificates.crt ~/.smime/ca-bundle.crt
2672 # /etc/ssl/certs/ca-certificates.crt.
2675 # set smime_certificates=""
2677 # Name: smime_certificates
2682 # Since there is no pubring/secring as with PGP, mutt has to handle
2683 # storage and retrieval of keys by itself. This is very basic right
2684 # now, and keys and certificates are stored in two different
2685 # directories, both named as the hash-value retrieved from
2686 # OpenSSL. There is an index file which contains mailbox-address
2687 # keyid pairs, and which can be manually edited. This one points to
2688 # the location of the certificates.
2692 # set smime_decrypt_command=""
2694 # Name: smime_decrypt_command
2699 # This format string specifies a command which is used to decrypt
2700 # application/x-pkcs7-mime attachments.
2702 # The OpenSSL command formats have their own set of printf-like sequences
2705 # %f Expands to the name of a file containing a message.
2706 # %s Expands to the name of a file containing the signature part
2707 # of a multipart/signed attachment when verifying it.
2708 # %k The key-pair specified with $smime_default_key
2709 # %c One or more certificate IDs.
2710 # %a The algorithm used for encryption.
2711 # %C CA location: Depending on whether $smime_ca_location
2712 # points to a directory or file, this expands to
2713 # "-CApath $smime_ca_location" or "-CAfile $smime_ca_location".
2716 # For examples on how to configure these formats, see the smime.rc in
2717 # the samples/ subdirectory which has been installed on your system
2718 # alongside the documentation.
2722 # set smime_verify_command=""
2724 # Name: smime_verify_command
2729 # This command is used to verify S/MIME signatures of type multipart/signed.
2733 # set smime_verify_opaque_command=""
2735 # Name: smime_verify_opaque_command
2740 # This command is used to verify S/MIME signatures of type
2741 # application/x-pkcs7-mime.
2745 # set smime_sign_command=""
2747 # Name: smime_sign_command
2752 # This command is used to created S/MIME signatures of type
2753 # multipart/signed, which can be read by all mail clients.
2757 # set smime_sign_opaque_command=""
2759 # Name: smime_sign_opaque_command
2764 # This command is used to created S/MIME signatures of type
2765 # application/x-pkcs7-signature, which can only be handled by mail
2766 # clients supporting the S/MIME extension.
2770 # set smime_encrypt_command=""
2772 # Name: smime_encrypt_command
2777 # This command is used to create encrypted S/MIME messages.
2781 # set smime_pk7out_command=""
2783 # Name: smime_pk7out_command
2788 # This command is used to extract PKCS7 structures of S/MIME signatures,
2789 # in order to extract the public X509 certificate(s).
2793 # set smime_get_cert_command=""
2795 # Name: smime_get_cert_command
2800 # This command is used to extract X509 certificates from a PKCS7 structure.
2804 # set smime_get_signer_cert_command=""
2806 # Name: smime_get_signer_cert_command
2811 # This command is used to extract only the signers X509 certificate from a S/MIME
2812 # signature, so that the certificate's owner may get compared to the
2813 # email's 'From'-field.
2817 # set smime_import_cert_command=""
2819 # Name: smime_import_cert_command
2824 # This command is used to import a certificate via smime_keys.
2828 # set smime_get_cert_email_command=""
2830 # Name: smime_get_cert_email_command
2835 # This command is used to extract the mail address(es) used for storing
2836 # X509 certificates, and for verification purposes (to check whether the
2837 # certificate was issued for the sender's mailbox).
2841 # set smime_default_key=""
2843 # Name: smime_default_key
2848 # This is the default key-pair to use for signing. This must be set to the
2849 # keyid (the hash-value that OpenSSL generates) to work properly
2853 # set ssl_force_tls=no
2855 # Name: ssl_force_tls
2860 # If this variable is set, Mutt will require that all connections
2861 # to remote servers be encrypted. Furthermore it will attempt to
2862 # negotiate TLS even if the server does not advertise the capability,
2863 # since it would otherwise have to abort the connection anyway. This
2864 # option supersedes ``$ssl_starttls''.
2867 # set ssl_starttls=yes
2869 # Name: ssl_starttls
2874 # If set (the default), mutt will attempt to use STARTTLS on servers
2875 # advertising the capability. When unset, mutt will not attempt to
2876 # use STARTTLS regardless of the server's capabilities.
2879 # set certificate_file="~/.mutt_certificates"
2881 # Name: certificate_file
2883 # Default: "~/.mutt_certificates"
2886 # This variable specifies the file where the certificates you trust
2887 # are saved. When an unknown certificate is encountered, you are asked
2888 # if you accept it or not. If you accept it, the certificate can also
2889 # be saved in this file and further connections are automatically
2892 # You can also manually add CA certificates in this file. Any server
2893 # certificate that is signed with one of these CA certificates are
2894 # also automatically accepted.
2896 # Example: set certificate_file=~/.mutt/certificates
2899 # set ssl_use_sslv3=yes
2901 # Name: ssl_use_sslv3
2906 # This variables specifies whether to attempt to use SSLv3 in the
2907 # SSL authentication process.
2910 # set ssl_use_tlsv1=yes
2912 # Name: ssl_use_tlsv1
2917 # This variables specifies whether to attempt to use TLSv1 in the
2918 # SSL authentication process.
2921 # set ssl_min_dh_prime_bits=0
2923 # Name: ssl_min_dh_prime_bits
2928 # This variable specifies the minimum acceptable prime size (in bits)
2929 # for use in any Diffie-Hellman key exchange. A value of 0 will use
2930 # the default from the GNUTLS library.
2933 # set ssl_ca_certificates_file=""
2935 # Name: ssl_ca_certificates_file
2940 # This variable specifies a file containing trusted CA certificates.
2941 # Any server certificate that is signed with one of these CA
2942 # certificates are also automatically accepted.
2944 # Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
2946 # Note: On Debian systems, this variable defaults to the example
2947 # mentioned. This file is managed by the ``ca-certificates'' package.
2957 # Used in connection with the pipe-message command and the ``tag-
2958 # prefix'' operator. If this variable is unset, when piping a list of
2959 # tagged messages Mutt will concatenate the messages and will pipe them
2960 # as a single folder. When set, Mutt will pipe the messages one by one.
2961 # In both cases the messages are piped in the current sorted order,
2962 # and the ``$pipe_sep'' separator is added after each message.
2965 # set pipe_decode=no
2972 # Used in connection with the pipe-message command. When unset,
2973 # Mutt will pipe the messages without any preprocessing. When set, Mutt
2974 # will weed headers and will attempt to PGP/MIME decode the messages
2986 # The separator to add between messages when piping a list of tagged
2987 # messages to an external Unix command.
2990 # set pop_authenticators=""
2992 # Name: pop_authenticators
2997 # This is a colon-delimited list of authentication methods mutt may
2998 # attempt to use to log in to an POP server, in the order mutt should
2999 # try them. Authentication methods are either 'user', 'apop' or any
3000 # SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'.
3001 # This parameter is case-insensitive. If this parameter is unset
3002 # (the default) mutt will try all available methods, in order from
3003 # most-secure to least-secure.
3005 # Example: set pop_authenticators="digest-md5:apop:user"
3008 # set pop_auth_try_all=yes
3010 # Name: pop_auth_try_all
3015 # If set, Mutt will try all available methods. When unset, Mutt will
3016 # only fall back to other authentication methods if the previous
3017 # methods are unavailable. If a method is available but authentication
3018 # fails, Mutt will not connect to the POP server.
3021 # set pop_checkinterval=60
3023 # Name: pop_checkinterval
3028 # This variable configures how often (in seconds) mutt should look for
3029 # new mail in the currently selected mailbox if it is a POP mailbox.
3032 # set pop_delete=ask-no
3039 # If set, Mutt will delete successfully downloaded messages from the POP
3040 # server when using the fetch-mail function. When unset, Mutt will
3041 # download messages but also leave them on the POP server.
3051 # The name of your POP server for the fetch-mail function. You
3052 # can also specify an alternative port, username and password, ie:
3054 # [pop[s]://][username[:password]@]popserver[:port]
3064 # If this variable is set, mutt will try to use the "LAST" POP command
3065 # for retrieving only unread messages from the POP server when using
3066 # the fetch-mail function.
3069 # set pop_reconnect=ask-yes
3071 # Name: pop_reconnect
3076 # Controls whether or not Mutt will try to reconnect to POP server if
3077 # the connection is lost.
3087 # Your login name on the POP server.
3089 # This variable defaults to your user name on the local machine.
3099 # Specifies the password for your POP account. If unset, Mutt will
3100 # prompt you for your password when you open POP mailbox.
3101 # Warning: you should only use this option when you are on a
3102 # fairly secure machine, because the superuser can read your muttrc
3103 # even if you are the only one who can read the file.
3106 # set post_indent_string=""
3108 # Name: post_indent_string
3113 # Similar to the ``$attribution'' variable, Mutt will append this
3114 # string after the inclusion of a message which is being replied to.
3117 # set postpone=ask-yes
3124 # Controls whether or not messages are saved in the ``$postponed''
3125 # mailbox when you elect not to send immediately.
3128 # set postponed="~/postponed"
3132 # Default: "~/postponed"
3135 # Mutt allows you to indefinitely ``postpone sending a message'' which
3136 # you are editing. When you choose to postpone a message, Mutt saves it
3137 # in the mailbox specified by this variable. Also see the ``$postpone''
3140 set postponed="=drafts"
3149 # If set, a shell command to be executed if mutt fails to establish
3150 # a connection to the server. This is useful for setting up secure
3151 # connections, e.g. with ssh(1). If the command returns a nonzero
3152 # status, mutt gives up opening the server. Example:
3154 # preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net
3155 # sleep 20 < /dev/null > /dev/null"
3157 # Mailbox 'foo' on mailhost.net can now be reached
3158 # as '{localhost:1234}foo'.
3160 # NOTE: For this example to work, you must be able to log in to the
3161 # remote machine without having to enter a password.
3171 # Controls whether or not Mutt really prints messages.
3172 # This is set to ask-no by default, because some people
3173 # accidentally hit ``p'' often (like me).
3176 # set print_command="lpr"
3178 # Name: print_command
3183 # This specifies the command pipe that should be used to print messages.
3185 set print_command="muttprint"
3187 # set print_decode=yes
3189 # Name: print_decode
3194 # Used in connection with the print-message command. If this
3195 # option is set, the message is decoded before it is passed to the
3196 # external command specified by $print_command. If this option
3197 # is unset, no processing will be applied to the message when
3198 # printing it. The latter setting may be useful if you are using
3199 # some advanced printer filter which is able to properly format
3200 # e-mail messages for printing.
3203 # set print_split=no
3210 # Used in connection with the print-message command. If this option
3211 # is set, the command specified by $print_command is executed once for
3212 # each message which is to be printed. If this option is unset,
3213 # the command specified by $print_command is executed only once, and
3214 # all the messages are concatenated, with a form feed as the message
3217 # Those who use the enscript(1) program's mail-printing mode will
3218 # most likely want to set this option.
3222 # set prompt_after=yes
3224 # Name: prompt_after
3229 # If you use an external ``$pager'', setting this variable will
3230 # cause Mutt to prompt you for a command when the pager exits rather
3231 # than returning to the index menu. If unset, Mutt will return to the
3232 # index menu when the external pager exits.
3235 # set query_command=""
3237 # Name: query_command
3242 # This specifies the command that mutt will use to make external address
3243 # queries. The string should contain a %s, which will be substituted
3244 # with the query string the user types. See ``query'' for more
3247 set query_command="lbdbq"
3256 # This variable controls whether ``quit'' and ``exit'' actually quit
3257 # from mutt. If it set to yes, they do quit, if it is set to no, they
3258 # have no effect, and if it is set to ask-yes or ask-no, you are
3259 # prompted for confirmation when you try to quit.
3262 # set quote_regexp="^([ \t]*[|>:}#])+"
3264 # Name: quote_regexp
3265 # Type: regular expression
3266 # Default: "^([ \t]*[|>:}#])+"
3269 # A regular expression used in the internal-pager to determine quoted
3270 # sections of text in the body of a message.
3272 # Note: In order to use the quotedx patterns in the
3273 # internal pager, you need to set this to a regular expression that
3274 # matches exactly the quote characters at the beginning of quoted
3285 # If set to a value greater than 0, Mutt will display which message it
3286 # is currently on when reading a mailbox or when performing search actions
3287 # such as search and limit. The message is printed after
3288 # read_inc messages have been read or searched (e.g., if set to 25, Mutt will
3289 # print a message when it is at message 25, and then again when it gets
3290 # to message 50). This variable is meant to indicate progress when
3291 # reading or searching large mailboxes which may take some time.
3292 # When set to 0, only a single message will appear before the reading
3295 # Also see the ``$write_inc'' variable and the ``Tuning'' section of the
3296 # manual for performance considerations.
3306 # If set, all folders are opened in read-only mode.
3316 # This variable specifies what "real" or "personal" name should be used
3317 # when sending messages.
3319 # By default, this is the GECOS field from /etc/passwd. Note that this
3320 # variable will not be used when the user has set a real name
3321 # in the $from variable.
3324 # set recall=ask-yes
3331 # Controls whether or not Mutt recalls postponed messages
3332 # when composing a new message. Also see ``$postponed''.
3334 # Setting this variable to ``yes'' is not generally useful, and thus not
3339 # set record="~/sent"
3346 # This specifies the file into which your outgoing messages should be
3347 # appended. (This is meant as the primary method for saving a copy of
3348 # your messages, but another way to do this is using the ``my_hdr''
3349 # command to create a Bcc: field with your email address in it.)
3351 # The value of $record is overridden by the ``$force_name'' and
3352 # ``$save_name'' variables, and the ``fcc-hook'' command.
3354 #set record="=outgoing"
3357 # set reply_regexp="^(re([\\[0-9\\]+])*|aw):[ \t]*"
3359 # Name: reply_regexp
3360 # Type: regular expression
3361 # Default: "^(re([\\[0-9\\]+])*|aw):[ \t]*"
3364 # A regular expression used to recognize reply messages when threading
3365 # and replying. The default value corresponds to the English "Re:" and
3368 set reply_regexp="^((re([[(]?[[:digit:]]+[)]]?)?|aw|antwort|wg|sgkb):[[:space:]]*)+"
3377 # If unset and you are replying to a message sent by you, Mutt will
3378 # assume that you want to reply to the recipients of that message rather
3382 # set reply_to=ask-yes
3389 # If set, when replying to a message, Mutt will use the address listed
3390 # in the Reply-to: header as the recipient of the reply. If unset,
3391 # it will use the address in the From: header field instead. This
3392 # option is useful for reading a mailing list that sets the Reply-To:
3393 # header field to the list address and you want to send a private
3394 # message to the author of a message.
3404 # When set, the cursor will be automatically advanced to the next
3405 # (possibly undeleted) message whenever a command that modifies the
3406 # current message is executed.
3409 # set reverse_alias=no
3411 # Name: reverse_alias
3416 # This variable controls whether or not Mutt will display the "personal"
3417 # name from your aliases in the index menu if it finds an alias that
3418 # matches the message's sender. For example, if you have the following
3421 # alias juser abd30425@somewhere.net (Joe User)
3423 # and then you receive mail which contains the following header:
3425 # From: abd30425@somewhere.net
3427 # It would be displayed in the index menu as ``Joe User'' instead of
3428 # ``abd30425@somewhere.net.'' This is useful when the person's e-mail
3429 # address is not human friendly (like CompuServe addresses).
3432 # set reverse_name=no
3434 # Name: reverse_name
3439 # It may sometimes arrive that you receive mail to a certain machine,
3440 # move the messages to another machine, and reply to some the messages
3441 # from there. If this variable is set, the default From: line of
3442 # the reply messages is built using the address where you received the
3443 # messages you are replying to if that address matches your
3444 # alternates. If the variable is unset, or the address that would be
3445 # used doesn't match your alternates, the From: line will use
3446 # your address on the current machine.
3448 set reverse_name=yes
3450 # set reverse_realname=yes
3452 # Name: reverse_realname
3457 # This variable fine-tunes the behaviour of the reverse_name feature.
3458 # When it is set, mutt will use the address from incoming messages as-is,
3459 # possibly including eventual real names. When it is unset, mutt will
3460 # override any such real names with the setting of the realname variable.
3463 # set rfc2047_parameters=no
3465 # Name: rfc2047_parameters
3470 # When this variable is set, Mutt will decode RFC-2047-encoded MIME
3471 # parameters. You want to set this variable when mutt suggests you
3472 # to save attachments to files named like this:
3473 # =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
3475 # When this variable is set interactively, the change doesn't have
3476 # the desired effect before you have changed folders.
3478 # Note that this use of RFC 2047's encoding is explicitly,
3479 # prohibited by the standard, but nevertheless encountered in the
3481 # Also note that setting this parameter will not have the effect
3482 # that mutt generates this kind of encoding. Instead, mutt will
3483 # unconditionally use the encoding specified in RFC 2231.
3485 set rfc2047_parameters=yes
3487 # set save_address=no
3489 # Name: save_address
3494 # If set, mutt will take the sender's full address when choosing a
3495 # default folder for saving a mail. If ``$save_name'' or ``$force_name''
3496 # is set too, the selection of the fcc folder will be changed as well.
3499 # set save_empty=yes
3506 # When unset, mailboxes which contain no saved messages will be removed
3507 # when closed (the exception is ``$spoolfile'' which is never removed).
3508 # If set, mailboxes are never removed.
3510 # Note: This only applies to mbox and MMDF folders, Mutt does not
3511 # delete MH and Maildir directories.
3514 # set save_history=0
3516 # Name: save_history
3521 # This variable controls the size of the history saved in the
3522 # ``$history_file'' file.
3524 set save_history=100
3533 # This variable controls how copies of outgoing messages are saved.
3534 # When set, a check is made to see if a mailbox specified by the
3535 # recipient address exists (this is done by searching for a mailbox in
3536 # the ``$folder'' directory with the username part of the
3537 # recipient address). If the mailbox exists, the outgoing message will
3538 # be saved to that mailbox, otherwise the message is saved to the
3539 # ``$record'' mailbox.
3541 # Also see the ``$force_name'' variable.
3551 # When this variable is unset, scoring is turned off. This can
3552 # be useful to selectively disable scoring for certain folders when the
3553 # ``$score_threshold_delete'' variable and friends are used.
3556 # set score_threshold_delete=-1
3558 # Name: score_threshold_delete
3563 # Messages which have been assigned a score equal to or lower than the value
3564 # of this variable are automatically marked for deletion by mutt. Since
3565 # mutt scores are always greater than or equal to zero, the default setting
3566 # of this variable will never mark a message for deletion.
3569 # set score_threshold_flag=9999
3571 # Name: score_threshold_flag
3576 # Messages which have been assigned a score greater than or equal to this
3577 # variable's value are automatically marked "flagged".
3580 # set score_threshold_read=-1
3582 # Name: score_threshold_read
3587 # Messages which have been assigned a score equal to or lower than the value
3588 # of this variable are automatically marked as read by mutt. Since
3589 # mutt scores are always greater than or equal to zero, the default setting
3590 # of this variable will never mark a message read.
3593 # set send_charset="us-ascii:iso-8859-1:utf-8"
3595 # Name: send_charset
3597 # Default: "us-ascii:iso-8859-1:utf-8"
3600 # A list of character sets for outgoing messages. Mutt will use the
3601 # first character set into which the text can be converted exactly.
3602 # If your ``$charset'' is not iso-8859-1 and recipients may not
3603 # understand UTF-8, it is advisable to include in the list an
3604 # appropriate widely used standard character set (such as
3605 # iso-8859-2, koi8-r or iso-2022-jp) either instead of or after
3609 # set sendmail="/usr/sbin/sendmail -oem -oi"
3613 # Default: "/usr/sbin/sendmail -oem -oi"
3616 # Specifies the program and arguments used to deliver mail sent by Mutt.
3617 # Mutt expects that the specified program interprets additional
3618 # arguments as recipient addresses.
3620 #set sendmail="/bin/true"
3621 #set sendmail="~/.mutt/sendmail"
3623 # set sendmail_wait=0
3625 # Name: sendmail_wait
3630 # Specifies the number of seconds to wait for the ``$sendmail'' process
3631 # to finish before giving up and putting delivery in the background.
3633 # Mutt interprets the value of this variable as follows:
3634 # >0 number of seconds to wait for sendmail to finish before continuing
3635 # 0 wait forever for sendmail to finish
3636 # <0 always put sendmail in the background without waiting
3639 # Note that if you specify a value other than 0, the output of the child
3640 # process will be put in a temporary file. If there is some error, you
3641 # will be informed as to where to find the output.
3651 # Command to use when spawning a subshell. By default, the user's login
3652 # shell from /etc/passwd is used.
3655 # set sig_dashes=yes
3662 # If set, a line containing ``-- '' will be inserted before your
3663 # ``$signature''. It is strongly recommended that you not unset
3664 # this variable unless your ``signature'' contains just your name. The
3665 # reason for this is because many software packages use ``-- \n'' to
3666 # detect your signature. For example, Mutt has the ability to highlight
3667 # the signature in a different color in the builtin pager.
3678 # If set, the signature will be included before any quoted or forwarded
3679 # text. It is strongly recommended that you do not set this variable
3680 # unless you really know what you are doing, and are prepared to take
3681 # some heat from netiquette guardians.
3684 # set signature="~/.signature"
3688 # Default: "~/.signature"
3691 # Specifies the filename of your signature, which is appended to all
3692 # outgoing messages. If the filename ends with a pipe (``|''), it is
3693 # assumed that filename is a shell command and input should be read from
3696 #set signature="~/.mutt/getsignature|"
3698 # set simple_search="~f %s | ~s %s"
3700 # Name: simple_search
3702 # Default: "~f %s | ~s %s"
3705 # Specifies how Mutt should expand a simple search into a real search
3706 # pattern. A simple search is one that does not contain any of the ~
3707 # operators. See ``patterns'' for more information on search patterns.
3709 # For example, if you simply type joe at a search or limit prompt, Mutt
3710 # will automatically expand it to the value specified by this variable.
3711 # For the default value it would be:
3714 set simple_search="~L %s | ~s %s"
3716 # set smart_wrap=yes
3723 # Controls the display of lines longer than the screen width in the
3724 # internal pager. If set, long lines are wrapped at a word boundary. If
3725 # unset, lines are simply wrapped at the screen edge. Also see the
3726 # ``$markers'' variable.
3729 # set smileys="(>From )|(:[-^]?[][)(><}{|/DP])"
3732 # Type: regular expression
3733 # Default: "(>From )|(:[-^]?[][)(><}{|/DP])"
3736 # The pager uses this variable to catch some common false
3737 # positives of ``$quote_regexp'', most notably smileys in the beginning
3748 # Specifies time, in seconds, to pause while displaying certain informational
3749 # messages, while moving from folder to folder and after expunging
3750 # messages from the current folder. The default is to pause one second, so
3751 # a value of zero for this option suppresses the pause.
3754 # set smtp_authenticators=""
3756 # Name: smtp_authenticators
3761 # This is a colon-delimited list of authentication methods mutt may
3762 # attempt to use to log in to an SMTP server, in the order mutt should
3763 # try them. Authentication methods are any SASL mechanism, eg
3764 # ``digest-md5'', ``gssapi'' or ``cram-md5''.
3765 # This parameter is case-insensitive. If this parameter is unset
3766 # (the default) mutt will try all available methods, in order from
3767 # most-secure to least-secure.
3769 # Example: set smtp_authenticators="digest-md5:cram-md5"
3779 # Specifies the password for your SMTP account. If unset, Mutt will
3780 # prompt you for your password when you first send mail via SMTP.
3781 # See ``smtp_url'' to configure mutt to send mail via SMTP.
3782 # Warning: you should only use this option when you are on a
3783 # fairly secure machine, because the superuser can read your muttrc even
3784 # if you are the only one who can read the file.
3794 # Defines the SMTP ``smart'' host where sent messages should relayed for
3795 # delivery. This should take the form of an SMTP URL, eg:
3797 # smtp[s]://[user[:pass]@]host[:port]/
3799 # Setting this variable overrides the value of the ``$sendmail''
3810 # Specifies how to sort messages in the index menu. Valid values
3816 # mailbox-order (unsorted)
3824 # You may optionally use the reverse- prefix to specify reverse sorting
3825 # order (example: set sort=reverse-date-sent).
3827 # Note: On Debian systems, this option is set by default to
3828 # ``threads'' in /etc/Muttrc.
3831 # set sort_alias=alias
3838 # Specifies how the entries in the `alias' menu are sorted. The
3839 # following are legal values:
3841 # address (sort alphabetically by email address)
3842 # alias (sort alphabetically by alias name)
3843 # unsorted (leave in order specified in .muttrc)
3853 # When sorting by threads, this variable controls how threads are sorted
3854 # in relation to other threads, and how the branches of the thread trees
3855 # are sorted. This can be set to any value that ``$sort'' can, except
3856 # threads (in that case, mutt will just use date-sent). You can also
3857 # specify the last- prefix in addition to the reverse- prefix, but last-
3858 # must come after reverse-. The last- prefix causes messages to be
3859 # sorted against its siblings by which has the last descendant, using
3860 # the rest of sort_aux as an ordering. For instance, set sort_aux=last-
3861 # date-received would mean that if a new message is received in a
3862 # thread, that thread becomes the last one displayed (or the first, if
3863 # you have set sort=reverse-threads.) Note: For reversed ``$sort''
3864 # order $sort_aux is reversed again (which is not the right thing to do,
3865 # but kept to not break any existing configuration setting).
3867 set sort_aux=last-date-received
3869 # set sort_browser=alpha
3871 # Name: sort_browser
3876 # Specifies how to sort entries in the file browser. By default, the
3877 # entries are sorted alphabetically. Valid values:
3879 # alpha (alphabetically)
3884 # You may optionally use the reverse- prefix to specify reverse sorting
3885 # order (example: set sort_browser=reverse-date).
3895 # This variable is only useful when sorting by threads with
3896 # ``$strict_threads'' unset. In that case, it changes the heuristic
3897 # mutt uses to thread messages by subject. With sort_re set, mutt will
3898 # only attach a message as the child of another message by subject if
3899 # the subject of the child message starts with a substring matching the
3900 # setting of ``$reply_regexp''. With sort_re unset, mutt will attach
3901 # the message whether or not this is the case, as long as the
3902 # non-``$reply_regexp'' parts of both messages are identical.
3905 # set spam_separator=","
3907 # Name: spam_separator
3912 # ``spam_separator'' controls what happens when multiple spam headers
3913 # are matched: if unset, each successive header will overwrite any
3914 # previous matches value for the spam label. If set, each successive
3915 # match will append to the previous, using ``spam_separator'' as a
3926 # If your spool mailbox is in a non-default place where Mutt cannot find
3927 # it, you can specify its location with this variable. Mutt will
3928 # automatically set this variable to the value of the environment
3929 # variable $MAIL if it is not set.
3932 # set status_chars="-*%A"
3934 # Name: status_chars
3939 # Controls the characters used by the "%r" indicator in
3940 # ``$status_format''. The first character is used when the mailbox is
3941 # unchanged. The second is used when the mailbox has been changed, and
3942 # it needs to be resynchronized. The third is used if the mailbox is in
3943 # read-only mode, or if the mailbox will not be written when exiting
3944 # that mailbox (You can toggle whether to write changes to a mailbox
3945 # with the toggle-write operation, bound by default to "%"). The fourth
3946 # is used to indicate that the current folder has been opened in attach-
3947 # message mode (Certain operations like composing a new mail, replying,
3948 # forwarding, etc. are not permitted in this mode).
3951 # set status_format="-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
3953 # Name: status_format
3955 # Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---"
3958 # Controls the format of the status line displayed in the index
3959 # menu. This string is similar to ``$index_format'', but has its own
3960 # set of printf()-like sequences:
3962 # %b number of mailboxes with new mail *
3963 # %d number of deleted messages *
3964 # %f the full pathname of the current mailbox
3965 # %F number of flagged messages *
3967 # %l size (in bytes) of the current mailbox *
3968 # %L size (in bytes) of the messages shown
3969 # (i.e., which match the current limit) *
3970 # %m the number of messages in the mailbox *
3971 # %M the number of messages shown (i.e., which match the current limit) *
3972 # %n number of new messages in the mailbox *
3973 # %o number of old unread messages *
3974 # %p number of postponed messages *
3975 # %P percentage of the way through the index
3976 # %r modified/read-only/won't-write/attach-message indicator,
3977 # according to $status_chars
3978 # %s current sorting mode ($sort)
3979 # %S current aux sorting method ($sort_aux)
3980 # %t number of tagged messages *
3981 # %u number of unread messages *
3982 # %v Mutt version string
3983 # %V currently active limit pattern, if any *
3984 # %>X right justify the rest of the string and pad with "X"
3985 # %|X pad to the end of the line with "X"
3988 # * = can be optionally printed if nonzero
3990 # Some of the above sequences can be used to optionally print a string
3991 # if their value is nonzero. For example, you may only want to see the
3992 # number of flagged messages if such messages exist, since zero is not
3993 # particularly meaningful. To optionally print a string based upon one
3994 # of the above sequences, the following construct is used:
3996 # %?<sequence_char>?<optional_string>?
3998 # where sequence_char is a character from the table above, and
3999 # optional_string is the string you would like printed if
4000 # sequence_char is nonzero. optional_string may contain
4001 # other sequences as well as normal text, but you may not nest
4004 # Here is an example illustrating how to optionally print the number of
4005 # new messages in a mailbox:
4006 # %?n?%n new messages.?
4008 # You can also switch between two strings using the following construct:
4010 # %?<sequence_char>?<if_string>&<else_string>?
4012 # If the value of sequence_char is non-zero, if_string will
4013 # be expanded, otherwise else_string will be expanded.
4015 # You can force the result of any printf-like sequence to be lowercase
4016 # by prefixing the sequence character with an underscore (_) sign.
4017 # For example, if you want to display the local hostname in lowercase,
4021 # If you prefix the sequence character with a colon (:) character, mutt
4022 # will replace any dots in the expansion by underscores. This might be helpful
4023 # with IMAP folders that don't like dots in folder names.
4025 set status_format=" %r %f [m:%?M?%M/?%m%?n? n:%n?%?o? o:%o?%?d? d:%d?%?F? f:%F?%?t? t:%t?%?p? p:%p?%?b? i:%b?%?l? %l?] %?V?[%V] ?(%s/%S) %> (%P) "
4027 # set status_on_top=no
4029 # Name: status_on_top
4034 # Setting this variable causes the ``status bar'' to be displayed on
4035 # the first line of the screen rather than near the bottom.
4038 # set strict_threads=no
4040 # Name: strict_threads
4045 # If set, threading will only make use of the ``In-Reply-To'' and
4046 # ``References'' fields when you ``$sort'' by message threads. By
4047 # default, messages with the same subject are grouped together in
4048 # ``pseudo threads.''. This may not always be desirable, such as in a
4049 # personal mailbox where you might have several unrelated messages with
4050 # the subject ``hi'' which will get grouped together. See also
4051 # ``$sort_re'' for a less drastic way of controlling this
4062 # When unset, mutt won't stop when the user presses the terminal's
4063 # susp key, usually ``control-Z''. This is useful if you run mutt
4064 # inside an xterm using a command like xterm -e mutt.
4067 # set text_flowed=no
4074 # When set, mutt will generate text/plain; format=flowed attachments.
4075 # This format is easier to handle for some mailing software, and generally
4076 # just looks like ordinary text. To actually make use of this format's
4077 # features, you'll need support in your editor.
4079 # Note that $indent_string is ignored when this option is set.
4082 # set thread_received=no
4084 # Name: thread_received
4089 # When set, mutt uses the date received rather than the date sent
4090 # to thread messages by subject.
4093 # set thorough_search=no
4095 # Name: thorough_search
4100 # Affects the ~b and ~h search operations described in
4101 # section ``patterns'' above. If set, the headers and attachments of
4102 # messages to be searched are decoded before searching. If unset,
4103 # messages are searched as they appear in the folder.
4105 set thorough_search=yes
4114 # When set, the internal-pager will pad blank lines to the bottom of the
4115 # screen with a tilde (~).
4125 # This variable controls the number of seconds Mutt will wait
4126 # for a key to be pressed in the main menu before timing out and
4127 # checking for new mail. A value of zero or less will cause Mutt
4128 # to never time out.
4138 # This variable allows you to specify where Mutt will place its
4139 # temporary files needed for displaying and composing messages. If
4140 # this variable is not set, the environment variable TMPDIR is
4141 # used. If TMPDIR is not set then "/tmp" is used.
4145 # set to_chars=" +TCFL"
4152 # Controls the character used to indicate mail addressed to you. The
4153 # first character is the one used when the mail is NOT addressed to your
4154 # address (default: space). The second is used when you are the only
4155 # recipient of the message (default: +). The third is when your address
4156 # appears in the TO header field, but you are not the only recipient of
4157 # the message (default: T). The fourth character is used when your
4158 # address is specified in the CC header field, but you are not the only
4159 # recipient. The fifth character is used to indicate mail that was sent
4160 # by you. The sixth character is used to indicate when a mail
4161 # was sent to a mailing-list you subscribe to (default: L).
4171 # If set, this variable specifies the path of the trash folder where the
4172 # mails marked for deletion will be moved, instead of being irremediably
4175 # NOTE: When you delete a message in the trash folder, it is really
4176 # deleted, so that you have a way to clean the trash.
4186 # Setting this variable will cause mutt to open a pipe to a command
4187 # instead of a raw socket. You may be able to use this to set up
4188 # preauthenticated connections to your IMAP/POP3 server. Example:
4190 # tunnel="ssh -q mailhost.net /usr/local/libexec/imapd"
4192 # NOTE: For this example to work you must be able to log in to the remote
4193 # machine without having to enter a password.
4196 # set use_8bitmime=no
4198 # Name: use_8bitmime
4203 # Warning: do not set this variable unless you are using a version
4204 # of sendmail which supports the -B8BITMIME flag (such as sendmail
4205 # 8.8.x) or you may not be able to send mail.
4207 # When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME
4208 # flag when sending 8-bit messages to enable ESMTP negotiation.
4211 # set use_domain=yes
4218 # When set, Mutt will qualify all local addresses (ones without the
4219 # @host portion) with the value of ``$hostname''. If unset, no
4220 # addresses will be qualified.
4223 # set use_envelope_from=no
4225 # Name: use_envelope_from
4230 # When set, mutt will use ``$envelope_from_address'' as the
4231 # envelope sender if that is set, otherwise it will attempt to
4232 # derive it from the "From:" header. Note that this information is passed
4233 # to sendmail command using the "-f" command line switch, so don't set this
4234 # option if you are using that switch in $sendmail yourself,
4235 # or if the sendmail on your machine doesn't support that command
4246 # When set, Mutt will generate the `From:' header field when
4247 # sending messages. If unset, no `From:' header field will be
4248 # generated unless the user explicitly sets one using the ``my_hdr''
4259 # When set, Mutt will show you international domain names decoded.
4260 # Note: You can use IDNs for addresses even if this is unset.
4261 # This variable only affects decoding.
4271 # When set, Mutt will look for IPv6 addresses of hosts it tries to
4272 # contact. If this option is unset, Mutt will restrict itself to IPv4 addresses.
4273 # Normally, the default should work.
4276 # set user_agent=yes
4283 # When set, mutt will add a "User-Agent" header to outgoing
4284 # messages, indicating which version of mutt was used for composing
4295 # Specifies the visual editor to invoke when the ~v command is
4296 # given in the builtin editor.
4306 # Controls whether Mutt will ask you to press a key after shell-
4307 # escape, pipe-message, pipe-entry, print-message,
4308 # and print-entry commands.
4310 # It is also used when viewing attachments with ``auto_view'', provided
4311 # that the corresponding mailcap entry has a needsterminal flag,
4312 # and the external program is interactive.
4314 # When set, Mutt will always ask for a key. When unset, Mutt will wait
4315 # for a key only if the external command returned a non-zero status.
4326 # When set, mutt will weed headers when displaying, forwarding,
4327 # printing, or replying to messages.
4337 # When set to a positive value, mutt will wrap text at $wrap characters.
4338 # When set to a negative value, mutt will wrap text so that there are $wrap
4339 # characters of empty space on the right side of the terminal.
4343 # set wrap_search=yes
4350 # Controls whether searches wrap around the end of the mailbox.
4352 # When set, searches will wrap around the first (or last) message. When
4353 # unset, searches will not wrap.
4363 # (DEPRECATED) Equivalent to setting wrap with a negative value.
4373 # When writing a mailbox, a message will be printed every
4374 # write_inc messages to indicate progress. If set to 0, only a
4375 # single message will be displayed before writing a mailbox.
4377 # Also see the ``$read_inc'' variable.
4387 # Controls whether mutt writes out the Bcc header when preparing
4388 # messages to be sent. Exim users may wish to unset this. If mutt
4389 # is set to deliver directly via SMTP (see ``$smtp_url''), this
4390 # option does nothing: mutt will never write out the BCC header
4393 # Note: On Debian systems, exim4 and postfix strip BCC headers by
4394 # default. The above warning applies to exim3 users, see /etc/Muttrc.
4397 # set xterm_icon="M%?n?AIL&ail?"
4401 # Default: "M%?n?AIL&ail?"
4404 # Controls the format of the icon title, as long as xterm_set_titles
4405 # is enabled. This string is identical in formatting to the one used by
4406 # ``$status_format''.
4409 # set xterm_set_titles=no
4411 # Name: xterm_set_titles
4416 # Controls whether mutt sets the xterm title bar and icon name
4417 # (as long as you are in an appropriate terminal).
4419 set xterm_set_titles=yes
4421 # set xterm_title="Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
4425 # Default: "Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?"
4428 # Controls the format of the title bar of the xterm provided that
4429 # xterm_set_titles has been set. This string is identical in formatting
4430 # to the one used by ``$status_format''.
4432 set xterm_title="mutt@%h [%?M?%M/?%m, n:%n]%?V? [%V]?"
4435 alternative_order text/enriched text/plain text application/postscript image/*
4437 source $my_confdir/colours
4438 source $my_confdir/headers
4439 source $my_confdir/alternates
4440 source $my_confdir/keybindings
4441 source $my_confdir/lists
4442 source $my_confdir/spam
4443 source $my_confdir/hooks
4445 set my_mailboxes = `ls ~/.var/offlineimap/mailboxes 2>/dev/null || echo /dev/null`
4446 source $my_mailboxes